From: "xueshengfeng" <xueshengfeng@byosoft.com.cn>
To: "'gaoliming'" <gaoliming@byosoft.com.cn>, <devel@edk2.groups.io>,
<jian.j.wang@intel.com>
Cc: <heinrich.schuchardt@canonical.com>, <edhaya.chandran@arm.com>,
<samer.el-haj-mahmoud@arm.com>, "'lijun10x'" <junx1.li@intel.com>,
"'Sunny Wang'" <sunny.wang@arm.com>
Subject: Re: [PATCH] MdeModulePkg/Library: PcdAcpiS3Enable set FALSE cause Assert
Date: Wed, 15 Feb 2023 12:17:54 +0800 [thread overview]
Message-ID: <000001d940f4$7a5a5ac0$6f0f1040$@byosoft.com.cn> (raw)
In-Reply-To: <047601d940f1$df2748d0$9d75da70$@byosoft.com.cn>
Hi Liming,
Yes, it is good to us if catch this stable tag 202302.
Thank you very much
-----邮件原件-----
发件人: gaoliming [mailto:gaoliming@byosoft.com.cn]
发送时间: 2023年2月15日 11:59
收件人: 'xueshengfeng'; devel@edk2.groups.io; jian.j.wang@intel.com
抄送: heinrich.schuchardt@canonical.com; edhaya.chandran@arm.com; samer.el-haj-mahmoud@arm.com; 'lijun10x'; 'Sunny Wang'
主题: 回复: [PATCH] MdeModulePkg/Library: PcdAcpiS3Enable set FALSE cause Assert
Xueshengfeng:
This patch is good to me. Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Does this patch plan to catch this stable tag 202302?
Thanks
Liming
> -----邮件原件-----
> 发件人: xueshengfeng <xueshengfeng@byosoft.com.cn>
> 发送时间: 2023年2月2日 14:21
> 收件人: devel@edk2.groups.io; jian.j.wang@intel.com;
> gaoliming@byosoft.com.cn
> 抄送: heinrich.schuchardt@canonical.com; edhaya.chandran@arm.com;
> samer.el-haj-mahmoud@arm.com; lijun10x <junx1.li@intel.com>; Sunny
> Wang <sunny.wang@arm.com>
> 主题: [PATCH] MdeModulePkg/Library: PcdAcpiS3Enable set FALSE cause
> Assert
>
> From: lijun10x <junx1.li@intel.com>
>
> Some platforms don't support S3 with PcdAcpiS3Enable set as False.
> Debug mode bios will ASSERT at this time as Follows.
> ASSERT_RETURN_ERROR (Status = Out of Resources)
> DXE_ASSERT!:
> Edk2\MdePkg\Library\BaseS3PciSegmentLib\S3PciSegmentLib.c
> (61): !(((INTN)(RETURN_STATUS)(Status)) < 0)
>
> Steps to reproduce the issue:
> 1.Set PcdAcpiS3Enable to FALSE.
> 2.Build the bios in debug mode.
> 3.Power on and Check the serial log.
> Note: Prerequisite is that S3PciSegmentLib is Called and
> the caller's code is run.
>
> Root Cause:
> S3PciSegmentLib call S3BootScriptLib controlled by PcdAcpiS3Enable.
> If PcdAcpiS3Enable set as false, S3BootScriptLib will return error
> status(Out of Resources).
> S3PciSegmentLib will ASSERT if S3BootScriptLib return error.
>
> Solution:
> Make S3BootScriptLib return success if PcdAcpiS3Enable was disabled,
> which behave as a null S3BootScriptLib instance which just return success
> for no action is required to do.
>
> Signed-off-by: JunX1 Li <junx1.li@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Sunny Wang <sunny.wang@arm.com>
> Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
> Cc: G Edhaya Chandran <edhaya.chandran@arm.com>
> Cc: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@arm.com>
> ---
> .../PiDxeS3BootScriptLib/BootScriptSave.c | 132 ++++++++++++++----
> 1 file changed, 108 insertions(+), 24 deletions(-)
>
> diff --git a/MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptSave.c
> b/MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptSave.c
> index f8d4983d81..b9b8562f14 100644
> --- a/MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptSave.c
> +++ b/MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptSave.c
> @@ -1004,7 +1004,7 @@ S3BootScriptCloseTable (
> @param Buffer The source buffer from which to write data.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> **/
> RETURN_STATUS
> EFIAPI
> @@ -1021,6 +1021,10 @@ S3BootScriptSaveIoWrite (
> UINT8 WidthInByte;
> EFI_BOOT_SCRIPT_IO_WRITE ScriptIoWrite;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> WidthInByte = (UINT8)(0x01 << (Width & 0x03));
>
> //
> @@ -1064,7 +1068,7 @@ S3BootScriptSaveIoWrite (
> @param DataMask A pointer to the data mask to be AND-ed with the
> data read from the register
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> **/
> RETURN_STATUS
> EFIAPI
> @@ -1080,6 +1084,10 @@ S3BootScriptSaveIoReadWrite (
> UINT8 WidthInByte;
> EFI_BOOT_SCRIPT_IO_READ_WRITE ScriptIoReadWrite;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> WidthInByte = (UINT8)(0x01 << (Width & 0x03));
> Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_IO_READ_WRITE) +
> (WidthInByte * 2));
>
> @@ -1114,7 +1122,7 @@ S3BootScriptSaveIoReadWrite (
> @param Buffer The source buffer from which to write the data.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> **/
> RETURN_STATUS
> EFIAPI
> @@ -1130,6 +1138,10 @@ S3BootScriptSaveMemWrite (
> UINT8 WidthInByte;
> EFI_BOOT_SCRIPT_MEM_WRITE ScriptMemWrite;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> WidthInByte = (UINT8)(0x01 << (Width & 0x03));
>
> //
> @@ -1174,7 +1186,7 @@ S3BootScriptSaveMemWrite (
> @param DataMask A pointer to the data mask to be AND-ed with the
> data read from the register.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> **/
> RETURN_STATUS
> EFIAPI
> @@ -1190,6 +1202,10 @@ S3BootScriptSaveMemReadWrite (
> UINT8 WidthInByte;
> EFI_BOOT_SCRIPT_MEM_READ_WRITE ScriptMemReadWrite;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> WidthInByte = (UINT8)(0x01 << (Width & 0x03));
> Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_MEM_READ_WRITE) +
> (WidthInByte * 2));
>
> @@ -1224,7 +1240,7 @@ S3BootScriptSaveMemReadWrite (
> @param Buffer The source buffer from which to write the data.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> @note A known Limitations in the implementation which is 64bits
> operations are not supported.
>
> **/
> @@ -1242,6 +1258,10 @@ S3BootScriptSavePciCfgWrite (
> UINT8 WidthInByte;
> EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE ScriptPciWrite;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> if ((Width == S3BootScriptWidthUint64) ||
> (Width == S3BootScriptWidthFifoUint64) ||
> (Width == S3BootScriptWidthFillUint64))
> @@ -1293,7 +1313,7 @@ S3BootScriptSavePciCfgWrite (
> @param DataMask A pointer to the data mask to be AND-ed.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN__SUCCESS Opcode is added.
> + @retval RETURN__SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> @note A known Limitations in the implementation which is 64bits
> operations are not supported.
>
> **/
> @@ -1311,6 +1331,10 @@ S3BootScriptSavePciCfgReadWrite (
> UINT8 WidthInByte;
> EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE ScriptPciReadWrite;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> if ((Width == S3BootScriptWidthUint64) ||
> (Width == S3BootScriptWidthFifoUint64) ||
> (Width == S3BootScriptWidthFillUint64))
> @@ -1357,7 +1381,7 @@ S3BootScriptSavePciCfgReadWrite (
> @param Buffer The source buffer from which to write the data.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> @note A known Limitations in the implementation which is 64bits
> operations are not supported.
>
> **/
> @@ -1376,6 +1400,10 @@ S3BootScriptSavePciCfg2Write (
> UINT8 WidthInByte;
> EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE ScriptPciWrite2;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> if ((Width == S3BootScriptWidthUint64) ||
> (Width == S3BootScriptWidthFifoUint64) ||
> (Width == S3BootScriptWidthFillUint64))
> @@ -1429,7 +1457,7 @@ S3BootScriptSavePciCfg2Write (
> @param DataMask A pointer to the data mask to be AND-ed.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> @note A known Limitations in the implementation which is 64bits
> operations are not supported.
>
> **/
> @@ -1448,6 +1476,10 @@ S3BootScriptSavePciCfg2ReadWrite (
> UINT8 WidthInByte;
> EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE ScriptPciReadWrite2;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> if ((Width == S3BootScriptWidthUint64) ||
> (Width == S3BootScriptWidthFifoUint64) ||
> (Width == S3BootScriptWidthFillUint64))
> @@ -1601,7 +1633,7 @@ CheckParameters (
> @param Buffer Contains the value of data to execute to the
> SMBUS slave device.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> **/
> RETURN_STATUS
> EFIAPI
> @@ -1618,6 +1650,10 @@ S3BootScriptSaveSmbusExecute (
> UINT8 *Script;
> EFI_BOOT_SCRIPT_SMBUS_EXECUTE ScriptSmbusExecute;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> if (Length == NULL) {
> BufferLength = 0;
> } else {
> @@ -1670,7 +1706,7 @@ S3BootScriptSaveSmbusExecute (
> @param Duration Duration in microseconds of the stall
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> **/
> RETURN_STATUS
> EFIAPI
> @@ -1682,6 +1718,10 @@ S3BootScriptSaveStall (
> UINT8 *Script;
> EFI_BOOT_SCRIPT_STALL ScriptStall;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_STALL));
>
> Script = S3BootScriptGetEntryAddAddress (Length);
> @@ -1710,7 +1750,7 @@ S3BootScriptSaveStall (
> @param Context Argument to be passed into the EntryPoint of the
> code to be dispatched.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> **/
> RETURN_STATUS
> EFIAPI
> @@ -1723,6 +1763,10 @@ S3BootScriptSaveDispatch2 (
> UINT8 *Script;
> EFI_BOOT_SCRIPT_DISPATCH_2 ScriptDispatch2;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_DISPATCH_2));
>
> Script = S3BootScriptGetEntryAddAddress (Length);
> @@ -1762,7 +1806,7 @@ S3BootScriptSaveDispatch2 (
> @param LoopTimes The times of the register polling.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
>
> **/
> RETURN_STATUS
> @@ -1781,6 +1825,10 @@ S3BootScriptSaveMemPoll (
> UINT8 WidthInByte;
> EFI_BOOT_SCRIPT_MEM_POLL ScriptMemPoll;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> WidthInByte = (UINT8)(0x01 << (Width & 0x03));
>
> Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_MEM_POLL) + (WidthInByte
> * 2));
> @@ -1817,7 +1865,7 @@ S3BootScriptSaveMemPoll (
> @param Information Information to be logged in the boot scrpit
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
>
> **/
> RETURN_STATUS
> @@ -1831,6 +1879,10 @@ S3BootScriptSaveInformation (
> UINT8 *Script;
> EFI_BOOT_SCRIPT_INFORMATION ScriptInformation;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> //
> // Truncation check
> //
> @@ -1868,7 +1920,7 @@ S3BootScriptSaveInformation (
> @param String The string to save to boot script table
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
>
> **/
> RETURN_STATUS
> @@ -1889,7 +1941,7 @@ S3BootScriptSaveInformationAsciiString (
> @param EntryPoint Entry point of the code to be dispatched.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> **/
> RETURN_STATUS
> EFIAPI
> @@ -1901,6 +1953,10 @@ S3BootScriptSaveDispatch (
> UINT8 *Script;
> EFI_BOOT_SCRIPT_DISPATCH ScriptDispatch;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_DISPATCH));
>
> Script = S3BootScriptGetEntryAddAddress (Length);
> @@ -1935,7 +1991,7 @@ S3BootScriptSaveDispatch (
> granularity so the delay may be
> longer.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
>
> **/
> RETURN_STATUS
> @@ -1953,6 +2009,10 @@ S3BootScriptSaveIoPoll (
> UINT8 Length;
> EFI_BOOT_SCRIPT_IO_POLL ScriptIoPoll;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> WidthInByte = (UINT8)(0x01 << (Width & 0x03));
> Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_IO_POLL) +
> (WidthInByte * 2));
>
> @@ -1992,7 +2052,7 @@ S3BootScriptSaveIoPoll (
> granularity so the delay may be
> longer.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> @note A known Limitations in the implementation which is 64bits
> operations are not supported.
>
> **/
> @@ -2011,6 +2071,10 @@ S3BootScriptSavePciPoll (
> UINT8 Length;
> EFI_BOOT_SCRIPT_PCI_CONFIG_POLL ScriptPciPoll;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> if ((Width == S3BootScriptWidthUint64) ||
> (Width == S3BootScriptWidthFifoUint64) ||
> (Width == S3BootScriptWidthFillUint64))
> @@ -2058,7 +2122,7 @@ S3BootScriptSavePciPoll (
> granularity so the delay may be
> longer.
>
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
> @note A known Limitations in the implementation which is 64bits
> operations are not supported.
>
> **/
> @@ -2078,6 +2142,10 @@ S3BootScriptSavePci2Poll (
> UINT8 Length;
> EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL ScriptPci2Poll;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> if ((Width == S3BootScriptWidthUint64) ||
> (Width == S3BootScriptWidthFifoUint64) ||
> (Width == S3BootScriptWidthFillUint64))
> @@ -2192,7 +2260,7 @@ S3BootScriptCalculateInsertAddress (
>
> @retval RETURN_OUT_OF_RESOURCES The table is not available.
> @retval RETURN_INVALID_PARAMETER The Position is not a valid
> position in the boot script table.
> - @retval RETURN_SUCCESS Opcode is inserted.
> + @retval RETURN_SUCCESS Opcode is inserted no action is
> required as ACPI S3 was disabled.
> **/
> RETURN_STATUS
> EFIAPI
> @@ -2210,6 +2278,10 @@ S3BootScriptMoveLastOpcode (
> UINT8 *LastOpcode;
> UINT8
> TempBootScriptEntry[BOOT_SCRIPT_NODE_MAX_LENGTH];
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> ValidatePosition = FALSE;
> TempPosition = (Position == NULL) ? NULL : (*Position);
>
> @@ -2297,7 +2369,7 @@ S3BootScriptMoveLastOpcode (
>
> @retval RETURN_INVALID_PARAMETER The Position is not a valid
> position in the boot script table.
> @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> table do operation.
> - @retval RETURN_SUCCESS Opcode is added.
> + @retval RETURN_SUCCESS Opcode is added or no action is
> required as ACPI S3 was disabled.
>
> **/
> RETURN_STATUS
> @@ -2313,6 +2385,10 @@ S3BootScriptLabelInternal (
> UINT8 *Script;
> EFI_BOOT_SCRIPT_INFORMATION ScriptInformation;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> //
> // Truncation check
> //
> @@ -2357,8 +2433,8 @@ S3BootScriptLabelInternal (
> of the inserted opcode in the boot
> script table.
> @param Label Points to the label which will be
> inserted in the boot script table.
>
> - @retval EFI_SUCCESS The operation succeeded. A record
> was added into the
> - specified script table.
> + @retval EFI_SUCCESS The operation succeeded or no action
> is required.
> + A record was added into the
> specified script table if ACPI S3 was enabled.
> @retval EFI_INVALID_PARAMETER The parameter is illegal or the given
> boot script is not supported.
> If the opcode is unknow or not
> supported because of the PCD
> Feature Flags.
> @@ -2381,6 +2457,10 @@ S3BootScriptLabel (
> EFI_BOOT_SCRIPT_TABLE_HEADER TableHeader;
> UINT32 LabelLength;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> //
> // Check NULL Label
> //
> @@ -2443,8 +2523,8 @@ S3BootScriptLabel (
> @param Position2 The positions in the boot script table
> to compare
> @param RelativePosition On return, points to the result of the
> comparison
>
> - @retval EFI_SUCCESS The operation succeeded. A record
> was added into the
> - specified script table.
> + @retval EFI_SUCCESS The operation succeeded or no action
> is required.
> + A record was added into the
> specified script table if ACPI S3 was enabled.
> @retval EFI_INVALID_PARAMETER The parameter is illegal or the given
> boot script is not supported.
> If the opcode is unknow or not
> supported because of the PCD
> Feature Flags.
> @@ -2462,6 +2542,10 @@ S3BootScriptCompare (
> UINT8 *Script;
> UINT32 TableLength;
>
> + if (!mS3BootScriptAcpiS3Enable) {
> + return RETURN_SUCCESS;
> + }
> +
> if (RelativePosition == NULL) {
> return EFI_INVALID_PARAMETER;
> }
> --
> 2.26.2.windows.1
next prev parent reply other threads:[~2023-02-15 4:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-01 10:01 [PATCH] REF： https://bugzilla.tianocore.org/show_bug.cgi?id=4331 xueshengfeng
2023-02-02 3:22 ` 回复: [edk2-devel] " gaoliming
2023-02-15 3:59 ` 回复: [PATCH] MdeModulePkg/Library: PcdAcpiS3Enable set FALSE cause Assert gaoliming
2023-02-15 4:17 ` xueshengfeng [this message]
2023-02-15 5:55 ` gaoliming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000001d940f4$7a5a5ac0$6f0f1040$@byosoft.com.cn' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox