From: "gaoliming" <gaoliming@byosoft.com.cn>
To: "'RichardHo [何明忠]'" <RichardHo@ami.com>, devel@edk2.groups.io
Cc: "'Andrew Fish'" <afish@apple.com>,
"'Leif Lindholm'" <quic_llindhol@quicinc.com>,
"'Michael D Kinney'" <michael.d.kinney@intel.com>,
"'Michael Kubacki'" <michael.kubacki@microsoft.com>,
"'Leif Lindholm'" <leif@nuviainc.com>,
"'Zhiguang Liu'" <zhiguang.liu@intel.com>,
"'Hao A Wu'" <hao.a.wu@intel.com>, "'Ray Ni'" <ray.ni@intel.com>,
"'TonyLo [羅金松]'" <TonyLo@ami.com>,
"'Demeter, Miki'" <miki.demeter@intel.com>
Subject: 回复: [EXTERNAL] 回复: [edk2-devel] [PATCH] UsbNetworkPkg: add USB network devices support
Date: Fri, 2 Sep 2022 16:13:10 +0800 [thread overview]
Message-ID: <006e01d8bea3$d701dd80$85059880$@byosoft.com.cn> (raw)
In-Reply-To: <DM5PR10MB1660DB40E98FF2775301A772B07B9@DM5PR10MB1660.namprd10.prod.outlook.com>
Richard:
ReadMe introduces the module behavior. But, it doesn't provide the code design. So, I want to confirm whether NetworkCommon driver support PXE.
Thanks
Liming
> -----邮件原件-----
> 发件人: RichardHo [何明忠] <RichardHo@ami.com>
> 发送时间: 2022年9月1日 11:47
> 收件人: gaoliming <gaoliming@byosoft.com.cn>; devel@edk2.groups.io
> 抄送: 'Andrew Fish' <afish@apple.com>; 'Leif Lindholm'
> <quic_llindhol@quicinc.com>; 'Michael D Kinney'
> <michael.d.kinney@intel.com>; 'Michael Kubacki'
> <michael.kubacki@microsoft.com>; 'Leif Lindholm' <leif@nuviainc.com>;
> 'Zhiguang Liu' <zhiguang.liu@intel.com>; 'Hao A Wu' <hao.a.wu@intel.com>;
> 'Ray Ni' <ray.ni@intel.com>; TonyLo [羅金松] <TonyLo@ami.com>; 'Demeter,
> Miki' <miki.demeter@intel.com>
> 主题: RE: [EXTERNAL] 回复: [edk2-devel] [PATCH] UsbNetworkPkg: add USB
> network devices support
>
> Hi Liming,
>
> Please see more information in ReadMe.md for your question.
>
> Thanks,
> Richard
>
>
> -----Original Message-----
> From: gaoliming <gaoliming@byosoft.com.cn>
> Sent: 2022年8月31日 5:47 PM
> To: devel@edk2.groups.io; RichardHo [何明忠] <RichardHo@ami.com>
> Cc: 'Andrew Fish' <afish@apple.com>; 'Leif Lindholm'
> <quic_llindhol@quicinc.com>; 'Michael D Kinney'
> <michael.d.kinney@intel.com>; 'Michael Kubacki'
> <michael.kubacki@microsoft.com>; 'Leif Lindholm' <leif@nuviainc.com>;
> 'Zhiguang Liu' <zhiguang.liu@intel.com>; 'Hao A Wu' <hao.a.wu@intel.com>;
> 'Ray Ni' <ray.ni@intel.com>; TonyLo [羅金松] <TonyLo@ami.com>; 'Demeter,
> Miki' <miki.demeter@intel.com>
> Subject: [EXTERNAL] 回复: [edk2-devel] [PATCH] UsbNetworkPkg: add USB
> network devices support
>
>
> **CAUTION: The e-mail below is from an external source. Please exercise
> caution before opening attachments, clicking links, or following guidance.**
>
> Richard:
> Thanks for your contribution. This is new feature. Can you submit feature
> request to
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugzil
> la.tianocore.org%2F&data=05%7C01%7Crichardho%40ami.com%7C5f95
> 0debbf01487623db08da8b35b846%7C27e97857e15f486cb58e86c2b3040f93
> %7C1%7C0%7C637975360096010785%7CUnknown%7CTWFpbGZsb3d8eyJW
> IjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C
> 3000%7C%7C%7C&sdata=zl%2F13Q5OOLBzRtb37HvG5j0i6x6fh%2BCIo
> 0fqkWnbaJU%3D&reserved=0? If you have no account in
> https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugzil
> la.tianocore.org%2F&data=05%7C01%7Crichardho%40ami.com%7C5f95
> 0debbf01487623db08da8b35b846%7C27e97857e15f486cb58e86c2b3040f93
> %7C1%7C0%7C637975360096010785%7CUnknown%7CTWFpbGZsb3d8eyJW
> IjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C
> 3000%7C%7C%7C&sdata=zl%2F13Q5OOLBzRtb37HvG5j0i6x6fh%2BCIo
> 0fqkWnbaJU%3D&reserved=0, you can ask help for 'Demeter, Miki'
> <miki.
> demeter@intel.com>.
>
> For the code, what's the purpose of
> UsbNetworkPkg/NetworkCommon/PxeFunction.c? Does NetworkCommon
> support PXE?
>
> Thanks
> Liming
> > -----邮件原件-----
> > 发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表 RichardHo
> > [何明忠] via groups.io
> > 发送时间: 2022年8月31日 10:31
> > 收件人: devel@edk2.groups.io
> > 抄送: Andrew Fish <afish@apple.com>; Leif Lindholm
> > <quic_llindhol@quicinc.com>; Michael D Kinney
> > <michael.d.kinney@intel.com>; Michael Kubacki
> > <michael.kubacki@microsoft.com>; Leif Lindholm <leif@nuviainc.com>;
> > Zhiguang Liu <zhiguang.liu@intel.com>; Liming Gao
> > <gaoliming@byosoft.com.cn>; Hao A Wu <hao.a.wu@intel.com>; Ray Ni
> > <ray.ni@intel.com>; TonyLo [羅金松] <TonyLo@ami.com>
> > 主题: [edk2-devel] [PATCH] UsbNetworkPkg: add USB network devices
> > support
> >
> > UsbNetworkPkg provides network functions for USB ACM, USB NCM, and
> USB
> > RNDIS network device.
> >
> > Signed-off-by: Richard Ho <richardho@ami.com>
> > Cc: Andrew Fish <afish@apple.com>
> > Cc: Leif Lindholm <quic_llindhol@quicinc.com>
> > Cc: Michael D Kinney <michael.d.kinney@intel.com>
> > Cc: Michael Kubacki <michael.kubacki@microsoft.com>
> > Cc: Leif Lindholm <leif@nuviainc.com>
> > Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> > Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
> > Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
> > Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
> > Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
> > Reviewed-by: Ray Ni <ray.ni@intel.com>
> > Reviewed-by: Tony Lo <tonylo@ami.com>
> > ---
> > UsbNetworkPkg/Config/UsbNetworkPkg.inc.dsc | 9 +
> > .../Config/UsbNetworkPkgComponentsDxe.inc.dsc | 20 +
> > .../Config/UsbNetworkPkgComponentsDxe.inc.fdf | 21 +
> > .../Config/UsbNetworkPkgDefines.inc.dsc | 23 +
> > .../Include/Protocol/UsbEthernetProtocol.h | 872 +++++++++
> > UsbNetworkPkg/NetworkCommon/ComponentName.c | 264 +++
> > UsbNetworkPkg/NetworkCommon/DriverBinding.c | 583 ++++++
> > UsbNetworkPkg/NetworkCommon/DriverBinding.h | 263 +++
> > UsbNetworkPkg/NetworkCommon/NetworkCommon.inf | 43 +
> > UsbNetworkPkg/NetworkCommon/PxeFunction.c | 1734
> > +++++++++++++++++
> > UsbNetworkPkg/ReadMe.md | 65 +
> > UsbNetworkPkg/ReleaseNotes.md | 11 +
> > UsbNetworkPkg/UsbCdcEcm/ComponentName.c | 170 ++
> > UsbNetworkPkg/UsbCdcEcm/UsbCdcEcm.c | 504 +++++
> > UsbNetworkPkg/UsbCdcEcm/UsbCdcEcm.h | 211 ++
> > UsbNetworkPkg/UsbCdcEcm/UsbCdcEcm.inf | 41 +
> > UsbNetworkPkg/UsbCdcEcm/UsbEcmFunction.c | 861 ++++++++
> > UsbNetworkPkg/UsbCdcNcm/ComponentName.c | 170 ++
> > UsbNetworkPkg/UsbCdcNcm/UsbCdcNcm.c | 508 +++++
> > UsbNetworkPkg/UsbCdcNcm/UsbCdcNcm.h | 245 +++
> > UsbNetworkPkg/UsbCdcNcm/UsbCdcNcm.inf | 41 +
> > UsbNetworkPkg/UsbCdcNcm/UsbNcmFunction.c | 946
> +++++++++
> > UsbNetworkPkg/UsbNetworkPkg.dec | 32 +
> > UsbNetworkPkg/UsbRndis/ComponentName.c | 172 ++
> > UsbNetworkPkg/UsbRndis/UsbRndis.c | 848 ++++++++
> > UsbNetworkPkg/UsbRndis/UsbRndis.h | 569 ++++++
> > UsbNetworkPkg/UsbRndis/UsbRndis.inf | 41 +
> > UsbNetworkPkg/UsbRndis/UsbRndisFunction.c | 1587
> > +++++++++++++++
> > 28 files changed, 10854 insertions(+) create mode 100644
> > UsbNetworkPkg/Config/UsbNetworkPkg.inc.dsc
> > create mode 100644
> > UsbNetworkPkg/Config/UsbNetworkPkgComponentsDxe.inc.dsc
> > create mode 100644
> > UsbNetworkPkg/Config/UsbNetworkPkgComponentsDxe.inc.fdf
> > create mode 100644
> > UsbNetworkPkg/Config/UsbNetworkPkgDefines.inc.dsc
> > create mode 100644
> > UsbNetworkPkg/Include/Protocol/UsbEthernetProtocol.h
> > create mode 100644
> > UsbNetworkPkg/NetworkCommon/ComponentName.c
> > create mode 100644 UsbNetworkPkg/NetworkCommon/DriverBinding.c
> > create mode 100644 UsbNetworkPkg/NetworkCommon/DriverBinding.h
> > create mode 100644
> > UsbNetworkPkg/NetworkCommon/NetworkCommon.inf
> > create mode 100644 UsbNetworkPkg/NetworkCommon/PxeFunction.c
> > create mode 100644 UsbNetworkPkg/ReadMe.md create mode 100644
> > UsbNetworkPkg/ReleaseNotes.md create mode 100644
> > UsbNetworkPkg/UsbCdcEcm/ComponentName.c
> > create mode 100644 UsbNetworkPkg/UsbCdcEcm/UsbCdcEcm.c
> > create mode 100644 UsbNetworkPkg/UsbCdcEcm/UsbCdcEcm.h
> > create mode 100644 UsbNetworkPkg/UsbCdcEcm/UsbCdcEcm.inf
> > create mode 100644 UsbNetworkPkg/UsbCdcEcm/UsbEcmFunction.c
> > create mode 100644 UsbNetworkPkg/UsbCdcNcm/ComponentName.c
> > create mode 100644 UsbNetworkPkg/UsbCdcNcm/UsbCdcNcm.c
> > create mode 100644 UsbNetworkPkg/UsbCdcNcm/UsbCdcNcm.h
> > create mode 100644 UsbNetworkPkg/UsbCdcNcm/UsbCdcNcm.inf
> > create mode 100644 UsbNetworkPkg/UsbCdcNcm/UsbNcmFunction.c
> > create mode 100644 UsbNetworkPkg/UsbNetworkPkg.dec create mode
> > 100644 UsbNetworkPkg/UsbRndis/ComponentName.c
> > create mode 100644 UsbNetworkPkg/UsbRndis/UsbRndis.c create
> mode
> > 100644 UsbNetworkPkg/UsbRndis/UsbRndis.h create mode 100644
> > UsbNetworkPkg/UsbRndis/UsbRndis.inf
> > create mode 100644 UsbNetworkPkg/UsbRndis/UsbRndisFunction.c
> >
> >
> >
>
>
>
> -The information contained in this message may be confidential and
> proprietary to American Megatrends (AMI). This communication is intended to
> be read only by the individual or entity to whom it is addressed or by their
> designee. If the reader of this message is not the intended recipient, you are
> on notice that any distribution of this message, in any form, is strictly
> prohibited. Please promptly notify the sender by reply e-mail or by telephone
> at 770-246-8600, and then delete or destroy all copies of the transmission.
next prev parent reply other threads:[~2022-09-02 8:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-31 2:31 [PATCH] UsbNetworkPkg: add USB network devices support RichardHo [何明忠]
2022-08-31 2:55 ` Wu, Hao A
2022-08-31 9:46 ` 回复: [edk2-devel] " gaoliming
2022-09-01 3:46 ` RichardHo [何明忠]
2022-09-01 4:19 ` Chang, Abner
2022-09-02 8:13 ` gaoliming [this message]
2022-09-02 9:04 ` RichardHo [何明忠]
2022-08-31 12:15 ` Rebecca Cran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='006e01d8bea3$d701dd80$85059880$@byosoft.com.cn' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox