From: "Nate DeSimone" <nathaniel.l.desimone@intel.com>
To: "Wei, David Y" <david.y.wei@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Wu, Hao A" <hao.a.wu@intel.com>,
"Gao, Liming" <liming.gao@intel.com>,
"Sinha, Ankit" <ankit.sinha@intel.com>,
"Agyeman, Prince" <prince.agyeman@intel.com>,
"Kubacki, Michael A" <michael.a.kubacki@intel.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>
Subject: Re: [edk2-platform patch 1/7] SimicsX58SktPkg: Add CPU Pkg for SimicsX58
Date: Thu, 15 Aug 2019 08:34:38 +0000 [thread overview]
Message-ID: <02A34F284D1DA44BB705E61F7180EF0AAEE07398@ORSMSX114.amr.corp.intel.com> (raw)
In-Reply-To: <f355a23266a626ab04435c116c75033f4cfe8681.1565389186.git.david.y.wei@intel.com>
Hi David,
Here are my comments:
1. All of the copyright years need to be updated to 2019.
2. Please remove " Contributed-under: TianoCore Contribution Agreement 1.0" from your commit message as it is no longer needed.
3. Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.c - Please fix all the interspersed trailing white-space.
4. Silicon/Intel/SimicsX58SktPkg/SktPei.dsc - line 2 reads like this "Component description file for the SkyLake SiPkg PEI drivers.". This is Simics, not Sky Lake, please update the comment.
5. Silicon/Intel/SimicsX58SktPkg/SktUefiBootInclude.fdf - lines 10 & 11 - please remove the commented out code.
Other than that, looks good! Please send an updated patch.
Thanks,
Nate
-----Original Message-----
From: Wei, David Y
Sent: Friday, August 9, 2019 3:47 PM
To: devel@edk2.groups.io
Cc: Wu, Hao A <hao.a.wu@intel.com>; Gao, Liming <liming.gao@intel.com>; Sinha, Ankit <ankit.sinha@intel.com>; Agyeman, Prince <prince.agyeman@intel.com>; Kubacki, Michael A <michael.a.kubacki@intel.com>; Desimone, Nathaniel L <nathaniel.l.desimone@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>
Subject: [edk2-platform patch 1/7] SimicsX58SktPkg: Add CPU Pkg for SimicsX58
Add CPU Pkg for SimicsX58. It is added for simics QSP project support
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ankit Sinha <ankit.sinha@intel.com>
Cc: Agyeman Prince <prince.agyeman@intel.com>
Cc: Kubacki Michael A <michael.a.kubacki@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Wei <david.y.wei@intel.com>
---
.../Override/UefiCpuPkg/SecCore/SecMain.c | 956 +++++++++++++++++++++
.../SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.c | 148 ++++
.../SimicsX58SktPkg/Smm/Access/SmmAccessPei.c | 353 ++++++++
.../SimicsX58SktPkg/Smm/Access/SmramInternal.c | 199 +++++
.../Override/UefiCpuPkg/SecCore/Ia32/SecEntry.nasm | 45 +
.../Override/UefiCpuPkg/SecCore/SecMain.inf | 71 ++
.../Override/UefiCpuPkg/SecCore/X64/SecEntry.nasm | 45 +
Silicon/Intel/SimicsX58SktPkg/SktPei.dsc | 18 +
.../Intel/SimicsX58SktPkg/SktPostMemoryInclude.fdf | 9 +
.../Intel/SimicsX58SktPkg/SktPreMemoryInclude.fdf | 10 +
Silicon/Intel/SimicsX58SktPkg/SktSecInclude.fdf | 17 +
.../Intel/SimicsX58SktPkg/SktUefiBootInclude.fdf | 16 +
.../SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.inf | 52 ++
.../SimicsX58SktPkg/Smm/Access/SmmAccessPei.inf | 64 ++
.../SimicsX58SktPkg/Smm/Access/SmramInternal.h | 81 ++
15 files changed, 2084 insertions(+)
create mode 100644 Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.c
create mode 100644 Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.c
create mode 100644 Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.c
create mode 100644 Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.c
create mode 100644 Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/Ia32/SecEntry.nasm
create mode 100644 Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.inf
create mode 100644 Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/X64/SecEntry.nasm
create mode 100644 Silicon/Intel/SimicsX58SktPkg/SktPei.dsc
create mode 100644 Silicon/Intel/SimicsX58SktPkg/SktPostMemoryInclude.fdf
create mode 100644 Silicon/Intel/SimicsX58SktPkg/SktPreMemoryInclude.fdf
create mode 100644 Silicon/Intel/SimicsX58SktPkg/SktSecInclude.fdf
create mode 100644 Silicon/Intel/SimicsX58SktPkg/SktUefiBootInclude.fdf
create mode 100644 Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.inf
create mode 100644 Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.inf
create mode 100644 Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.h
diff --git a/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.c b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.c
new file mode 100644
index 0000000000..c52d459ef2
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.c
@@ -0,0 +1,956 @@
+/** @file
+ Main SEC phase code. Transitions to PEI.
+
+ Copyright (c) 2008 - 2015, Intel Corporation. All rights reserved.<BR>
+ (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include <PiPei.h>
+
+#include <Library/PeimEntryPoint.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/PeiServicesLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiCpuLib.h>
+#include <Library/DebugAgentLib.h>
+#include <Library/IoLib.h>
+#include <Library/PeCoffLib.h>
+#include <Library/PeCoffGetEntryPointLib.h>
+#include <Library/PeCoffExtraActionLib.h>
+#include <Library/ExtractGuidedSectionLib.h>
+#include <Library/LocalApicLib.h>
+#include <Library/PciCf8Lib.h>
+
+#include <Ppi/TemporaryRamSupport.h>
+#include <IndustryStandard/X58Ich10.h>
+
+#define SEC_IDT_ENTRY_COUNT 34
+
+typedef struct _SEC_IDT_TABLE {
+ EFI_PEI_SERVICES *PeiService;
+ IA32_IDT_GATE_DESCRIPTOR IdtTable[SEC_IDT_ENTRY_COUNT];
+} SEC_IDT_TABLE;
+
+VOID
+EFIAPI
+SecStartupPhase2 (
+ IN VOID *Context
+ );
+
+EFI_STATUS
+EFIAPI
+TemporaryRamMigration (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PHYSICAL_ADDRESS TemporaryMemoryBase,
+ IN EFI_PHYSICAL_ADDRESS PermanentMemoryBase,
+ IN UINTN CopySize
+ );
+
+EFI_PEI_TEMPORARY_RAM_SUPPORT_PPI mTemporaryRamSupportPpi = {
+ TemporaryRamMigration
+};
+
+EFI_PEI_PPI_DESCRIPTOR mPrivateDispatchTable[] = {
+ {
+ (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
+ &gEfiTemporaryRamSupportPpiGuid,
+ &mTemporaryRamSupportPpi
+ },
+};
+
+//
+// Template of an IDT entry pointing to 10:FFFFFFE4h.
+//
+IA32_IDT_GATE_DESCRIPTOR mIdtEntryTemplate = {
+ { // Bits
+ 0xffe4, // OffsetLow
+ 0x10, // Selector
+ 0x0, // Reserved_0
+ IA32_IDT_GATE_TYPE_INTERRUPT_32, // GateType
+ 0xffff // OffsetHigh
+ }
+};
+
+/**
+ Locates the main boot firmware volume.
+
+ @param[in,out] BootFv On input, the base of the BootFv
+ On output, the decompressed main firmware volume
+
+ @retval EFI_SUCCESS The main firmware volume was located and decompressed
+ @retval EFI_NOT_FOUND The main firmware volume was not found
+
+**/
+EFI_STATUS
+FindMainFv (
+ IN OUT EFI_FIRMWARE_VOLUME_HEADER **BootFv
+ )
+{
+ EFI_FIRMWARE_VOLUME_HEADER *Fv;
+ UINTN Distance;
+
+ ASSERT (((UINTN) *BootFv & EFI_PAGE_MASK) == 0);
+
+ Fv = *BootFv;
+ Distance = (UINTN) (*BootFv)->FvLength;
+ do {
+ Fv = (EFI_FIRMWARE_VOLUME_HEADER*) ((UINT8*) Fv - EFI_PAGE_SIZE);
+ Distance += EFI_PAGE_SIZE;
+ if (Distance > SIZE_32MB) {
+ return EFI_NOT_FOUND;
+ }
+
+ if (Fv->Signature != EFI_FVH_SIGNATURE) {
+ continue;
+ }
+
+ if ((UINTN) Fv->FvLength > Distance) {
+ continue;
+ }
+
+ *BootFv = Fv;
+ return EFI_SUCCESS;
+
+ } while (TRUE);
+}
+
+/**
+ Locates a section within a series of sections
+ with the specified section type.
+
+ The Instance parameter indicates which instance of the section
+ type to return. (0 is first instance, 1 is second...)
+
+ @param[in] Sections The sections to search
+ @param[in] SizeOfSections Total size of all sections
+ @param[in] SectionType The section type to locate
+ @param[in] Instance The section instance number
+ @param[out] FoundSection The FFS section if found
+
+ @retval EFI_SUCCESS The file and section was found
+ @retval EFI_NOT_FOUND The file and section was not found
+ @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
+
+**/
+EFI_STATUS
+FindFfsSectionInstance (
+ IN VOID *Sections,
+ IN UINTN SizeOfSections,
+ IN EFI_SECTION_TYPE SectionType,
+ IN UINTN Instance,
+ OUT EFI_COMMON_SECTION_HEADER **FoundSection
+ )
+{
+ EFI_PHYSICAL_ADDRESS CurrentAddress;
+ UINT32 Size;
+ EFI_PHYSICAL_ADDRESS EndOfSections;
+ EFI_COMMON_SECTION_HEADER *Section;
+ EFI_PHYSICAL_ADDRESS EndOfSection;
+
+ //
+ // Loop through the FFS file sections within the PEI Core FFS file
+ //
+ EndOfSection = (EFI_PHYSICAL_ADDRESS)(UINTN) Sections;
+ EndOfSections = EndOfSection + SizeOfSections;
+ for (;;) {
+ if (EndOfSection == EndOfSections) {
+ break;
+ }
+ CurrentAddress = (EndOfSection + 3) & ~(3ULL);
+ if (CurrentAddress >= EndOfSections) {
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ Section = (EFI_COMMON_SECTION_HEADER*)(UINTN) CurrentAddress;
+ DEBUG ((EFI_D_INFO, "Section->Type: 0x%x\n", Section->Type));
+
+ Size = SECTION_SIZE (Section);
+ if (Size < sizeof (*Section)) {
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ EndOfSection = CurrentAddress + Size;
+ if (EndOfSection > EndOfSections) {
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ //
+ // Look for the requested section type
+ //
+ if (Section->Type == SectionType) {
+ if (Instance == 0) {
+ *FoundSection = Section;
+ return EFI_SUCCESS;
+ } else {
+ Instance--;
+ }
+ }
+ DEBUG ((EFI_D_INFO, "Section->Type (0x%x) != SectionType (0x%x)\n", Section->Type, SectionType));
+ }
+
+ return EFI_NOT_FOUND;
+}
+
+/**
+ Locates a section within a series of sections
+ with the specified section type.
+
+ @param[in] Sections The sections to search
+ @param[in] SizeOfSections Total size of all sections
+ @param[in] SectionType The section type to locate
+ @param[out] FoundSection The FFS section if found
+
+ @retval EFI_SUCCESS The file and section was found
+ @retval EFI_NOT_FOUND The file and section was not found
+ @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
+
+**/
+EFI_STATUS
+FindFfsSectionInSections (
+ IN VOID *Sections,
+ IN UINTN SizeOfSections,
+ IN EFI_SECTION_TYPE SectionType,
+ OUT EFI_COMMON_SECTION_HEADER **FoundSection
+ )
+{
+ return FindFfsSectionInstance (
+ Sections,
+ SizeOfSections,
+ SectionType,
+ 0,
+ FoundSection
+ );
+}
+
+/**
+ Locates a FFS file with the specified file type and a section
+ within that file with the specified section type.
+
+ @param[in] Fv The firmware volume to search
+ @param[in] FileType The file type to locate
+ @param[in] SectionType The section type to locate
+ @param[out] FoundSection The FFS section if found
+
+ @retval EFI_SUCCESS The file and section was found
+ @retval EFI_NOT_FOUND The file and section was not found
+ @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
+
+**/
+EFI_STATUS
+FindFfsFileAndSection (
+ IN EFI_FIRMWARE_VOLUME_HEADER *Fv,
+ IN EFI_FV_FILETYPE FileType,
+ IN EFI_SECTION_TYPE SectionType,
+ OUT EFI_COMMON_SECTION_HEADER **FoundSection
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS CurrentAddress;
+ EFI_PHYSICAL_ADDRESS EndOfFirmwareVolume;
+ EFI_FFS_FILE_HEADER *File;
+ UINT32 Size;
+ EFI_PHYSICAL_ADDRESS EndOfFile;
+
+ if (Fv->Signature != EFI_FVH_SIGNATURE) {
+ DEBUG ((EFI_D_ERROR, "FV at %p does not have FV header signature\n", Fv));
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ CurrentAddress = (EFI_PHYSICAL_ADDRESS)(UINTN) Fv;
+ EndOfFirmwareVolume = CurrentAddress + Fv->FvLength;
+
+ //
+ // Loop through the FFS files in the Boot Firmware Volume
+ //
+ for (EndOfFile = CurrentAddress + Fv->HeaderLength; ; ) {
+
+ CurrentAddress = (EndOfFile + 7) & ~(7ULL);
+ if (CurrentAddress > EndOfFirmwareVolume) {
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ File = (EFI_FFS_FILE_HEADER*)(UINTN) CurrentAddress;
+ Size = *(UINT32*) File->Size & 0xffffff;
+ if (Size < (sizeof (*File) + sizeof (EFI_COMMON_SECTION_HEADER))) {
+ return EFI_VOLUME_CORRUPTED;
+ }
+ DEBUG ((EFI_D_INFO, "File->Type: 0x%x\n", File->Type));
+
+ EndOfFile = CurrentAddress + Size;
+ if (EndOfFile > EndOfFirmwareVolume) {
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ //
+ // Look for the request file type
+ //
+ if (File->Type != FileType) {
+ DEBUG ((EFI_D_INFO, "File->Type (0x%x) != FileType (0x%x)\n", File->Type, FileType));
+ continue;
+ }
+
+ Status = FindFfsSectionInSections (
+ (VOID*) (File + 1),
+ (UINTN) EndOfFile - (UINTN) (File + 1),
+ SectionType,
+ FoundSection
+ );
+ if (!EFI_ERROR (Status) || (Status == EFI_VOLUME_CORRUPTED)) {
+ return Status;
+ }
+ }
+}
+
+/**
+ Locates the compressed main firmware volume and decompresses it.
+
+ @param[in,out] Fv On input, the firmware volume to search
+ On output, the decompressed BOOT/PEI FV
+
+ @retval EFI_SUCCESS The file and section was found
+ @retval EFI_NOT_FOUND The file and section was not found
+ @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
+
+**/
+EFI_STATUS
+DecompressMemFvs (
+ IN OUT EFI_FIRMWARE_VOLUME_HEADER **Fv
+ )
+{
+ EFI_STATUS Status;
+ EFI_GUID_DEFINED_SECTION *Section;
+ UINT32 OutputBufferSize;
+ UINT32 ScratchBufferSize;
+ UINT16 SectionAttribute;
+ UINT32 AuthenticationStatus;
+ VOID *OutputBuffer;
+ VOID *ScratchBuffer;
+ EFI_COMMON_SECTION_HEADER *FvSection;
+ EFI_FIRMWARE_VOLUME_HEADER *PeiMemFv;
+ EFI_FIRMWARE_VOLUME_HEADER *DxeMemFv;
+ UINT32 FvHeaderSize;
+ UINT32 FvSectionSize;
+
+ FvSection = (EFI_COMMON_SECTION_HEADER*) NULL;
+
+ DEBUG ((EFI_D_INFO, "Find and decompress FV image.\n"));
+ Status = FindFfsFileAndSection (
+ *Fv,
+ EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE,
+ EFI_SECTION_GUID_DEFINED,
+ (EFI_COMMON_SECTION_HEADER**) &Section
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Unable to find GUID defined section\n"));
+ return Status;
+ }
+
+ Status = ExtractGuidedSectionGetInfo (
+ Section,
+ &OutputBufferSize,
+ &ScratchBufferSize,
+ &SectionAttribute
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Unable to GetInfo for GUIDed section\n"));
+ return Status;
+ }
+
+ OutputBuffer = (VOID*) ((UINT8*)(UINTN) PcdGet32 (PcdSimicsDxeMemFvBase) + SIZE_1MB);
+ ScratchBuffer = ALIGN_POINTER ((UINT8*) OutputBuffer + OutputBufferSize, SIZE_1MB);
+
+ DEBUG ((EFI_D_INFO, "PcdSimicsDxeMemFvBase: 0x%x\n", PcdGet32 (PcdSimicsDxeMemFvBase)));
+ DEBUG ((EFI_D_INFO, "OutputBuffer: 0x%x\n", OutputBuffer));
+ DEBUG ((EFI_D_INFO, "OutputBufferSize: 0x%x\n", OutputBufferSize));
+ DEBUG ((EFI_D_INFO, "ScratchBuffer: 0x%x\n", ScratchBuffer));
+ DEBUG ((EFI_D_INFO, "ScratchBufferSize: 0x%x\n", ScratchBufferSize));
+ DEBUG ((EFI_D_INFO, "PcdSimicsDecompressionScratchEnd: 0x%x\n", PcdGet32 (PcdSimicsDecompressionScratchEnd)));
+
+ DEBUG ((EFI_D_VERBOSE, "%a: OutputBuffer@%p+0x%x ScratchBuffer@%p+0x%x "
+ "PcdSimicsDecompressionScratchEnd=0x%x\n", __FUNCTION__, OutputBuffer,
+ OutputBufferSize, ScratchBuffer, ScratchBufferSize,
+ PcdGet32 (PcdSimicsDecompressionScratchEnd)));
+ ASSERT ((UINTN)ScratchBuffer + ScratchBufferSize ==
+ PcdGet32 (PcdSimicsDecompressionScratchEnd));
+
+ Status = ExtractGuidedSectionDecode (
+ Section,
+ &OutputBuffer,
+ ScratchBuffer,
+ &AuthenticationStatus
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Error during GUID section decode\n"));
+ return Status;
+ }
+
+ Status = FindFfsSectionInstance (
+ OutputBuffer,
+ OutputBufferSize,
+ EFI_SECTION_FIRMWARE_VOLUME_IMAGE,
+ 0,
+ &FvSection
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Unable to find PEI FV section\n"));
+ return Status;
+ }
+
+ ASSERT (SECTION_SIZE (FvSection) ==
+ (PcdGet32 (PcdSimicsPeiMemFvSize) + sizeof (*FvSection)));
+ ASSERT (FvSection->Type == EFI_SECTION_FIRMWARE_VOLUME_IMAGE);
+
+ PeiMemFv = (EFI_FIRMWARE_VOLUME_HEADER*)(UINTN) PcdGet32 (PcdSimicsPeiMemFvBase);
+ CopyMem (PeiMemFv, (VOID*) (FvSection + 1), PcdGet32 (PcdSimicsPeiMemFvSize));
+
+ if (PeiMemFv->Signature != EFI_FVH_SIGNATURE) {
+ DEBUG ((EFI_D_ERROR, "Extracted FV at %p does not have FV header signature\n", PeiMemFv));
+ CpuDeadLoop ();
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ Status = FindFfsSectionInstance (
+ OutputBuffer,
+ OutputBufferSize,
+ EFI_SECTION_FIRMWARE_VOLUME_IMAGE,
+ 1,
+ &FvSection
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Unable to find DXE FV section\n"));
+ return Status;
+ }
+
+ ASSERT (FvSection->Type == EFI_SECTION_FIRMWARE_VOLUME_IMAGE);
+
+ if (IS_SECTION2 (FvSection)) {
+ FvSectionSize = SECTION2_SIZE (FvSection);
+ FvHeaderSize = sizeof (EFI_COMMON_SECTION_HEADER2);
+ } else {
+ FvSectionSize = SECTION_SIZE (FvSection);
+ FvHeaderSize = sizeof (EFI_COMMON_SECTION_HEADER);
+ }
+
+ ASSERT (FvSectionSize == (PcdGet32 (PcdSimicsDxeMemFvSize) + FvHeaderSize));
+
+ DxeMemFv = (EFI_FIRMWARE_VOLUME_HEADER*)(UINTN) PcdGet32 (PcdSimicsDxeMemFvBase);
+ CopyMem (DxeMemFv, (VOID*) ((UINTN)FvSection + FvHeaderSize), PcdGet32 (PcdSimicsDxeMemFvSize));
+
+ if (DxeMemFv->Signature != EFI_FVH_SIGNATURE) {
+ DEBUG ((EFI_D_ERROR, "Extracted FV at %p does not have FV header signature\n", DxeMemFv));
+ CpuDeadLoop ();
+ return EFI_VOLUME_CORRUPTED;
+ }
+
+ *Fv = PeiMemFv;
+ return EFI_SUCCESS;
+}
+
+/**
+ Locates the PEI Core entry point address
+
+ @param[in] Fv The firmware volume to search
+ @param[out] PeiCoreEntryPoint The entry point of the PEI Core image
+
+ @retval EFI_SUCCESS The file and section was found
+ @retval EFI_NOT_FOUND The file and section was not found
+ @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
+
+**/
+EFI_STATUS
+FindPeiCoreImageBaseInFv (
+ IN EFI_FIRMWARE_VOLUME_HEADER *Fv,
+ OUT EFI_PHYSICAL_ADDRESS *PeiCoreImageBase
+ )
+{
+ EFI_STATUS Status;
+ EFI_COMMON_SECTION_HEADER *Section;
+
+ DEBUG ((EFI_D_ERROR, "Find PEI Core image.\n"));
+ Status = FindFfsFileAndSection (
+ Fv,
+ EFI_FV_FILETYPE_PEI_CORE,
+ EFI_SECTION_PE32,
+ &Section
+ );
+ if (EFI_ERROR (Status)) {
+ Status = FindFfsFileAndSection (
+ Fv,
+ EFI_FV_FILETYPE_PEI_CORE,
+ EFI_SECTION_TE,
+ &Section
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Unable to find PEI Core image\n"));
+ return Status;
+ }
+ }
+
+ *PeiCoreImageBase = (EFI_PHYSICAL_ADDRESS)(UINTN)(Section + 1);
+ DEBUG ((EFI_D_INFO, "PEI core image base 0x%016LX.\n", *PeiCoreImageBase));
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Reads 8-bits of CMOS data.
+
+ Reads the 8-bits of CMOS data at the location specified by Index.
+ The 8-bit read value is returned.
+
+ @param Index The CMOS location to read.
+
+ @return The value read.
+
+**/
+STATIC
+UINT8
+CmosRead8 (
+ IN UINTN Index
+ )
+{
+ IoWrite8 (0x70, (UINT8) Index);
+ return IoRead8 (0x71);
+}
+
+
+STATIC
+BOOLEAN
+IsS3Resume (
+ VOID
+ )
+{
+ DEBUG((EFI_D_INFO, "modeValue = %x\n", IoBitFieldRead16(ICH10_PMBASE_IO + 4, 10, 12)));
+ return (IoBitFieldRead16(ICH10_PMBASE_IO + 4, 10, 12) == 0x5);
+}
+
+
+STATIC
+EFI_STATUS
+GetS3ResumePeiFv (
+ IN OUT EFI_FIRMWARE_VOLUME_HEADER **PeiFv
+ )
+{
+ *PeiFv = (EFI_FIRMWARE_VOLUME_HEADER*)(UINTN) PcdGet32 (PcdSimicsPeiMemFvBase);
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Locates the PEI Core entry point address
+
+ @param[in,out] Fv The firmware volume to search
+ @param[out] PeiCoreEntryPoint The entry point of the PEI Core image
+
+ @retval EFI_SUCCESS The file and section was found
+ @retval EFI_NOT_FOUND The file and section was not found
+ @retval EFI_VOLUME_CORRUPTED The firmware volume was corrupted
+
+**/
+VOID
+FindPeiCoreImageBase (
+ IN OUT EFI_FIRMWARE_VOLUME_HEADER **BootFv,
+ OUT EFI_PHYSICAL_ADDRESS *PeiCoreImageBase
+ )
+{
+ BOOLEAN S3Resume;
+
+ *PeiCoreImageBase = 0;
+
+ S3Resume = IsS3Resume ();
+ if (S3Resume && !FeaturePcdGet (PcdSmmSmramRequire)) {
+ //
+ // A malicious runtime OS may have injected something into our previously
+ // decoded PEI FV, but we don't care about that unless SMM/SMRAM is required.
+ //
+ DEBUG ((EFI_D_INFO, "SEC: S3 resume\n"));
+ GetS3ResumePeiFv (BootFv);
+ } else {
+ //
+ // We're either not resuming, or resuming "securely" -- we'll decompress
+ // both PEI FV and DXE FV from pristine flash.
+ //
+ DEBUG ((EFI_D_INFO, "SEC: %a\n",
+ S3Resume ? "S3 resume (with PEI decompression)" : "Normal boot"));
+ FindMainFv (BootFv);
+
+ DecompressMemFvs (BootFv);
+ }
+
+ FindPeiCoreImageBaseInFv (*BootFv, PeiCoreImageBase);
+}
+
+/**
+ Find core image base.
+
+**/
+EFI_STATUS
+FindImageBase (
+ IN EFI_FIRMWARE_VOLUME_HEADER *BootFirmwareVolumePtr,
+ OUT EFI_PHYSICAL_ADDRESS *SecCoreImageBase
+ )
+{
+ EFI_PHYSICAL_ADDRESS CurrentAddress;
+ EFI_PHYSICAL_ADDRESS EndOfFirmwareVolume;
+ EFI_FFS_FILE_HEADER *File;
+ UINT32 Size;
+ EFI_PHYSICAL_ADDRESS EndOfFile;
+ EFI_COMMON_SECTION_HEADER *Section;
+ EFI_PHYSICAL_ADDRESS EndOfSection;
+
+ *SecCoreImageBase = 0;
+
+ CurrentAddress = (EFI_PHYSICAL_ADDRESS)(UINTN) BootFirmwareVolumePtr;
+ EndOfFirmwareVolume = CurrentAddress + BootFirmwareVolumePtr->FvLength;
+
+ //
+ // Loop through the FFS files in the Boot Firmware Volume
+ //
+ for (EndOfFile = CurrentAddress + BootFirmwareVolumePtr->HeaderLength; ; ) {
+
+ CurrentAddress = (EndOfFile + 7) & 0xfffffffffffffff8ULL;
+ if (CurrentAddress > EndOfFirmwareVolume) {
+ return EFI_NOT_FOUND;
+ }
+
+ File = (EFI_FFS_FILE_HEADER*)(UINTN) CurrentAddress;
+ Size = *(UINT32*) File->Size & 0xffffff;
+ if (Size < sizeof (*File)) {
+ return EFI_NOT_FOUND;
+ }
+
+ EndOfFile = CurrentAddress + Size;
+ if (EndOfFile > EndOfFirmwareVolume) {
+ return EFI_NOT_FOUND;
+ }
+
+ //
+ // Look for SEC Core
+ //
+ if (File->Type != EFI_FV_FILETYPE_SECURITY_CORE) {
+ continue;
+ }
+
+ //
+ // Loop through the FFS file sections within the FFS file
+ //
+ EndOfSection = (EFI_PHYSICAL_ADDRESS)(UINTN) (File + 1);
+ for (;;) {
+ CurrentAddress = (EndOfSection + 3) & 0xfffffffffffffffcULL;
+ Section = (EFI_COMMON_SECTION_HEADER*)(UINTN) CurrentAddress;
+
+ Size = *(UINT32*) Section->Size & 0xffffff;
+ if (Size < sizeof (*Section)) {
+ return EFI_NOT_FOUND;
+ }
+
+ EndOfSection = CurrentAddress + Size;
+ if (EndOfSection > EndOfFile) {
+ return EFI_NOT_FOUND;
+ }
+
+ //
+ // Look for executable sections
+ //
+ if (Section->Type == EFI_SECTION_PE32 || Section->Type == EFI_SECTION_TE) {
+ if (File->Type == EFI_FV_FILETYPE_SECURITY_CORE) {
+ *SecCoreImageBase = (PHYSICAL_ADDRESS) (UINTN) (Section + 1);
+ }
+ break;
+ }
+ }
+
+ //
+ // SEC Core image found
+ //
+ if (*SecCoreImageBase != 0) {
+ return EFI_SUCCESS;
+ }
+ }
+}
+
+/*
+ Find and return Pei Core entry point.
+
+ It also find SEC and PEI Core file debug information. It will report them if
+ remote debug is enabled.
+
+**/
+VOID
+FindAndReportEntryPoints (
+ IN EFI_FIRMWARE_VOLUME_HEADER **BootFirmwareVolumePtr,
+ OUT EFI_PEI_CORE_ENTRY_POINT *PeiCoreEntryPoint
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS SecCoreImageBase;
+ EFI_PHYSICAL_ADDRESS PeiCoreImageBase;
+ PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;
+
+ //
+ // Find SEC Core and PEI Core image base
+ //
+ Status = FindImageBase (*BootFirmwareVolumePtr, &SecCoreImageBase);
+ ASSERT_EFI_ERROR (Status);
+
+ FindPeiCoreImageBase (BootFirmwareVolumePtr, &PeiCoreImageBase);
+
+ ZeroMem ((VOID *) &ImageContext, sizeof (PE_COFF_LOADER_IMAGE_CONTEXT));
+ //
+ // Report SEC Core debug information when remote debug is enabled
+ //
+ ImageContext.ImageAddress = SecCoreImageBase;
+ ImageContext.PdbPointer = PeCoffLoaderGetPdbPointer ((VOID*) (UINTN) ImageContext.ImageAddress);
+ PeCoffLoaderRelocateImageExtraAction (&ImageContext);
+
+ //
+ // Report PEI Core debug information when remote debug is enabled
+ //
+ ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS)(UINTN)PeiCoreImageBase;
+ ImageContext.PdbPointer = PeCoffLoaderGetPdbPointer ((VOID*) (UINTN) ImageContext.ImageAddress);
+ PeCoffLoaderRelocateImageExtraAction (&ImageContext);
+
+ //
+ // Find PEI Core entry point
+ //
+ Status = PeCoffLoaderGetEntryPoint ((VOID *) (UINTN) PeiCoreImageBase, (VOID**) PeiCoreEntryPoint);
+ if (EFI_ERROR (Status)) {
+ *PeiCoreEntryPoint = 0;
+ }
+
+ return;
+}
+
+VOID
+EFIAPI
+SecCoreStartupWithStack (
+ IN EFI_FIRMWARE_VOLUME_HEADER *BootFv,
+ IN VOID *TopOfCurrentStack
+ )
+{
+ EFI_SEC_PEI_HAND_OFF SecCoreData;
+ SEC_IDT_TABLE IdtTableInStack;
+ IA32_DESCRIPTOR IdtDescriptor;
+ UINT32 Index;
+ volatile UINT8 *Table;
+
+ //
+ // Initialize floating point operating environment
+ // to be compliant with UEFI spec.
+ //
+ InitializeFloatingPointUnits ();
+
+ //
+ // Initialize the PCIe Configuration base register.
+ //
+ PciCf8Write32 (PCI_CF8_LIB_ADDRESS (0xFF, 0, 1, 0x50), 0xE0000001);
+
+ //
+ // To ensure SMM can't be compromised on S3 resume, we must force re-init of
+ // the BaseExtractGuidedSectionLib. Since this is before library contructors
+ // are called, we must use a loop rather than SetMem.
+ //
+ Table = (UINT8*)(UINTN)FixedPcdGet64 (PcdGuidedExtractHandlerTableAddress);
+ for (Index = 0;
+ Index < FixedPcdGet32 (PcdGuidedExtractHandlerTableSize);
+ ++Index) {
+ Table[Index] = 0;
+ }
+
+ ProcessLibraryConstructorList (NULL, NULL);
+
+ DEBUG ((EFI_D_INFO,
+ "SecCoreStartupWithStack(0x%x, 0x%x)\n",
+ (UINT32)(UINTN)BootFv,
+ (UINT32)(UINTN)TopOfCurrentStack
+ ));
+
+ //
+ // Initialize IDT
+ //
+ IdtTableInStack.PeiService = NULL;
+ for (Index = 0; Index < SEC_IDT_ENTRY_COUNT; Index ++) {
+ CopyMem (&IdtTableInStack.IdtTable[Index], &mIdtEntryTemplate, sizeof (mIdtEntryTemplate));
+ }
+
+ IdtDescriptor.Base = (UINTN)&IdtTableInStack.IdtTable;
+ IdtDescriptor.Limit = (UINT16)(sizeof (IdtTableInStack.IdtTable) - 1);
+
+ AsmWriteIdtr (&IdtDescriptor);
+
+#if defined (MDE_CPU_X64)
+ //
+ // ASSERT that the Page Tables were set by the reset vector code to
+ // the address we expect.
+ //
+ ASSERT (AsmReadCr3 () == (UINTN) PcdGet32 (PcdSimicsSecPageTablesBase));
+#endif
+
+ //
+ // |-------------| <-- TopOfCurrentStack
+ // | Stack | 32k
+ // |-------------|
+ // | Heap | 32k
+ // |-------------| <-- SecCoreData.TemporaryRamBase
+ //
+
+ ASSERT ((UINTN) (PcdGet32 (PcdSimicsSecPeiTempRamBase) +
+ PcdGet32 (PcdSimicsSecPeiTempRamSize)) ==
+ (UINTN) TopOfCurrentStack);
+
+ //
+ // Initialize SEC hand-off state
+ //
+ SecCoreData.DataSize = sizeof(EFI_SEC_PEI_HAND_OFF);
+
+ SecCoreData.TemporaryRamSize = (UINTN) PcdGet32 (PcdSimicsSecPeiTempRamSize);
+ SecCoreData.TemporaryRamBase = (VOID*)((UINT8 *)TopOfCurrentStack - SecCoreData.TemporaryRamSize);
+
+ SecCoreData.PeiTemporaryRamBase = SecCoreData.TemporaryRamBase;
+ SecCoreData.PeiTemporaryRamSize = SecCoreData.TemporaryRamSize >> 1;
+
+ SecCoreData.StackBase = (UINT8 *)SecCoreData.TemporaryRamBase + SecCoreData.PeiTemporaryRamSize;
+ SecCoreData.StackSize = SecCoreData.TemporaryRamSize >> 1;
+
+ SecCoreData.BootFirmwareVolumeBase = BootFv;
+ SecCoreData.BootFirmwareVolumeSize = (UINTN) BootFv->FvLength;
+
+ //
+ // Make sure the 8259 is masked before initializing the Debug Agent and the debug timer is enabled
+ //
+ IoWrite8 (0x21, 0xff);
+ IoWrite8 (0xA1, 0xff);
+
+ //
+ // Initialize Local APIC Timer hardware and disable Local APIC Timer
+ // interrupts before initializing the Debug Agent and the debug timer is
+ // enabled.
+ //
+ InitializeApicTimer (0, MAX_UINT32, TRUE, 5);
+ DisableApicTimerInterrupt ();
+
+ //
+ // Initialize Debug Agent to support source level debug in SEC/PEI phases before memory ready.
+ //
+ InitializeDebugAgent (DEBUG_AGENT_INIT_PREMEM_SEC, &SecCoreData, SecStartupPhase2);
+}
+
+/**
+ Caller provided function to be invoked at the end of InitializeDebugAgent().
+
+ Entry point to the C language phase of SEC. After the SEC assembly
+ code has initialized some temporary memory and set up the stack,
+ the control is transferred to this function.
+
+ @param[in] Context The first input parameter of InitializeDebugAgent().
+
+**/
+VOID
+EFIAPI
+SecStartupPhase2(
+ IN VOID *Context
+ )
+{
+ EFI_SEC_PEI_HAND_OFF *SecCoreData;
+ EFI_FIRMWARE_VOLUME_HEADER *BootFv;
+ EFI_PEI_CORE_ENTRY_POINT PeiCoreEntryPoint;
+
+ SecCoreData = (EFI_SEC_PEI_HAND_OFF *) Context;
+
+ //
+ // Find PEI Core entry point. It will report SEC and Pei Core debug information if remote debug
+ // is enabled.
+ //
+ BootFv = (EFI_FIRMWARE_VOLUME_HEADER *)SecCoreData->BootFirmwareVolumeBase;
+ FindAndReportEntryPoints (&BootFv, &PeiCoreEntryPoint);
+ SecCoreData->BootFirmwareVolumeBase = BootFv;
+ SecCoreData->BootFirmwareVolumeSize = (UINTN) BootFv->FvLength;
+
+ //
+ // Transfer the control to the PEI core
+ //
+ (*PeiCoreEntryPoint) (SecCoreData, (EFI_PEI_PPI_DESCRIPTOR *)&mPrivateDispatchTable);
+
+ //
+ // If we get here then the PEI Core returned, which is not recoverable.
+ //
+ ASSERT (FALSE);
+ CpuDeadLoop ();
+}
+
+EFI_STATUS
+EFIAPI
+TemporaryRamMigration (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PHYSICAL_ADDRESS TemporaryMemoryBase,
+ IN EFI_PHYSICAL_ADDRESS PermanentMemoryBase,
+ IN UINTN CopySize
+ )
+{
+ IA32_DESCRIPTOR IdtDescriptor;
+ VOID *OldHeap;
+ VOID *NewHeap;
+ VOID *OldStack;
+ VOID *NewStack;
+ DEBUG_AGENT_CONTEXT_POSTMEM_SEC DebugAgentContext;
+ BOOLEAN OldStatus;
+ BASE_LIBRARY_JUMP_BUFFER JumpBuffer;
+
+ DEBUG ((EFI_D_INFO,
+ "TemporaryRamMigration(0x%Lx, 0x%Lx, 0x%Lx)\n",
+ TemporaryMemoryBase,
+ PermanentMemoryBase,
+ (UINT64)CopySize
+ ));
+
+ OldHeap = (VOID*)(UINTN)TemporaryMemoryBase;
+ NewHeap = (VOID*)((UINTN)PermanentMemoryBase + (CopySize >> 1));
+
+ OldStack = (VOID*)((UINTN)TemporaryMemoryBase + (CopySize >> 1));
+ NewStack = (VOID*)(UINTN)PermanentMemoryBase;
+
+ DebugAgentContext.HeapMigrateOffset = (UINTN)NewHeap - (UINTN)OldHeap;
+ DebugAgentContext.StackMigrateOffset = (UINTN)NewStack - (UINTN)OldStack;
+
+ OldStatus = SaveAndSetDebugTimerInterrupt (FALSE);
+ InitializeDebugAgent (DEBUG_AGENT_INIT_POSTMEM_SEC, (VOID *) &DebugAgentContext, NULL);
+
+ //
+ // Migrate Heap
+ //
+ CopyMem (NewHeap, OldHeap, CopySize >> 1);
+
+ //
+ // Migrate Stack
+ //
+ CopyMem (NewStack, OldStack, CopySize >> 1);
+
+ //
+ // Rebase IDT table in permanent memory
+ //
+ AsmReadIdtr (&IdtDescriptor);
+ IdtDescriptor.Base = IdtDescriptor.Base - (UINTN)OldStack + (UINTN)NewStack;
+
+ AsmWriteIdtr (&IdtDescriptor);
+
+ //
+ // Use SetJump()/LongJump() to switch to a new stack.
+ //
+ if (SetJump (&JumpBuffer) == 0) {
+#if defined (MDE_CPU_IA32)
+ JumpBuffer.Esp = JumpBuffer.Esp + DebugAgentContext.StackMigrateOffset;
+#endif
+#if defined (MDE_CPU_X64)
+ JumpBuffer.Rsp = JumpBuffer.Rsp + DebugAgentContext.StackMigrateOffset;
+#endif
+ LongJump (&JumpBuffer, (UINTN)-1);
+ }
+
+ SaveAndSetDebugTimerInterrupt (OldStatus);
+
+ return EFI_SUCCESS;
+}
diff --git a/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.c b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.c
new file mode 100644
index 0000000000..771fddb487
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.c
@@ -0,0 +1,148 @@
+/** @file
+ A DXE_DRIVER providing SMRAM access by producing EFI_SMM_ACCESS2_PROTOCOL.
+
+ X58 TSEG is expected to have been verified and set up by the SmmAccessPei
+ driver.
+
+ Copyright (C) 2013, 2015, Red Hat, Inc.<BR>
+ Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include <Library/DebugLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/SmmAccess2.h>
+
+#include "SmramInternal.h"
+
+/**
+ Opens the SMRAM area to be accessible by a boot-service driver.
+
+ This function "opens" SMRAM so that it is visible while not inside of SMM.
+ The function should return EFI_UNSUPPORTED if the hardware does not support
+ hiding of SMRAM. The function should return EFI_DEVICE_ERROR if the SMRAM
+ configuration is locked.
+
+ @param[in] This The EFI_SMM_ACCESS2_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The operation was successful.
+ @retval EFI_UNSUPPORTED The system does not support opening and closing of
+ SMRAM.
+ @retval EFI_DEVICE_ERROR SMRAM cannot be opened, perhaps because it is
+ locked.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+SmmAccess2DxeOpen (
+ IN EFI_SMM_ACCESS2_PROTOCOL *This
+ )
+{
+ return SmramAccessOpen (&This->LockState, &This->OpenState);
+}
+
+/**
+ Inhibits access to the SMRAM.
+
+ This function "closes" SMRAM so that it is not visible while outside of SMM.
+ The function should return EFI_UNSUPPORTED if the hardware does not support
+ hiding of SMRAM.
+
+ @param[in] This The EFI_SMM_ACCESS2_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The operation was successful.
+ @retval EFI_UNSUPPORTED The system does not support opening and closing of
+ SMRAM.
+ @retval EFI_DEVICE_ERROR SMRAM cannot be closed.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+SmmAccess2DxeClose (
+ IN EFI_SMM_ACCESS2_PROTOCOL *This
+ )
+{
+ return SmramAccessClose (&This->LockState, &This->OpenState);
+}
+
+/**
+ Inhibits access to the SMRAM.
+
+ This function prohibits access to the SMRAM region. This function is usually
+ implemented such that it is a write-once operation.
+
+ @param[in] This The EFI_SMM_ACCESS2_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The device was successfully locked.
+ @retval EFI_UNSUPPORTED The system does not support locking of SMRAM.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+SmmAccess2DxeLock (
+ IN EFI_SMM_ACCESS2_PROTOCOL *This
+ )
+{
+ return SmramAccessLock (&This->LockState, &This->OpenState);
+}
+
+/**
+ Queries the memory controller for the possible regions that will support
+ SMRAM.
+
+ @param[in] This The EFI_SMM_ACCESS2_PROTOCOL instance.
+ @param[in,out] SmramMapSize A pointer to the size, in bytes, of the
+ SmramMemoryMap buffer.
+ @param[in,out] SmramMap A pointer to the buffer in which firmware
+ places the current memory map.
+
+ @retval EFI_SUCCESS The chipset supported the given resource.
+ @retval EFI_BUFFER_TOO_SMALL The SmramMap parameter was too small. The
+ current buffer size needed to hold the memory
+ map is returned in SmramMapSize.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+SmmAccess2DxeGetCapabilities (
+ IN CONST EFI_SMM_ACCESS2_PROTOCOL *This,
+ IN OUT UINTN *SmramMapSize,
+ IN OUT EFI_SMRAM_DESCRIPTOR *SmramMap
+ )
+{
+ return SmramAccessGetCapabilities (This->LockState, This->OpenState,
+ SmramMapSize, SmramMap);
+}
+
+//
+// LockState and OpenState will be filled in by the entry point.
+//
+STATIC EFI_SMM_ACCESS2_PROTOCOL mAccess2 = {
+ &SmmAccess2DxeOpen,
+ &SmmAccess2DxeClose,
+ &SmmAccess2DxeLock,
+ &SmmAccess2DxeGetCapabilities
+};
+
+//
+// Entry point of this driver.
+//
+EFI_STATUS
+EFIAPI
+SmmAccess2DxeEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ //
+ // This module should only be included if SMRAM support is required.
+ //
+ ASSERT (FeaturePcdGet (PcdSmmSmramRequire));
+
+ GetStates (&mAccess2.LockState, &mAccess2.OpenState);
+ return gBS->InstallMultipleProtocolInterfaces (&ImageHandle,
+ &gEfiSmmAccess2ProtocolGuid, &mAccess2,
+ NULL);
+}
diff --git a/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.c b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.c
new file mode 100644
index 0000000000..d07d88142a
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.c
@@ -0,0 +1,353 @@
+/** @file
+ A PEIM with the following responsibilities:
+
+ - verify & configure the X58 TSEG in the entry point,
+ - provide SMRAM access by producing PEI_SMM_ACCESS_PPI,
+ - set aside the SMM_S3_RESUME_STATE object at the bottom of TSEG, and expose
+ it via the gEfiAcpiVariableGuid GUID HOB.
+
+ This PEIM runs from RAM, so we can write to variables with static storage
+ duration.
+
+ Copyright (C) 2013, 2015, Red Hat, Inc.<BR>
+ Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include <Guid/AcpiS3Context.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/HobLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PciLib.h>
+#include <Library/PeiServicesLib.h>
+#include <Ppi/SmmAccess.h>
+
+#include <SimicsPlatforms.h>
+
+#include "SmramInternal.h"
+
+//
+// PEI_SMM_ACCESS_PPI implementation.
+//
+
+/**
+ Opens the SMRAM area to be accessible by a PEIM driver.
+
+ This function "opens" SMRAM so that it is visible while not inside of SMM.
+ The function should return EFI_UNSUPPORTED if the hardware does not support
+ hiding of SMRAM. The function should return EFI_DEVICE_ERROR if the SMRAM
+ configuration is locked.
+
+ @param PeiServices General purpose services available to every
+ PEIM.
+ @param This The pointer to the SMM Access Interface.
+ @param DescriptorIndex The region of SMRAM to Open.
+
+ @retval EFI_SUCCESS The region was successfully opened.
+ @retval EFI_DEVICE_ERROR The region could not be opened because locked
+ by chipset.
+ @retval EFI_INVALID_PARAMETER The descriptor index was out of bounds.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+SmmAccessPeiOpen (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_SMM_ACCESS_PPI *This,
+ IN UINTN DescriptorIndex
+ )
+{
+ if (DescriptorIndex >= DescIdxCount) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // According to current practice, DescriptorIndex is not considered at all,
+ // beyond validating it.
+ //
+ return SmramAccessOpen (&This->LockState, &This->OpenState);
+}
+
+/**
+ Inhibits access to the SMRAM.
+
+ This function "closes" SMRAM so that it is not visible while outside of SMM.
+ The function should return EFI_UNSUPPORTED if the hardware does not support
+ hiding of SMRAM.
+
+ @param PeiServices General purpose services available to every
+ PEIM.
+ @param This The pointer to the SMM Access Interface.
+ @param DescriptorIndex The region of SMRAM to Close.
+
+ @retval EFI_SUCCESS The region was successfully closed.
+ @retval EFI_DEVICE_ERROR The region could not be closed because
+ locked by chipset.
+ @retval EFI_INVALID_PARAMETER The descriptor index was out of bounds.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+SmmAccessPeiClose (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_SMM_ACCESS_PPI *This,
+ IN UINTN DescriptorIndex
+ )
+{
+ if (DescriptorIndex >= DescIdxCount) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // According to current practice, DescriptorIndex is not considered at all,
+ // beyond validating it.
+ //
+ return SmramAccessClose (&This->LockState, &This->OpenState);
+}
+
+/**
+ Inhibits access to the SMRAM.
+
+ This function prohibits access to the SMRAM region. This function is usually
+ implemented such that it is a write-once operation.
+
+ @param PeiServices General purpose services available to every
+ PEIM.
+ @param This The pointer to the SMM Access Interface.
+ @param DescriptorIndex The region of SMRAM to Close.
+
+ @retval EFI_SUCCESS The region was successfully locked.
+ @retval EFI_DEVICE_ERROR The region could not be locked because at
+ least one range is still open.
+ @retval EFI_INVALID_PARAMETER The descriptor index was out of bounds.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+SmmAccessPeiLock (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_SMM_ACCESS_PPI *This,
+ IN UINTN DescriptorIndex
+ )
+{
+ if (DescriptorIndex >= DescIdxCount) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // According to current practice, DescriptorIndex is not considered at all,
+ // beyond validating it.
+ //
+ return SmramAccessLock (&This->LockState, &This->OpenState);
+}
+
+/**
+ Queries the memory controller for the possible regions that will support
+ SMRAM.
+
+ @param PeiServices General purpose services available to every
+ PEIM.
+ @param This The pointer to the SmmAccessPpi Interface.
+ @param SmramMapSize The pointer to the variable containing size of
+ the buffer to contain the description
+ information.
+ @param SmramMap The buffer containing the data describing the
+ Smram region descriptors.
+
+ @retval EFI_BUFFER_TOO_SMALL The user did not provide a sufficient buffer.
+ @retval EFI_SUCCESS The user provided a sufficiently-sized buffer.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+SmmAccessPeiGetCapabilities (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_SMM_ACCESS_PPI *This,
+ IN OUT UINTN *SmramMapSize,
+ IN OUT EFI_SMRAM_DESCRIPTOR *SmramMap
+ )
+{
+ return SmramAccessGetCapabilities (This->LockState, This->OpenState,
+ SmramMapSize, SmramMap);
+}
+
+//
+// LockState and OpenState will be filled in by the entry point.
+//
+STATIC PEI_SMM_ACCESS_PPI mAccess = {
+ &SmmAccessPeiOpen,
+ &SmmAccessPeiClose,
+ &SmmAccessPeiLock,
+ &SmmAccessPeiGetCapabilities
+};
+
+
+STATIC EFI_PEI_PPI_DESCRIPTOR mPpiList[] = {
+ {
+ EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST,
+ &gPeiSmmAccessPpiGuid, &mAccess
+ }
+};
+
+
+//
+// Utility functions.
+//
+STATIC
+UINT8
+CmosRead8 (
+ IN UINT8 Index
+ )
+{
+ IoWrite8 (0x70, Index);
+ return IoRead8 (0x71);
+}
+
+STATIC
+UINT32
+GetSystemMemorySizeBelow4gb (
+ VOID
+ )
+{
+ UINT32 Cmos0x34;
+ UINT32 Cmos0x35;
+
+ Cmos0x34 = CmosRead8 (0x34);
+ Cmos0x35 = CmosRead8 (0x35);
+
+ return ((Cmos0x35 << 8 | Cmos0x34) << 16) + SIZE_16MB;
+}
+
+
+//
+// Entry point of this driver.
+//
+EFI_STATUS
+EFIAPI
+SmmAccessPeiEntryPoint (
+ IN EFI_PEI_FILE_HANDLE FileHandle,
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ )
+{
+ UINT16 HostBridgeDevId;
+ UINT32 EsmramcVal;
+ UINT32 TopOfLowRam, TopOfLowRamMb;
+ EFI_STATUS Status;
+ UINTN SmramMapSize;
+ EFI_SMRAM_DESCRIPTOR SmramMap[DescIdxCount];
+ VOID *GuidHob;
+
+ //
+ // This module should only be included if SMRAM support is required.
+ //
+ ASSERT (FeaturePcdGet (PcdSmmSmramRequire));
+
+ //
+ // Verify if we're running on a X58 machine type.
+ //
+ HostBridgeDevId = PciRead16 (SIMICS_HOSTBRIDGE_DID);
+ if (HostBridgeDevId != INTEL_ICH10_DEVICE_ID) {
+ DEBUG ((EFI_D_ERROR, "%a: no SMRAM with host bridge DID=0x%04x; only "
+ "DID=0x%04x (X58) is supported\n", __FUNCTION__, HostBridgeDevId,
+ INTEL_ICH10_DEVICE_ID));
+ goto WrongConfig;
+ }
+
+ //
+ // Confirm if QEMU supports SMRAM.
+ //
+ // With no support for it, the ESMRAMC (Extended System Management RAM
+ // Control) register reads as zero. If there is support, the cache-enable
+ // bits are hard-coded as 1 by QEMU.
+ //
+
+ TopOfLowRam = GetSystemMemorySizeBelow4gb ();
+ ASSERT ((TopOfLowRam & (SIZE_1MB - 1)) == 0);
+ TopOfLowRamMb = TopOfLowRam >> 20;
+ DEBUG((EFI_D_ERROR, "TopOfLowRam =0x%x; TopOfLowRamMb =0x%x \n", TopOfLowRam, TopOfLowRamMb));
+
+
+ //
+ // Set Top of Low Usable DRAM.
+ //
+ PciWrite32 (DRAMC_REGISTER_X58(MCH_TOLUD),
+ TopOfLowRam);
+ DEBUG((EFI_D_ERROR, "MCH_TOLUD =0x%x; \n", PciRead32(DRAMC_REGISTER_X58(MCH_TOLUD))));
+
+ //
+ // Set TSEG Memory Base.
+ //
+ EsmramcVal = (TopOfLowRamMb - FixedPcdGet8(PcdX58TsegMbytes)) << MCH_TSEGMB_MB_SHIFT;
+ //
+ // Set TSEG size, and disable TSEG visibility outside of SMM. Note that the
+ // T_EN bit has inverse meaning; when T_EN is set, then TSEG visibility is
+ // *restricted* to SMM.
+ //
+ EsmramcVal &= ~(UINT32)MCH_ESMRAMC_TSEG_MASK;
+ EsmramcVal |= FixedPcdGet8 (PcdX58TsegMbytes) == 8 ? MCH_ESMRAMC_TSEG_8MB :
+ FixedPcdGet8 (PcdX58TsegMbytes) == 2 ? MCH_ESMRAMC_TSEG_2MB :
+ MCH_ESMRAMC_TSEG_1MB;
+ EsmramcVal |= MCH_ESMRAMC_T_EN;
+ PciWrite32(DRAMC_REGISTER_X58(MCH_TSEGMB), EsmramcVal);
+ DEBUG((EFI_D_ERROR, "MCH_TSEGMB =0x%x; \n", PciRead32(DRAMC_REGISTER_X58(MCH_TSEGMB))));
+ DEBUG((EFI_D_ERROR, "MCH_TSEGMB_1 =0x%x; MCH_TSEGMB_2 =0x%x;\n", ((TopOfLowRamMb - FixedPcdGet8(PcdX58TsegMbytes)) << MCH_TSEGMB_MB_SHIFT), EsmramcVal));
+
+ //
+ // Create the GUID HOB and point it to the first SMRAM range.
+ //
+ GetStates (&mAccess.LockState, &mAccess.OpenState);
+ SmramMapSize = sizeof SmramMap;
+ Status = SmramAccessGetCapabilities (mAccess.LockState, mAccess.OpenState,
+ &SmramMapSize, SmramMap);
+ ASSERT_EFI_ERROR (Status);
+
+ DEBUG_CODE_BEGIN ();
+ {
+ UINTN Count;
+ UINTN Idx;
+
+ Count = SmramMapSize / sizeof SmramMap[0];
+ DEBUG ((EFI_D_VERBOSE, "%a: SMRAM map follows, %d entries\n", __FUNCTION__,
+ (INT32)Count));
+ DEBUG ((EFI_D_VERBOSE, "% 20a % 20a % 20a % 20a\n", "PhysicalStart(0x)",
+ "PhysicalSize(0x)", "CpuStart(0x)", "RegionState(0x)"));
+ for (Idx = 0; Idx < Count; ++Idx) {
+ DEBUG ((EFI_D_VERBOSE, "% 20Lx % 20Lx % 20Lx % 20Lx\n",
+ SmramMap[Idx].PhysicalStart, SmramMap[Idx].PhysicalSize,
+ SmramMap[Idx].CpuStart, SmramMap[Idx].RegionState));
+ }
+ }
+ DEBUG_CODE_END ();
+
+ GuidHob = BuildGuidHob (&gEfiAcpiVariableGuid,
+ sizeof SmramMap[DescIdxSmmS3ResumeState]);
+ if (GuidHob == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ CopyMem (GuidHob, &SmramMap[DescIdxSmmS3ResumeState],
+ sizeof SmramMap[DescIdxSmmS3ResumeState]);
+
+ //
+ // We're done. The next step should succeed, but even if it fails, we can't
+ // roll back the above BuildGuidHob() allocation, because PEI doesn't support
+ // releasing memory.
+ //
+ return PeiServicesInstallPpi (mPpiList);
+
+WrongConfig:
+ //
+ // We really don't want to continue in this case.
+ //
+ ASSERT (FALSE);
+ CpuDeadLoop ();
+ return EFI_UNSUPPORTED;
+}
diff --git a/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.c b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.c
new file mode 100644
index 0000000000..898fc25084
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.c
@@ -0,0 +1,199 @@
+/** @file
+ Functions and types shared by the SMM accessor PEI and DXE modules.
+
+ Copyright (C) 2015, Red Hat, Inc.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include <Guid/AcpiS3Context.h>
+#include <IndustryStandard/X58Ich10.h>
+#include <Library/DebugLib.h>
+#include <Library/PciLib.h>
+
+#include "SmramInternal.h"
+
+BOOLEAN gLockState;
+BOOLEAN gOpenState;
+
+/**
+ Read the MCH_SMRAM and ESMRAMC registers, and update the LockState and
+ OpenState fields in the PEI_SMM_ACCESS_PPI / EFI_SMM_ACCESS2_PROTOCOL object,
+ from the D_LCK and T_EN bits.
+
+ PEI_SMM_ACCESS_PPI and EFI_SMM_ACCESS2_PROTOCOL member functions can rely on
+ the LockState and OpenState fields being up-to-date on entry, and they need
+ to restore the same invariant on exit, if they touch the bits in question.
+
+ @param[out] LockState Reflects the D_LCK bit on output; TRUE iff SMRAM is
+ locked.
+ @param[out] OpenState Reflects the inverse of the T_EN bit on output; TRUE
+ iff SMRAM is open.
+**/
+VOID
+GetStates (
+ OUT BOOLEAN *LockState,
+ OUT BOOLEAN *OpenState
+)
+{
+ UINT8 EsmramcVal;
+
+ EsmramcVal = PciRead8(DRAMC_REGISTER_X58(MCH_TSEGMB));
+
+ *OpenState = !(EsmramcVal & MCH_ESMRAMC_T_EN);
+ *LockState = !*OpenState;
+
+ *OpenState = gOpenState;
+ *LockState = gLockState;
+}
+
+//
+// The functions below follow the PEI_SMM_ACCESS_PPI and
+// EFI_SMM_ACCESS2_PROTOCOL member declarations. The PeiServices and This
+// pointers are removed (TSEG doesn't depend on them), and so is the
+// DescriptorIndex parameter (TSEG doesn't support range-wise locking).
+//
+// The LockState and OpenState members that are common to both
+// PEI_SMM_ACCESS_PPI and EFI_SMM_ACCESS2_PROTOCOL are taken and updated in
+// isolation from the rest of the (non-shared) members.
+//
+
+EFI_STATUS
+SmramAccessOpen (
+ OUT BOOLEAN *LockState,
+ OUT BOOLEAN *OpenState
+ )
+{
+
+ //
+ // Open TSEG by clearing T_EN.
+ //
+ PciAnd8(DRAMC_REGISTER_X58(MCH_TSEGMB),
+ (UINT8)((~(UINT32)MCH_ESMRAMC_T_EN) & 0xff));
+
+ gOpenState = TRUE;
+ gLockState = !gOpenState;
+
+ GetStates (LockState, OpenState);
+ if (!*OpenState) {
+ return EFI_DEVICE_ERROR;
+ }
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+SmramAccessClose (
+ OUT BOOLEAN *LockState,
+ OUT BOOLEAN *OpenState
+ )
+{
+ //
+ // Close TSEG by setting T_EN.
+ //
+ PciOr8(DRAMC_REGISTER_X58(MCH_TSEGMB), MCH_ESMRAMC_T_EN);
+
+ gOpenState = FALSE;
+ gLockState = !gOpenState;
+
+ GetStates (LockState, OpenState);
+ if (*OpenState) {
+ return EFI_DEVICE_ERROR;
+ }
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+SmramAccessLock (
+ OUT BOOLEAN *LockState,
+ IN OUT BOOLEAN *OpenState
+ )
+{
+ if (*OpenState) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ //
+ // Close & lock TSEG by setting T_EN and D_LCK.
+ //
+ PciOr8 (DRAMC_REGISTER_X58(MCH_TSEGMB), MCH_ESMRAMC_T_EN);
+
+ gOpenState = FALSE;
+ gLockState = !gOpenState;
+
+ GetStates (LockState, OpenState);
+ if (*OpenState || !*LockState) {
+ return EFI_DEVICE_ERROR;
+ }
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+SmramAccessGetCapabilities (
+ IN BOOLEAN LockState,
+ IN BOOLEAN OpenState,
+ IN OUT UINTN *SmramMapSize,
+ IN OUT EFI_SMRAM_DESCRIPTOR *SmramMap
+ )
+{
+ UINTN OriginalSize;
+ UINT32 TsegMemoryBaseMb, TsegMemoryBase;
+ UINT64 CommonRegionState;
+ UINT8 TsegSizeBits;
+
+ OriginalSize = *SmramMapSize;
+ *SmramMapSize = DescIdxCount * sizeof *SmramMap;
+ if (OriginalSize < *SmramMapSize) {
+ return EFI_BUFFER_TOO_SMALL;
+ }
+
+ //
+ // Read the TSEG Memory Base register.
+ //
+ TsegMemoryBaseMb = PciRead32(DRAMC_REGISTER_X58(MCH_TSEGMB));
+
+ TsegMemoryBaseMb = 0xDF800000;
+
+ TsegMemoryBase = (TsegMemoryBaseMb >> MCH_TSEGMB_MB_SHIFT) << 20;
+
+ //
+ // Precompute the region state bits that will be set for all regions.
+ //
+ CommonRegionState = (OpenState ? EFI_SMRAM_OPEN : EFI_SMRAM_CLOSED) |
+ (LockState ? EFI_SMRAM_LOCKED : 0) |
+ EFI_CACHEABLE;
+
+ //
+ // The first region hosts an SMM_S3_RESUME_STATE object. It is located at the
+ // start of TSEG. We round up the size to whole pages, and we report it as
+ // EFI_ALLOCATED, so that the SMM_CORE stays away from it.
+ //
+ SmramMap[DescIdxSmmS3ResumeState].PhysicalStart = TsegMemoryBase;
+ SmramMap[DescIdxSmmS3ResumeState].CpuStart = TsegMemoryBase;
+ SmramMap[DescIdxSmmS3ResumeState].PhysicalSize =
+ EFI_PAGES_TO_SIZE (EFI_SIZE_TO_PAGES (sizeof (SMM_S3_RESUME_STATE)));
+ SmramMap[DescIdxSmmS3ResumeState].RegionState =
+ CommonRegionState | EFI_ALLOCATED;
+
+ //
+ // Get the TSEG size bits from the ESMRAMC register.
+ //
+ TsegSizeBits = PciRead8 (DRAMC_REGISTER_X58(MCH_TSEGMB)) &
+ MCH_ESMRAMC_TSEG_MASK;
+
+ TsegSizeBits = MCH_ESMRAMC_TSEG_8MB;
+
+ //
+ // The second region is the main one, following the first.
+ //
+ SmramMap[DescIdxMain].PhysicalStart =
+ SmramMap[DescIdxSmmS3ResumeState].PhysicalStart +
+ SmramMap[DescIdxSmmS3ResumeState].PhysicalSize;
+ SmramMap[DescIdxMain].CpuStart = SmramMap[DescIdxMain].PhysicalStart;
+ SmramMap[DescIdxMain].PhysicalSize =
+ (TsegSizeBits == MCH_ESMRAMC_TSEG_8MB ? SIZE_8MB :
+ TsegSizeBits == MCH_ESMRAMC_TSEG_2MB ? SIZE_2MB :
+ SIZE_1MB) - SmramMap[DescIdxSmmS3ResumeState].PhysicalSize;
+ SmramMap[DescIdxMain].RegionState = CommonRegionState;
+
+ return EFI_SUCCESS;
+}
diff --git a/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/Ia32/SecEntry.nasm b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/Ia32/SecEntry.nasm
new file mode 100644
index 0000000000..19ffb6f86d
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/Ia32/SecEntry.nasm
@@ -0,0 +1,45 @@
+; @file
+; Copyright (c) 2006 - 2013 Intel Corporation. All rights reserved. <BR>
+;
+; SPDX-License-Identifier: BSD-2-Clause-Patent
+;
+
+#include <Base.h>
+
+ SECTION .text
+
+extern ASM_PFX(SecCoreStartupWithStack)
+
+;
+; SecCore Entry Point
+;
+; Processor is in flat protected mode
+;
+; @param[in] EAX Initial value of the EAX register (BIST: Built-in Self Test)
+; @param[in] DI 'BP': boot-strap processor, or 'AP': application processor
+; @param[in] EBP Pointer to the start of the Boot Firmware Volume
+;
+; @return None This routine does not return
+;
+global ASM_PFX(_ModuleEntryPoint)
+ASM_PFX(_ModuleEntryPoint):
+
+ ;
+ ; Load temporary RAM stack based on PCDs
+ ;
+ %define SEC_TOP_OF_STACK (FixedPcdGet32 (PcdSimicsSecPeiTempRamBase) + \
+ FixedPcdGet32 (PcdSimicsSecPeiTempRamSize))
+ mov eax, SEC_TOP_OF_STACK
+ mov esp, eax
+ nop
+
+ ;
+ ; Setup parameters and call SecCoreStartupWithStack
+ ; [esp] return address for call
+ ; [esp+4] BootFirmwareVolumePtr
+ ; [esp+8] TopOfCurrentStack
+ ;
+ push eax
+ push ebp
+ call ASM_PFX(SecCoreStartupWithStack)
+
diff --git a/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.inf b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.inf
new file mode 100644
index 0000000000..ac993ac1ce
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/SecMain.inf
@@ -0,0 +1,71 @@
+## @file
+# SEC Driver
+#
+# Copyright (c) 2008 - 2018 Intel Corporation. All rights reserved. <BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = SecMain
+ FILE_GUID = e67f156f-54c5-47f3-a35d-07c045881e14
+ MODULE_TYPE = SEC
+ VERSION_STRING = 1.0
+ ENTRY_POINT = SecMain
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 EBC
+#
+
+[Sources]
+ SecMain.c
+
+[Sources.IA32]
+ Ia32/SecEntry.nasm
+
+[Sources.X64]
+ X64/SecEntry.nasm
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+ SimicsOpenBoardPkg/SimicsOpenBoardPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ BaseMemoryLib
+ PeiServicesLib
+ PcdLib
+ UefiCpuLib
+ DebugAgentLib
+ IoLib
+ PeCoffLib
+ PeCoffGetEntryPointLib
+ PeCoffExtraActionLib
+ ExtractGuidedSectionLib
+ LocalApicLib
+ PciCf8Lib
+
+[Ppis]
+ gEfiTemporaryRamSupportPpiGuid # PPI ALWAYS_PRODUCED
+
+[Pcd]
+ gSimicsX58PkgTokenSpaceGuid.PcdSimicsPeiMemFvBase
+ gSimicsX58PkgTokenSpaceGuid.PcdSimicsPeiMemFvSize
+ gSimicsX58PkgTokenSpaceGuid.PcdSimicsDxeMemFvBase
+ gSimicsX58PkgTokenSpaceGuid.PcdSimicsDxeMemFvSize
+ gSimicsX58PkgTokenSpaceGuid.PcdSimicsSecPageTablesBase
+ gSimicsX58PkgTokenSpaceGuid.PcdSimicsSecPeiTempRamBase
+ gSimicsX58PkgTokenSpaceGuid.PcdSimicsSecPeiTempRamSize
+ gEfiMdePkgTokenSpaceGuid.PcdGuidedExtractHandlerTableAddress
+ gSimicsX58PkgTokenSpaceGuid.PcdGuidedExtractHandlerTableSize
+ gSimicsX58PkgTokenSpaceGuid.PcdSimicsDecompressionScratchEnd
+
+[FeaturePcd]
+ gSimicsX58PkgTokenSpaceGuid.PcdSmmSmramRequire
diff --git a/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/X64/SecEntry.nasm b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/X64/SecEntry.nasm
new file mode 100644
index 0000000000..0eb86ec2ca
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/Override/UefiCpuPkg/SecCore/X64/SecEntry.nasm
@@ -0,0 +1,45 @@
+; @file
+; Copyright (c) 2006 - 2013 Intel Corporation. All rights reserved. <BR>
+;
+; SPDX-License-Identifier: BSD-2-Clause-Patent
+;
+
+#include <Base.h>
+
+DEFAULT REL
+SECTION .text
+
+extern ASM_PFX(SecCoreStartupWithStack)
+
+;
+; SecCore Entry Point
+;
+; Processor is in flat protected mode
+;
+; @param[in] RAX Initial value of the EAX register (BIST: Built-in Self Test)
+; @param[in] DI 'BP': boot-strap processor, or 'AP': application processor
+; @param[in] RBP Pointer to the start of the Boot Firmware Volume
+;
+; @return None This routine does not return
+;
+global ASM_PFX(_ModuleEntryPoint)
+ASM_PFX(_ModuleEntryPoint):
+
+ ;
+ ; Load temporary RAM stack based on PCDs
+ ;
+ %define SEC_TOP_OF_STACK (FixedPcdGet32 (PcdSimicsSecPeiTempRamBase) + \
+ FixedPcdGet32 (PcdSimicsSecPeiTempRamSize))
+ mov rsp, SEC_TOP_OF_STACK
+ nop
+
+ ;
+ ; Setup parameters and call SecCoreStartupWithStack
+ ; rcx: BootFirmwareVolumePtr
+ ; rdx: TopOfCurrentStack
+ ;
+ mov rcx, rbp
+ mov rdx, rsp
+ sub rsp, 0x20
+ call ASM_PFX(SecCoreStartupWithStack)
+
diff --git a/Silicon/Intel/SimicsX58SktPkg/SktPei.dsc b/Silicon/Intel/SimicsX58SktPkg/SktPei.dsc
new file mode 100644
index 0000000000..0be8be4966
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/SktPei.dsc
@@ -0,0 +1,18 @@
+## @file
+# Component description file for the SkyLake SiPkg PEI drivers.
+#
+# Copyright (c) 2017 Intel Corporation. All rights reserved. <BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+ #
+ # SEC Phase modules
+ #
+ $(SKT_PKG)/Override/UefiCpuPkg/SecCore/SecMain.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+ }
+ UefiCpuPkg/ResetVector/Vtf0/Bin/ResetVector.inf
+ UefiCpuPkg/CpuMpPei/CpuMpPei.inf
diff --git a/Silicon/Intel/SimicsX58SktPkg/SktPostMemoryInclude.fdf b/Silicon/Intel/SimicsX58SktPkg/SktPostMemoryInclude.fdf
new file mode 100644
index 0000000000..78eca21a43
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/SktPostMemoryInclude.fdf
@@ -0,0 +1,9 @@
+## @file
+# Component description file for the SkyLake SiPkg DXE drivers.
+#
+# Copyright (c) 2017 Intel Corporation. All rights reserved. <BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
diff --git a/Silicon/Intel/SimicsX58SktPkg/SktPreMemoryInclude.fdf b/Silicon/Intel/SimicsX58SktPkg/SktPreMemoryInclude.fdf
new file mode 100644
index 0000000000..9f037e99d4
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/SktPreMemoryInclude.fdf
@@ -0,0 +1,10 @@
+## @file
+# Component description file for the SkyLake SiPkg PEI drivers.
+#
+# Copyright (c) 2017 Intel Corporation. All rights reserved. <BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+INF UefiCpuPkg/CpuMpPei/CpuMpPei.inf
diff --git a/Silicon/Intel/SimicsX58SktPkg/SktSecInclude.fdf b/Silicon/Intel/SimicsX58SktPkg/SktSecInclude.fdf
new file mode 100644
index 0000000000..596d633cd3
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/SktSecInclude.fdf
@@ -0,0 +1,17 @@
+## @file
+# Component description file for the SkyLake SiPkg PEI drivers.
+#
+# Copyright (c) 2017 Intel Corporation. All rights reserved. <BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+#
+# SEC Phase modules
+#
+# The code in this FV handles the initial firmware startup, and
+# decompresses the PEI and DXE FVs which handles the rest of the boot sequence.
+#
+INF RuleOverride=RESET_SECMAIN USE = IA32 $(SKT_PKG)/Override/UefiCpuPkg/SecCore/SecMain.inf
+INF RuleOverride=RESET_VECTOR USE = IA32 UefiCpuPkg/ResetVector/Vtf0/Bin/ResetVector.inf
diff --git a/Silicon/Intel/SimicsX58SktPkg/SktUefiBootInclude.fdf b/Silicon/Intel/SimicsX58SktPkg/SktUefiBootInclude.fdf
new file mode 100644
index 0000000000..9004b9cb83
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/SktUefiBootInclude.fdf
@@ -0,0 +1,16 @@
+## @file
+# Component description file for the SkyLake SiPkg DXE drivers.
+#
+# Copyright (c) 2017 Intel Corporation. All rights reserved. <BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+#INF $(SKT_PKG)/Override/IA32FamilyCpuPkg/CpuArchDxe/CpuArchDxe.inf
+#INF $(SKT_PKG)/Override/IA32FamilyCpuPkg/CpuMpDxe/CpuMpDxe.inf
+!if gMinPlatformPkgTokenSpaceGuid.PcdBootToShellOnly == FALSE
+ INF $(SKT_PKG)/Smm/Access/SmmAccess2Dxe.inf
+ INF UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
+!endif
+INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
diff --git a/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.inf b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.inf
new file mode 100644
index 0000000000..2f630b4b95
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccess2Dxe.inf
@@ -0,0 +1,52 @@
+## @file
+# A DXE_DRIVER providing SMRAM access by producing EFI_SMM_ACCESS2_PROTOCOL.
+#
+# X58 TSEG is expected to have been verified and set up by the SmmAccessPei
+# driver.
+#
+# Copyright (C) 2013, 2015, Red Hat, Inc.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = SmmAccess2Dxe
+ FILE_GUID = AC95AD3D-4366-44BF-9A62-E4B29D7A2206
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ PI_SPECIFICATION_VERSION = 0x00010400
+ ENTRY_POINT = SmmAccess2DxeEntryPoint
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64
+#
+
+[Sources]
+ SmmAccess2Dxe.c
+ SmramInternal.c
+ SmramInternal.h
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ SimicsOpenBoardPkg/SimicsOpenBoardPkg.dec
+
+[LibraryClasses]
+ DebugLib
+ PcdLib
+ PciLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+
+[Protocols]
+ gEfiSmmAccess2ProtocolGuid ## PRODUCES
+
+[FeaturePcd]
+ gSimicsX58PkgTokenSpaceGuid.PcdSmmSmramRequire
+
+[Depex]
+ TRUE
diff --git a/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.inf b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.inf
new file mode 100644
index 0000000000..1d3b028c85
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmmAccessPei.inf
@@ -0,0 +1,64 @@
+## @file
+# A PEIM with the following responsibilities:
+#
+# - provide SMRAM access by producing PEI_SMM_ACCESS_PPI,
+# - verify & configure the X58 TSEG in the entry point,
+# - set aside the SMM_S3_RESUME_STATE object at the bottom of TSEG, and expose
+# it via the gEfiAcpiVariableGuid GUIDed HOB.
+#
+# Copyright (C) 2013, 2015, Red Hat, Inc.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = SmmAccessPei
+ FILE_GUID = 6C0E75B4-B0B9-44D1-8210-3377D7B4E066
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+ ENTRY_POINT = SmmAccessPeiEntryPoint
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64
+#
+
+[Sources]
+ SmmAccessPei.c
+ SmramInternal.c
+ SmramInternal.h
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ SimicsOpenBoardPkg/SimicsOpenBoardPkg.dec
+ OvmfPkg/OvmfPkg.dec
+
+[Guids]
+ gEfiAcpiVariableGuid
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ DebugLib
+ HobLib
+ IoLib
+ PcdLib
+ PciLib
+ PeiServicesLib
+ PeimEntryPoint
+
+[FeaturePcd]
+ gSimicsX58PkgTokenSpaceGuid.PcdSmmSmramRequire
+
+[FixedPcd]
+ gSimicsX58PkgTokenSpaceGuid.PcdX58TsegMbytes
+
+[Ppis]
+ gPeiSmmAccessPpiGuid ## PRODUCES
+
+[Depex]
+ gEfiPeiMemoryDiscoveredPpiGuid
diff --git a/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.h b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.h
new file mode 100644
index 0000000000..43a79b295f
--- /dev/null
+++ b/Silicon/Intel/SimicsX58SktPkg/Smm/Access/SmramInternal.h
@@ -0,0 +1,81 @@
+/** @file
+ Functions and types shared by the SMM accessor PEI and DXE modules.
+
+ Copyright (C) 2015, Red Hat, Inc.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include <Pi/PiMultiPhase.h>
+
+//
+// We'll have two SMRAM ranges.
+//
+// The first is a tiny one that hosts an SMM_S3_RESUME_STATE object, to be
+// filled in by the CPU SMM driver during normal boot, for the PEI instance of
+// the LockBox library (which will rely on the object during S3 resume).
+//
+// The other SMRAM range is the main one, for the SMM core and the SMM drivers.
+//
+typedef enum {
+ DescIdxSmmS3ResumeState = 0,
+ DescIdxMain = 1,
+ DescIdxCount = 2
+} DESCRIPTOR_INDEX;
+
+/**
+ Read the MCH_SMRAM and ESMRAMC registers, and update the LockState and
+ OpenState fields in the PEI_SMM_ACCESS_PPI / EFI_SMM_ACCESS2_PROTOCOL object,
+ from the D_LCK and T_EN bits.
+
+ PEI_SMM_ACCESS_PPI and EFI_SMM_ACCESS2_PROTOCOL member functions can rely on
+ the LockState and OpenState fields being up-to-date on entry, and they need
+ to restore the same invariant on exit, if they touch the bits in question.
+
+ @param[out] LockState Reflects the D_LCK bit on output; TRUE iff SMRAM is
+ locked.
+ @param[out] OpenState Reflects the inverse of the T_EN bit on output; TRUE
+ iff SMRAM is open.
+**/
+VOID
+GetStates (
+ OUT BOOLEAN *LockState,
+ OUT BOOLEAN *OpenState
+ );
+
+//
+// The functions below follow the PEI_SMM_ACCESS_PPI and
+// EFI_SMM_ACCESS2_PROTOCOL member declarations. The PeiServices and This
+// pointers are removed (TSEG doesn't depend on them), and so is the
+// DescriptorIndex parameter (TSEG doesn't support range-wise locking).
+//
+// The LockState and OpenState members that are common to both
+// PEI_SMM_ACCESS_PPI and EFI_SMM_ACCESS2_PROTOCOL are taken and updated in
+// isolation from the rest of the (non-shared) members.
+//
+
+EFI_STATUS
+SmramAccessOpen (
+ OUT BOOLEAN *LockState,
+ OUT BOOLEAN *OpenState
+ );
+
+EFI_STATUS
+SmramAccessClose (
+ OUT BOOLEAN *LockState,
+ OUT BOOLEAN *OpenState
+ );
+
+EFI_STATUS
+SmramAccessLock (
+ OUT BOOLEAN *LockState,
+ IN OUT BOOLEAN *OpenState
+ );
+
+EFI_STATUS
+SmramAccessGetCapabilities (
+ IN BOOLEAN LockState,
+ IN BOOLEAN OpenState,
+ IN OUT UINTN *SmramMapSize,
+ IN OUT EFI_SMRAM_DESCRIPTOR *SmramMap
+ );
--
2.16.2.windows.1
next prev parent reply other threads:[~2019-08-15 8:34 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-09 22:46 [edk2-platform patch 0/7] Add Initial QSP MinPlatform Pkg for SIMICS David Wei
2019-08-09 22:46 ` [edk2-platform patch 1/7] SimicsX58SktPkg: Add CPU Pkg for SimicsX58 David Wei
2019-08-15 8:34 ` Nate DeSimone [this message]
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-22 22:31 ` David Wei
2019-08-26 22:48 ` Kubacki, Michael A
2019-08-09 22:46 ` [edk2-platform patch 2/7] SimicsICH10Pkg: Add PCH Pkg for SimicsICH10 David Wei
2019-08-13 2:01 ` Nate DeSimone
2019-08-15 8:39 ` Nate DeSimone
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-23 16:40 ` David Wei
2019-08-26 22:49 ` Kubacki, Michael A
2019-08-09 22:46 ` [edk2-platform patch 3/7] SimicsOpenBoardPkg: Add SimicsOpenBoardPkg and its modules David Wei
2019-08-15 18:35 ` Nate DeSimone
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-23 16:57 ` David Wei
2019-08-26 23:13 ` Kubacki, Michael A
2019-08-09 22:46 ` [edk2-platform patch 4/7] SimicsOpenBoardPkg: Add DXE driver for Legacy Sio David Wei
2019-08-15 19:01 ` Nate DeSimone
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-09 22:46 ` [edk2-platform patch 5/7] SimicsOpenBoardPkg: Add Overrides modules for SIMICS QSP Platform David Wei
2019-08-15 19:38 ` Nate DeSimone
2019-08-15 22:28 ` Nate DeSimone
2019-08-15 22:52 ` Nate DeSimone
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-23 17:09 ` David Wei
2019-08-26 22:51 ` Kubacki, Michael A
2019-08-09 22:46 ` [edk2-platform patch 6/7] SimicsOpenBoardPkg: Add board module for QSP Build tip David Wei
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-23 17:04 ` David Wei
2019-08-26 22:59 ` Kubacki, Michael A
2019-08-09 22:46 ` [edk2-platform patch 7/7] Platform/Intel: Add build option for SIMICS QSP Platform David Wei
2019-08-15 19:28 ` Nate DeSimone
2019-08-19 23:21 ` Nate DeSimone
2019-08-20 1:04 ` Kubacki, Michael A
2019-08-23 17:06 ` David Wei
2019-08-26 23:00 ` Kubacki, Michael A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=02A34F284D1DA44BB705E61F7180EF0AAEE07398@ORSMSX114.amr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox