* [PATCH v5] MdeModulePkg/Universal/StatusCodeHandler: Fix a bug about log lost
@ 2020-12-17 13:58 Tan, Ming
2020-12-18 1:09 ` 回复: [edk2-devel] " gaoliming
0 siblings, 1 reply; 4+ messages in thread
From: Tan, Ming @ 2020-12-17 13:58 UTC (permalink / raw)
To: devel; +Cc: Dandan Bi, Liming Gao
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3126
1. If use PeiDxeDebugLibReportStatusCode as DebugLib, then some logs
after ExitBootService() will be lost.
2. The root cause:
2.1 The original code will register an unregister function
of gEfiEventExitBootServicesGuid, this unregister function will call
EFI_RSC_HANDLER_PROTOCOL->Unregister and does not support log through
serial port.
2.2 And some other drivers also register call back funtions of
gEfiEventExitBootServicesGuid.
2.3 Then after the unregister function is called, other call back
functions can't out log if them use RSC as DebugLib.
3. The DxeMain will report status code EFI_SW_BS_PC_EXIT_BOOT_SERVICES
after notify all the call back functions of
gEfiEventExitBootServicesGuid.
4. Solution: the StatusCodeHandlerRuntimeDxe.c will not register an
unregister function of gEfiEventExitBootServicesGuid, but unregister it
after receive the status code of EFI_SW_BS_PC_EXIT_BOOT_SERVICES.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Ming Tan <ming.tan@intel.com>
---
V5: Fix an unused var bug and compile error using GCC.
V4: Fix a spell bug in code comment, change 'a' to 'an' before 'unregister'.
V3: Fix a spell bug in commit message, change 'a' to 'an' before 'unregister'.
V2: Add the REF link in commit message.
.../RuntimeDxe/SerialStatusCodeWorker.c | 10 ++++++++++
.../RuntimeDxe/StatusCodeHandlerRuntimeDxe.c | 17 +----------------
.../RuntimeDxe/StatusCodeHandlerRuntimeDxe.h | 11 +++++++++++
3 files changed, 22 insertions(+), 16 deletions(-)
diff --git a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCodeWorker.c b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCodeWorker.c
index 0b98e7ec63..f7ab71e32a 100644
--- a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCodeWorker.c
+++ b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCodeWorker.c
@@ -151,6 +151,16 @@ SerialStatusCodeReportWorker (
//
SerialPortWrite ((UINT8 *) Buffer, CharCount);
+ //
+ // If register an unregister function of gEfiEventExitBootServicesGuid,
+ // then some log called in ExitBootServices() will be lost,
+ // so unregister the handler after receive the value of exit boot service.
+ //
+ if ((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_PROGRESS_CODE &&
+ Value == (EFI_SOFTWARE_EFI_BOOT_SERVICE | EFI_SW_BS_PC_EXIT_BOOT_SERVICES)) {
+ UnregisterBootTimeHandlers();
+ }
+
return EFI_SUCCESS;
}
diff --git a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.c b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.c
index a8c0fe5b71..2e11c1f4d2 100644
--- a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.c
+++ b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.c
@@ -10,23 +10,17 @@
#include "StatusCodeHandlerRuntimeDxe.h"
EFI_EVENT mVirtualAddressChangeEvent = NULL;
-static EFI_EVENT mExitBootServicesEvent = NULL;
EFI_RSC_HANDLER_PROTOCOL *mRscHandlerProtocol = NULL;
/**
Unregister status code callback functions only available at boot time from
report status code router when exiting boot services.
- @param Event Event whose notification function is being invoked.
- @param Context Pointer to the notification function's context, which is
- always zero in current implementation.
-
**/
VOID
EFIAPI
UnregisterBootTimeHandlers (
- IN EFI_EVENT Event,
- IN VOID *Context
+ VOID
)
{
if (PcdGetBool (PcdStatusCodeUseSerial)) {
@@ -178,15 +172,6 @@ StatusCodeHandlerRuntimeDxeEntry (
mRscHandlerProtocol->Register (RtMemoryStatusCodeReportWorker, TPL_HIGH_LEVEL);
}
- Status = gBS->CreateEventEx (
- EVT_NOTIFY_SIGNAL,
- TPL_NOTIFY,
- UnregisterBootTimeHandlers,
- NULL,
- &gEfiEventExitBootServicesGuid,
- &mExitBootServicesEvent
- );
-
Status = gBS->CreateEventEx (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
diff --git a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.h b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.h
index fd4689c2d7..f1789dc538 100644
--- a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.h
+++ b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.h
@@ -118,4 +118,15 @@ RtMemoryStatusCodeReportWorker (
IN EFI_STATUS_CODE_DATA *Data OPTIONAL
);
+/**
+ Unregister status code callback functions only available at boot time from
+ report status code router when exiting boot services.
+
+**/
+VOID
+EFIAPI
+UnregisterBootTimeHandlers (
+ VOID
+ );
+
#endif
--
2.24.0.windows.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* 回复: [edk2-devel] [PATCH v5] MdeModulePkg/Universal/StatusCodeHandler: Fix a bug about log lost
2020-12-17 13:58 [PATCH v5] MdeModulePkg/Universal/StatusCodeHandler: Fix a bug about log lost Tan, Ming
@ 2020-12-18 1:09 ` gaoliming
2020-12-18 1:20 ` Tan, Ming
0 siblings, 1 reply; 4+ messages in thread
From: gaoliming @ 2020-12-18 1:09 UTC (permalink / raw)
To: devel, ming.tan; +Cc: 'Dandan Bi'
Ming:
This change uses the accurate point to exit boot service. It is a good
enhancement.
For the patch, I have one comment that SerialStatusCodeReportWorker()
should call mRscHandlerProtocol unregister itself.
If there are more than one Status code handlers to be unregistered at the
exit boot service, each handler should unregister itself.
Thanks
Liming
> -----邮件原件-----
> 发件人: bounce+27952+69130+4905953+8761045@groups.io
> <bounce+27952+69130+4905953+8761045@groups.io> 代表 Tan, Ming
> 发送时间: 2020年12月17日 21:59
> 收件人: devel@edk2.groups.io
> 抄送: Dandan Bi <dandan.bi@intel.com>; Liming Gao
> <gaoliming@byosoft.com.cn>
> 主题: [edk2-devel] [PATCH v5] MdeModulePkg/Universal/StatusCodeHandler:
> Fix a bug about log lost
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3126
>
> 1. If use PeiDxeDebugLibReportStatusCode as DebugLib, then some logs
> after ExitBootService() will be lost.
> 2. The root cause:
> 2.1 The original code will register an unregister function
> of gEfiEventExitBootServicesGuid, this unregister function will call
> EFI_RSC_HANDLER_PROTOCOL->Unregister and does not support log through
> serial port.
> 2.2 And some other drivers also register call back funtions of
> gEfiEventExitBootServicesGuid.
> 2.3 Then after the unregister function is called, other call back
> functions can't out log if them use RSC as DebugLib.
> 3. The DxeMain will report status code EFI_SW_BS_PC_EXIT_BOOT_SERVICES
> after notify all the call back functions of
> gEfiEventExitBootServicesGuid.
> 4. Solution: the StatusCodeHandlerRuntimeDxe.c will not register an
> unregister function of gEfiEventExitBootServicesGuid, but unregister it
> after receive the status code of EFI_SW_BS_PC_EXIT_BOOT_SERVICES.
>
> Cc: Dandan Bi <dandan.bi@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Signed-off-by: Ming Tan <ming.tan@intel.com>
> ---
> V5: Fix an unused var bug and compile error using GCC.
> V4: Fix a spell bug in code comment, change 'a' to 'an' before
'unregister'.
> V3: Fix a spell bug in commit message, change 'a' to 'an' before
'unregister'.
> V2: Add the REF link in commit message.
>
> .../RuntimeDxe/SerialStatusCodeWorker.c | 10 ++++++++++
> .../RuntimeDxe/StatusCodeHandlerRuntimeDxe.c | 17 +----------------
> .../RuntimeDxe/StatusCodeHandlerRuntimeDxe.h | 11 +++++++++++
> 3 files changed, 22 insertions(+), 16 deletions(-)
>
> diff --git
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> deWorker.c
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> deWorker.c
> index 0b98e7ec63..f7ab71e32a 100644
> ---
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> deWorker.c
> +++
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> deWorker.c
> @@ -151,6 +151,16 @@ SerialStatusCodeReportWorker (
> //
>
> SerialPortWrite ((UINT8 *) Buffer, CharCount);
>
>
>
> + //
>
> + // If register an unregister function of gEfiEventExitBootServicesGuid,
>
> + // then some log called in ExitBootServices() will be lost,
>
> + // so unregister the handler after receive the value of exit boot
service.
>
> + //
>
> + if ((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_PROGRESS_CODE
> &&
>
> + Value == (EFI_SOFTWARE_EFI_BOOT_SERVICE |
> EFI_SW_BS_PC_EXIT_BOOT_SERVICES)) {
>
> + UnregisterBootTimeHandlers();
>
> + }
>
> +
>
> return EFI_SUCCESS;
>
> }
>
>
>
> diff --git
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.c
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.c
> index a8c0fe5b71..2e11c1f4d2 100644
> ---
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.c
> +++
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.c
> @@ -10,23 +10,17 @@
> #include "StatusCodeHandlerRuntimeDxe.h"
>
>
>
> EFI_EVENT mVirtualAddressChangeEvent = NULL;
>
> -static EFI_EVENT mExitBootServicesEvent = NULL;
>
> EFI_RSC_HANDLER_PROTOCOL *mRscHandlerProtocol = NULL;
>
>
>
> /**
>
> Unregister status code callback functions only available at boot time
from
>
> report status code router when exiting boot services.
>
>
>
> - @param Event Event whose notification function is being
> invoked.
>
> - @param Context Pointer to the notification function's context,
> which is
>
> - always zero in current implementation.
>
> -
>
> **/
>
> VOID
>
> EFIAPI
>
> UnregisterBootTimeHandlers (
>
> - IN EFI_EVENT Event,
>
> - IN VOID *Context
>
> + VOID
>
> )
>
> {
>
> if (PcdGetBool (PcdStatusCodeUseSerial)) {
>
> @@ -178,15 +172,6 @@ StatusCodeHandlerRuntimeDxeEntry (
> mRscHandlerProtocol->Register (RtMemoryStatusCodeReportWorker,
> TPL_HIGH_LEVEL);
>
> }
>
>
>
> - Status = gBS->CreateEventEx (
>
> - EVT_NOTIFY_SIGNAL,
>
> - TPL_NOTIFY,
>
> - UnregisterBootTimeHandlers,
>
> - NULL,
>
> - &gEfiEventExitBootServicesGuid,
>
> - &mExitBootServicesEvent
>
> - );
>
> -
>
> Status = gBS->CreateEventEx (
>
> EVT_NOTIFY_SIGNAL,
>
> TPL_NOTIFY,
>
> diff --git
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.h
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.h
> index fd4689c2d7..f1789dc538 100644
> ---
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.h
> +++
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.h
> @@ -118,4 +118,15 @@ RtMemoryStatusCodeReportWorker (
> IN EFI_STATUS_CODE_DATA *Data OPTIONAL
>
> );
>
>
>
> +/**
>
> + Unregister status code callback functions only available at boot time
from
>
> + report status code router when exiting boot services.
>
> +
>
> +**/
>
> +VOID
>
> +EFIAPI
>
> +UnregisterBootTimeHandlers (
>
> + VOID
>
> + );
>
> +
>
> #endif
>
> --
> 2.24.0.windows.2
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#69130): https://edk2.groups.io/g/devel/message/69130
> Mute This Topic: https://groups.io/mt/79036460/4905953
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub
> [gaoliming@byosoft.com.cn]
> -=-=-=-=-=-=
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [edk2-devel] [PATCH v5] MdeModulePkg/Universal/StatusCodeHandler: Fix a bug about log lost
2020-12-18 1:09 ` 回复: [edk2-devel] " gaoliming
@ 2020-12-18 1:20 ` Tan, Ming
2020-12-21 0:58 ` 回复: " gaoliming
0 siblings, 1 reply; 4+ messages in thread
From: Tan, Ming @ 2020-12-18 1:20 UTC (permalink / raw)
To: devel@edk2.groups.io, gaoliming@byosoft.com.cn; +Cc: Bi, Dandan
Liming:
Yes, in another private driver about status code, there are several handlers need to be unregistered, so I create several unregister functions to be called.
And currently the UnregisterBootTimeHandlers function only has one handler need to be unregistered, so I call it directly. If we want to highlight it, I can change the function name to UnregisterSerialBootTimeHandlers().
BR/Tan Ming.
-----Original Message-----
From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of gaoliming
Sent: Friday, December 18, 2020 9:10 AM
To: devel@edk2.groups.io; Tan, Ming <ming.tan@intel.com>
Cc: Bi, Dandan <dandan.bi@intel.com>
Subject: 回复: [edk2-devel] [PATCH v5] MdeModulePkg/Universal/StatusCodeHandler: Fix a bug about log lost
Ming:
This change uses the accurate point to exit boot service. It is a good enhancement.
For the patch, I have one comment that SerialStatusCodeReportWorker() should call mRscHandlerProtocol unregister itself.
If there are more than one Status code handlers to be unregistered at the exit boot service, each handler should unregister itself.
Thanks
Liming
> -----邮件原件-----
> 发件人: bounce+27952+69130+4905953+8761045@groups.io
> <bounce+27952+69130+4905953+8761045@groups.io> 代表 Tan, Ming
> 发送时间: 2020年12月17日 21:59
> 收件人: devel@edk2.groups.io
> 抄送: Dandan Bi <dandan.bi@intel.com>; Liming Gao
> <gaoliming@byosoft.com.cn>
> 主题: [edk2-devel] [PATCH v5] MdeModulePkg/Universal/StatusCodeHandler:
> Fix a bug about log lost
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3126
>
> 1. If use PeiDxeDebugLibReportStatusCode as DebugLib, then some logs
> after ExitBootService() will be lost.
> 2. The root cause:
> 2.1 The original code will register an unregister function of
> gEfiEventExitBootServicesGuid, this unregister function will call
> EFI_RSC_HANDLER_PROTOCOL->Unregister and does not support log through
> serial port.
> 2.2 And some other drivers also register call back funtions of
> gEfiEventExitBootServicesGuid.
> 2.3 Then after the unregister function is called, other call back
> functions can't out log if them use RSC as DebugLib.
> 3. The DxeMain will report status code EFI_SW_BS_PC_EXIT_BOOT_SERVICES
> after notify all the call back functions of
> gEfiEventExitBootServicesGuid.
> 4. Solution: the StatusCodeHandlerRuntimeDxe.c will not register an
> unregister function of gEfiEventExitBootServicesGuid, but unregister
> it after receive the status code of EFI_SW_BS_PC_EXIT_BOOT_SERVICES.
>
> Cc: Dandan Bi <dandan.bi@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Signed-off-by: Ming Tan <ming.tan@intel.com>
> ---
> V5: Fix an unused var bug and compile error using GCC.
> V4: Fix a spell bug in code comment, change 'a' to 'an' before
'unregister'.
> V3: Fix a spell bug in commit message, change 'a' to 'an' before
'unregister'.
> V2: Add the REF link in commit message.
>
> .../RuntimeDxe/SerialStatusCodeWorker.c | 10 ++++++++++
> .../RuntimeDxe/StatusCodeHandlerRuntimeDxe.c | 17 +----------------
> .../RuntimeDxe/StatusCodeHandlerRuntimeDxe.h | 11 +++++++++++
> 3 files changed, 22 insertions(+), 16 deletions(-)
>
> diff --git
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> deWorker.c
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> deWorker.c
> index 0b98e7ec63..f7ab71e32a 100644
> ---
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> deWorker.c
> +++
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> deWorker.c
> @@ -151,6 +151,16 @@ SerialStatusCodeReportWorker (
> //
>
> SerialPortWrite ((UINT8 *) Buffer, CharCount);
>
>
>
> + //
>
> + // If register an unregister function of
> + gEfiEventExitBootServicesGuid,
>
> + // then some log called in ExitBootServices() will be lost,
>
> + // so unregister the handler after receive the value of exit boot
service.
>
> + //
>
> + if ((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_PROGRESS_CODE
> &&
>
> + Value == (EFI_SOFTWARE_EFI_BOOT_SERVICE |
> EFI_SW_BS_PC_EXIT_BOOT_SERVICES)) {
>
> + UnregisterBootTimeHandlers();
>
> + }
>
> +
>
> return EFI_SUCCESS;
>
> }
>
>
>
> diff --git
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.c
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.c
> index a8c0fe5b71..2e11c1f4d2 100644
> ---
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.c
> +++
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.c
> @@ -10,23 +10,17 @@
> #include "StatusCodeHandlerRuntimeDxe.h"
>
>
>
> EFI_EVENT mVirtualAddressChangeEvent = NULL;
>
> -static EFI_EVENT mExitBootServicesEvent = NULL;
>
> EFI_RSC_HANDLER_PROTOCOL *mRscHandlerProtocol = NULL;
>
>
>
> /**
>
> Unregister status code callback functions only available at boot
> time
from
>
> report status code router when exiting boot services.
>
>
>
> - @param Event Event whose notification function is being
> invoked.
>
> - @param Context Pointer to the notification function's context,
> which is
>
> - always zero in current implementation.
>
> -
>
> **/
>
> VOID
>
> EFIAPI
>
> UnregisterBootTimeHandlers (
>
> - IN EFI_EVENT Event,
>
> - IN VOID *Context
>
> + VOID
>
> )
>
> {
>
> if (PcdGetBool (PcdStatusCodeUseSerial)) {
>
> @@ -178,15 +172,6 @@ StatusCodeHandlerRuntimeDxeEntry (
> mRscHandlerProtocol->Register (RtMemoryStatusCodeReportWorker,
> TPL_HIGH_LEVEL);
>
> }
>
>
>
> - Status = gBS->CreateEventEx (
>
> - EVT_NOTIFY_SIGNAL,
>
> - TPL_NOTIFY,
>
> - UnregisterBootTimeHandlers,
>
> - NULL,
>
> - &gEfiEventExitBootServicesGuid,
>
> - &mExitBootServicesEvent
>
> - );
>
> -
>
> Status = gBS->CreateEventEx (
>
> EVT_NOTIFY_SIGNAL,
>
> TPL_NOTIFY,
>
> diff --git
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.h
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.h
> index fd4689c2d7..f1789dc538 100644
> ---
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.h
> +++
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.h
> @@ -118,4 +118,15 @@ RtMemoryStatusCodeReportWorker (
> IN EFI_STATUS_CODE_DATA *Data OPTIONAL
>
> );
>
>
>
> +/**
>
> + Unregister status code callback functions only available at boot
> + time
from
>
> + report status code router when exiting boot services.
>
> +
>
> +**/
>
> +VOID
>
> +EFIAPI
>
> +UnregisterBootTimeHandlers (
>
> + VOID
>
> + );
>
> +
>
> #endif
>
> --
> 2.24.0.windows.2
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#69130):
> https://edk2.groups.io/g/devel/message/69130
> Mute This Topic: https://groups.io/mt/79036460/4905953
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub
> [gaoliming@byosoft.com.cn]
> -=-=-=-=-=-=
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* 回复: [edk2-devel] [PATCH v5] MdeModulePkg/Universal/StatusCodeHandler: Fix a bug about log lost
2020-12-18 1:20 ` Tan, Ming
@ 2020-12-21 0:58 ` gaoliming
0 siblings, 0 replies; 4+ messages in thread
From: gaoliming @ 2020-12-21 0:58 UTC (permalink / raw)
To: 'Tan, Ming', devel; +Cc: 'Bi, Dandan', gaoliming
Ming:
In fact, UnregisterBootTimeHandlers is not required any more. Each ReportWorker() should call mRscHandlerProtocol to unregister itself.
If UnregisterBootTimeHandlers is still kept, it may be wrongly used for the future reportworker extension.
Thanks
Liming
> -----邮件原件-----
> 发件人: Tan, Ming <ming.tan@intel.com>
> 发送时间: 2020年12月18日 9:21
> 收件人: devel@edk2.groups.io; gaoliming@byosoft.com.cn
> 抄送: Bi, Dandan <dandan.bi@intel.com>
> 主题: RE: [edk2-devel] [PATCH v5]
> MdeModulePkg/Universal/StatusCodeHandler: Fix a bug about log lost
>
> Liming:
> Yes, in another private driver about status code, there are several handlers
> need to be unregistered, so I create several unregister functions to be called.
> And currently the UnregisterBootTimeHandlers function only has one
> handler need to be unregistered, so I call it directly. If we want to highlight it, I
> can change the function name to UnregisterSerialBootTimeHandlers().
>
> BR/Tan Ming.
>
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of gaoliming
> Sent: Friday, December 18, 2020 9:10 AM
> To: devel@edk2.groups.io; Tan, Ming <ming.tan@intel.com>
> Cc: Bi, Dandan <dandan.bi@intel.com>
> Subject: 回复: [edk2-devel] [PATCH v5]
> MdeModulePkg/Universal/StatusCodeHandler: Fix a bug about log lost
>
> Ming:
> This change uses the accurate point to exit boot service. It is a good
> enhancement.
>
> For the patch, I have one comment that SerialStatusCodeReportWorker()
> should call mRscHandlerProtocol unregister itself.
> If there are more than one Status code handlers to be unregistered at the
> exit boot service, each handler should unregister itself.
>
> Thanks
> Liming
> > -----邮件原件-----
> > 发件人: bounce+27952+69130+4905953+8761045@groups.io
> > <bounce+27952+69130+4905953+8761045@groups.io> 代表 Tan, Ming
> > 发送时间: 2020年12月17日 21:59
> > 收件人: devel@edk2.groups.io
> > 抄送: Dandan Bi <dandan.bi@intel.com>; Liming Gao
> > <gaoliming@byosoft.com.cn>
> > 主题: [edk2-devel] [PATCH v5]
> MdeModulePkg/Universal/StatusCodeHandler:
> > Fix a bug about log lost
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3126
> >
> > 1. If use PeiDxeDebugLibReportStatusCode as DebugLib, then some logs
> > after ExitBootService() will be lost.
> > 2. The root cause:
> > 2.1 The original code will register an unregister function of
> > gEfiEventExitBootServicesGuid, this unregister function will call
> > EFI_RSC_HANDLER_PROTOCOL->Unregister and does not support log
> through
> > serial port.
> > 2.2 And some other drivers also register call back funtions of
> > gEfiEventExitBootServicesGuid.
> > 2.3 Then after the unregister function is called, other call back
> > functions can't out log if them use RSC as DebugLib.
> > 3. The DxeMain will report status code
> EFI_SW_BS_PC_EXIT_BOOT_SERVICES
> > after notify all the call back functions of
> > gEfiEventExitBootServicesGuid.
> > 4. Solution: the StatusCodeHandlerRuntimeDxe.c will not register an
> > unregister function of gEfiEventExitBootServicesGuid, but unregister
> > it after receive the status code of EFI_SW_BS_PC_EXIT_BOOT_SERVICES.
> >
> > Cc: Dandan Bi <dandan.bi@intel.com>
> > Cc: Liming Gao <gaoliming@byosoft.com.cn>
> > Signed-off-by: Ming Tan <ming.tan@intel.com>
> > ---
> > V5: Fix an unused var bug and compile error using GCC.
> > V4: Fix a spell bug in code comment, change 'a' to 'an' before
> 'unregister'.
> > V3: Fix a spell bug in commit message, change 'a' to 'an' before
> 'unregister'.
> > V2: Add the REF link in commit message.
> >
> > .../RuntimeDxe/SerialStatusCodeWorker.c | 10 ++++++++++
> > .../RuntimeDxe/StatusCodeHandlerRuntimeDxe.c | 17 +----------------
> > .../RuntimeDxe/StatusCodeHandlerRuntimeDxe.h | 11 +++++++++++
> > 3 files changed, 22 insertions(+), 16 deletions(-)
> >
> > diff --git
> >
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> > deWorker.c
> >
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> > deWorker.c
> > index 0b98e7ec63..f7ab71e32a 100644
> > ---
> >
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> > deWorker.c
> > +++
> >
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> > deWorker.c
> > @@ -151,6 +151,16 @@ SerialStatusCodeReportWorker (
> > //
> >
> > SerialPortWrite ((UINT8 *) Buffer, CharCount);
> >
> >
> >
> > + //
> >
> > + // If register an unregister function of
> > + gEfiEventExitBootServicesGuid,
> >
> > + // then some log called in ExitBootServices() will be lost,
> >
> > + // so unregister the handler after receive the value of exit boot
> service.
> >
> > + //
> >
> > + if ((CodeType & EFI_STATUS_CODE_TYPE_MASK) ==
> EFI_PROGRESS_CODE
> > &&
> >
> > + Value == (EFI_SOFTWARE_EFI_BOOT_SERVICE |
> > EFI_SW_BS_PC_EXIT_BOOT_SERVICES)) {
> >
> > + UnregisterBootTimeHandlers();
> >
> > + }
> >
> > +
> >
> > return EFI_SUCCESS;
> >
> > }
> >
> >
> >
> > diff --git
> >
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> > ndlerRuntimeDxe.c
> >
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> > ndlerRuntimeDxe.c
> > index a8c0fe5b71..2e11c1f4d2 100644
> > ---
> >
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> > ndlerRuntimeDxe.c
> > +++
> >
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> > ndlerRuntimeDxe.c
> > @@ -10,23 +10,17 @@
> > #include "StatusCodeHandlerRuntimeDxe.h"
> >
> >
> >
> > EFI_EVENT mVirtualAddressChangeEvent = NULL;
> >
> > -static EFI_EVENT mExitBootServicesEvent = NULL;
> >
> > EFI_RSC_HANDLER_PROTOCOL *mRscHandlerProtocol = NULL;
> >
> >
> >
> > /**
> >
> > Unregister status code callback functions only available at boot
> > time
> from
> >
> > report status code router when exiting boot services.
> >
> >
> >
> > - @param Event Event whose notification function is being
> > invoked.
> >
> > - @param Context Pointer to the notification function's context,
> > which is
> >
> > - always zero in current implementation.
> >
> > -
> >
> > **/
> >
> > VOID
> >
> > EFIAPI
> >
> > UnregisterBootTimeHandlers (
> >
> > - IN EFI_EVENT Event,
> >
> > - IN VOID *Context
> >
> > + VOID
> >
> > )
> >
> > {
> >
> > if (PcdGetBool (PcdStatusCodeUseSerial)) {
> >
> > @@ -178,15 +172,6 @@ StatusCodeHandlerRuntimeDxeEntry (
> > mRscHandlerProtocol->Register
> (RtMemoryStatusCodeReportWorker,
> > TPL_HIGH_LEVEL);
> >
> > }
> >
> >
> >
> > - Status = gBS->CreateEventEx (
> >
> > - EVT_NOTIFY_SIGNAL,
> >
> > - TPL_NOTIFY,
> >
> > - UnregisterBootTimeHandlers,
> >
> > - NULL,
> >
> > - &gEfiEventExitBootServicesGuid,
> >
> > - &mExitBootServicesEvent
> >
> > - );
> >
> > -
> >
> > Status = gBS->CreateEventEx (
> >
> > EVT_NOTIFY_SIGNAL,
> >
> > TPL_NOTIFY,
> >
> > diff --git
> >
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> > ndlerRuntimeDxe.h
> >
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> > ndlerRuntimeDxe.h
> > index fd4689c2d7..f1789dc538 100644
> > ---
> >
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> > ndlerRuntimeDxe.h
> > +++
> >
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> > ndlerRuntimeDxe.h
> > @@ -118,4 +118,15 @@ RtMemoryStatusCodeReportWorker (
> > IN EFI_STATUS_CODE_DATA *Data OPTIONAL
> >
> > );
> >
> >
> >
> > +/**
> >
> > + Unregister status code callback functions only available at boot
> > + time
> from
> >
> > + report status code router when exiting boot services.
> >
> > +
> >
> > +**/
> >
> > +VOID
> >
> > +EFIAPI
> >
> > +UnregisterBootTimeHandlers (
> >
> > + VOID
> >
> > + );
> >
> > +
> >
> > #endif
> >
> > --
> > 2.24.0.windows.2
> >
> >
> >
> > -=-=-=-=-=-=
> > Groups.io Links: You receive all messages sent to this group.
> > View/Reply Online (#69130):
> > https://edk2.groups.io/g/devel/message/69130
> > Mute This Topic: https://groups.io/mt/79036460/4905953
> > Group Owner: devel+owner@edk2.groups.io
> > Unsubscribe: https://edk2.groups.io/g/devel/unsub
> > [gaoliming@byosoft.com.cn]
> > -=-=-=-=-=-=
> >
>
>
>
>
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-12-21 0:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-12-17 13:58 [PATCH v5] MdeModulePkg/Universal/StatusCodeHandler: Fix a bug about log lost Tan, Ming
2020-12-18 1:09 ` 回复: [edk2-devel] " gaoliming
2020-12-18 1:20 ` Tan, Ming
2020-12-21 0:58 ` 回复: " gaoliming
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox