From: "gaoliming" <gaoliming@byosoft.com.cn>
To: "'Kinney, Michael D'" <michael.d.kinney@intel.com>,
<devel@edk2.groups.io>
Cc: "'Liu, Zhiguang'" <zhiguang.liu@intel.com>,
"'Michael Kubacki'" <michael.kubacki@microsoft.com>
Subject: 回复: [edk2-devel] 回复: [Patch V2 1/7] MdePkg/Include: Enhance DebugLib to support reproduce builds
Date: Thu, 4 Nov 2021 13:24:13 +0800 [thread overview]
Message-ID: <007701d7d13c$3480faf0$9d82f0d0$@byosoft.com.cn> (raw)
In-Reply-To: <CO1PR11MB4929FDE40D1653B132DD7D46D28B9@CO1PR11MB4929.namprd11.prod.outlook.com>
Mike:
OK. So, this change is to pass ECC. Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Thanks
Liming
> -----邮件原件-----
> 发件人: Kinney, Michael D <michael.d.kinney@intel.com>
> 发送时间: 2021年11月2日 15:05
> 收件人: devel@edk2.groups.io; gaoliming@byosoft.com.cn; Kinney, Michael
> D <michael.d.kinney@intel.com>
> 抄送: Liu, Zhiguang <zhiguang.liu@intel.com>; 'Michael Kubacki'
> <michael.kubacki@microsoft.com>
> 主题: RE: [edk2-devel] 回复: [Patch V2 1/7] MdePkg/Include: Enhance
> DebugLib to support reproduce builds
>
>
>
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> gaoliming
> > Sent: Monday, November 1, 2021 7:12 PM
> > To: Kinney, Michael D <michael.d.kinney@intel.com>;
> devel@edk2.groups.io
> > Cc: Liu, Zhiguang <zhiguang.liu@intel.com>; 'Michael Kubacki'
> <michael.kubacki@microsoft.com>
> > Subject: [edk2-devel] 回复: [Patch V2 1/7] MdePkg/Include: Enhance
> DebugLib to support reproduce builds
> >
> > Mike:
> > I add my comments.
> >
> > Thanks
> > Liming
> > > -----邮件原件-----
> > > 发件人: Michael D Kinney <michael.d.kinney@intel.com>
> > > 发送时间: 2021年11月2日 5:38
> > > 收件人: devel@edk2.groups.io
> > > 抄送: Liming Gao <gaoliming@byosoft.com.cn>; Zhiguang Liu
> > > <zhiguang.liu@intel.com>; Michael Kubacki
> > > <michael.kubacki@microsoft.com>
> > > 主题: [Patch V2 1/7] MdePkg/Include: Enhance DebugLib to support
> > > reproduce builds
> > >
> > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3688
> > >
> > > * Add DEBUG_LINE_NUMBER define to DebugLib.h that is
> > > by default mapped to __LINE__. A build can define
> > > DEBUG_LINE_NUMBER to use a fixed value.
> > > * Add DEBUG_EXPRESSION_STRING(Expression) macros to
> > > DebugLib.h that is by default mapped to #Expression.
> > > A build can define DEBUG_EXPRESSION_STRING_VALUE to
> > > set all expression strings to a fixed string value.
> > >
> > > Cc: Liming Gao <gaoliming@byosoft.com.cn>
> > > Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> > > Cc: Michael Kubacki <michael.kubacki@microsoft.com>
> > > Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
> > > ---
> > > MdePkg/Include/Library/DebugLib.h | 43
> > > ++++++++++++++++++++++++++++---
> > > 1 file changed, 39 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/MdePkg/Include/Library/DebugLib.h
> > > b/MdePkg/Include/Library/DebugLib.h
> > > index 4cacd4b8e243..7fb75f956c6e 100644
> > > --- a/MdePkg/Include/Library/DebugLib.h
> > > +++ b/MdePkg/Include/Library/DebugLib.h
> > > @@ -71,6 +71,41 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> > > #define EFI_D_VERBOSE DEBUG_VERBOSE
> > > #define EFI_D_ERROR DEBUG_ERROR
> > >
> > > +//
> > > +// Source file line number.
> > > +// Default is use the to compiler provided __LINE__ macro value. The
> > > __LINE__
> > > +// mapping can be overriden by predefining DEBUG_LINE_NUMBER
> > > +//
> > > +// Defining DEBUG_LINE_NUMBER to a fixed value is useful when
> comparing
> > > builds
> > > +// across source code formatting changes that may add/remove lines in a
> > > source
> > > +// file.
> > > +//
> > > +#ifdef DEBUG_LINE_NUMBER
> > > +#else
> > > +#define DEBUG_LINE_NUMBER __LINE__
> > > +#endif
> >
> > How about #ifndef DEBUG_LINE_NUMBER?
>
> I tried that first. ECC flags it as an error thinking it is an include guard
> macro.
> We need to fix ECC to not report this as an error.
> This style passes ECC and all EDK II CI tests.
>
> >
> > Thanks
> > Liming
> > > +
> > > +/**
> > > + Macro that converts a Boolean expression to a Null-terminated ASCII
> > > string.
> > > +
> > > + The default is to use the C pre-processor stringizing operator '#' to
> > add
> > > + quotes around the C expression. If
> DEBUG_EXPRESSION_STRING_VALUE
> > > is defined
> > > + then the C expression is converted to the fixed string value.
> > > +
> > > + Defining DEBUG_EXPRESSION_STRING_VALUE to a fixed value is
> useful
> > > when
> > > + comparing builds across source code formatting changes that may
> make
> > > + changes to spaces or parenthesis in a Boolean expression.
> > > +
> > > + @param Expression Boolean expression.
> > > +
> > > +**/
> > > +
> > > +#ifdef DEBUG_EXPRESSION_STRING_VALUE
> > > +#define DEBUG_EXPRESSION_STRING(Expression)
> > > DEBUG_EXPRESSION_STRING_VALUE
> > > +#else
> > > +#define DEBUG_EXPRESSION_STRING(Expression) #Expression
> > > +#endif
> > > +
> > > /**
> > > Prints a debug message to the debug output device if the specified
> > error
> > > level is enabled.
> > >
> > > @@ -310,15 +345,15 @@ UnitTestDebugAssert (
> > > );
> > >
> > > #if defined(__clang__) && defined(__FILE_NAME__)
> > > -#define _ASSERT(Expression) UnitTestDebugAssert (__FILE_NAME__,
> > > __LINE__, #Expression)
> > > +#define _ASSERT(Expression) UnitTestDebugAssert (__FILE_NAME__,
> > > DEBUG_LINE_NUMBER, DEBUG_EXPRESSION_STRING (Expression))
> > > #else
> > > -#define _ASSERT(Expression) UnitTestDebugAssert (__FILE__,
> __LINE__,
> > > #Expression)
> > > +#define _ASSERT(Expression) UnitTestDebugAssert (__FILE__,
> > > DEBUG_LINE_NUMBER, DEBUG_EXPRESSION_STRING (Expression))
> > > #endif
> > > #else
> > > #if defined(__clang__) && defined(__FILE_NAME__)
> > > -#define _ASSERT(Expression) DebugAssert (__FILE_NAME__, __LINE__,
> > > #Expression)
> > > +#define _ASSERT(Expression) DebugAssert (__FILE_NAME__,
> > > DEBUG_LINE_NUMBER, DEBUG_EXPRESSION_STRING (Expression))
> > > #else
> > > -#define _ASSERT(Expression) DebugAssert (__FILE__, __LINE__,
> > > #Expression)
> > > +#define _ASSERT(Expression) DebugAssert (__FILE__,
> > > DEBUG_LINE_NUMBER, DEBUG_EXPRESSION_STRING (Expression))
> > > #endif
> > > #endif
> > >
> > > --
> > > 2.32.0.windows.1
> >
> >
> >
> >
> >
> >
> >
> >
> >
next prev parent reply other threads:[~2021-11-04 5:24 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-01 21:37 [Patch V2 0/7] Reproduce builds across source format changes Michael D Kinney
2021-11-01 21:37 ` [Patch V2 1/7] MdePkg/Include: Enhance DebugLib to support reproduce builds Michael D Kinney
2021-11-02 2:12 ` 回复: " gaoliming
2021-11-02 7:05 ` [edk2-devel] " Michael D Kinney
2021-11-04 5:24 ` gaoliming [this message]
2021-11-01 21:37 ` [Patch V2 2/7] MdePkg: Reproduce builds across source format changes Michael D Kinney
2021-11-01 21:37 ` [Patch V2 3/7] ArmPkg: " Michael D Kinney
2021-11-01 21:37 ` [Patch V2 4/7] MdeModulePkg: " Michael D Kinney
2021-11-01 21:37 ` [Patch V2 5/7] NetworkPkg: " Michael D Kinney
2021-11-08 17:09 ` [edk2-devel] " Maciej Rabeda
2021-11-01 21:37 ` [Patch V2 6/7] SecurityPkg: " Michael D Kinney
2021-11-02 0:14 ` Yao, Jiewen
2021-11-01 21:37 ` [Patch V2 7/7] OvmfPkg: " Michael D Kinney
2021-11-05 3:18 ` Yao, Jiewen
2021-11-02 2:31 ` 回复: [Patch V2 0/7] " gaoliming
2021-11-02 7:10 ` Michael D Kinney
2021-11-04 5:15 ` 回复: [edk2-devel] " gaoliming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='007701d7d13c$3480faf0$9d82f0d0$@byosoft.com.cn' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox