From: "PierreGondois" <pierre.gondois@arm.com>
To: gaoliming <gaoliming@byosoft.com.cn>,
devel@edk2.groups.io, Rebecca Cran <rebecca@bsdio.com>
Cc: 'Michael D Kinney' <michael.d.kinney@intel.com>,
'Zhiguang Liu' <zhiguang.liu@intel.com>,
'Jiewen Yao' <jiewen.yao@intel.com>,
'Jian J Wang' <jian.j.wang@intel.com>,
'Ard Biesheuvel' <ardb+tianocore@kernel.org>,
'Sami Mujawar' <sami.mujawar@arm.com>,
'Jose Marinho' <Jose.Marinho@arm.com>,
'Samer El-Haj-Mahmoud' <Samer.El-Haj-Mahmoud@arm.com>
Subject: Re: 回复: [edk2-devel] [PATCH v1 0/8] SecurityPkg/MdePkg: RngLib GUID
Date: Tue, 27 Jun 2023 09:19:13 +0200 [thread overview]
Message-ID: <0085ba1c-5086-79a9-d2cd-40551cf61355@arm.com> (raw)
In-Reply-To: <03e401d9a712$f31b68d0$d9523a70$@byosoft.com.cn>
+ Rebecca
Hello Liming,
PcdCpuRngSupportedAlgorithm is currently not set by any platform in the edk2 or edk2-platforms repository.
It was first introduced by Rebecca in:
commit 4e5ecdbac8bd ("SecurityPkg: Add support for RngDxe on AARCH64")
Except if Rebecca sees an issue in this change, I think this is ok.
Regards,
Pierre
On 6/25/23 05:13, gaoliming wrote:
> Pierre:
> This patch set moves PCD from gEfiSecurityPkgTokenSpaceGuid.PcdCpuRngSupportedAlgorithm to MdePkg. It may impact the platform those set this PCD in their DSC. Have you evaluated its impact?
>
> Thanks
> Liming
>> -----邮件原件-----
>> 发件人: Pierre Gondois <pierre.gondois@arm.com>
>> 发送时间: 2023年6月23日 17:02
>> 收件人: devel@edk2.groups.io
>> 抄送: Michael D Kinney <michael.d.kinney@intel.com>; Liming Gao
>> <gaoliming@byosoft.com.cn>; Zhiguang Liu <zhiguang.liu@intel.com>; Jiewen
>> Yao <jiewen.yao@intel.com>; Jian J Wang <jian.j.wang@intel.com>; Ard
>> Biesheuvel <ardb+tianocore@kernel.org>; Sami Mujawar
>> <sami.mujawar@arm.com>; Jose Marinho <Jose.Marinho@arm.com>; Samer
>> El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
>> 主题: Re: [edk2-devel] [PATCH v1 0/8] SecurityPkg/MdePkg: RngLib GUID
>>
>> Hello,
>> Just a ping for the patch-set,
>>
>> Regards,
>> Pierre
>>
>> On 5/9/23 09:40, PierreGondois via groups.io wrote:
>>> From: Pierre Gondois <pierre.gondois@arm.com>
>>>
>>> This patchset follows the 'code first' approach and relies on [1].
>>> This patchset follows the thread at [3] that aims to solve [2].
>>> [1] and [2] are bound and this patchset aims to solve both.
>>>
>>> In this patchset:
>>> a-
>>> The RngDxe can rely on the RngLib. However the RngLib has no
>>> interface allowing to describe which Rng algorithm is implemented.
>>> The RngDxe must advertise the algorithm that are available through
>>> the RngGetInfo() callback.
>>> Add a GetRngGuid() for interface to the RngLib.
>>>
>>> b-
>>> The Arm Architecture states the RNDR that the DRBG algorithm should
>>> be compliant with NIST SP800-90A, while not mandating a particular
>>> algorithm, so as to be inclusive of different geographies.
>>> The RngLib can rely on this Arm RNDR instruction. In order to
>>> accurately describe the implementation using the RNDR instruction,
>>> add a EFI_RNG_ALGORITHM_ARM_RNDR GUID [1].
>>>
>>> c-
>>> For the same reason as a/b, add a GUID describing unsafe RNG
>>> algorithms, allowing to accurately describe the BaseRngLibTimerLib.
>>>
>>> d-
>>> Use a/b/c mechanisms/GUIDs to select a safe Rng algorithm in the
>>> Arm implementation of the RngDxe.
>>>
>>> [1] BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4441
>>> [2] BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4151
>>> [3] https://edk2.groups.io/g/devel/message/100806
>>>
>>> Pierre Gondois (8):
>>> MdePkg/ArmTrngLib: Remove ASSERTs in Null implementation
>>> MdePkg/MdePkg.dec: Move PcdCpuRngSupportedAlgorithm to MdePkg
>>> MdePkg/DxeRngLib: Request raw algorithm instead of default
>>> MdePkg/Rng: Add GUIDs to describe Rng algorithms
>>> MdePkg/Rng: Add GetRngGuid() to RngLib
>>> SecurityPkg/RngDxe: Use GetRngGuid() when probing RngLib
>>> SecurityPkg/RngDxe: Select safe default Rng algorithm
>>> SecurityPkg/RngDxe: Simplify Rng algorithm selection for Arm
>>>
>>> MdePkg/Include/Library/RngLib.h | 17 +++++
>>> MdePkg/Include/Protocol/Rng.h | 20 ++++++
>>> .../BaseArmTrngLibNull/BaseArmTrngLibNull.c | 4 --
>>> MdePkg/Library/BaseRngLib/AArch64/Rndr.c | 42 +++++++++++
>>> MdePkg/Library/BaseRngLib/BaseRngLib.inf | 9 +++
>>> MdePkg/Library/BaseRngLib/Rand/RdRand.c | 26 +++++++
>>> .../Library/BaseRngLibNull/BaseRngLibNull.c | 22 ++++++
>>> .../BaseRngLibTimerLib/BaseRngLibTimerLib.inf | 3 +
>>> .../Library/BaseRngLibTimerLib/RngLibTimer.c | 28 ++++++++
>>> MdePkg/Library/DxeRngLib/DxeRngLib.c | 36 +++++++++-
>>> MdePkg/MdePkg.dec | 7 ++
>>> .../RngDxe/AArch64/AArch64Algo.c | 70
>> +++++++++++++++----
>>> .../RandomNumberGenerator/RngDxe/ArmRngDxe.c | 23 +++---
>>> .../RandomNumberGenerator/RngDxe/RngDxe.inf | 5 +-
>>> SecurityPkg/SecurityPkg.dec | 2 -
>>> 15 files changed, 278 insertions(+), 36 deletions(-)
>>>
>
>
prev parent reply other threads:[~2023-06-27 7:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <175D69C984B78702.26836@groups.io>
2023-06-23 9:01 ` [edk2-devel] [PATCH v1 0/8] SecurityPkg/MdePkg: RngLib GUID PierreGondois
2023-06-25 3:13 ` 回复: " gaoliming
2023-06-27 7:19 ` PierreGondois [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0085ba1c-5086-79a9-d2cd-40551cf61355@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox