From: "gaoliming" <gaoliming@byosoft.com.cn>
To: "'Giri Mudusuru'" <girim@apple.com>, <devel@edk2.groups.io>
Cc: "'Michael D Kinney'" <michael.d.kinney@intel.com>,
"'Zhiguang Liu'" <zhiguang.liu@intel.com>,
"'Andrew Fish'" <afish@apple.com>
Subject: 回复: [PATCH] MdePkg Include: Fix typos
Date: Mon, 15 May 2023 09:40:27 +0800 [thread overview]
Message-ID: <013701d986ce$3f5154e0$bdf3fea0$@byosoft.com.cn> (raw)
In-Reply-To: <109a0156b0c2c835c9f94e01e3cbe7386653448e.1683887096.git.girim@apple.com>
Giri:
How do you find these typos? Which tool do you use to scan the code?
Thanks
Liming
> -----邮件原件-----
> 发件人: Giri Mudusuru <girim@apple.com>
> 发送时间: 2023年5月12日 18:25
> 收件人: devel@edk2.groups.io
> 抄送: Giri Mudusuru <girim@apple.com>; Michael D Kinney
> <michael.d.kinney@intel.com>; Liming Gao <gaoliming@byosoft.com.cn>;
> Zhiguang Liu <zhiguang.liu@intel.com>; Andrew Fish <afish@apple.com>
> 主题: [PATCH] MdePkg Include: Fix typos
>
> compatability->compatibility
> EFI_MEDIA_CHNAGED->EFI_MEDIA_CHANGED
> Funtion->Function
> exhausive->exhaustive
> Propery->Property
> StartAdress->StartAddress
> sucessful->successful
> writting->writing
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Cc: Andrew Fish <afish@apple.com>
> Signed-off-by: Giri Mudusuru <girim@apple.com>
> ---
> MdePkg/Include/IndustryStandard/Acpi10.h | 2 +-
> MdePkg/Include/Library/DebugLib.h | 50
> +++++++++----------
> MdePkg/Include/Library/PerformanceLib.h | 2 +-
> MdePkg/Include/Library/PostCodeLib.h | 12 ++---
> MdePkg/Include/Library/ReportStatusCodeLib.h | 26 +++++-----
> MdePkg/Include/Library/S3PciLib.h | 4 +-
> MdePkg/Include/Library/S3PciSegmentLib.h | 4 +-
> MdePkg/Include/Library/UefiLib.h | 2 +-
> MdePkg/Include/Protocol/BlockIo.h | 4 +-
> MdePkg/Include/Protocol/BlockIo2.h | 6 +--
> MdePkg/Include/Protocol/BlockIoCrypto.h | 2 +-
> MdePkg/Include/Protocol/DiskIo.h | 4 +-
> MdePkg/Include/Protocol/DiskIo2.h | 6 +--
> MdePkg/Include/Protocol/Ip4.h | 4 +-
> MdePkg/Include/Protocol/Ip6.h | 4 +-
> .../Protocol/NetworkInterfaceIdentifier.h | 4 +-
> MdePkg/Include/Protocol/Pkcs7Verify.h | 2 +-
> MdePkg/Include/Protocol/RamDisk.h | 2 +-
> MdePkg/Include/Protocol/ScsiIo.h | 2 +-
> MdePkg/Include/Protocol/ScsiPassThru.h | 2 +-
> MdePkg/Include/Protocol/ServiceBinding.h | 2 +-
> MdePkg/Include/Protocol/Shell.h | 2 +-
> MdePkg/Include/Protocol/ShellDynamicCommand.h | 2 +-
> MdePkg/Include/Protocol/Tcp4.h | 4 +-
> MdePkg/Include/Protocol/Tcp6.h | 4 +-
> MdePkg/Include/Protocol/Udp4.h | 4 +-
> MdePkg/Include/Protocol/Udp6.h | 4 +-
> MdePkg/Include/Protocol/UfsDeviceConfig.h | 2 +-
> MdePkg/Include/Protocol/UgaDraw.h | 2 +-
> MdePkg/Include/Protocol/Usb2HostController.h | 2 +-
> MdePkg/Include/Protocol/UsbHostController.h | 2 +-
> 31 files changed, 87 insertions(+), 87 deletions(-)
>
> diff --git a/MdePkg/Include/IndustryStandard/Acpi10.h
> b/MdePkg/Include/IndustryStandard/Acpi10.h
> index 9cc02edb3e..5a47f8a54c 100644
> --- a/MdePkg/Include/IndustryStandard/Acpi10.h
> +++ b/MdePkg/Include/IndustryStandard/Acpi10.h
> @@ -321,7 +321,7 @@ typedef struct {
> #define
> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_MEMOR
> Y (0 << 3)
>
> #define
> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_RESERV
> ED (1 << 3)
>
> #define
> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_ACPI
> (2 << 3)
>
> -#define
> EFI_APCI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_NVS
> (3 << 3)
>
> +#define
> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_NVS
> (3 << 3)
>
> //
>
> // Bit [5] : Memory to I/O Translation, _TTP
>
> //
>
> diff --git a/MdePkg/Include/Library/DebugLib.h
> b/MdePkg/Include/Library/DebugLib.h
> index f0c9f64487..56c9e0c781 100644
> --- a/MdePkg/Include/Library/DebugLib.h
> +++ b/MdePkg/Include/Library/DebugLib.h
> @@ -185,8 +185,8 @@ DebugBPrint (
>
>
> Print a message of the form "ASSERT <FileName>(<LineNumber>):
> <Description>\n"
>
> to the debug output device. If
> DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
>
> - PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise,
if
>
> - DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of
> PcdDebugProperyMask is set then
>
> + PcdDebugPropertyMask is set then CpuBreakpoint() is called. Otherwise,
if
>
> + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of
> PcdDebugPropertyMask is set then
>
> CpuDeadLoop() is called. If neither of these bits are set, then this
> function
>
> returns immediately after the message is printed to the debug output
> device.
>
> DebugAssert() must actively prevent recursion. If DebugAssert() is
called
> while
>
> @@ -234,10 +234,10 @@ DebugClearMemory (
> Returns TRUE if ASSERT() macros are enabled.
>
>
>
> This function returns TRUE if the
> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
>
> - PcdDebugProperyMask is set. Otherwise, FALSE is returned.
>
> + PcdDebugPropertyMask is set. Otherwise, FALSE is returned.
>
>
>
> - @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
> bit of PcdDebugProperyMask is set.
>
> - @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
> bit of PcdDebugProperyMask is clear.
>
> + @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
> bit of PcdDebugPropertyMask is set.
>
> + @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
> bit of PcdDebugPropertyMask is clear.
>
>
>
> **/
>
> BOOLEAN
>
> @@ -250,10 +250,10 @@ DebugAssertEnabled (
> Returns TRUE if DEBUG() macros are enabled.
>
>
>
> This function returns TRUE if the
> DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
>
> - PcdDebugProperyMask is set. Otherwise, FALSE is returned.
>
> + PcdDebugPropertyMask is set. Otherwise, FALSE is returned.
>
>
>
> - @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
> bit of PcdDebugProperyMask is set.
>
> - @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit
> of PcdDebugProperyMask is clear.
>
> + @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
> bit of PcdDebugPropertyMask is set.
>
> + @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit
> of PcdDebugPropertyMask is clear.
>
>
>
> **/
>
> BOOLEAN
>
> @@ -266,10 +266,10 @@ DebugPrintEnabled (
> Returns TRUE if DEBUG_CODE() macros are enabled.
>
>
>
> This function returns TRUE if the
> DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
>
> - PcdDebugProperyMask is set. Otherwise, FALSE is returned.
>
> + PcdDebugPropertyMask is set. Otherwise, FALSE is returned.
>
>
>
> - @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit
> of PcdDebugProperyMask is set.
>
> - @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit
> of PcdDebugProperyMask is clear.
>
> + @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED
> bit of PcdDebugPropertyMask is set.
>
> + @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit
> of PcdDebugPropertyMask is clear.
>
>
>
> **/
>
> BOOLEAN
>
> @@ -282,10 +282,10 @@ DebugCodeEnabled (
> Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.
>
>
>
> This function returns TRUE if the
> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
>
> - PcdDebugProperyMask is set. Otherwise, FALSE is returned.
>
> + PcdDebugPropertyMask is set. Otherwise, FALSE is returned.
>
>
>
> - @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED
> bit of PcdDebugProperyMask is set.
>
> - @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED
> bit of PcdDebugProperyMask is clear.
>
> + @retval TRUE The
> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
> PcdDebugPropertyMask is set.
>
> + @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED
> bit of PcdDebugPropertyMask is clear.
>
>
>
> **/
>
> BOOLEAN
>
> @@ -384,7 +384,7 @@ UnitTestDebugAssert (
> Macro that calls DebugAssert() if an expression evaluates to FALSE.
>
>
>
> If MDEPKG_NDEBUG is not defined and the
> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
>
> - bit of PcdDebugProperyMask is set, then this macro evaluates the
Boolean
>
> + bit of PcdDebugPropertyMask is set, then this macro evaluates the
> Boolean
>
> expression specified by Expression. If Expression evaluates to FALSE,
> then
>
> DebugAssert() is called passing in the source filename, source line
number,
>
> and Expression.
>
> @@ -410,7 +410,7 @@ UnitTestDebugAssert (
> Macro that calls DebugPrint().
>
>
>
> If MDEPKG_NDEBUG is not defined and the
> DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
>
> - bit of PcdDebugProperyMask is set, then this macro passes Expression to
>
> + bit of PcdDebugPropertyMask is set, then this macro passes Expression
to
>
> DebugPrint().
>
>
>
> @param Expression Expression containing an error level, a format
> string,
>
> @@ -433,7 +433,7 @@ UnitTestDebugAssert (
> Macro that calls DebugAssert() if an EFI_STATUS evaluates to an error
> code.
>
>
>
> If MDEPKG_NDEBUG is not defined and the
> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
>
> - bit of PcdDebugProperyMask is set, then this macro evaluates the
> EFI_STATUS
>
> + bit of PcdDebugPropertyMask is set, then this macro evaluates the
> EFI_STATUS
>
> value specified by StatusParameter. If StatusParameter is an error
code,
>
> then DebugAssert() is called passing in the source filename, source
line
>
> number, and StatusParameter.
>
> @@ -459,7 +459,7 @@ UnitTestDebugAssert (
> Macro that calls DebugAssert() if a RETURN_STATUS evaluates to an error
> code.
>
>
>
> If MDEPKG_NDEBUG is not defined and the
> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
>
> - bit of PcdDebugProperyMask is set, then this macro evaluates the
>
> + bit of PcdDebugPropertyMask is set, then this macro evaluates the
>
> RETURN_STATUS value specified by StatusParameter. If
> StatusParameter is an
>
> error code, then DebugAssert() is called passing in the source
filename,
>
> source line number, and StatusParameter.
>
> @@ -487,7 +487,7 @@ UnitTestDebugAssert (
> handle database.
>
>
>
> If MDEPKG_NDEBUG is defined or the
> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit
>
> - of PcdDebugProperyMask is clear, then return.
>
> + of PcdDebugPropertyMask is clear, then return.
>
>
>
> If Handle is NULL, then a check is made to see if the protocol
specified by
> Guid
>
> is present on any handle in the handle database. If Handle is not
NULL,
> then
>
> @@ -528,7 +528,7 @@ UnitTestDebugAssert (
> /**
>
> Macro that marks the beginning of debug source code.
>
>
>
> - If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
> PcdDebugProperyMask is set,
>
> + If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
> PcdDebugPropertyMask is set,
>
> then this macro marks the beginning of source code that is included in
a
> module.
>
> Otherwise, the source lines between DEBUG_CODE_BEGIN() and
> DEBUG_CODE_END()
>
> are not included in a module.
>
> @@ -539,7 +539,7 @@ UnitTestDebugAssert (
> /**
>
> The macro that marks the end of debug source code.
>
>
>
> - If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
> PcdDebugProperyMask is set,
>
> + If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
> PcdDebugPropertyMask is set,
>
> then this macro marks the end of source code that is included in a
module.
>
> Otherwise, the source lines between DEBUG_CODE_BEGIN() and
> DEBUG_CODE_END()
>
> are not included in a module.
>
> @@ -550,7 +550,7 @@ UnitTestDebugAssert (
> /**
>
> The macro that declares a section of debug source code.
>
>
>
> - If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
> PcdDebugProperyMask is set,
>
> + If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
> PcdDebugPropertyMask is set,
>
> then the source code specified by Expression is included in a module.
>
> Otherwise, the source specified by Expression is not included in a
module.
>
>
>
> @@ -563,7 +563,7 @@ UnitTestDebugAssert (
> /**
>
> The macro that calls DebugClearMemory() to clear a buffer to a default
> value.
>
>
>
> - If the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
> PcdDebugProperyMask is set,
>
> + If the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
> PcdDebugPropertyMask is set,
>
> then this macro calls DebugClearMemory() passing in Address and Length.
>
>
>
> @param Address The pointer to a buffer.
>
> @@ -586,13 +586,13 @@ UnitTestDebugAssert (
> public data structure to retrieve a pointer to the private data
structure.
>
>
>
> If MDEPKG_NDEBUG is defined or the
> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit
>
> - of PcdDebugProperyMask is clear, then this macro computes the offset,
in
> bytes,
>
> + of PcdDebugPropertyMask is clear, then this macro computes the offset,
in
> bytes,
>
> of the field specified by Field from the beginning of the data
structure
> specified
>
> by TYPE. This offset is subtracted from Record, and is used to return
a
> pointer
>
> to a data structure of the type specified by TYPE.
>
>
>
> If MDEPKG_NDEBUG is not defined and the
> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit
>
> - of PcdDebugProperyMask is set, then this macro computes the offset, in
> bytes,
>
> + of PcdDebugPropertyMask is set, then this macro computes the offset, in
> bytes,
>
> of field specified by Field from the beginning of the data structure
> specified
>
> by TYPE. This offset is subtracted from Record, and is used to compute
a
> pointer
>
> to a data structure of the type specified by TYPE. The Signature field
of
> the
>
> diff --git a/MdePkg/Include/Library/PerformanceLib.h
> b/MdePkg/Include/Library/PerformanceLib.h
> index d0f2dfb070..24e60d33d1 100644
> --- a/MdePkg/Include/Library/PerformanceLib.h
> +++ b/MdePkg/Include/Library/PerformanceLib.h
> @@ -10,7 +10,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> #define __PERFORMANCE_LIB_H__
>
>
>
> ///
>
> -/// Performance library propery mask bits
>
> +/// Performance library property mask bits
>
> ///
>
> #define PERFORMANCE_LIBRARY_PROPERTY_MEASUREMENT_ENABLED
> 0x00000001
>
>
>
> diff --git a/MdePkg/Include/Library/PostCodeLib.h
> b/MdePkg/Include/Library/PostCodeLib.h
> index 80628d7999..5fd6ab3b36 100644
> --- a/MdePkg/Include/Library/PostCodeLib.h
> +++ b/MdePkg/Include/Library/PostCodeLib.h
> @@ -74,9 +74,9 @@ PostCodeWithDescription (
> bit of PcdPostCodePropertyMask is set. Otherwise FALSE is returned.
>
>
>
> @retval TRUE The POST_CODE_PROPERTY_POST_CODE_ENABLED
> bit of
>
> - PcdPostCodeProperyMask is set.
>
> + PcdPostCodePropertyMask is set.
>
> @retval FALSE The POST_CODE_PROPERTY_POST_CODE_ENABLED
> bit of
>
> - PcdPostCodeProperyMask is clear.
>
> + PcdPostCodePropertyMask is clear.
>
>
>
> **/
>
> BOOLEAN
>
> @@ -92,9 +92,9 @@ PostCodeEnabled (
> bit of PcdPostCodePropertyMask is set. Otherwise FALSE is returned.
>
>
>
> @retval TRUE The
> POST_CODE_PROPERTY_POST_CODE_DESCRIPTION_ENABLED bit of
>
> - PcdPostCodeProperyMask is set.
>
> + PcdPostCodePropertyMask is set.
>
> @retval FALSE The
> POST_CODE_PROPERTY_POST_CODE_DESCRIPTION_ENABLED bit of
>
> - PcdPostCodeProperyMask is clear.
>
> + PcdPostCodePropertyMask is clear.
>
>
>
> **/
>
> BOOLEAN
>
> @@ -106,7 +106,7 @@ PostCodeDescriptionEnabled (
> /**
>
> Sends a 32-bit value to a POST card.
>
>
>
> - If POST codes are enabled in PcdPostCodeProperyMask, then call
> PostCode()
>
> + If POST codes are enabled in PcdPostCodePropertyMask, then call
> PostCode()
>
> passing in Value. Value is returned.
>
>
>
> @param Value The 32-bit value to write to the POST card.
>
> @@ -120,7 +120,7 @@ PostCodeDescriptionEnabled (
> Sends a 32-bit value to a POST and associated ASCII string.
>
>
>
> If POST codes and POST code descriptions are enabled in
>
> - PcdPostCodeProperyMask, then call PostCodeWithDescription() passing in
>
> + PcdPostCodePropertyMask, then call PostCodeWithDescription() passing
> in
>
> Value and Description. If only POST codes are enabled, then call
> PostCode()
>
> passing in Value. Value is returned.
>
>
>
> diff --git a/MdePkg/Include/Library/ReportStatusCodeLib.h
> b/MdePkg/Include/Library/ReportStatusCodeLib.h
> index 3763e69928..3268e07aa6 100644
> --- a/MdePkg/Include/Library/ReportStatusCodeLib.h
> +++ b/MdePkg/Include/Library/ReportStatusCodeLib.h
> @@ -298,12 +298,12 @@ ReportStatusCodeEx (
> Returns TRUE if status codes of type EFI_PROGRESS_CODE are enabled
>
>
>
> This function returns TRUE if the
> REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED
>
> - bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is
> returned.
>
> + bit of PcdReportStatusCodePropertyMask is set. Otherwise FALSE is
> returned.
>
>
>
> @retval TRUE The
> REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
>
> - PcdReportStatusCodeProperyMask is set.
>
> + PcdReportStatusCodePropertyMask is set.
>
> @retval FALSE The
> REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
>
> - PcdReportStatusCodeProperyMask is clear.
>
> + PcdReportStatusCodePropertyMask is clear.
>
>
>
> **/
>
> BOOLEAN
>
> @@ -316,12 +316,12 @@ ReportProgressCodeEnabled (
> Returns TRUE if status codes of type EFI_ERROR_CODE are enabled
>
>
>
> This function returns TRUE if the
> REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED
>
> - bit of PcdReportStatusCodeProperyMask is set. Otherwise, FALSE is
> returned.
>
> + bit of PcdReportStatusCodePropertyMask is set. Otherwise, FALSE is
> returned.
>
>
>
> @retval TRUE The
> REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
>
> - PcdReportStatusCodeProperyMask is set.
>
> + PcdReportStatusCodePropertyMask is set.
>
> @retval FALSE The
> REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
>
> - PcdReportStatusCodeProperyMask is clear.
>
> + PcdReportStatusCodePropertyMask is clear.
>
>
>
> **/
>
> BOOLEAN
>
> @@ -334,12 +334,12 @@ ReportErrorCodeEnabled (
> Returns TRUE if status codes of type EFI_DEBUG_CODE are enabled
>
>
>
> This function returns TRUE if the
> REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED
>
> - bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is
> returned.
>
> + bit of PcdReportStatusCodePropertyMask is set. Otherwise FALSE is
> returned.
>
>
>
> @retval TRUE The
> REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
>
> - PcdReportStatusCodeProperyMask is set.
>
> + PcdReportStatusCodePropertyMask is set.
>
> @retval FALSE The
> REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
>
> - PcdReportStatusCodeProperyMask is clear.
>
> + PcdReportStatusCodePropertyMask is clear.
>
>
>
> **/
>
> BOOLEAN
>
> @@ -352,7 +352,7 @@ ReportDebugCodeEnabled (
> Reports a status code with minimal parameters if the status code type
is
> enabled.
>
>
>
> If the status code type specified by Type is enabled in
>
> - PcdReportStatusCodeProperyMask, then call ReportStatusCode() passing in
> Type
>
> + PcdReportStatusCodePropertyMask, then call ReportStatusCode() passing
> in Type
>
> and Value.
>
>
>
> @param Type The status code type.
>
> @@ -377,7 +377,7 @@ ReportDebugCodeEnabled (
> status code type is enabled.
>
>
>
> If the status code type specified by Type is enabled in
>
> - PcdReportStatusCodeProperyMask, then call
> ReportStatusCodeWithDevicePath()
>
> + PcdReportStatusCodePropertyMask, then call
> ReportStatusCodeWithDevicePath()
>
> passing in Type, Value, and DevicePath.
>
>
>
> @param Type The status code type.
>
> @@ -407,7 +407,7 @@ ReportDebugCodeEnabled (
> is enabled.
>
>
>
> If the status code type specified by Type is enabled in
>
> - PcdReportStatusCodeProperyMask, then call
> ReportStatusCodeWithExtendedData()
>
> + PcdReportStatusCodePropertyMask, then call
> ReportStatusCodeWithExtendedData()
>
> passing in Type, Value, ExtendedData, and ExtendedDataSize.
>
>
>
> @param Type The status code type.
>
> @@ -438,7 +438,7 @@ ReportDebugCodeEnabled (
> Reports a status code specifying all parameters if the status code type
is
> enabled.
>
>
>
> If the status code type specified by Type is enabled in
>
> - PcdReportStatusCodeProperyMask, then call ReportStatusCodeEx() passing
> in Type,
>
> + PcdReportStatusCodePropertyMask, then call ReportStatusCodeEx()
> passing in Type,
>
> Value, Instance, CallerId, ExtendedDataGuid, ExtendedData, and
> ExtendedDataSize.
>
>
>
> @param Type The status code type.
>
> diff --git a/MdePkg/Include/Library/S3PciLib.h
> b/MdePkg/Include/Library/S3PciLib.h
> index 1479859b84..185844d0c7 100644
> --- a/MdePkg/Include/Library/S3PciLib.h
> +++ b/MdePkg/Include/Library/S3PciLib.h
> @@ -985,7 +985,7 @@ S3PciBitFieldAndThenOr32 (
> Size into the buffer specified by Buffer. This function only allows the
PCI
>
> configuration registers from a single PCI function to be read. Size is
>
> returned. When possible 32-bit PCI configuration read cycles are used
to
> read
>
> - from StartAdress to StartAddress + Size. Due to alignment restrictions,
> 8-bit
>
> + from StartAddress to StartAddress + Size. Due to alignment
restrictions,
> 8-bit
>
> and 16-bit PCI configuration read cycles may be used at the beginning
and
> the
>
> end of the range.
>
>
>
> @@ -1018,7 +1018,7 @@ S3PciReadBuffer (
> Size from the buffer specified by Buffer. This function only allows the
PCI
>
> configuration registers from a single PCI function to be written. Size
is
>
> returned. When possible 32-bit PCI configuration write cycles are used
to
>
> - write from StartAdress to StartAddress + Size. Due to alignment
> restrictions,
>
> + write from StartAddress to StartAddress + Size. Due to alignment
> restrictions,
>
> 8-bit and 16-bit PCI configuration write cycles may be used at the
> beginning
>
> and the end of the range.
>
>
>
> diff --git a/MdePkg/Include/Library/S3PciSegmentLib.h
> b/MdePkg/Include/Library/S3PciSegmentLib.h
> index 5067d4fcbb..21863c2597 100644
> --- a/MdePkg/Include/Library/S3PciSegmentLib.h
> +++ b/MdePkg/Include/Library/S3PciSegmentLib.h
> @@ -970,7 +970,7 @@ S3PciSegmentBitFieldAndThenOr32 (
> Size into the buffer specified by Buffer. This function only allows the
PCI
>
> configuration registers from a single PCI function to be read. Size is
>
> returned. When possible 32-bit PCI configuration read cycles are used
to
> read
>
> - from StartAdress to StartAddress + Size. Due to alignment restrictions,
> 8-bit
>
> + from StartAddress to StartAddress + Size. Due to alignment
restrictions,
> 8-bit
>
> and 16-bit PCI configuration read cycles may be used at the beginning
and
> the
>
> end of the range.
>
>
>
> @@ -1003,7 +1003,7 @@ S3PciSegmentReadBuffer (
> Size from the buffer specified by Buffer. This function only allows the
PCI
>
> configuration registers from a single PCI function to be written. Size
is
>
> returned. When possible 32-bit PCI configuration write cycles are used
to
>
> - write from StartAdress to StartAddress + Size. Due to alignment
> restrictions,
>
> + write from StartAddress to StartAddress + Size. Due to alignment
> restrictions,
>
> 8-bit and 16-bit PCI configuration write cycles may be used at the
> beginning
>
> and the end of the range.
>
>
>
> diff --git a/MdePkg/Include/Library/UefiLib.h
> b/MdePkg/Include/Library/UefiLib.h
> index be7da7fdf7..450d766513 100644
> --- a/MdePkg/Include/Library/UefiLib.h
> +++ b/MdePkg/Include/Library/UefiLib.h
> @@ -317,7 +317,7 @@ EfiInitializeLock (
> Macro that calls DebugAssert() if an EFI_LOCK structure is not in the
> locked state.
>
>
>
> If MDEPKG_NDEBUG is not defined and the
> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
>
> - bit of PcdDebugProperyMask is set, then this macro evaluates the
> EFI_LOCK
>
> + bit of PcdDebugPropertyMask is set, then this macro evaluates the
> EFI_LOCK
>
> structure specified by Lock. If Lock is not in the locked state, then
>
> DebugAssert() is called passing in the source filename, source line
number,
>
> and Lock.
>
> diff --git a/MdePkg/Include/Protocol/BlockIo.h
> b/MdePkg/Include/Protocol/BlockIo.h
> index ac9adf7a9c..414bf98b52 100644
> --- a/MdePkg/Include/Protocol/BlockIo.h
> +++ b/MdePkg/Include/Protocol/BlockIo.h
> @@ -90,7 +90,7 @@ EFI_STATUS
> @retval EFI_WRITE_PROTECTED The device can not be written to.
>
> @retval EFI_DEVICE_ERROR The device reported an error while
> performing the write.
>
> @retval EFI_NO_MEDIA There is no media in the device.
>
> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched the
> current device.
>
> + @retval EFI_MEDIA_CHANGED The MediaId does not matched the
> current device.
>
> @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the
> block size of the device.
>
> @retval EFI_INVALID_PARAMETER The write request contains LBAs that
> are not valid,
>
> or the buffer is not on proper
> alignment.
>
> @@ -112,7 +112,7 @@ EFI_STATUS
> @param This Indicates a pointer to the calling context.
>
>
>
> @retval EFI_SUCCESS All outstanding data was written to the
> device
>
> - @retval EFI_DEVICE_ERROR The device reported an error while writting
> back the data
>
> + @retval EFI_DEVICE_ERROR The device reported an error while writing
> back the data
>
> @retval EFI_NO_MEDIA There is no media in the device.
>
>
>
> **/
>
> diff --git a/MdePkg/Include/Protocol/BlockIo2.h
> b/MdePkg/Include/Protocol/BlockIo2.h
> index d25f51f733..0502554205 100644
> --- a/MdePkg/Include/Protocol/BlockIo2.h
> +++ b/MdePkg/Include/Protocol/BlockIo2.h
> @@ -44,7 +44,7 @@ typedef struct {
>
>
> @param[in] This Indicates a pointer to the calling
> context.
>
> @param[in] ExtendedVerification Indicates that the driver may perform
> a more
>
> - exhausive verification operation
> of the device
>
> + exhaustive verification operation
> of the device
>
> during reset.
>
>
>
> @retval EFI_SUCCESS The device was reset.
>
> @@ -125,7 +125,7 @@ EFI_STATUS
> the Event is NULL.
>
> @retval EFI_WRITE_PROTECTED The device can not be written to.
>
> @retval EFI_NO_MEDIA There is no media in the device.
>
> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched the
> current device.
>
> + @retval EFI_MEDIA_CHANGED The MediaId does not matched the
> current device.
>
> @retval EFI_DEVICE_ERROR The device reported an error while
> performing the write.
>
> @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the
> block size of the device.
>
> @retval EFI_INVALID_PARAMETER The write request contains LBAs that
> are not valid,
>
> @@ -158,7 +158,7 @@ EFI_STATUS
> @retval EFI_SUCCESS The flush request was queued if Event
> is not NULL.
>
> All outstanding data was written
> correctly to the
>
> device if the Event is NULL.
>
> - @retval EFI_DEVICE_ERROR The device reported an error while
> writting back
>
> + @retval EFI_DEVICE_ERROR The device reported an error while
> writing back
>
> the data.
>
> @retval EFI_WRITE_PROTECTED The device cannot be written to.
>
> @retval EFI_NO_MEDIA There is no media in the device.
>
> diff --git a/MdePkg/Include/Protocol/BlockIoCrypto.h
> b/MdePkg/Include/Protocol/BlockIoCrypto.h
> index bcc0ed40be..f0af6a8bb0 100644
> --- a/MdePkg/Include/Protocol/BlockIoCrypto.h
> +++ b/MdePkg/Include/Protocol/BlockIoCrypto.h
> @@ -168,7 +168,7 @@ typedef struct {
> up to the platform firmware or driver to implement.
>
>
>
> @param[in] This Pointer to the
> EFI_BLOCK_IO_CRYPTO_PROTOCOL instance.
>
> - @param[in] ExtendedVerification Indicates that the driver may perform
> a more exhausive
>
> + @param[in] ExtendedVerification Indicates that the driver may perform
> a more exhaustive
>
> verification operation of the
> device during reset.
>
>
>
> @retval EFI_SUCCESS The block device was reset.
>
> diff --git a/MdePkg/Include/Protocol/DiskIo.h
> b/MdePkg/Include/Protocol/DiskIo.h
> index eaa5cbcea2..2c86530a5c 100644
> --- a/MdePkg/Include/Protocol/DiskIo.h
> +++ b/MdePkg/Include/Protocol/DiskIo.h
> @@ -42,7 +42,7 @@ typedef EFI_DISK_IO_PROTOCOL EFI_DISK_IO;
> @retval EFI_SUCCESS The data was read correctly from the
> device.
>
> @retval EFI_DEVICE_ERROR The device reported an error while
> performing the read.
>
> @retval EFI_NO_MEDIA There is no media in the device.
>
> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched the
> current device.
>
> + @retval EFI_MEDIA_CHANGED The MediaId does not matched the
> current device.
>
> @retval EFI_INVALID_PARAMETER The read request contains device
> addresses that are not
>
> valid for the device.
>
>
>
> @@ -70,7 +70,7 @@ EFI_STATUS
> @retval EFI_WRITE_PROTECTED The device can not be written to.
>
> @retval EFI_DEVICE_ERROR The device reported an error while
> performing the write.
>
> @retval EFI_NO_MEDIA There is no media in the device.
>
> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched the
> current device.
>
> + @retval EFI_MEDIA_CHANGED The MediaId does not matched the
> current device.
>
> @retval EFI_INVALID_PARAMETER The write request contains device
> addresses that are not
>
> valid for the device.
>
>
>
> diff --git a/MdePkg/Include/Protocol/DiskIo2.h
> b/MdePkg/Include/Protocol/DiskIo2.h
> index c989bb5f45..58c972e48e 100644
> --- a/MdePkg/Include/Protocol/DiskIo2.h
> +++ b/MdePkg/Include/Protocol/DiskIo2.h
> @@ -70,7 +70,7 @@ EFI_STATUS
>
> Event will be signaled upon completion.
>
> @retval EFI_DEVICE_ERROR The device reported an error while
> performing the write.
>
> @retval EFI_NO_MEDIA There is no medium in the device.
>
> - @retval EFI_MEDIA_CHNAGED The MediaId is not for the current
> medium.
>
> + @retval EFI_MEDIA_CHANGED The MediaId is not for the current
> medium.
>
> @retval EFI_INVALID_PARAMETER The read request contains device
> addresses that are not valid for the device.
>
> @retval EFI_OUT_OF_RESOURCES The request could not be completed
> due to a lack of resources.
>
>
>
> @@ -103,7 +103,7 @@ EFI_STATUS
> @retval EFI_WRITE_PROTECTED The device cannot be written to.
>
> @retval EFI_DEVICE_ERROR The device reported an error while
> performing the write operation.
>
> @retval EFI_NO_MEDIA There is no medium in the device.
>
> - @retval EFI_MEDIA_CHNAGED The MediaId is not for the current
> medium.
>
> + @retval EFI_MEDIA_CHANGED The MediaId is not for the current
> medium.
>
> @retval EFI_INVALID_PARAMETER The write request contains device
> addresses that are not valid for the device.
>
> @retval EFI_OUT_OF_RESOURCES The request could not be completed
> due to a lack of resources.
>
>
>
> @@ -133,7 +133,7 @@ EFI_STATUS
> @retval EFI_WRITE_PROTECTED The device cannot be written to.
>
> @retval EFI_DEVICE_ERROR The device reported an error while
> performing the write operation.
>
> @retval EFI_NO_MEDIA There is no medium in the device.
>
> - @retval EFI_MEDIA_CHNAGED The MediaId is not for the current
> medium.
>
> + @retval EFI_MEDIA_CHANGED The MediaId is not for the current
> medium.
>
> @retval EFI_OUT_OF_RESOURCES The request could not be completed
> due to a lack of resources.
>
> **/
>
> typedef
>
> diff --git a/MdePkg/Include/Protocol/Ip4.h b/MdePkg/Include/Protocol/Ip4.h
> index 4c0ed6fd3c..57a25122ba 100644
> --- a/MdePkg/Include/Protocol/Ip4.h
> +++ b/MdePkg/Include/Protocol/Ip4.h
> @@ -37,7 +37,7 @@ typedef struct _EFI_IP4_PROTOCOL
> EFI_IP4_PROTOCOL;
>
>
> ///
>
> /// EFI_IP4_ADDRESS_PAIR is deprecated in the UEFI 2.4B and should not be
> used any more.
>
> -/// The definition in here is only present to provide backwards
compatability.
>
> +/// The definition in here is only present to provide backwards
compatibility.
>
> ///
>
> typedef struct {
>
> EFI_HANDLE InstanceHandle;
>
> @@ -47,7 +47,7 @@ typedef struct {
>
>
> ///
>
> /// EFI_IP4_VARIABLE_DATA is deprecated in the UEFI 2.4B and should not
> be used any more.
>
> -/// The definition in here is only present to provide backwards
compatability.
>
> +/// The definition in here is only present to provide backwards
compatibility.
>
> ///
>
> typedef struct {
>
> EFI_HANDLE DriverHandle;
>
> diff --git a/MdePkg/Include/Protocol/Ip6.h b/MdePkg/Include/Protocol/Ip6.h
> index 4aff36f0a1..269ae0d6b0 100644
> --- a/MdePkg/Include/Protocol/Ip6.h
> +++ b/MdePkg/Include/Protocol/Ip6.h
> @@ -37,7 +37,7 @@ typedef struct _EFI_IP6_PROTOCOL
> EFI_IP6_PROTOCOL;
>
>
> ///
>
> /// EFI_IP6_ADDRESS_PAIR is deprecated in the UEFI 2.4B and should not be
> used any more.
>
> -/// The definition in here is only present to provide backwards
compatability.
>
> +/// The definition in here is only present to provide backwards
compatibility.
>
> ///
>
> typedef struct {
>
> ///
>
> @@ -56,7 +56,7 @@ typedef struct {
>
>
> ///
>
> /// EFI_IP6_VARIABLE_DATA is deprecated in the UEFI 2.4B and should not
> be used any more.
>
> -/// The definition in here is only present to provide backwards
compatability.
>
> +/// The definition in here is only present to provide backwards
compatibility.
>
> ///
>
> typedef struct {
>
> ///
>
> diff --git a/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h
> b/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h
> index 78acb4ddae..9649b819ba 100644
> --- a/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h
> +++ b/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h
> @@ -39,7 +39,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> #define EFI_NETWORK_INTERFACE_IDENTIFIER_INTERFACE_REVISION
> EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL_REVISION
>
>
>
> ///
>
> -/// Forward reference for pure ANSI compatability.
>
> +/// Forward reference for pure ANSI compatibility.
>
> ///
>
> typedef struct _EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL
> EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL;
>
>
>
> @@ -82,7 +82,7 @@ typedef enum {
> } EFI_NETWORK_INTERFACE_TYPE;
>
>
>
> ///
>
> -/// Forward reference for pure ANSI compatability.
>
> +/// Forward reference for pure ANSI compatibility.
>
> ///
>
> typedef struct undiconfig_table UNDI_CONFIG_TABLE;
>
>
>
> diff --git a/MdePkg/Include/Protocol/Pkcs7Verify.h
> b/MdePkg/Include/Protocol/Pkcs7Verify.h
> index 068eda8b45..93b6c2f9b7 100644
> --- a/MdePkg/Include/Protocol/Pkcs7Verify.h
> +++ b/MdePkg/Include/Protocol/Pkcs7Verify.h
> @@ -28,7 +28,7 @@ typedef struct _EFI_PKCS7_VERIFY_PROTOCOL
> EFI_PKCS7_VERIFY_PROTOCOL;
>
>
> /**
>
> Processes a buffer containing binary DER-encoded PKCS7 signature.
>
> - The signed data content may be embedded within the buffer or separated.
> Funtion
>
> + The signed data content may be embedded within the buffer or separated.
> Function
>
> verifies the signature of the content is valid and signing certificate
was not
>
> revoked and is contained within a list of trusted signers.
>
>
>
> diff --git a/MdePkg/Include/Protocol/RamDisk.h
> b/MdePkg/Include/Protocol/RamDisk.h
> index 2ab5a5e5e1..8808efdf66 100644
> --- a/MdePkg/Include/Protocol/RamDisk.h
> +++ b/MdePkg/Include/Protocol/RamDisk.h
> @@ -19,7 +19,7 @@
> { 0xab38a0df, 0x6873, 0x44a9, { 0x87, 0xe6, 0xd4, 0xeb, 0x56, 0x14,
0x84,
> 0x49 }};
>
>
>
> //
>
> -// Forward reference for pure ANSI compatability
>
> +// Forward reference for pure ANSI compatibility
>
> //
>
> typedef struct _EFI_RAM_DISK_PROTOCOL EFI_RAM_DISK_PROTOCOL;
>
>
>
> diff --git a/MdePkg/Include/Protocol/ScsiIo.h
> b/MdePkg/Include/Protocol/ScsiIo.h
> index 7ebfd9a652..7485e52b3f 100644
> --- a/MdePkg/Include/Protocol/ScsiIo.h
> +++ b/MdePkg/Include/Protocol/ScsiIo.h
> @@ -18,7 +18,7 @@
> }
>
>
>
> ///
>
> -/// Forward reference for pure ANSI compatability
>
> +/// Forward reference for pure ANSI compatibility
>
> ///
>
> typedef struct _EFI_SCSI_IO_PROTOCOL EFI_SCSI_IO_PROTOCOL;
>
>
>
> diff --git a/MdePkg/Include/Protocol/ScsiPassThru.h
> b/MdePkg/Include/Protocol/ScsiPassThru.h
> index c87fb97aee..a4c6a6be3d 100644
> --- a/MdePkg/Include/Protocol/ScsiPassThru.h
> +++ b/MdePkg/Include/Protocol/ScsiPassThru.h
> @@ -22,7 +22,7 @@
> }
>
>
>
> ///
>
> -/// Forward reference for pure ANSI compatability
>
> +/// Forward reference for pure ANSI compatibility
>
> ///
>
> typedef struct _EFI_SCSI_PASS_THRU_PROTOCOL
> EFI_SCSI_PASS_THRU_PROTOCOL;
>
>
>
> diff --git a/MdePkg/Include/Protocol/ServiceBinding.h
> b/MdePkg/Include/Protocol/ServiceBinding.h
> index b39af73a95..3fb9ed6e98 100644
> --- a/MdePkg/Include/Protocol/ServiceBinding.h
> +++ b/MdePkg/Include/Protocol/ServiceBinding.h
> @@ -14,7 +14,7 @@
> #define __EFI_SERVICE_BINDING_H__
>
>
>
> ///
>
> -/// Forward reference for pure ANSI compatability
>
> +/// Forward reference for pure ANSI compatibility
>
> ///
>
> typedef struct _EFI_SERVICE_BINDING_PROTOCOL
> EFI_SERVICE_BINDING_PROTOCOL;
>
>
>
> diff --git a/MdePkg/Include/Protocol/Shell.h
> b/MdePkg/Include/Protocol/Shell.h
> index 5efee49e19..d65c87a735 100644
> --- a/MdePkg/Include/Protocol/Shell.h
> +++ b/MdePkg/Include/Protocol/Shell.h
> @@ -180,7 +180,7 @@ BOOLEAN
>
>
> @param[in] FileHandle The file handle to be closed.
>
>
>
> - @retval EFI_SUCCESS The file closed sucessfully.
>
> + @retval EFI_SUCCESS The file closed successfully.
>
> **/
>
> typedef
>
> EFI_STATUS
>
> diff --git a/MdePkg/Include/Protocol/ShellDynamicCommand.h
> b/MdePkg/Include/Protocol/ShellDynamicCommand.h
> index f1bb59d700..c7756f9a81 100644
> --- a/MdePkg/Include/Protocol/ShellDynamicCommand.h
> +++ b/MdePkg/Include/Protocol/ShellDynamicCommand.h
> @@ -34,7 +34,7 @@ typedef struct
> _EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL
> EFI_SHELL_DYNAMIC_COMMAND_PRO
> @param[in] Shell The instance of the shell protocol
> used in the context
>
> of processing this command.
>
>
>
> - @return EFI_SUCCESS the operation was sucessful
>
> + @return EFI_SUCCESS the operation was successful
>
> @return other the operation failed.
>
> **/
>
> typedef
>
> diff --git a/MdePkg/Include/Protocol/Tcp4.h
> b/MdePkg/Include/Protocol/Tcp4.h
> index e81c2e71f6..cf88739687 100644
> --- a/MdePkg/Include/Protocol/Tcp4.h
> +++ b/MdePkg/Include/Protocol/Tcp4.h
> @@ -31,7 +31,7 @@ typedef struct _EFI_TCP4_PROTOCOL
> EFI_TCP4_PROTOCOL;
>
>
> ///
>
> /// EFI_TCP4_SERVICE_POINT is deprecated in the UEFI 2.4B and should not
> be used any more.
>
> -/// The definition in here is only present to provide backwards
compatability.
>
> +/// The definition in here is only present to provide backwards
compatibility.
>
> ///
>
> typedef struct {
>
> EFI_HANDLE InstanceHandle;
>
> @@ -43,7 +43,7 @@ typedef struct {
>
>
> ///
>
> /// EFI_TCP4_VARIABLE_DATA is deprecated in the UEFI 2.4B and should not
> be used any more.
>
> -/// The definition in here is only present to provide backwards
compatability.
>
> +/// The definition in here is only present to provide backwards
compatibility.
>
> ///
>
> typedef struct {
>
> EFI_HANDLE DriverHandle;
>
> diff --git a/MdePkg/Include/Protocol/Tcp6.h
> b/MdePkg/Include/Protocol/Tcp6.h
> index a8787dd3af..1391978a35 100644
> --- a/MdePkg/Include/Protocol/Tcp6.h
> +++ b/MdePkg/Include/Protocol/Tcp6.h
> @@ -32,7 +32,7 @@ typedef struct _EFI_TCP6_PROTOCOL
> EFI_TCP6_PROTOCOL;
>
>
> ///
>
> /// EFI_TCP6_SERVICE_POINT is deprecated in the UEFI 2.4B and should not
> be used any more.
>
> -/// The definition in here is only present to provide backwards
compatability.
>
> +/// The definition in here is only present to provide backwards
compatibility.
>
> ///
>
> typedef struct {
>
> ///
>
> @@ -64,7 +64,7 @@ typedef struct {
>
>
> ///
>
> /// EFI_TCP6_VARIABLE_DATA is deprecated in the UEFI 2.4B and should not
> be used any more.
>
> -/// The definition in here is only present to provide backwards
compatability.
>
> +/// The definition in here is only present to provide backwards
compatibility.
>
> ///
>
> typedef struct {
>
> EFI_HANDLE DriverHandle; ///< The handle of the
> driver that creates this entry.
>
> diff --git a/MdePkg/Include/Protocol/Udp4.h
> b/MdePkg/Include/Protocol/Udp4.h
> index a4ac6fd4e7..e7e41cadef 100644
> --- a/MdePkg/Include/Protocol/Udp4.h
> +++ b/MdePkg/Include/Protocol/Udp4.h
> @@ -33,7 +33,7 @@ typedef struct _EFI_UDP4_PROTOCOL
> EFI_UDP4_PROTOCOL;
>
>
> ///
>
> /// EFI_UDP4_SERVICE_POINT is deprecated in the UEFI 2.4B and should
> not be used any more.
>
> -/// The definition in here is only present to provide backwards
compatability.
>
> +/// The definition in here is only present to provide backwards
compatibility.
>
> ///
>
> typedef struct {
>
> EFI_HANDLE InstanceHandle;
>
> @@ -45,7 +45,7 @@ typedef struct {
>
>
> ///
>
> /// EFI_UDP4_VARIABLE_DATA is deprecated in the UEFI 2.4B and should
> not be used any more.
>
> -/// The definition in here is only present to provide backwards
compatability.
>
> +/// The definition in here is only present to provide backwards
compatibility.
>
> ///
>
> typedef struct {
>
> EFI_HANDLE DriverHandle;
>
> diff --git a/MdePkg/Include/Protocol/Udp6.h
> b/MdePkg/Include/Protocol/Udp6.h
> index 61fa623917..a8179c8f93 100644
> --- a/MdePkg/Include/Protocol/Udp6.h
> +++ b/MdePkg/Include/Protocol/Udp6.h
> @@ -28,7 +28,7 @@
>
>
> ///
>
> /// EFI_UDP6_SERVICE_POINT is deprecated in the UEFI 2.4B and should
> not be used any more.
>
> -/// The definition in here is only present to provide backwards
compatability.
>
> +/// The definition in here is only present to provide backwards
compatibility.
>
> ///
>
> typedef struct {
>
> ///
>
> @@ -59,7 +59,7 @@ typedef struct {
>
>
> ///
>
> /// EFI_UDP6_VARIABLE_DATA is deprecated in the UEFI 2.4B and should
> not be used any more.
>
> -/// The definition in here is only present to provide backwards
compatability.
>
> +/// The definition in here is only present to provide backwards
compatibility.
>
> ///
>
> typedef struct {
>
> ///
>
> diff --git a/MdePkg/Include/Protocol/UfsDeviceConfig.h
> b/MdePkg/Include/Protocol/UfsDeviceConfig.h
> index 34676c7831..b3e58c4aad 100644
> --- a/MdePkg/Include/Protocol/UfsDeviceConfig.h
> +++ b/MdePkg/Include/Protocol/UfsDeviceConfig.h
> @@ -19,7 +19,7 @@
> { 0xb81bfab0, 0xeb3, 0x4cf9, { 0x84, 0x65, 0x7f, 0xa9, 0x86, 0x36,
0x16,
> 0x64 }};
>
>
>
> //
>
> -// Forward reference for pure ANSI compatability
>
> +// Forward reference for pure ANSI compatibility
>
> //
>
> typedef struct _EFI_UFS_DEVICE_CONFIG_PROTOCOL
> EFI_UFS_DEVICE_CONFIG_PROTOCOL;
>
>
>
> diff --git a/MdePkg/Include/Protocol/UgaDraw.h
> b/MdePkg/Include/Protocol/UgaDraw.h
> index 8d33bf873c..f27fde5e32 100644
> --- a/MdePkg/Include/Protocol/UgaDraw.h
> +++ b/MdePkg/Include/Protocol/UgaDraw.h
> @@ -126,7 +126,7 @@ typedef enum {
>
>
> @retval EFI_SUCCESS - The Blt operation completed.
>
> @retval EFI_INVALID_PARAMETER - BltOperation is not valid.
>
> - @retval EFI_DEVICE_ERROR - A hardware error occurred
> writting to the video buffer.
>
> + @retval EFI_DEVICE_ERROR - A hardware error occurred
> writing to the video buffer.
>
>
>
> **/
>
> typedef
>
> diff --git a/MdePkg/Include/Protocol/Usb2HostController.h
> b/MdePkg/Include/Protocol/Usb2HostController.h
> index 06e20beba8..50bbb5574a 100644
> --- a/MdePkg/Include/Protocol/Usb2HostController.h
> +++ b/MdePkg/Include/Protocol/Usb2HostController.h
> @@ -20,7 +20,7 @@
> }
>
>
>
> ///
>
> -/// Forward reference for pure ANSI compatability
>
> +/// Forward reference for pure ANSI compatibility
>
> ///
>
> typedef struct _EFI_USB2_HC_PROTOCOL EFI_USB2_HC_PROTOCOL;
>
>
>
> diff --git a/MdePkg/Include/Protocol/UsbHostController.h
> b/MdePkg/Include/Protocol/UsbHostController.h
> index 8b626ec52a..7b215f6d03 100644
> --- a/MdePkg/Include/Protocol/UsbHostController.h
> +++ b/MdePkg/Include/Protocol/UsbHostController.h
> @@ -21,7 +21,7 @@
> }
>
>
>
> ///
>
> -/// Forward reference for pure ANSI compatability
>
> +/// Forward reference for pure ANSI compatibility
>
> ///
>
> typedef struct _EFI_USB_HC_PROTOCOL EFI_USB_HC_PROTOCOL;
>
>
>
> --
> 2.39.2 (Apple Git-144)
>
>
next prev parent reply other threads:[~2023-05-15 1:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-12 10:25 [PATCH] MdePkg Include: Fix typos Giri Mudusuru
2023-05-15 1:40 ` gaoliming [this message]
2023-05-15 2:48 ` Giri Mudusuru
2023-05-16 1:19 ` 回复: " gaoliming
2023-05-17 18:20 ` Giri Mudusuru
2023-05-18 3:06 ` [edk2-devel] " Michael Kubacki
2023-05-21 2:41 ` Giri Mudusuru
2023-05-22 1:14 ` 回复: " gaoliming
2023-05-22 14:45 ` Michael Kubacki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='013701d986ce$3f5154e0$bdf3fea0$@byosoft.com.cn' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox