回复: [edk2-devel] [PATCH 1/1] MdePkg: Add new 16550-compatible Serial Port Subtypes to DBG2

["gaoliming" <gaoliming@byosoft.com.cn>]

You can run BaseTools\Scripts\PatchCheck.py -1 to check the patch format. 

Thanks
Liming
> -----邮件原件-----
> 发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表 Sunny Wang
> 发送时间: 2021年5月24日 11:21
> 收件人: Marcin Wojtas <mw@semihalf.com>
> 抄送: devel@edk2.groups.io; michael.d.kinney@intel.com;
> leif@nuviainc.com; ardb+tianocore@kernel.org; Samer El-Haj-Mahmoud
> <Samer.El-Haj-Mahmoud@arm.com>; gjb@semihalf.com;
> upstream@semihalf.com; gaoliming@byosoft.com.cn; Sunny Wang
> <Sunny.Wang@arm.com>
> 主题: Re: [edk2-devel] [PATCH 1/1] MdePkg: Add new 16550-compatible
> Serial Port Subtypes to DBG2
> 
> Add Liming's new email.
> 
> Hi Marcin,
> 
> There seems no LF (0A).
> 1. From the patch I got below in this email, several lines got merged into one
> line.
> >  #define
> EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_SBSA_GENERIC_UART
> 0x000e #define   EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_DCC
> 0x000f #define   EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_BCM2835_UART
> 0x0010+#define
> EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_16550_WITH_GAS
> 0x0012 #define EFI_ACPI_DBG2_PORT_TYPE_1394
> 0x8001 #define   EFI_ACPI_DBG2_PORT_SUBTYPE_1394_STANDARD
> 0x0000 #define EFI_ACPI_DBG2_PORT_TYPE_USB
> 
> 2. In
> https://edk2.groups.io/g/devel/topic/patch_1_1_mdepkg_add_new/830249
> 03?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,83024903, I saw "=0D"
> appending to each line. I'm not sure if this is relevant.
> 
> Moreover, I don't see #1 and #2 in another similar code change
> https://edk2.groups.io/g/devel/message/75283?p=,,,20,0,0,0::relevance,,Md
> ePkg%3A+Update+DBG2+and+SPCR+header+with+NVIDIA+16550+Subtype,2
> 0,2,0,82919032.
> 
> Of course, if this won't cause any issue with pushing the patch, I'm totally fine
> with this.
> 
> Reviewed-by: Sunny Wang <sunny.wang@arm.com>
> 
> 
> Best Regards,
> Sunny Wang
> 
> -----Original Message-----
> From: Marcin Wojtas <mw@semihalf.com>
> Sent: Monday, May 24, 2021 10:21 AM
> To: Sunny Wang <Sunny.Wang@arm.com>
> Cc: devel@edk2.groups.io; michael.d.kinney@intel.com; leif@nuviainc.com;
> ardb+tianocore@kernel.org; Samer El-Haj-Mahmoud
> <Samer.El-Haj-Mahmoud@arm.com>; gjb@semihalf.com;
> upstream@semihalf.com
> Subject: Re: [edk2-devel] [PATCH 1/1] MdePkg: Add new 16550-compatible
> Serial Port Subtypes to DBG2
> 
> Hi Sunny,
> 
> 
> pon., 24 maj 2021 o 04:09 Sunny Wang <Sunny.Wang@arm.com> napisał(a):
> >
> > Looks good, Marcin.
> > However, it looks like something wrong with the line-ending. Could you
> check if your line-ending setting is CR/LF? Did you use
> /edk2/BaseTools/Scripts/PatchCheck.py tool to check your patch? If not, could
> you use it? I expect this tool can catch the line-ending problem.
> 
> The line endings are fine in my repo, I generated and sent the patch as usual.
> 
> And of course prior to sending I ran PatchCheck.py - it complains only about
> too long URL line in the commit message, but the line-endings are ok.
> 
> $ python3
> /home/mw/git/edk2-workspace/edk2/BaseTools/Scripts/PatchCheck.py -1
> Checking git commit: HEAD
> MdePkg: Add new 16550-compatible Serial Port Subtypes to DBG2 WARNING
> - Line 9 of commit message is too long (91 >= 76).
> [1]
> https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-d
> ebug-port-table
> The commit message format passed all checks.
> The code passed all checks.
> 
> Do you check the line endings in a different way?
> 
> Best regards,
> Marcin
> 
> >
> > Best Regards,
> > Sunny Wang
> >
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Marcin
> > Wojtas via groups.io
> > Sent: Sunday, May 23, 2021 5:15 PM
> > To: devel@edk2.groups.io
> > Cc: liming.gao@intel.com; michael.d.kinney@intel.com;
> > leif@nuviainc.com; ardb+tianocore@kernel.org; Samer El-Haj-Mahmoud
> > <Samer.El-Haj-Mahmoud@arm.com>; Sunny Wang
> <Sunny.Wang@arm.com>;
> > gjb@semihalf.com; upstream@semihalf.com; Marcin Wojtas
> > <mw@semihalf.com>
> > Subject: [edk2-devel] [PATCH 1/1] MdePkg: Add new 16550-compatible
> > Serial Port Subtypes to DBG2
> >
> > The Microsoft Debug Port Table 2 (DBG2) specification revision May 31,
> > 2017 adds support for 16550-compatible Serial Port Subtype with
> > parameters defined in Generic Address Structure (GAS) [1]
> >
> > Reflect that in the EDK2 headers.
> >
> > [1]
> > https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi
> > -debug-port-table
> >
> > Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> > ---
> >  MdePkg/Include/IndustryStandard/DebugPort2Table.h
> | 1 +
> >  MdePkg/Include/IndustryStandard/SerialPortConsoleRedirectionTable.h |
> > 5 +++++
> >  2 files changed, 6 insertions(+)
> >
> > diff --git a/MdePkg/Include/IndustryStandard/DebugPort2Table.h
> > b/MdePkg/Include/IndustryStandard/DebugPort2Table.h
> > index 3faa30b76a..9ccfc1b1ee 100644
> > --- a/MdePkg/Include/IndustryStandard/DebugPort2Table.h
> > +++ b/MdePkg/Include/IndustryStandard/DebugPort2Table.h
> > @@ -47,6 +47,7 @@ typedef struct {
> >  #define
> EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_SBSA_GENERIC_UART
> 0x000e #define   EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_DCC
> 0x000f #define   EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_BCM2835_UART
> 0x0010+#define
> EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_16550_WITH_GAS
> 0x0012 #define EFI_ACPI_DBG2_PORT_TYPE_1394
> 0x8001 #define   EFI_ACPI_DBG2_PORT_SUBTYPE_1394_STANDARD
> 0x0000 #define EFI_ACPI_DBG2_PORT_TYPE_USB
> 0x8002diff --git
> a/MdePkg/Include/IndustryStandard/SerialPortConsoleRedirectionTable.h
> b/MdePkg/Include/IndustryStandard/SerialPortConsoleRedirectionTable.h
> > index 2066c7895e..7796796afe 100644
> > ---
> > a/MdePkg/Include/IndustryStandard/SerialPortConsoleRedirectionTable.h
> > +++
> b/MdePkg/Include/IndustryStandard/SerialPortConsoleRedirectionTable.
> > +++ h
> > @@ -100,6 +100,11 @@ typedef struct {
> >  /// #define
> EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_
> BCM2835_UART              0x10 +///+/// 16550-compatible with
> parameters defined in Generic Address Structure+///+#define
> EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_
> 16550_WITH_GAS            0x12+ // // Interrupt Type //--
> > 2.29.0
> >
> >
> >
> > -=-=-=-=-=-=
> > Groups.io Links: You receive all messages sent to this group.
> > View/Reply Online (#75464):
> > https://edk2.groups.io/g/devel/message/75464
> > Mute This Topic: https://groups.io/mt/83024903/5985097
> > Group Owner: devel+owner@edk2.groups.io
> > Unsubscribe: https://edk2.groups.io/g/devel/unsub
> [Sunny.Wang@arm.com]
> > -=-=-=-=-=-=
> >
> >
> > IMPORTANT NOTICE: The contents of this email and any attachments are
> confidential and may also be privileged. If you are not the intended recipient,
> please notify the sender immediately and do not disclose the contents to any
> other person, use it for any purpose, or store or copy the information in any
> medium. Thank you.
> IMPORTANT NOTICE: The contents of this email and any attachments are
> confidential and may also be privileged. If you are not the intended recipient,
> please notify the sender immediately and do not disclose the contents to any
> other person, use it for any purpose, or store or copy the information in any
> medium. Thank you.
> 
> 
> 
>