From: "gaoliming" <gaoliming@byosoft.com.cn>
To: <devel@edk2.groups.io>, <sami.mujawar@arm.com>, <jbrasen@nvidia.com>
Cc: <michael.d.kinney@intel.com>, <zhiguang.liu@intel.com>,
<zhichao.gao@intel.com>, <ray.ni@intel.com>, <nd@arm.com>
Subject: 回复: [edk2-devel] [PATCH 1/2] MdePkg/IndustryStandard: add definitions for ACPI APMT
Date: Wed, 2 Nov 2022 09:05:43 +0800 [thread overview]
Message-ID: <002101d8ee57$3bc2b090$b34811b0$@byosoft.com.cn> (raw)
In-Reply-To: <266ab2d4-4464-de86-6b9c-afc53ab407b5@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
> -----邮件原件-----
> 发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表 Sami
> Mujawar
> 发送时间: 2022年11月1日 19:42
> 收件人: devel@edk2.groups.io; jbrasen@nvidia.com
> 抄送: michael.d.kinney@intel.com; gaoliming@byosoft.com.cn;
> zhiguang.liu@intel.com; zhichao.gao@intel.com; ray.ni@intel.com;
> nd@arm.com
> 主题: Re: [edk2-devel] [PATCH 1/2] MdePkg/IndustryStandard: add
> definitions for ACPI APMT
>
> Hi Jeff,
>
> Thank you for this patch.
>
> These changes look good to me.
>
> Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
>
> Regards,
>
> Sami Mujawar
>
> On 27/10/2022 03:40 pm, Jeff Brasen via groups.io wrote:
> > This adds #defines and struct typedefs for the various node types in
> >
> > the ACPI Arm Performance Monitoring Unit (APMT) table.
> >
> >
> >
> > Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
> >
> > ---
> >
> > MdePkg/Include/IndustryStandard/Acpi64.h | 5 ++
> >
> > .../ArmPerformanceMonitoringUnitTable.h | 69
> +++++++++++++++++++
> >
> > 2 files changed, 74 insertions(+)
> >
> > create mode 100644
> MdePkg/Include/IndustryStandard/ArmPerformanceMonitoringUnitTable.h
> >
> >
> >
> > diff --git a/MdePkg/Include/IndustryStandard/Acpi64.h
> b/MdePkg/Include/IndustryStandard/Acpi64.h
> >
> > index fe5ebfac2b..575ca0430c 100644
> >
> > --- a/MdePkg/Include/IndustryStandard/Acpi64.h
> >
> > +++ b/MdePkg/Include/IndustryStandard/Acpi64.h
> >
> > @@ -2847,6 +2847,11 @@ typedef struct {
> >
> > ///
> >
> > #define
> EFI_ACPI_6_4_MULTIPLE_APIC_DESCRIPTION_TABLE_SIGNATURE
> SIGNATURE_32('A', 'P', 'I', 'C')
> >
> >
> >
> > +///
> >
> > +/// "APMT" Arm Performance Monitoring Unit Table
> >
> > +///
> >
> > +#define
> EFI_ACPI_6_4_ARM_PERFORMANCE_MONITORING_UNIT_TABLE_SIGNATU
> RE SIGNATURE_32('A', 'P', 'M', 'T')
> >
> > +
> >
> > ///
> >
> > /// "BERT" Boot Error Record Table
> >
> > ///
> >
> > diff --git
> a/MdePkg/Include/IndustryStandard/ArmPerformanceMonitoringUnitTable.h
> b/MdePkg/Include/IndustryStandard/ArmPerformanceMonitoringUnitTable.h
> >
> > new file mode 100644
> >
> > index 0000000000..fe7084cffd
> >
> > --- /dev/null
> >
> > +++
> b/MdePkg/Include/IndustryStandard/ArmPerformanceMonitoringUnitTable.h
> >
> > @@ -0,0 +1,69 @@
> >
> > +/** @file
> >
> > + ACPI Arm Performance Monitoring Unit (APMT) table
> >
> > + as specified in ARM spec DEN0117
> >
> > +
> >
> > + Copyright (c) 2022, NVIDIA CORPORATION. All rights reserved.
> >
> > + Copyright (c) 2022, ARM Limited. All rights reserved.
> >
> > + SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > +**/
> >
> > +
> >
> > +#ifndef ARM_PERFORMANCE_MONITORING_UNIT_TABLE_H_
> >
> > +#define ARM_PERFORMANCE_MONITORING_UNIT_TABLE_H_
> >
> > +
> >
> > +#include <IndustryStandard/Acpi.h>
> >
> > +
> >
> > +#pragma pack(1)
> >
> > +
> >
> > +///
> >
> > +/// Arm Performance Monitoring Unit (APMT) tabl
> >
> > +///
> >
> > +typedef struct {
> >
> > + EFI_ACPI_DESCRIPTION_HEADER Header;
> >
> > +} EFI_ACPI_ARM_PERFORMANCE_MONITORING_UNIT_TABLE_HEADER;
> >
> > +
> >
> > +///
> >
> > +/// APMT Revision (as defined in DEN0117.)
> >
> > +///
> >
> > +#define
> EFI_ACPI_ARM_PERFORMANCE_MONITORING_UNIT_TABLE_REVISION
> 0x00
> >
> > +
> >
> > +///
> >
> > +/// Arm PMU Node Structure
> >
> > +///
> >
> > +
> >
> > +// Node Flags
> >
> > +#define EFI_ACPI_APMT_DUAL_PAGE_EXTENSION_SUPPORTED
> BIT0
> >
> > +#define EFI_ACPI_APMT_PROCESSOR_AFFINITY_TYPE_CONTAINER
> BIT1
> >
> > +#define EFI_ACPI_APMT_PROCESSOR_AFFINITY_TYPE_PROCESSOR
> 0 // BIT 1
> >
> > +#define EFI_ACPI_APMT_64BIT_SINGLE_COPY_ATOMICITY_SUPPORTED
> BIT2
> >
> > +
> >
> > +// Interrupt Flags
> >
> > +#define EFI_ACPI_APMT_INTERRUPT_MODE_EDGE_TRIGGERED BIT0
> >
> > +#define EFI_ACPI_APMT_INTERRUPT_MODE_LEVEL_TRIGGERED 0 //
> BIT 0
> >
> > +#define EFI_ACPI_APMT_INTERRUPT_TYPE_WIRED 0 // BIT
> 1
> >
> > +
> >
> > +// Node Type
> >
> > +#define EFI_ACPI_APMT_NODE_TYPE_MEMORY_CONTROLLER 0x00
> >
> > +#define EFI_ACPI_APMT_NODE_TYPE_SMMU 0x01
> >
> > +#define EFI_ACPI_APMT_NODE_TYPE_PCIE_ROOT_COMPLEX 0x02
> >
> > +#define EFI_ACPI_APMT_NODE_TYPE_ACPI_DEVICE 0x03
> >
> > +#define EFI_ACPI_APMT_NODE_TYPE_CPU_CACHE 0x04
> >
> > +
> >
> > +typedef struct {
> >
> > + UINT16 Length;
> >
> > + UINT8 NodeFlags;
> >
> > + UINT8 NodeType;
> >
> > + UINT32 Identifier;
> >
> > + UINT64 NodeInstancePrimary;
> >
> > + UINT32 NodeInstanceSecondary;
> >
> > + UINT64 BaseAddress0;
> >
> > + UINT64 BaseAddress1;
> >
> > + UINT32 OverflowInterrupt;
> >
> > + UINT32 Reserved1;
> >
> > + UINT32 OverflowInterruptFlags;
> >
> > + UINT32 ProcessorAffinity;
> >
> > + UINT32 ImplementationId;
> >
> > +} EFI_ACPI_ARM_PERFORMANCE_MONITORING_UNIT_NODE;
> >
> > +
> >
> > +#pragma pack()
> >
> > +
> >
> > +#endif
> >
>
>
>
>
next prev parent reply other threads:[~2022-11-02 1:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-27 14:40 [PATCH 1/2] MdePkg/IndustryStandard: add definitions for ACPI APMT Jeff Brasen
2022-10-27 14:40 ` [PATCH 2/2] ShellPkg/AcpiView: APMT Parser Jeff Brasen
2022-11-01 11:41 ` [edk2-devel] " Sami Mujawar
2022-11-01 11:41 ` [edk2-devel] [PATCH 1/2] MdePkg/IndustryStandard: add definitions for ACPI APMT Sami Mujawar
2022-11-02 1:05 ` gaoliming [this message]
2022-11-03 1:42 ` Gao, Zhichao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='002101d8ee57$3bc2b090$b34811b0$@byosoft.com.cn' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox