撤回: FCE tool retrieve edk2 bios fd( build by linux gcc) failed

撤回: FCE tool retrieve edk2 bios fd( build by linux gcc) failed

[xujiawu]

xujiawu 将撤回邮件“FCE tool retrieve edk2 bios fd( build by linux gcc)
failed”。

Re: FCE tool parse edk2 bios fd( build by linux gcc) failed

[Gao, Liming]

I know BaseTools has one issue to parse GCC map file. It may cause this issue. But, BaseTools issue has been fixed in edk2 3e7e8571da891122c6821ebc428ce6dbd8a35ff3. 

Could you try the latest edk2 trunk?

Thanks
Liming
>-----Original Message-----
>From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
>xujiawu
>Sent: Friday, February 24, 2017 2:59 PM
>To: edk2-devel@ml01.01.org
>Cc: 'Daisy Wang' <daisywang@byosoft.com.cn>; 'xujiawu'
><xujiawu@byosoft.com.cn>
>Subject: [edk2] FCE tool parse edk2 bios fd( build by linux gcc) failed
>
>Hello, edk2-devel
>
>    I want to report a bug about fce tool:
>
>Fce tool parse edk2 bios fd( build by linux gcc) failed
>
>
>
>Reproduce step:
>
>1.      Build OVMF.fd by linux gcc (ubuntu14.04, gcc version 4.85)
>
>2.      Command: Fce read -i OVMF.fd
>
>3.      Fce Failed and show: error while parse the FFS file.
>
>
>
>I want to know if fce tool doesn't support parse edk2 bios fd build by linux
>gcc.
>
>
>
>Thanks,
>
>Robin
>
>_______________________________________________
>edk2-devel mailing list
>edk2-devel@lists.01.org
>https://lists.01.org/mailman/listinfo/edk2-devel

答复: FCE tool parse edk2 bios fd( build by linux gcc) failed

[xujiawu]

HI, Liming,
Thanks for your fast and kindly reply.
I will try the latest edk2 as your suggestion.

BR,
Robin.

-----邮件原件-----
发件人: Gao, Liming [mailto:liming.gao@intel.com] 
发送时间: 2017年2月24日 15:43
收件人: xujiawu; edk2-devel@ml01.01.org
抄送: 'Daisy Wang'
主题: RE: [edk2] FCE tool parse edk2 bios fd( build by linux gcc) failed

I know BaseTools has one issue to parse GCC map file. It may cause this
issue. But, BaseTools issue has been fixed in edk2
3e7e8571da891122c6821ebc428ce6dbd8a35ff3. 

Could you try the latest edk2 trunk?

Thanks
Liming
>-----Original Message-----
>From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
>xujiawu
>Sent: Friday, February 24, 2017 2:59 PM
>To: edk2-devel@ml01.01.org
>Cc: 'Daisy Wang' <daisywang@byosoft.com.cn>; 'xujiawu'
><xujiawu@byosoft.com.cn>
>Subject: [edk2] FCE tool parse edk2 bios fd( build by linux gcc) failed
>
>Hello, edk2-devel
>
>    I want to report a bug about fce tool:
>
>Fce tool parse edk2 bios fd( build by linux gcc) failed
>
>
>
>Reproduce step:
>
>1.      Build OVMF.fd by linux gcc (ubuntu14.04, gcc version 4.85)
>
>2.      Command: Fce read -i OVMF.fd
>
>3.      Fce Failed and show: error while parse the FFS file.
>
>
>
>I want to know if fce tool doesn't support parse edk2 bios fd build by
linux
>gcc.
>
>
>
>Thanks,
>
>Robin
>
>_______________________________________________
>edk2-devel mailing list
>edk2-devel@lists.01.org
>https://lists.01.org/mailman/listinfo/edk2-devel

Re: report an issue about edk2 iscsi

[Ye, Ting]

Hi Robin,

Since you configured the attempt as following:

   Set: Connection retry count: 5, connection establishing timeout to [5000]


iSCSI driver will try to connect to iSCSI target in 6 times, each time it uses 5 seconds as the timeout value.
So you need hold > 30 seconds in your case.


Thanks,
Ting

-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of xujiawu
Sent: Wednesday, July 4, 2018 10:25 AM
To: edk2-devel@ml01.01.org
Subject: [edk2] report an issue about edk2 iscsi

 

Hello, edk2-devel,

    I want to report a issue about edk2 iscsi:

Set timeout to 5S and copy a big file from iscsi HDD,  disconnect Lan cable
>>5S then connect again, the big file still copy successfully.

 

BIOS: the latest EDK2

 

Test steps:

1.Power on and press Hotkey to bios setup, in Advanced menu->iscsi
configuration->mac address.

2.ISCSI initiator name: iqn.

3. Add an attempt: 

   set: iscsi attempt name: 1

   set: iscsi mode: enable/enable for mpio, internet protocol ipv4

   Set: Connection retry count: 5, connection establishing timeout to [5000]

   Set: enable DHCP, enable get target info via DHCP

   Set: authentication type: none

4. Saved and exit, reboot.

5. Boot to shell, type: fs2:(ISCSI HDD).

6. Plug USB 3.0 flash disk to board.

7. Copy a big file from ISCSI HDD to usb.

8. Plug out LAN cable and hold some time( >> timeout time 5s), then plug in again.

 

Actual result:

The copy file still can successful with ISCSI after timeout.

 

Expected result:

The copy file is copied fail with iSCSI after timeout.

 

 

Thanks,

Robin

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel