From: "gaoliming" <gaoliming@byosoft.com.cn>
To: "'Giri Mudusuru'" <girim@apple.com>
Cc: <devel@edk2.groups.io>,
"'Michael D Kinney'" <michael.d.kinney@intel.com>,
"'Zhiguang Liu'" <zhiguang.liu@intel.com>,
"'Andrew Fish'" <afish@apple.com>
Subject: 回复: [PATCH] MdePkg Include: Fix typos
Date: Tue, 16 May 2023 09:19:33 +0800 [thread overview]
Message-ID: <001001d98794$79215f00$6b641d00$@byosoft.com.cn> (raw)
In-Reply-To: <7B84E6D8-CF33-4A29-B053-46F1AEA910AE@apple.com>
Giri:
Edk2 CI enables SpellCheck. Seemly, those typos are not detected by CI. So, I want to confirm which tool do you use.
This patch is good. But, the first changes the existing MACRO name. I am not sure whether there is any code impact.
Thanks
Liming
> -----邮件原件-----
> 发件人: Giri Mudusuru <girim@apple.com>
> 发送时间: 2023年5月15日 10:49
> 收件人: gaoliming <gaoliming@byosoft.com.cn>
> 抄送: devel@edk2.groups.io; Michael D Kinney
> <michael.d.kinney@intel.com>; Zhiguang Liu <zhiguang.liu@intel.com>;
> Andrew Fish <afish@apple.com>; Giri Mudusuru <girim@apple.com>
> 主题: Re: [PATCH] MdePkg Include: Fix typos
>
> Hi Liming,
>
> These typos are found during reviews, sync with open source and other debug.
> Just kept running list and then a simple search and replace in repo.
>
> I have fix for other packages too, just starting with MdePkg to get some
> feedback on size of patch (number of files etc)
>
> I am using VS Code IDE with Code Spell Checker plugin which highlights any
> typos.
>
> Thanks,
> -Giri
>
> > On May 15, 2023, at 7:10 AM, gaoliming <gaoliming@byosoft.com.cn>
> wrote:
> >
> > Giri:
> > How do you find these typos? Which tool do you use to scan the code?
> >
> > Thanks
> > Liming
> >> -----邮件原件-----
> >> 发件人: Giri Mudusuru <girim@apple.com>
> >> 发送时间: 2023年5月12日 18:25
> >> 收件人: devel@edk2.groups.io
> >> 抄送: Giri Mudusuru <girim@apple.com>; Michael D Kinney
> >> <michael.d.kinney@intel.com>; Liming Gao <gaoliming@byosoft.com.cn>;
> >> Zhiguang Liu <zhiguang.liu@intel.com>; Andrew Fish <afish@apple.com>
> >> 主题: [PATCH] MdePkg Include: Fix typos
> >>
> >> compatability->compatibility
> >> EFI_MEDIA_CHNAGED->EFI_MEDIA_CHANGED
> >> Funtion->Function
> >> exhausive->exhaustive
> >> Propery->Property
> >> StartAdress->StartAddress
> >> sucessful->successful
> >> writting->writing
> >>
> >> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> >> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> >> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> >> Cc: Andrew Fish <afish@apple.com>
> >> Signed-off-by: Giri Mudusuru <girim@apple.com>
> >> ---
> >> MdePkg/Include/IndustryStandard/Acpi10.h | 2 +-
> >> MdePkg/Include/Library/DebugLib.h | 50
> >> +++++++++----------
> >> MdePkg/Include/Library/PerformanceLib.h | 2 +-
> >> MdePkg/Include/Library/PostCodeLib.h | 12 ++---
> >> MdePkg/Include/Library/ReportStatusCodeLib.h | 26 +++++-----
> >> MdePkg/Include/Library/S3PciLib.h | 4 +-
> >> MdePkg/Include/Library/S3PciSegmentLib.h | 4 +-
> >> MdePkg/Include/Library/UefiLib.h | 2 +-
> >> MdePkg/Include/Protocol/BlockIo.h | 4 +-
> >> MdePkg/Include/Protocol/BlockIo2.h | 6 +--
> >> MdePkg/Include/Protocol/BlockIoCrypto.h | 2 +-
> >> MdePkg/Include/Protocol/DiskIo.h | 4 +-
> >> MdePkg/Include/Protocol/DiskIo2.h | 6 +--
> >> MdePkg/Include/Protocol/Ip4.h | 4 +-
> >> MdePkg/Include/Protocol/Ip6.h | 4 +-
> >> .../Protocol/NetworkInterfaceIdentifier.h | 4 +-
> >> MdePkg/Include/Protocol/Pkcs7Verify.h | 2 +-
> >> MdePkg/Include/Protocol/RamDisk.h | 2 +-
> >> MdePkg/Include/Protocol/ScsiIo.h | 2 +-
> >> MdePkg/Include/Protocol/ScsiPassThru.h | 2 +-
> >> MdePkg/Include/Protocol/ServiceBinding.h | 2 +-
> >> MdePkg/Include/Protocol/Shell.h | 2 +-
> >> MdePkg/Include/Protocol/ShellDynamicCommand.h | 2 +-
> >> MdePkg/Include/Protocol/Tcp4.h | 4 +-
> >> MdePkg/Include/Protocol/Tcp6.h | 4 +-
> >> MdePkg/Include/Protocol/Udp4.h | 4 +-
> >> MdePkg/Include/Protocol/Udp6.h | 4 +-
> >> MdePkg/Include/Protocol/UfsDeviceConfig.h | 2 +-
> >> MdePkg/Include/Protocol/UgaDraw.h | 2 +-
> >> MdePkg/Include/Protocol/Usb2HostController.h | 2 +-
> >> MdePkg/Include/Protocol/UsbHostController.h | 2 +-
> >> 31 files changed, 87 insertions(+), 87 deletions(-)
> >>
> >> diff --git a/MdePkg/Include/IndustryStandard/Acpi10.h
> >> b/MdePkg/Include/IndustryStandard/Acpi10.h
> >> index 9cc02edb3e..5a47f8a54c 100644
> >> --- a/MdePkg/Include/IndustryStandard/Acpi10.h
> >> +++ b/MdePkg/Include/IndustryStandard/Acpi10.h
> >> @@ -321,7 +321,7 @@ typedef struct {
> >> #define
> >>
> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_MEMOR
> >> Y (0 << 3)
> >>
> >> #define
> >>
> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_RESERV
> >> ED (1 << 3)
> >>
> >> #define
> >> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_ACPI
> >> (2 << 3)
> >>
> >> -#define
> >> EFI_APCI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_NVS
> >> (3 << 3)
> >>
> >> +#define
> >> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_NVS
> >> (3 << 3)
> >>
> >> //
> >>
> >> // Bit [5] : Memory to I/O Translation, _TTP
> >>
> >> //
> >>
> >> diff --git a/MdePkg/Include/Library/DebugLib.h
> >> b/MdePkg/Include/Library/DebugLib.h
> >> index f0c9f64487..56c9e0c781 100644
> >> --- a/MdePkg/Include/Library/DebugLib.h
> >> +++ b/MdePkg/Include/Library/DebugLib.h
> >> @@ -185,8 +185,8 @@ DebugBPrint (
> >>
> >>
> >> Print a message of the form "ASSERT <FileName>(<LineNumber>):
> >> <Description>\n"
> >>
> >> to the debug output device. If
> >> DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
> >>
> >> - PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise,
> > if
> >>
> >> - DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of
> >> PcdDebugProperyMask is set then
> >>
> >> + PcdDebugPropertyMask is set then CpuBreakpoint() is called.
> Otherwise,
> > if
> >>
> >> + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of
> >> PcdDebugPropertyMask is set then
> >>
> >> CpuDeadLoop() is called. If neither of these bits are set, then this
> >> function
> >>
> >> returns immediately after the message is printed to the debug output
> >> device.
> >>
> >> DebugAssert() must actively prevent recursion. If DebugAssert() is
> > called
> >> while
> >>
> >> @@ -234,10 +234,10 @@ DebugClearMemory (
> >> Returns TRUE if ASSERT() macros are enabled.
> >>
> >>
> >>
> >> This function returns TRUE if the
> >> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
> >>
> >> - PcdDebugProperyMask is set. Otherwise, FALSE is returned.
> >>
> >> + PcdDebugPropertyMask is set. Otherwise, FALSE is returned.
> >>
> >>
> >>
> >> - @retval TRUE The
> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
> >> bit of PcdDebugProperyMask is set.
> >>
> >> - @retval FALSE The
> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
> >> bit of PcdDebugProperyMask is clear.
> >>
> >> + @retval TRUE The
> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
> >> bit of PcdDebugPropertyMask is set.
> >>
> >> + @retval FALSE The
> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
> >> bit of PcdDebugPropertyMask is clear.
> >>
> >>
> >>
> >> **/
> >>
> >> BOOLEAN
> >>
> >> @@ -250,10 +250,10 @@ DebugAssertEnabled (
> >> Returns TRUE if DEBUG() macros are enabled.
> >>
> >>
> >>
> >> This function returns TRUE if the
> >> DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
> >>
> >> - PcdDebugProperyMask is set. Otherwise, FALSE is returned.
> >>
> >> + PcdDebugPropertyMask is set. Otherwise, FALSE is returned.
> >>
> >>
> >>
> >> - @retval TRUE The
> DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
> >> bit of PcdDebugProperyMask is set.
> >>
> >> - @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
> bit
> >> of PcdDebugProperyMask is clear.
> >>
> >> + @retval TRUE The
> DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
> >> bit of PcdDebugPropertyMask is set.
> >>
> >> + @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
> bit
> >> of PcdDebugPropertyMask is clear.
> >>
> >>
> >>
> >> **/
> >>
> >> BOOLEAN
> >>
> >> @@ -266,10 +266,10 @@ DebugPrintEnabled (
> >> Returns TRUE if DEBUG_CODE() macros are enabled.
> >>
> >>
> >>
> >> This function returns TRUE if the
> >> DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
> >>
> >> - PcdDebugProperyMask is set. Otherwise, FALSE is returned.
> >>
> >> + PcdDebugPropertyMask is set. Otherwise, FALSE is returned.
> >>
> >>
> >>
> >> - @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED
> bit
> >> of PcdDebugProperyMask is set.
> >>
> >> - @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED
> bit
> >> of PcdDebugProperyMask is clear.
> >>
> >> + @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED
> >> bit of PcdDebugPropertyMask is set.
> >>
> >> + @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED
> bit
> >> of PcdDebugPropertyMask is clear.
> >>
> >>
> >>
> >> **/
> >>
> >> BOOLEAN
> >>
> >> @@ -282,10 +282,10 @@ DebugCodeEnabled (
> >> Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.
> >>
> >>
> >>
> >> This function returns TRUE if the
> >> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
> >>
> >> - PcdDebugProperyMask is set. Otherwise, FALSE is returned.
> >>
> >> + PcdDebugPropertyMask is set. Otherwise, FALSE is returned.
> >>
> >>
> >>
> >> - @retval TRUE The
> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED
> >> bit of PcdDebugProperyMask is set.
> >>
> >> - @retval FALSE The
> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED
> >> bit of PcdDebugProperyMask is clear.
> >>
> >> + @retval TRUE The
> >> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
> >> PcdDebugPropertyMask is set.
> >>
> >> + @retval FALSE The
> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED
> >> bit of PcdDebugPropertyMask is clear.
> >>
> >>
> >>
> >> **/
> >>
> >> BOOLEAN
> >>
> >> @@ -384,7 +384,7 @@ UnitTestDebugAssert (
> >> Macro that calls DebugAssert() if an expression evaluates to FALSE.
> >>
> >>
> >>
> >> If MDEPKG_NDEBUG is not defined and the
> >> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
> >>
> >> - bit of PcdDebugProperyMask is set, then this macro evaluates the
> > Boolean
> >>
> >> + bit of PcdDebugPropertyMask is set, then this macro evaluates the
> >> Boolean
> >>
> >> expression specified by Expression. If Expression evaluates to FALSE,
> >> then
> >>
> >> DebugAssert() is called passing in the source filename, source line
> > number,
> >>
> >> and Expression.
> >>
> >> @@ -410,7 +410,7 @@ UnitTestDebugAssert (
> >> Macro that calls DebugPrint().
> >>
> >>
> >>
> >> If MDEPKG_NDEBUG is not defined and the
> >> DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
> >>
> >> - bit of PcdDebugProperyMask is set, then this macro passes Expression
> to
> >>
> >> + bit of PcdDebugPropertyMask is set, then this macro passes Expression
> > to
> >>
> >> DebugPrint().
> >>
> >>
> >>
> >> @param Expression Expression containing an error level, a format
> >> string,
> >>
> >> @@ -433,7 +433,7 @@ UnitTestDebugAssert (
> >> Macro that calls DebugAssert() if an EFI_STATUS evaluates to an error
> >> code.
> >>
> >>
> >>
> >> If MDEPKG_NDEBUG is not defined and the
> >> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
> >>
> >> - bit of PcdDebugProperyMask is set, then this macro evaluates the
> >> EFI_STATUS
> >>
> >> + bit of PcdDebugPropertyMask is set, then this macro evaluates the
> >> EFI_STATUS
> >>
> >> value specified by StatusParameter. If StatusParameter is an error
> > code,
> >>
> >> then DebugAssert() is called passing in the source filename, source
> > line
> >>
> >> number, and StatusParameter.
> >>
> >> @@ -459,7 +459,7 @@ UnitTestDebugAssert (
> >> Macro that calls DebugAssert() if a RETURN_STATUS evaluates to an
> error
> >> code.
> >>
> >>
> >>
> >> If MDEPKG_NDEBUG is not defined and the
> >> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
> >>
> >> - bit of PcdDebugProperyMask is set, then this macro evaluates the
> >>
> >> + bit of PcdDebugPropertyMask is set, then this macro evaluates the
> >>
> >> RETURN_STATUS value specified by StatusParameter. If
> >> StatusParameter is an
> >>
> >> error code, then DebugAssert() is called passing in the source
> > filename,
> >>
> >> source line number, and StatusParameter.
> >>
> >> @@ -487,7 +487,7 @@ UnitTestDebugAssert (
> >> handle database.
> >>
> >>
> >>
> >> If MDEPKG_NDEBUG is defined or the
> >> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit
> >>
> >> - of PcdDebugProperyMask is clear, then return.
> >>
> >> + of PcdDebugPropertyMask is clear, then return.
> >>
> >>
> >>
> >> If Handle is NULL, then a check is made to see if the protocol
> > specified by
> >> Guid
> >>
> >> is present on any handle in the handle database. If Handle is not
> > NULL,
> >> then
> >>
> >> @@ -528,7 +528,7 @@ UnitTestDebugAssert (
> >> /**
> >>
> >> Macro that marks the beginning of debug source code.
> >>
> >>
> >>
> >> - If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
> >> PcdDebugProperyMask is set,
> >>
> >> + If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
> >> PcdDebugPropertyMask is set,
> >>
> >> then this macro marks the beginning of source code that is included in
> > a
> >> module.
> >>
> >> Otherwise, the source lines between DEBUG_CODE_BEGIN() and
> >> DEBUG_CODE_END()
> >>
> >> are not included in a module.
> >>
> >> @@ -539,7 +539,7 @@ UnitTestDebugAssert (
> >> /**
> >>
> >> The macro that marks the end of debug source code.
> >>
> >>
> >>
> >> - If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
> >> PcdDebugProperyMask is set,
> >>
> >> + If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
> >> PcdDebugPropertyMask is set,
> >>
> >> then this macro marks the end of source code that is included in a
> > module.
> >>
> >> Otherwise, the source lines between DEBUG_CODE_BEGIN() and
> >> DEBUG_CODE_END()
> >>
> >> are not included in a module.
> >>
> >> @@ -550,7 +550,7 @@ UnitTestDebugAssert (
> >> /**
> >>
> >> The macro that declares a section of debug source code.
> >>
> >>
> >>
> >> - If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
> >> PcdDebugProperyMask is set,
> >>
> >> + If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
> >> PcdDebugPropertyMask is set,
> >>
> >> then the source code specified by Expression is included in a module.
> >>
> >> Otherwise, the source specified by Expression is not included in a
> > module.
> >>
> >>
> >>
> >> @@ -563,7 +563,7 @@ UnitTestDebugAssert (
> >> /**
> >>
> >> The macro that calls DebugClearMemory() to clear a buffer to a default
> >> value.
> >>
> >>
> >>
> >> - If the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
> >> PcdDebugProperyMask is set,
> >>
> >> + If the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
> >> PcdDebugPropertyMask is set,
> >>
> >> then this macro calls DebugClearMemory() passing in Address and
> Length.
> >>
> >>
> >>
> >> @param Address The pointer to a buffer.
> >>
> >> @@ -586,13 +586,13 @@ UnitTestDebugAssert (
> >> public data structure to retrieve a pointer to the private data
> > structure.
> >>
> >>
> >>
> >> If MDEPKG_NDEBUG is defined or the
> >> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit
> >>
> >> - of PcdDebugProperyMask is clear, then this macro computes the offset,
> > in
> >> bytes,
> >>
> >> + of PcdDebugPropertyMask is clear, then this macro computes the
> offset,
> > in
> >> bytes,
> >>
> >> of the field specified by Field from the beginning of the data
> > structure
> >> specified
> >>
> >> by TYPE. This offset is subtracted from Record, and is used to return
> > a
> >> pointer
> >>
> >> to a data structure of the type specified by TYPE.
> >>
> >>
> >>
> >> If MDEPKG_NDEBUG is not defined and the
> >> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit
> >>
> >> - of PcdDebugProperyMask is set, then this macro computes the offset, in
> >> bytes,
> >>
> >> + of PcdDebugPropertyMask is set, then this macro computes the offset,
> in
> >> bytes,
> >>
> >> of field specified by Field from the beginning of the data structure
> >> specified
> >>
> >> by TYPE. This offset is subtracted from Record, and is used to compute
> > a
> >> pointer
> >>
> >> to a data structure of the type specified by TYPE. The Signature field
> > of
> >> the
> >>
> >> diff --git a/MdePkg/Include/Library/PerformanceLib.h
> >> b/MdePkg/Include/Library/PerformanceLib.h
> >> index d0f2dfb070..24e60d33d1 100644
> >> --- a/MdePkg/Include/Library/PerformanceLib.h
> >> +++ b/MdePkg/Include/Library/PerformanceLib.h
> >> @@ -10,7 +10,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> >> #define __PERFORMANCE_LIB_H__
> >>
> >>
> >>
> >> ///
> >>
> >> -/// Performance library propery mask bits
> >>
> >> +/// Performance library property mask bits
> >>
> >> ///
> >>
> >> #define PERFORMANCE_LIBRARY_PROPERTY_MEASUREMENT_ENABLED
> >> 0x00000001
> >>
> >>
> >>
> >> diff --git a/MdePkg/Include/Library/PostCodeLib.h
> >> b/MdePkg/Include/Library/PostCodeLib.h
> >> index 80628d7999..5fd6ab3b36 100644
> >> --- a/MdePkg/Include/Library/PostCodeLib.h
> >> +++ b/MdePkg/Include/Library/PostCodeLib.h
> >> @@ -74,9 +74,9 @@ PostCodeWithDescription (
> >> bit of PcdPostCodePropertyMask is set. Otherwise FALSE is returned.
> >>
> >>
> >>
> >> @retval TRUE The
> POST_CODE_PROPERTY_POST_CODE_ENABLED
> >> bit of
> >>
> >> - PcdPostCodeProperyMask is set.
> >>
> >> + PcdPostCodePropertyMask is set.
> >>
> >> @retval FALSE The POST_CODE_PROPERTY_POST_CODE_ENABLED
> >> bit of
> >>
> >> - PcdPostCodeProperyMask is clear.
> >>
> >> + PcdPostCodePropertyMask is clear.
> >>
> >>
> >>
> >> **/
> >>
> >> BOOLEAN
> >>
> >> @@ -92,9 +92,9 @@ PostCodeEnabled (
> >> bit of PcdPostCodePropertyMask is set. Otherwise FALSE is returned.
> >>
> >>
> >>
> >> @retval TRUE The
> >> POST_CODE_PROPERTY_POST_CODE_DESCRIPTION_ENABLED bit of
> >>
> >> - PcdPostCodeProperyMask is set.
> >>
> >> + PcdPostCodePropertyMask is set.
> >>
> >> @retval FALSE The
> >> POST_CODE_PROPERTY_POST_CODE_DESCRIPTION_ENABLED bit of
> >>
> >> - PcdPostCodeProperyMask is clear.
> >>
> >> + PcdPostCodePropertyMask is clear.
> >>
> >>
> >>
> >> **/
> >>
> >> BOOLEAN
> >>
> >> @@ -106,7 +106,7 @@ PostCodeDescriptionEnabled (
> >> /**
> >>
> >> Sends a 32-bit value to a POST card.
> >>
> >>
> >>
> >> - If POST codes are enabled in PcdPostCodeProperyMask, then call
> >> PostCode()
> >>
> >> + If POST codes are enabled in PcdPostCodePropertyMask, then call
> >> PostCode()
> >>
> >> passing in Value. Value is returned.
> >>
> >>
> >>
> >> @param Value The 32-bit value to write to the POST card.
> >>
> >> @@ -120,7 +120,7 @@ PostCodeDescriptionEnabled (
> >> Sends a 32-bit value to a POST and associated ASCII string.
> >>
> >>
> >>
> >> If POST codes and POST code descriptions are enabled in
> >>
> >> - PcdPostCodeProperyMask, then call PostCodeWithDescription() passing
> in
> >>
> >> + PcdPostCodePropertyMask, then call PostCodeWithDescription()
> passing
> >> in
> >>
> >> Value and Description. If only POST codes are enabled, then call
> >> PostCode()
> >>
> >> passing in Value. Value is returned.
> >>
> >>
> >>
> >> diff --git a/MdePkg/Include/Library/ReportStatusCodeLib.h
> >> b/MdePkg/Include/Library/ReportStatusCodeLib.h
> >> index 3763e69928..3268e07aa6 100644
> >> --- a/MdePkg/Include/Library/ReportStatusCodeLib.h
> >> +++ b/MdePkg/Include/Library/ReportStatusCodeLib.h
> >> @@ -298,12 +298,12 @@ ReportStatusCodeEx (
> >> Returns TRUE if status codes of type EFI_PROGRESS_CODE are enabled
> >>
> >>
> >>
> >> This function returns TRUE if the
> >> REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED
> >>
> >> - bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is
> >> returned.
> >>
> >> + bit of PcdReportStatusCodePropertyMask is set. Otherwise FALSE is
> >> returned.
> >>
> >>
> >>
> >> @retval TRUE The
> >> REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
> >>
> >> - PcdReportStatusCodeProperyMask is set.
> >>
> >> + PcdReportStatusCodePropertyMask is set.
> >>
> >> @retval FALSE The
> >> REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
> >>
> >> - PcdReportStatusCodeProperyMask is clear.
> >>
> >> + PcdReportStatusCodePropertyMask is clear.
> >>
> >>
> >>
> >> **/
> >>
> >> BOOLEAN
> >>
> >> @@ -316,12 +316,12 @@ ReportProgressCodeEnabled (
> >> Returns TRUE if status codes of type EFI_ERROR_CODE are enabled
> >>
> >>
> >>
> >> This function returns TRUE if the
> >> REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED
> >>
> >> - bit of PcdReportStatusCodeProperyMask is set. Otherwise, FALSE is
> >> returned.
> >>
> >> + bit of PcdReportStatusCodePropertyMask is set. Otherwise, FALSE is
> >> returned.
> >>
> >>
> >>
> >> @retval TRUE The
> >> REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
> >>
> >> - PcdReportStatusCodeProperyMask is set.
> >>
> >> + PcdReportStatusCodePropertyMask is set.
> >>
> >> @retval FALSE The
> >> REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
> >>
> >> - PcdReportStatusCodeProperyMask is clear.
> >>
> >> + PcdReportStatusCodePropertyMask is clear.
> >>
> >>
> >>
> >> **/
> >>
> >> BOOLEAN
> >>
> >> @@ -334,12 +334,12 @@ ReportErrorCodeEnabled (
> >> Returns TRUE if status codes of type EFI_DEBUG_CODE are enabled
> >>
> >>
> >>
> >> This function returns TRUE if the
> >> REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED
> >>
> >> - bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is
> >> returned.
> >>
> >> + bit of PcdReportStatusCodePropertyMask is set. Otherwise FALSE is
> >> returned.
> >>
> >>
> >>
> >> @retval TRUE The
> >> REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
> >>
> >> - PcdReportStatusCodeProperyMask is set.
> >>
> >> + PcdReportStatusCodePropertyMask is set.
> >>
> >> @retval FALSE The
> >> REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
> >>
> >> - PcdReportStatusCodeProperyMask is clear.
> >>
> >> + PcdReportStatusCodePropertyMask is clear.
> >>
> >>
> >>
> >> **/
> >>
> >> BOOLEAN
> >>
> >> @@ -352,7 +352,7 @@ ReportDebugCodeEnabled (
> >> Reports a status code with minimal parameters if the status code type
> > is
> >> enabled.
> >>
> >>
> >>
> >> If the status code type specified by Type is enabled in
> >>
> >> - PcdReportStatusCodeProperyMask, then call ReportStatusCode()
> passing in
> >> Type
> >>
> >> + PcdReportStatusCodePropertyMask, then call ReportStatusCode()
> passing
> >> in Type
> >>
> >> and Value.
> >>
> >>
> >>
> >> @param Type The status code type.
> >>
> >> @@ -377,7 +377,7 @@ ReportDebugCodeEnabled (
> >> status code type is enabled.
> >>
> >>
> >>
> >> If the status code type specified by Type is enabled in
> >>
> >> - PcdReportStatusCodeProperyMask, then call
> >> ReportStatusCodeWithDevicePath()
> >>
> >> + PcdReportStatusCodePropertyMask, then call
> >> ReportStatusCodeWithDevicePath()
> >>
> >> passing in Type, Value, and DevicePath.
> >>
> >>
> >>
> >> @param Type The status code type.
> >>
> >> @@ -407,7 +407,7 @@ ReportDebugCodeEnabled (
> >> is enabled.
> >>
> >>
> >>
> >> If the status code type specified by Type is enabled in
> >>
> >> - PcdReportStatusCodeProperyMask, then call
> >> ReportStatusCodeWithExtendedData()
> >>
> >> + PcdReportStatusCodePropertyMask, then call
> >> ReportStatusCodeWithExtendedData()
> >>
> >> passing in Type, Value, ExtendedData, and ExtendedDataSize.
> >>
> >>
> >>
> >> @param Type The status code type.
> >>
> >> @@ -438,7 +438,7 @@ ReportDebugCodeEnabled (
> >> Reports a status code specifying all parameters if the status code type
> > is
> >> enabled.
> >>
> >>
> >>
> >> If the status code type specified by Type is enabled in
> >>
> >> - PcdReportStatusCodeProperyMask, then call ReportStatusCodeEx()
> passing
> >> in Type,
> >>
> >> + PcdReportStatusCodePropertyMask, then call ReportStatusCodeEx()
> >> passing in Type,
> >>
> >> Value, Instance, CallerId, ExtendedDataGuid, ExtendedData, and
> >> ExtendedDataSize.
> >>
> >>
> >>
> >> @param Type The status code type.
> >>
> >> diff --git a/MdePkg/Include/Library/S3PciLib.h
> >> b/MdePkg/Include/Library/S3PciLib.h
> >> index 1479859b84..185844d0c7 100644
> >> --- a/MdePkg/Include/Library/S3PciLib.h
> >> +++ b/MdePkg/Include/Library/S3PciLib.h
> >> @@ -985,7 +985,7 @@ S3PciBitFieldAndThenOr32 (
> >> Size into the buffer specified by Buffer. This function only allows the
> > PCI
> >>
> >> configuration registers from a single PCI function to be read. Size is
> >>
> >> returned. When possible 32-bit PCI configuration read cycles are used
> > to
> >> read
> >>
> >> - from StartAdress to StartAddress + Size. Due to alignment restrictions,
> >> 8-bit
> >>
> >> + from StartAddress to StartAddress + Size. Due to alignment
> > restrictions,
> >> 8-bit
> >>
> >> and 16-bit PCI configuration read cycles may be used at the beginning
> > and
> >> the
> >>
> >> end of the range.
> >>
> >>
> >>
> >> @@ -1018,7 +1018,7 @@ S3PciReadBuffer (
> >> Size from the buffer specified by Buffer. This function only allows the
> > PCI
> >>
> >> configuration registers from a single PCI function to be written. Size
> > is
> >>
> >> returned. When possible 32-bit PCI configuration write cycles are used
> > to
> >>
> >> - write from StartAdress to StartAddress + Size. Due to alignment
> >> restrictions,
> >>
> >> + write from StartAddress to StartAddress + Size. Due to alignment
> >> restrictions,
> >>
> >> 8-bit and 16-bit PCI configuration write cycles may be used at the
> >> beginning
> >>
> >> and the end of the range.
> >>
> >>
> >>
> >> diff --git a/MdePkg/Include/Library/S3PciSegmentLib.h
> >> b/MdePkg/Include/Library/S3PciSegmentLib.h
> >> index 5067d4fcbb..21863c2597 100644
> >> --- a/MdePkg/Include/Library/S3PciSegmentLib.h
> >> +++ b/MdePkg/Include/Library/S3PciSegmentLib.h
> >> @@ -970,7 +970,7 @@ S3PciSegmentBitFieldAndThenOr32 (
> >> Size into the buffer specified by Buffer. This function only allows the
> > PCI
> >>
> >> configuration registers from a single PCI function to be read. Size is
> >>
> >> returned. When possible 32-bit PCI configuration read cycles are used
> > to
> >> read
> >>
> >> - from StartAdress to StartAddress + Size. Due to alignment restrictions,
> >> 8-bit
> >>
> >> + from StartAddress to StartAddress + Size. Due to alignment
> > restrictions,
> >> 8-bit
> >>
> >> and 16-bit PCI configuration read cycles may be used at the beginning
> > and
> >> the
> >>
> >> end of the range.
> >>
> >>
> >>
> >> @@ -1003,7 +1003,7 @@ S3PciSegmentReadBuffer (
> >> Size from the buffer specified by Buffer. This function only allows the
> > PCI
> >>
> >> configuration registers from a single PCI function to be written. Size
> > is
> >>
> >> returned. When possible 32-bit PCI configuration write cycles are used
> > to
> >>
> >> - write from StartAdress to StartAddress + Size. Due to alignment
> >> restrictions,
> >>
> >> + write from StartAddress to StartAddress + Size. Due to alignment
> >> restrictions,
> >>
> >> 8-bit and 16-bit PCI configuration write cycles may be used at the
> >> beginning
> >>
> >> and the end of the range.
> >>
> >>
> >>
> >> diff --git a/MdePkg/Include/Library/UefiLib.h
> >> b/MdePkg/Include/Library/UefiLib.h
> >> index be7da7fdf7..450d766513 100644
> >> --- a/MdePkg/Include/Library/UefiLib.h
> >> +++ b/MdePkg/Include/Library/UefiLib.h
> >> @@ -317,7 +317,7 @@ EfiInitializeLock (
> >> Macro that calls DebugAssert() if an EFI_LOCK structure is not in the
> >> locked state.
> >>
> >>
> >>
> >> If MDEPKG_NDEBUG is not defined and the
> >> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
> >>
> >> - bit of PcdDebugProperyMask is set, then this macro evaluates the
> >> EFI_LOCK
> >>
> >> + bit of PcdDebugPropertyMask is set, then this macro evaluates the
> >> EFI_LOCK
> >>
> >> structure specified by Lock. If Lock is not in the locked state, then
> >>
> >> DebugAssert() is called passing in the source filename, source line
> > number,
> >>
> >> and Lock.
> >>
> >> diff --git a/MdePkg/Include/Protocol/BlockIo.h
> >> b/MdePkg/Include/Protocol/BlockIo.h
> >> index ac9adf7a9c..414bf98b52 100644
> >> --- a/MdePkg/Include/Protocol/BlockIo.h
> >> +++ b/MdePkg/Include/Protocol/BlockIo.h
> >> @@ -90,7 +90,7 @@ EFI_STATUS
> >> @retval EFI_WRITE_PROTECTED The device can not be written to.
> >>
> >> @retval EFI_DEVICE_ERROR The device reported an error while
> >> performing the write.
> >>
> >> @retval EFI_NO_MEDIA There is no media in the device.
> >>
> >> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched
> the
> >> current device.
> >>
> >> + @retval EFI_MEDIA_CHANGED The MediaId does not matched
> the
> >> current device.
> >>
> >> @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the
> >> block size of the device.
> >>
> >> @retval EFI_INVALID_PARAMETER The write request contains LBAs
> that
> >> are not valid,
> >>
> >> or the buffer is not on proper
> >> alignment.
> >>
> >> @@ -112,7 +112,7 @@ EFI_STATUS
> >> @param This Indicates a pointer to the calling
> context.
> >>
> >>
> >>
> >> @retval EFI_SUCCESS All outstanding data was written to the
> >> device
> >>
> >> - @retval EFI_DEVICE_ERROR The device reported an error while
> writting
> >> back the data
> >>
> >> + @retval EFI_DEVICE_ERROR The device reported an error while
> writing
> >> back the data
> >>
> >> @retval EFI_NO_MEDIA There is no media in the device.
> >>
> >>
> >>
> >> **/
> >>
> >> diff --git a/MdePkg/Include/Protocol/BlockIo2.h
> >> b/MdePkg/Include/Protocol/BlockIo2.h
> >> index d25f51f733..0502554205 100644
> >> --- a/MdePkg/Include/Protocol/BlockIo2.h
> >> +++ b/MdePkg/Include/Protocol/BlockIo2.h
> >> @@ -44,7 +44,7 @@ typedef struct {
> >>
> >>
> >> @param[in] This Indicates a pointer to the
> calling
> >> context.
> >>
> >> @param[in] ExtendedVerification Indicates that the driver may
> perform
> >> a more
> >>
> >> - exhausive verification
> operation
> >> of the device
> >>
> >> + exhaustive verification
> operation
> >> of the device
> >>
> >> during reset.
> >>
> >>
> >>
> >> @retval EFI_SUCCESS The device was reset.
> >>
> >> @@ -125,7 +125,7 @@ EFI_STATUS
> >> the Event is NULL.
> >>
> >> @retval EFI_WRITE_PROTECTED The device can not be written to.
> >>
> >> @retval EFI_NO_MEDIA There is no media in the device.
> >>
> >> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched
> the
> >> current device.
> >>
> >> + @retval EFI_MEDIA_CHANGED The MediaId does not matched
> the
> >> current device.
> >>
> >> @retval EFI_DEVICE_ERROR The device reported an error while
> >> performing the write.
> >>
> >> @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the
> >> block size of the device.
> >>
> >> @retval EFI_INVALID_PARAMETER The write request contains LBAs
> that
> >> are not valid,
> >>
> >> @@ -158,7 +158,7 @@ EFI_STATUS
> >> @retval EFI_SUCCESS The flush request was queued if
> Event
> >> is not NULL.
> >>
> >> All outstanding data was written
> >> correctly to the
> >>
> >> device if the Event is NULL.
> >>
> >> - @retval EFI_DEVICE_ERROR The device reported an error while
> >> writting back
> >>
> >> + @retval EFI_DEVICE_ERROR The device reported an error while
> >> writing back
> >>
> >> the data.
> >>
> >> @retval EFI_WRITE_PROTECTED The device cannot be written to.
> >>
> >> @retval EFI_NO_MEDIA There is no media in the device.
> >>
> >> diff --git a/MdePkg/Include/Protocol/BlockIoCrypto.h
> >> b/MdePkg/Include/Protocol/BlockIoCrypto.h
> >> index bcc0ed40be..f0af6a8bb0 100644
> >> --- a/MdePkg/Include/Protocol/BlockIoCrypto.h
> >> +++ b/MdePkg/Include/Protocol/BlockIoCrypto.h
> >> @@ -168,7 +168,7 @@ typedef struct {
> >> up to the platform firmware or driver to implement.
> >>
> >>
> >>
> >> @param[in] This Pointer to the
> >> EFI_BLOCK_IO_CRYPTO_PROTOCOL instance.
> >>
> >> - @param[in] ExtendedVerification Indicates that the driver may
> perform
> >> a more exhausive
> >>
> >> + @param[in] ExtendedVerification Indicates that the driver may
> perform
> >> a more exhaustive
> >>
> >> verification operation of the
> >> device during reset.
> >>
> >>
> >>
> >> @retval EFI_SUCCESS The block device was reset.
> >>
> >> diff --git a/MdePkg/Include/Protocol/DiskIo.h
> >> b/MdePkg/Include/Protocol/DiskIo.h
> >> index eaa5cbcea2..2c86530a5c 100644
> >> --- a/MdePkg/Include/Protocol/DiskIo.h
> >> +++ b/MdePkg/Include/Protocol/DiskIo.h
> >> @@ -42,7 +42,7 @@ typedef EFI_DISK_IO_PROTOCOL EFI_DISK_IO;
> >> @retval EFI_SUCCESS The data was read correctly from
> the
> >> device.
> >>
> >> @retval EFI_DEVICE_ERROR The device reported an error while
> >> performing the read.
> >>
> >> @retval EFI_NO_MEDIA There is no media in the device.
> >>
> >> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched
> the
> >> current device.
> >>
> >> + @retval EFI_MEDIA_CHANGED The MediaId does not matched
> the
> >> current device.
> >>
> >> @retval EFI_INVALID_PARAMETER The read request contains device
> >> addresses that are not
> >>
> >> valid for the device.
> >>
> >>
> >>
> >> @@ -70,7 +70,7 @@ EFI_STATUS
> >> @retval EFI_WRITE_PROTECTED The device can not be written to.
> >>
> >> @retval EFI_DEVICE_ERROR The device reported an error while
> >> performing the write.
> >>
> >> @retval EFI_NO_MEDIA There is no media in the device.
> >>
> >> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched
> the
> >> current device.
> >>
> >> + @retval EFI_MEDIA_CHANGED The MediaId does not matched
> the
> >> current device.
> >>
> >> @retval EFI_INVALID_PARAMETER The write request contains device
> >> addresses that are not
> >>
> >> valid for the device.
> >>
> >>
> >>
> >> diff --git a/MdePkg/Include/Protocol/DiskIo2.h
> >> b/MdePkg/Include/Protocol/DiskIo2.h
> >> index c989bb5f45..58c972e48e 100644
> >> --- a/MdePkg/Include/Protocol/DiskIo2.h
> >> +++ b/MdePkg/Include/Protocol/DiskIo2.h
> >> @@ -70,7 +70,7 @@ EFI_STATUS
> >>
> >> Event will be signaled upon completion.
> >>
> >> @retval EFI_DEVICE_ERROR The device reported an error while
> >> performing the write.
> >>
> >> @retval EFI_NO_MEDIA There is no medium in the device.
> >>
> >> - @retval EFI_MEDIA_CHNAGED The MediaId is not for the current
> >> medium.
> >>
> >> + @retval EFI_MEDIA_CHANGED The MediaId is not for the
> current
> >> medium.
> >>
> >> @retval EFI_INVALID_PARAMETER The read request contains device
> >> addresses that are not valid for the device.
> >>
> >> @retval EFI_OUT_OF_RESOURCES The request could not be
> completed
> >> due to a lack of resources.
> >>
> >>
> >>
> >> @@ -103,7 +103,7 @@ EFI_STATUS
> >> @retval EFI_WRITE_PROTECTED The device cannot be written to.
> >>
> >> @retval EFI_DEVICE_ERROR The device reported an error while
> >> performing the write operation.
> >>
> >> @retval EFI_NO_MEDIA There is no medium in the device.
> >>
> >> - @retval EFI_MEDIA_CHNAGED The MediaId is not for the current
> >> medium.
> >>
> >> + @retval EFI_MEDIA_CHANGED The MediaId is not for the
> current
> >> medium.
> >>
> >> @retval EFI_INVALID_PARAMETER The write request contains device
> >> addresses that are not valid for the device.
> >>
> >> @retval EFI_OUT_OF_RESOURCES The request could not be
> completed
> >> due to a lack of resources.
> >>
> >>
> >>
> >> @@ -133,7 +133,7 @@ EFI_STATUS
> >> @retval EFI_WRITE_PROTECTED The device cannot be written to.
> >>
> >> @retval EFI_DEVICE_ERROR The device reported an error while
> >> performing the write operation.
> >>
> >> @retval EFI_NO_MEDIA There is no medium in the device.
> >>
> >> - @retval EFI_MEDIA_CHNAGED The MediaId is not for the current
> >> medium.
> >>
> >> + @retval EFI_MEDIA_CHANGED The MediaId is not for the
> current
> >> medium.
> >>
> >> @retval EFI_OUT_OF_RESOURCES The request could not be
> completed
> >> due to a lack of resources.
> >>
> >> **/
> >>
> >> typedef
> >>
> >> diff --git a/MdePkg/Include/Protocol/Ip4.h
> b/MdePkg/Include/Protocol/Ip4.h
> >> index 4c0ed6fd3c..57a25122ba 100644
> >> --- a/MdePkg/Include/Protocol/Ip4.h
> >> +++ b/MdePkg/Include/Protocol/Ip4.h
> >> @@ -37,7 +37,7 @@ typedef struct _EFI_IP4_PROTOCOL
> >> EFI_IP4_PROTOCOL;
> >>
> >>
> >> ///
> >>
> >> /// EFI_IP4_ADDRESS_PAIR is deprecated in the UEFI 2.4B and should not
> be
> >> used any more.
> >>
> >> -/// The definition in here is only present to provide backwards
> > compatability.
> >>
> >> +/// The definition in here is only present to provide backwards
> > compatibility.
> >>
> >> ///
> >>
> >> typedef struct {
> >>
> >> EFI_HANDLE InstanceHandle;
> >>
> >> @@ -47,7 +47,7 @@ typedef struct {
> >>
> >>
> >> ///
> >>
> >> /// EFI_IP4_VARIABLE_DATA is deprecated in the UEFI 2.4B and should not
> >> be used any more.
> >>
> >> -/// The definition in here is only present to provide backwards
> > compatability.
> >>
> >> +/// The definition in here is only present to provide backwards
> > compatibility.
> >>
> >> ///
> >>
> >> typedef struct {
> >>
> >> EFI_HANDLE DriverHandle;
> >>
> >> diff --git a/MdePkg/Include/Protocol/Ip6.h
> b/MdePkg/Include/Protocol/Ip6.h
> >> index 4aff36f0a1..269ae0d6b0 100644
> >> --- a/MdePkg/Include/Protocol/Ip6.h
> >> +++ b/MdePkg/Include/Protocol/Ip6.h
> >> @@ -37,7 +37,7 @@ typedef struct _EFI_IP6_PROTOCOL
> >> EFI_IP6_PROTOCOL;
> >>
> >>
> >> ///
> >>
> >> /// EFI_IP6_ADDRESS_PAIR is deprecated in the UEFI 2.4B and should not
> be
> >> used any more.
> >>
> >> -/// The definition in here is only present to provide backwards
> > compatability.
> >>
> >> +/// The definition in here is only present to provide backwards
> > compatibility.
> >>
> >> ///
> >>
> >> typedef struct {
> >>
> >> ///
> >>
> >> @@ -56,7 +56,7 @@ typedef struct {
> >>
> >>
> >> ///
> >>
> >> /// EFI_IP6_VARIABLE_DATA is deprecated in the UEFI 2.4B and should not
> >> be used any more.
> >>
> >> -/// The definition in here is only present to provide backwards
> > compatability.
> >>
> >> +/// The definition in here is only present to provide backwards
> > compatibility.
> >>
> >> ///
> >>
> >> typedef struct {
> >>
> >> ///
> >>
> >> diff --git a/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h
> >> b/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h
> >> index 78acb4ddae..9649b819ba 100644
> >> --- a/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h
> >> +++ b/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h
> >> @@ -39,7 +39,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> >> #define EFI_NETWORK_INTERFACE_IDENTIFIER_INTERFACE_REVISION
> >> EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL_REVISION
> >>
> >>
> >>
> >> ///
> >>
> >> -/// Forward reference for pure ANSI compatability.
> >>
> >> +/// Forward reference for pure ANSI compatibility.
> >>
> >> ///
> >>
> >> typedef struct _EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL
> >> EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL;
> >>
> >>
> >>
> >> @@ -82,7 +82,7 @@ typedef enum {
> >> } EFI_NETWORK_INTERFACE_TYPE;
> >>
> >>
> >>
> >> ///
> >>
> >> -/// Forward reference for pure ANSI compatability.
> >>
> >> +/// Forward reference for pure ANSI compatibility.
> >>
> >> ///
> >>
> >> typedef struct undiconfig_table UNDI_CONFIG_TABLE;
> >>
> >>
> >>
> >> diff --git a/MdePkg/Include/Protocol/Pkcs7Verify.h
> >> b/MdePkg/Include/Protocol/Pkcs7Verify.h
> >> index 068eda8b45..93b6c2f9b7 100644
> >> --- a/MdePkg/Include/Protocol/Pkcs7Verify.h
> >> +++ b/MdePkg/Include/Protocol/Pkcs7Verify.h
> >> @@ -28,7 +28,7 @@ typedef struct _EFI_PKCS7_VERIFY_PROTOCOL
> >> EFI_PKCS7_VERIFY_PROTOCOL;
> >>
> >>
> >> /**
> >>
> >> Processes a buffer containing binary DER-encoded PKCS7 signature.
> >>
> >> - The signed data content may be embedded within the buffer or
> separated.
> >> Funtion
> >>
> >> + The signed data content may be embedded within the buffer or
> separated.
> >> Function
> >>
> >> verifies the signature of the content is valid and signing certificate
> > was not
> >>
> >> revoked and is contained within a list of trusted signers.
> >>
> >>
> >>
> >> diff --git a/MdePkg/Include/Protocol/RamDisk.h
> >> b/MdePkg/Include/Protocol/RamDisk.h
> >> index 2ab5a5e5e1..8808efdf66 100644
> >> --- a/MdePkg/Include/Protocol/RamDisk.h
> >> +++ b/MdePkg/Include/Protocol/RamDisk.h
> >> @@ -19,7 +19,7 @@
> >> { 0xab38a0df, 0x6873, 0x44a9, { 0x87, 0xe6, 0xd4, 0xeb, 0x56, 0x14,
> > 0x84,
> >> 0x49 }};
> >>
> >>
> >>
> >> //
> >>
> >> -// Forward reference for pure ANSI compatability
> >>
> >> +// Forward reference for pure ANSI compatibility
> >>
> >> //
> >>
> >> typedef struct _EFI_RAM_DISK_PROTOCOL EFI_RAM_DISK_PROTOCOL;
> >>
> >>
> >>
> >> diff --git a/MdePkg/Include/Protocol/ScsiIo.h
> >> b/MdePkg/Include/Protocol/ScsiIo.h
> >> index 7ebfd9a652..7485e52b3f 100644
> >> --- a/MdePkg/Include/Protocol/ScsiIo.h
> >> +++ b/MdePkg/Include/Protocol/ScsiIo.h
> >> @@ -18,7 +18,7 @@
> >> }
> >>
> >>
> >>
> >> ///
> >>
> >> -/// Forward reference for pure ANSI compatability
> >>
> >> +/// Forward reference for pure ANSI compatibility
> >>
> >> ///
> >>
> >> typedef struct _EFI_SCSI_IO_PROTOCOL EFI_SCSI_IO_PROTOCOL;
> >>
> >>
> >>
> >> diff --git a/MdePkg/Include/Protocol/ScsiPassThru.h
> >> b/MdePkg/Include/Protocol/ScsiPassThru.h
> >> index c87fb97aee..a4c6a6be3d 100644
> >> --- a/MdePkg/Include/Protocol/ScsiPassThru.h
> >> +++ b/MdePkg/Include/Protocol/ScsiPassThru.h
> >> @@ -22,7 +22,7 @@
> >> }
> >>
> >>
> >>
> >> ///
> >>
> >> -/// Forward reference for pure ANSI compatability
> >>
> >> +/// Forward reference for pure ANSI compatibility
> >>
> >> ///
> >>
> >> typedef struct _EFI_SCSI_PASS_THRU_PROTOCOL
> >> EFI_SCSI_PASS_THRU_PROTOCOL;
> >>
> >>
> >>
> >> diff --git a/MdePkg/Include/Protocol/ServiceBinding.h
> >> b/MdePkg/Include/Protocol/ServiceBinding.h
> >> index b39af73a95..3fb9ed6e98 100644
> >> --- a/MdePkg/Include/Protocol/ServiceBinding.h
> >> +++ b/MdePkg/Include/Protocol/ServiceBinding.h
> >> @@ -14,7 +14,7 @@
> >> #define __EFI_SERVICE_BINDING_H__
> >>
> >>
> >>
> >> ///
> >>
> >> -/// Forward reference for pure ANSI compatability
> >>
> >> +/// Forward reference for pure ANSI compatibility
> >>
> >> ///
> >>
> >> typedef struct _EFI_SERVICE_BINDING_PROTOCOL
> >> EFI_SERVICE_BINDING_PROTOCOL;
> >>
> >>
> >>
> >> diff --git a/MdePkg/Include/Protocol/Shell.h
> >> b/MdePkg/Include/Protocol/Shell.h
> >> index 5efee49e19..d65c87a735 100644
> >> --- a/MdePkg/Include/Protocol/Shell.h
> >> +++ b/MdePkg/Include/Protocol/Shell.h
> >> @@ -180,7 +180,7 @@ BOOLEAN
> >>
> >>
> >> @param[in] FileHandle The file handle to be closed.
> >>
> >>
> >>
> >> - @retval EFI_SUCCESS The file closed sucessfully.
> >>
> >> + @retval EFI_SUCCESS The file closed successfully.
> >>
> >> **/
> >>
> >> typedef
> >>
> >> EFI_STATUS
> >>
> >> diff --git a/MdePkg/Include/Protocol/ShellDynamicCommand.h
> >> b/MdePkg/Include/Protocol/ShellDynamicCommand.h
> >> index f1bb59d700..c7756f9a81 100644
> >> --- a/MdePkg/Include/Protocol/ShellDynamicCommand.h
> >> +++ b/MdePkg/Include/Protocol/ShellDynamicCommand.h
> >> @@ -34,7 +34,7 @@ typedef struct
> >> _EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL
> >> EFI_SHELL_DYNAMIC_COMMAND_PRO
> >> @param[in] Shell The instance of the shell
> protocol
> >> used in the context
> >>
> >> of processing this command.
> >>
> >>
> >>
> >> - @return EFI_SUCCESS the operation was sucessful
> >>
> >> + @return EFI_SUCCESS the operation was successful
> >>
> >> @return other the operation failed.
> >>
> >> **/
> >>
> >> typedef
> >>
> >> diff --git a/MdePkg/Include/Protocol/Tcp4.h
> >> b/MdePkg/Include/Protocol/Tcp4.h
> >> index e81c2e71f6..cf88739687 100644
> >> --- a/MdePkg/Include/Protocol/Tcp4.h
> >> +++ b/MdePkg/Include/Protocol/Tcp4.h
> >> @@ -31,7 +31,7 @@ typedef struct _EFI_TCP4_PROTOCOL
> >> EFI_TCP4_PROTOCOL;
> >>
> >>
> >> ///
> >>
> >> /// EFI_TCP4_SERVICE_POINT is deprecated in the UEFI 2.4B and should
> not
> >> be used any more.
> >>
> >> -/// The definition in here is only present to provide backwards
> > compatability.
> >>
> >> +/// The definition in here is only present to provide backwards
> > compatibility.
> >>
> >> ///
> >>
> >> typedef struct {
> >>
> >> EFI_HANDLE InstanceHandle;
> >>
> >> @@ -43,7 +43,7 @@ typedef struct {
> >>
> >>
> >> ///
> >>
> >> /// EFI_TCP4_VARIABLE_DATA is deprecated in the UEFI 2.4B and should
> not
> >> be used any more.
> >>
> >> -/// The definition in here is only present to provide backwards
> > compatability.
> >>
> >> +/// The definition in here is only present to provide backwards
> > compatibility.
> >>
> >> ///
> >>
> >> typedef struct {
> >>
> >> EFI_HANDLE DriverHandle;
> >>
> >> diff --git a/MdePkg/Include/Protocol/Tcp6.h
> >> b/MdePkg/Include/Protocol/Tcp6.h
> >> index a8787dd3af..1391978a35 100644
> >> --- a/MdePkg/Include/Protocol/Tcp6.h
> >> +++ b/MdePkg/Include/Protocol/Tcp6.h
> >> @@ -32,7 +32,7 @@ typedef struct _EFI_TCP6_PROTOCOL
> >> EFI_TCP6_PROTOCOL;
> >>
> >>
> >> ///
> >>
> >> /// EFI_TCP6_SERVICE_POINT is deprecated in the UEFI 2.4B and should
> not
> >> be used any more.
> >>
> >> -/// The definition in here is only present to provide backwards
> > compatability.
> >>
> >> +/// The definition in here is only present to provide backwards
> > compatibility.
> >>
> >> ///
> >>
> >> typedef struct {
> >>
> >> ///
> >>
> >> @@ -64,7 +64,7 @@ typedef struct {
> >>
> >>
> >> ///
> >>
> >> /// EFI_TCP6_VARIABLE_DATA is deprecated in the UEFI 2.4B and should
> not
> >> be used any more.
> >>
> >> -/// The definition in here is only present to provide backwards
> > compatability.
> >>
> >> +/// The definition in here is only present to provide backwards
> > compatibility.
> >>
> >> ///
> >>
> >> typedef struct {
> >>
> >> EFI_HANDLE DriverHandle; ///< The handle of the
> >> driver that creates this entry.
> >>
> >> diff --git a/MdePkg/Include/Protocol/Udp4.h
> >> b/MdePkg/Include/Protocol/Udp4.h
> >> index a4ac6fd4e7..e7e41cadef 100644
> >> --- a/MdePkg/Include/Protocol/Udp4.h
> >> +++ b/MdePkg/Include/Protocol/Udp4.h
> >> @@ -33,7 +33,7 @@ typedef struct _EFI_UDP4_PROTOCOL
> >> EFI_UDP4_PROTOCOL;
> >>
> >>
> >> ///
> >>
> >> /// EFI_UDP4_SERVICE_POINT is deprecated in the UEFI 2.4B and should
> >> not be used any more.
> >>
> >> -/// The definition in here is only present to provide backwards
> > compatability.
> >>
> >> +/// The definition in here is only present to provide backwards
> > compatibility.
> >>
> >> ///
> >>
> >> typedef struct {
> >>
> >> EFI_HANDLE InstanceHandle;
> >>
> >> @@ -45,7 +45,7 @@ typedef struct {
> >>
> >>
> >> ///
> >>
> >> /// EFI_UDP4_VARIABLE_DATA is deprecated in the UEFI 2.4B and should
> >> not be used any more.
> >>
> >> -/// The definition in here is only present to provide backwards
> > compatability.
> >>
> >> +/// The definition in here is only present to provide backwards
> > compatibility.
> >>
> >> ///
> >>
> >> typedef struct {
> >>
> >> EFI_HANDLE DriverHandle;
> >>
> >> diff --git a/MdePkg/Include/Protocol/Udp6.h
> >> b/MdePkg/Include/Protocol/Udp6.h
> >> index 61fa623917..a8179c8f93 100644
> >> --- a/MdePkg/Include/Protocol/Udp6.h
> >> +++ b/MdePkg/Include/Protocol/Udp6.h
> >> @@ -28,7 +28,7 @@
> >>
> >>
> >> ///
> >>
> >> /// EFI_UDP6_SERVICE_POINT is deprecated in the UEFI 2.4B and should
> >> not be used any more.
> >>
> >> -/// The definition in here is only present to provide backwards
> > compatability.
> >>
> >> +/// The definition in here is only present to provide backwards
> > compatibility.
> >>
> >> ///
> >>
> >> typedef struct {
> >>
> >> ///
> >>
> >> @@ -59,7 +59,7 @@ typedef struct {
> >>
> >>
> >> ///
> >>
> >> /// EFI_UDP6_VARIABLE_DATA is deprecated in the UEFI 2.4B and should
> >> not be used any more.
> >>
> >> -/// The definition in here is only present to provide backwards
> > compatability.
> >>
> >> +/// The definition in here is only present to provide backwards
> > compatibility.
> >>
> >> ///
> >>
> >> typedef struct {
> >>
> >> ///
> >>
> >> diff --git a/MdePkg/Include/Protocol/UfsDeviceConfig.h
> >> b/MdePkg/Include/Protocol/UfsDeviceConfig.h
> >> index 34676c7831..b3e58c4aad 100644
> >> --- a/MdePkg/Include/Protocol/UfsDeviceConfig.h
> >> +++ b/MdePkg/Include/Protocol/UfsDeviceConfig.h
> >> @@ -19,7 +19,7 @@
> >> { 0xb81bfab0, 0xeb3, 0x4cf9, { 0x84, 0x65, 0x7f, 0xa9, 0x86, 0x36,
> > 0x16,
> >> 0x64 }};
> >>
> >>
> >>
> >> //
> >>
> >> -// Forward reference for pure ANSI compatability
> >>
> >> +// Forward reference for pure ANSI compatibility
> >>
> >> //
> >>
> >> typedef struct _EFI_UFS_DEVICE_CONFIG_PROTOCOL
> >> EFI_UFS_DEVICE_CONFIG_PROTOCOL;
> >>
> >>
> >>
> >> diff --git a/MdePkg/Include/Protocol/UgaDraw.h
> >> b/MdePkg/Include/Protocol/UgaDraw.h
> >> index 8d33bf873c..f27fde5e32 100644
> >> --- a/MdePkg/Include/Protocol/UgaDraw.h
> >> +++ b/MdePkg/Include/Protocol/UgaDraw.h
> >> @@ -126,7 +126,7 @@ typedef enum {
> >>
> >>
> >> @retval EFI_SUCCESS - The Blt operation completed.
> >>
> >> @retval EFI_INVALID_PARAMETER - BltOperation is not valid.
> >>
> >> - @retval EFI_DEVICE_ERROR - A hardware error occurred
> >> writting to the video buffer.
> >>
> >> + @retval EFI_DEVICE_ERROR - A hardware error occurred
> >> writing to the video buffer.
> >>
> >>
> >>
> >> **/
> >>
> >> typedef
> >>
> >> diff --git a/MdePkg/Include/Protocol/Usb2HostController.h
> >> b/MdePkg/Include/Protocol/Usb2HostController.h
> >> index 06e20beba8..50bbb5574a 100644
> >> --- a/MdePkg/Include/Protocol/Usb2HostController.h
> >> +++ b/MdePkg/Include/Protocol/Usb2HostController.h
> >> @@ -20,7 +20,7 @@
> >> }
> >>
> >>
> >>
> >> ///
> >>
> >> -/// Forward reference for pure ANSI compatability
> >>
> >> +/// Forward reference for pure ANSI compatibility
> >>
> >> ///
> >>
> >> typedef struct _EFI_USB2_HC_PROTOCOL EFI_USB2_HC_PROTOCOL;
> >>
> >>
> >>
> >> diff --git a/MdePkg/Include/Protocol/UsbHostController.h
> >> b/MdePkg/Include/Protocol/UsbHostController.h
> >> index 8b626ec52a..7b215f6d03 100644
> >> --- a/MdePkg/Include/Protocol/UsbHostController.h
> >> +++ b/MdePkg/Include/Protocol/UsbHostController.h
> >> @@ -21,7 +21,7 @@
> >> }
> >>
> >>
> >>
> >> ///
> >>
> >> -/// Forward reference for pure ANSI compatability
> >>
> >> +/// Forward reference for pure ANSI compatibility
> >>
> >> ///
> >>
> >> typedef struct _EFI_USB_HC_PROTOCOL EFI_USB_HC_PROTOCOL;
> >>
> >>
> >>
> >> --
> >> 2.39.2 (Apple Git-144)
> >>
> >>
> >
> >
> >
> >
next prev parent reply other threads:[~2023-05-16 1:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-12 10:25 [PATCH] MdePkg Include: Fix typos Giri Mudusuru
2023-05-15 1:40 ` 回复: " gaoliming
2023-05-15 2:48 ` Giri Mudusuru
2023-05-16 1:19 ` gaoliming [this message]
2023-05-17 18:20 ` Giri Mudusuru
2023-05-18 3:06 ` [edk2-devel] " Michael Kubacki
2023-05-21 2:41 ` Giri Mudusuru
2023-05-22 1:14 ` 回复: " gaoliming
2023-05-22 14:45 ` Michael Kubacki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001001d98794$79215f00$6b641d00$@byosoft.com.cn' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox