* Re: [edk2-devel] GetSectionFromAnyFv doesnt find file from FV [not found] <1747FB5DED91B485.22517@groups.io> @ 2023-03-02 11:46 ` Alireza Banejad [not found] ` <1748979F5D46BCF7.9697@groups.io> 1 sibling, 0 replies; 3+ messages in thread From: Alireza Banejad @ 2023-03-02 11:46 UTC (permalink / raw) To: devel, alibanejad1376 [-- Attachment #1: Type: text/plain, Size: 2339 bytes --] Any thoughts? On Tue, Feb 28, 2023 at 3:32 PM Alireza Banejad via groups.io <alibanejad1376=gmail.com@groups.io> wrote: > Hi everyone, > I have this bmp file which I defined in the FV.FVMAIN_COMPACT section of > the OvmfPkgX64.fdf file. when I get the a hexdump on the built firmware > (OVMF.fd) I can see the file inside it. but whenever I call the > the GetSectionFromAnyFv() function from a Application it fails to find the > file. > This is how I defined the file in OvmfX64.fdf: > ____________________________________ > [FV.FVMAIN_COMPACT] > FvNameGuid = 48DB5E17-707C-472D-91CD-1613E7EF51B0 > FvAlignment = 16 > ERASE_POLARITY = 1 > MEMORY_MAPPED = TRUE > STICKY_WRITE = TRUE > LOCK_CAP = TRUE > LOCK_STATUS = TRUE > WRITE_DISABLED_CAP = TRUE > WRITE_ENABLED_CAP = TRUE > WRITE_STATUS = TRUE > WRITE_LOCK_CAP = TRUE > WRITE_LOCK_STATUS = TRUE > READ_DISABLED_CAP = TRUE > READ_ENABLED_CAP = TRUE > READ_STATUS = TRUE > READ_LOCK_CAP = TRUE > READ_LOCK_STATUS = TRUE > > > > > FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 { > SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED > = TRUE { > # > # These firmware volumes will have files placed in them uncompressed, > # and then both firmware volumes will be compressed in a single > # compression operation in order to achieve better overall > compression. > # > SECTION FV_IMAGE = PEIFV > SECTION FV_IMAGE = DXEFV > } > } > FILE FREEFORM = AFDAEAB5-3F81-4E93-8EE3-228434BA283D { > SECTION RAW = OemPkg/FrontPage/Resources/FrontpageLogo.bmp > } > > > > !include FvmainCompactScratchEnd.fdf.inc > __________________________________________ > > and this is how I am using the GetSectionFromAnyFv() function: > Status = GetSectionFromAnyFv ( > FileGuid, > EFI_SECTION_RAW, > 0, > (VOID **)&BMPData, > &BMPDataSize > ); > So there's nothing much to it, yet I still don't know why it fails to find > the file. I also must mention that I checked the GUID being passed to the > function and the GUID of the file, they are both the same. I still don't > know what's going on > > > [-- Attachment #2: Type: text/html, Size: 2872 bytes --] ^ permalink raw reply [flat|nested] 3+ messages in thread
[parent not found: <1748979F5D46BCF7.9697@groups.io>]
* Re: [edk2-devel] GetSectionFromAnyFv doesnt find file from FV [not found] ` <1748979F5D46BCF7.9697@groups.io> @ 2023-03-02 12:15 ` Alireza Banejad 2023-03-10 2:26 ` 回复: " gaoliming 0 siblings, 1 reply; 3+ messages in thread From: Alireza Banejad @ 2023-03-02 12:15 UTC (permalink / raw) To: devel, alibanejad1376 [-- Attachment #1: Type: text/plain, Size: 2700 bytes --] So, I managed to solve this issue by adding my file to the [FV.DXEFV] section. I don't know why my files aren't found when I add them in [FV.FVMAIN_COMPACT] section. On Thu, Mar 2, 2023 at 3:16 PM Alireza Banejad via groups.io <alibanejad1376=gmail.com@groups.io> wrote: > Any thoughts? > > On Tue, Feb 28, 2023 at 3:32 PM Alireza Banejad via groups.io > <alibanejad1376=gmail.com@groups.io> wrote: > >> Hi everyone, >> I have this bmp file which I defined in the FV.FVMAIN_COMPACT section of >> the OvmfPkgX64.fdf file. when I get the a hexdump on the built firmware >> (OVMF.fd) I can see the file inside it. but whenever I call the >> the GetSectionFromAnyFv() function from a Application it fails to find the >> file. >> This is how I defined the file in OvmfX64.fdf: >> ____________________________________ >> [FV.FVMAIN_COMPACT] >> FvNameGuid = 48DB5E17-707C-472D-91CD-1613E7EF51B0 >> FvAlignment = 16 >> ERASE_POLARITY = 1 >> MEMORY_MAPPED = TRUE >> STICKY_WRITE = TRUE >> LOCK_CAP = TRUE >> LOCK_STATUS = TRUE >> WRITE_DISABLED_CAP = TRUE >> WRITE_ENABLED_CAP = TRUE >> WRITE_STATUS = TRUE >> WRITE_LOCK_CAP = TRUE >> WRITE_LOCK_STATUS = TRUE >> READ_DISABLED_CAP = TRUE >> READ_ENABLED_CAP = TRUE >> READ_STATUS = TRUE >> READ_LOCK_CAP = TRUE >> READ_LOCK_STATUS = TRUE >> >> >> >> >> FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 { >> SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF >> PROCESSING_REQUIRED = TRUE { >> # >> # These firmware volumes will have files placed in them uncompressed, >> # and then both firmware volumes will be compressed in a single >> # compression operation in order to achieve better overall >> compression. >> # >> SECTION FV_IMAGE = PEIFV >> SECTION FV_IMAGE = DXEFV >> } >> } >> FILE FREEFORM = AFDAEAB5-3F81-4E93-8EE3-228434BA283D { >> SECTION RAW = OemPkg/FrontPage/Resources/FrontpageLogo.bmp >> } >> >> >> >> !include FvmainCompactScratchEnd.fdf.inc >> __________________________________________ >> >> and this is how I am using the GetSectionFromAnyFv() function: >> Status = GetSectionFromAnyFv ( >> FileGuid, >> EFI_SECTION_RAW, >> 0, >> (VOID **)&BMPData, >> &BMPDataSize >> ); >> So there's nothing much to it, yet I still don't know why it fails to >> find the file. I also must mention that I checked the GUID being passed to >> the function and the GUID of the file, they are both the same. I still >> don't know what's going on >> >> > > [-- Attachment #2: Type: text/html, Size: 3535 bytes --] ^ permalink raw reply [flat|nested] 3+ messages in thread
* 回复: [edk2-devel] GetSectionFromAnyFv doesnt find file from FV 2023-03-02 12:15 ` Alireza Banejad @ 2023-03-10 2:26 ` gaoliming 0 siblings, 0 replies; 3+ messages in thread From: gaoliming @ 2023-03-10 2:26 UTC (permalink / raw) To: devel, alibanejad1376 [-- Attachment #1: Type: text/plain, Size: 2977 bytes --] FVMAIN_COMPACT is not reported to DXE. So, it can’t be found in DXE phase. Thanks Liming 发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表 Alireza Banejad 发送时间: 2023年3月2日 20:16 收件人: devel@edk2.groups.io; alibanejad1376@gmail.com 主题: Re: [edk2-devel] GetSectionFromAnyFv doesnt find file from FV So, I managed to solve this issue by adding my file to the [FV.DXEFV] section. I don't know why my files aren't found when I add them in [FV.FVMAIN_COMPACT] section. On Thu, Mar 2, 2023 at 3:16 PM Alireza Banejad via groups.io <http://groups.io> <alibanejad1376=gmail.com@groups.io <mailto:gmail.com@groups.io> > wrote: Any thoughts? On Tue, Feb 28, 2023 at 3:32 PM Alireza Banejad via groups.io <http://groups.io> <alibanejad1376=gmail.com@groups.io <mailto:gmail.com@groups.io> > wrote: Hi everyone, I have this bmp file which I defined in the FV.FVMAIN_COMPACT section of the OvmfPkgX64.fdf file. when I get the a hexdump on the built firmware (OVMF.fd) I can see the file inside it. but whenever I call the the GetSectionFromAnyFv() function from a Application it fails to find the file. This is how I defined the file in OvmfX64.fdf: ____________________________________ [FV.FVMAIN_COMPACT] FvNameGuid = 48DB5E17-707C-472D-91CD-1613E7EF51B0 FvAlignment = 16 ERASE_POLARITY = 1 MEMORY_MAPPED = TRUE STICKY_WRITE = TRUE LOCK_CAP = TRUE LOCK_STATUS = TRUE WRITE_DISABLED_CAP = TRUE WRITE_ENABLED_CAP = TRUE WRITE_STATUS = TRUE WRITE_LOCK_CAP = TRUE WRITE_LOCK_STATUS = TRUE READ_DISABLED_CAP = TRUE READ_ENABLED_CAP = TRUE READ_STATUS = TRUE READ_LOCK_CAP = TRUE READ_LOCK_STATUS = TRUE FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 { SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # # These firmware volumes will have files placed in them uncompressed, # and then both firmware volumes will be compressed in a single # compression operation in order to achieve better overall compression. # SECTION FV_IMAGE = PEIFV SECTION FV_IMAGE = DXEFV } } FILE FREEFORM = AFDAEAB5-3F81-4E93-8EE3-228434BA283D { SECTION RAW = OemPkg/FrontPage/Resources/FrontpageLogo.bmp } !include FvmainCompactScratchEnd.fdf.inc __________________________________________ and this is how I am using the GetSectionFromAnyFv() function: Status = GetSectionFromAnyFv ( FileGuid, EFI_SECTION_RAW, 0, (VOID **)&BMPData, &BMPDataSize ); So there's nothing much to it, yet I still don't know why it fails to find the file. I also must mention that I checked the GUID being passed to the function and the GUID of the file, they are both the same. I still don't know what's going on [-- Attachment #2: Type: text/html, Size: 8464 bytes --] ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-03-10 2:26 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- [not found] <1747FB5DED91B485.22517@groups.io> 2023-03-02 11:46 ` [edk2-devel] GetSectionFromAnyFv doesnt find file from FV Alireza Banejad [not found] ` <1748979F5D46BCF7.9697@groups.io> 2023-03-02 12:15 ` Alireza Banejad 2023-03-10 2:26 ` 回复: " gaoliming
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox