Sergey: MdeModulePkg FvSimpleFilesystemDxe will map FV as FileSystem. After FvSimpleFilesystemDxe is built into BIOS image, Shell will show FV file system, then you can find the built-in application. MdeModulePkg LoadFileOnFv2 will install LoadFile protocol for the application in FV image. If BIOS includes it, every application will have its boot option. Thanks Liming 发件人: bounce+27952+68233+4905953+8761045@groups.io 代表 Wang, Sunny (HPS SW) 发送时间: 2020年12月3日 17:45 收件人: devel@edk2.groups.io; sergestus@yandex.ru 抄送: Wang, Sunny (HPS SW) 主题: Re: [edk2-devel] Include UEFI application into the BIOS image to be able to run it from UEFI Shell Hi Sergey, I think you can use FvSimpleFilesystemDxe. https://patches.linaro.org/patch/26959/ https://edk2-devel.narkive.com/tPwPAeo1/pacing-uefi-shell-application-in-firmware-volume As for how to include an application into the BIOS image, you can search and check PcdBootManagerMenuFile in EDK II master (https://github.com/tianocore/edk2) to get the details. This is how we add the boot manager menu application into the BIOS image. By the way, if launching it from the boot manager menu is acceptable, you can add your application as a boot option that is similar to what we do for the boot manager menu, but you will need to use LOAD_OPTION_CATEGORY_BOOT instead of LOAD_OPTION_CATEGORY_APP. Regards, Sunny Wang From: > on behalf of "sergestus@yandex.ru " > Reply-To: "devel@edk2.groups.io " >, "sergestus@yandex.ru " > Date: Wednesday, December 2, 2020 at 8:06 PM To: "devel@edk2.groups.io " > Subject: [edk2-devel] Include UEFI application into the BIOS image to be able to run it from UEFI Shell Hi, I created an UEFI application that works fine in UEFI Shell. Users launch the application from USB stick. The application became popular and we want to include it into the BIOS image. The question is how to properly include it into the BIOS image to be able to run it from UEFI Shell without any external storage device? Thank you, Sergey