回复: [PATCH 0/2] dp command without ACPI

["gaoliming" <gaoliming@byosoft.com.cn>]

Jeff:
  Performance has been stored as FPDT table. It can be directly mapped to
the configuration table. So, this solution is good to me. Reviewed-by:
Liming Gao <gaoliming@byosoft.com.cn>

Thanks
Liming
> -----邮件原件-----
> 发件人: Jeff Brasen <jbrasen@nvidia.com>
> 发送时间: 2023年6月30日 5:09
> 收件人: devel@edk2.groups.io
> 抄送: jian.j.wang@intel.com; gaoliming@byosoft.com.cn;
> dandan.bi@intel.com; zhichao.gao@intel.com; Jeff Brasen
> <jbrasen@nvidia.com>
> 主题: [PATCH 0/2] dp command without ACPI
> 
> Systems that do not boot with ACPI (system that use device tree for
example)
> can not use the shell dp command. This patch adds this to the
configuration
> table so that dp command can get this without the FPDT table.
> 
> I am open to other ways for this to be passed if desired (Installed
protocol,
> handler of the status code, etc) but wanted to post this to at least get
> thoughts
> on this.
> 
> -Jeff
> 
> Jeff Brasen (2):
>   MdeModulePkg/DxeCorePerformanceLib: Install BPDT in config table
>   ShellPkg/Dp: Allow dp command to work without ACPI
> 
>  .../DxeCorePerformanceLib/DxeCorePerformanceLib.c     |  2 ++
>  ShellPkg/DynamicCommand/DpDynamicCommand/Dp.c         | 11
> ++++++++---
>  ShellPkg/DynamicCommand/DpDynamicCommand/DpApp.inf    |  1 +
>  .../DpDynamicCommand/DpDynamicCommand.inf             |  1 +
>  4 files changed, 12 insertions(+), 3 deletions(-)
> 
> --
> 2.25.1