From: "gaoliming" <gaoliming@byosoft.com.cn>
To: "'xueshengfeng'" <xueshengfeng@byosoft.com.cn>,
<devel@edk2.groups.io>, <jian.j.wang@intel.com>
Cc: <heinrich.schuchardt@canonical.com>, <edhaya.chandran@arm.com>,
<samer.el-haj-mahmoud@arm.com>, "'lijun10x'" <junx1.li@intel.com>,
"'Sunny Wang'" <sunny.wang@arm.com>
Subject: 回复: [PATCH] MdeModulePkg/Library: PcdAcpiS3Enable set FALSE cause Assert
Date: Wed, 15 Feb 2023 13:55:35 +0800 [thread overview]
Message-ID: <048701d94102$1f80e020$5e82a060$@byosoft.com.cn> (raw)
In-Reply-To: <000001d940f4$7a5a5ac0$6f0f1040$@byosoft.com.cn>
Xueshengfeng:
Create PR https://github.com/tianocore/edk2/pull/4047 for this patch.
Thanks
Liming
> -----邮件原件-----
> 发件人: xueshengfeng <xueshengfeng@byosoft.com.cn>
> 发送时间: 2023年2月15日 12:18
> 收件人: 'gaoliming' <gaoliming@byosoft.com.cn>; devel@edk2.groups.io;
> jian.j.wang@intel.com
> 抄送: heinrich.schuchardt@canonical.com; edhaya.chandran@arm.com;
> samer.el-haj-mahmoud@arm.com; 'lijun10x' <junx1.li@intel.com>; 'Sunny
> Wang' <sunny.wang@arm.com>
> 主题: 答复: [PATCH] MdeModulePkg/Library: PcdAcpiS3Enable set FALSE
> cause Assert
>
> Hi Liming,
>
> Yes, it is good to us if catch this stable tag 202302.
> Thank you very much
>
> -----邮件原件-----
> 发件人: gaoliming [mailto:gaoliming@byosoft.com.cn]
> 发送时间: 2023年2月15日 11:59
> 收件人: 'xueshengfeng'; devel@edk2.groups.io; jian.j.wang@intel.com
> 抄送: heinrich.schuchardt@canonical.com; edhaya.chandran@arm.com;
> samer.el-haj-mahmoud@arm.com; 'lijun10x'; 'Sunny Wang'
> 主题: 回复: [PATCH] MdeModulePkg/Library: PcdAcpiS3Enable set FALSE
> cause Assert
>
> Xueshengfeng:
> This patch is good to me. Reviewed-by: Liming Gao
> <gaoliming@byosoft.com.cn>
>
> Does this patch plan to catch this stable tag 202302?
>
> Thanks
> Liming
> > -----邮件原件-----
> > 发件人: xueshengfeng <xueshengfeng@byosoft.com.cn>
> > 发送时间: 2023年2月2日 14:21
> > 收件人: devel@edk2.groups.io; jian.j.wang@intel.com;
> > gaoliming@byosoft.com.cn
> > 抄送: heinrich.schuchardt@canonical.com; edhaya.chandran@arm.com;
> > samer.el-haj-mahmoud@arm.com; lijun10x <junx1.li@intel.com>; Sunny
> > Wang <sunny.wang@arm.com>
> > 主题: [PATCH] MdeModulePkg/Library: PcdAcpiS3Enable set FALSE cause
> > Assert
> >
> > From: lijun10x <junx1.li@intel.com>
> >
> > Some platforms don't support S3 with PcdAcpiS3Enable set as False.
> > Debug mode bios will ASSERT at this time as Follows.
> > ASSERT_RETURN_ERROR (Status = Out of Resources)
> > DXE_ASSERT!:
> > Edk2\MdePkg\Library\BaseS3PciSegmentLib\S3PciSegmentLib.c
> > (61): !(((INTN)(RETURN_STATUS)(Status)) < 0)
> >
> > Steps to reproduce the issue:
> > 1.Set PcdAcpiS3Enable to FALSE.
> > 2.Build the bios in debug mode.
> > 3.Power on and Check the serial log.
> > Note: Prerequisite is that S3PciSegmentLib is Called and
> > the caller's code is run.
> >
> > Root Cause:
> > S3PciSegmentLib call S3BootScriptLib controlled by PcdAcpiS3Enable.
> > If PcdAcpiS3Enable set as false, S3BootScriptLib will return error
> > status(Out of Resources).
> > S3PciSegmentLib will ASSERT if S3BootScriptLib return error.
> >
> > Solution:
> > Make S3BootScriptLib return success if PcdAcpiS3Enable was disabled,
> > which behave as a null S3BootScriptLib instance which just return success
> > for no action is required to do.
> >
> > Signed-off-by: JunX1 Li <junx1.li@intel.com>
> > Cc: Liming Gao <gaoliming@byosoft.com.cn>
> > Cc: Sunny Wang <sunny.wang@arm.com>
> > Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
> > Cc: G Edhaya Chandran <edhaya.chandran@arm.com>
> > Cc: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@arm.com>
> > ---
> > .../PiDxeS3BootScriptLib/BootScriptSave.c | 132
> ++++++++++++++----
> > 1 file changed, 108 insertions(+), 24 deletions(-)
> >
> > diff --git a/MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptSave.c
> > b/MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptSave.c
> > index f8d4983d81..b9b8562f14 100644
> > --- a/MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptSave.c
> > +++ b/MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptSave.c
> > @@ -1004,7 +1004,7 @@ S3BootScriptCloseTable (
> > @param Buffer The source buffer from which to write data.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> > **/
> > RETURN_STATUS
> > EFIAPI
> > @@ -1021,6 +1021,10 @@ S3BootScriptSaveIoWrite (
> > UINT8 WidthInByte;
> > EFI_BOOT_SCRIPT_IO_WRITE ScriptIoWrite;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > WidthInByte = (UINT8)(0x01 << (Width & 0x03));
> >
> > //
> > @@ -1064,7 +1068,7 @@ S3BootScriptSaveIoWrite (
> > @param DataMask A pointer to the data mask to be AND-ed with the
> > data read from the register
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> > **/
> > RETURN_STATUS
> > EFIAPI
> > @@ -1080,6 +1084,10 @@ S3BootScriptSaveIoReadWrite (
> > UINT8 WidthInByte;
> > EFI_BOOT_SCRIPT_IO_READ_WRITE ScriptIoReadWrite;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > WidthInByte = (UINT8)(0x01 << (Width & 0x03));
> > Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_IO_READ_WRITE) +
> > (WidthInByte * 2));
> >
> > @@ -1114,7 +1122,7 @@ S3BootScriptSaveIoReadWrite (
> > @param Buffer The source buffer from which to write the data.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> > **/
> > RETURN_STATUS
> > EFIAPI
> > @@ -1130,6 +1138,10 @@ S3BootScriptSaveMemWrite (
> > UINT8 WidthInByte;
> > EFI_BOOT_SCRIPT_MEM_WRITE ScriptMemWrite;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > WidthInByte = (UINT8)(0x01 << (Width & 0x03));
> >
> > //
> > @@ -1174,7 +1186,7 @@ S3BootScriptSaveMemWrite (
> > @param DataMask A pointer to the data mask to be AND-ed with the
> > data read from the register.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> > **/
> > RETURN_STATUS
> > EFIAPI
> > @@ -1190,6 +1202,10 @@ S3BootScriptSaveMemReadWrite (
> > UINT8 WidthInByte;
> > EFI_BOOT_SCRIPT_MEM_READ_WRITE ScriptMemReadWrite;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > WidthInByte = (UINT8)(0x01 << (Width & 0x03));
> > Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_MEM_READ_WRITE)
> +
> > (WidthInByte * 2));
> >
> > @@ -1224,7 +1240,7 @@ S3BootScriptSaveMemReadWrite (
> > @param Buffer The source buffer from which to write the data.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> > @note A known Limitations in the implementation which is 64bits
> > operations are not supported.
> >
> > **/
> > @@ -1242,6 +1258,10 @@ S3BootScriptSavePciCfgWrite (
> > UINT8 WidthInByte;
> > EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE ScriptPciWrite;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > if ((Width == S3BootScriptWidthUint64) ||
> > (Width == S3BootScriptWidthFifoUint64) ||
> > (Width == S3BootScriptWidthFillUint64))
> > @@ -1293,7 +1313,7 @@ S3BootScriptSavePciCfgWrite (
> > @param DataMask A pointer to the data mask to be AND-ed.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN__SUCCESS Opcode is added.
> > + @retval RETURN__SUCCESS Opcode is added or no action
> is
> > required as ACPI S3 was disabled.
> > @note A known Limitations in the implementation which is 64bits
> > operations are not supported.
> >
> > **/
> > @@ -1311,6 +1331,10 @@ S3BootScriptSavePciCfgReadWrite (
> > UINT8 WidthInByte;
> > EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE ScriptPciReadWrite;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > if ((Width == S3BootScriptWidthUint64) ||
> > (Width == S3BootScriptWidthFifoUint64) ||
> > (Width == S3BootScriptWidthFillUint64))
> > @@ -1357,7 +1381,7 @@ S3BootScriptSavePciCfgReadWrite (
> > @param Buffer The source buffer from which to write the data.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> > @note A known Limitations in the implementation which is 64bits
> > operations are not supported.
> >
> > **/
> > @@ -1376,6 +1400,10 @@ S3BootScriptSavePciCfg2Write (
> > UINT8 WidthInByte;
> > EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE ScriptPciWrite2;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > if ((Width == S3BootScriptWidthUint64) ||
> > (Width == S3BootScriptWidthFifoUint64) ||
> > (Width == S3BootScriptWidthFillUint64))
> > @@ -1429,7 +1457,7 @@ S3BootScriptSavePciCfg2Write (
> > @param DataMask A pointer to the data mask to be AND-ed.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> > @note A known Limitations in the implementation which is 64bits
> > operations are not supported.
> >
> > **/
> > @@ -1448,6 +1476,10 @@ S3BootScriptSavePciCfg2ReadWrite (
> > UINT8 WidthInByte;
> > EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE
> ScriptPciReadWrite2;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > if ((Width == S3BootScriptWidthUint64) ||
> > (Width == S3BootScriptWidthFifoUint64) ||
> > (Width == S3BootScriptWidthFillUint64))
> > @@ -1601,7 +1633,7 @@ CheckParameters (
> > @param Buffer Contains the value of data to execute to the
> > SMBUS slave device.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> > **/
> > RETURN_STATUS
> > EFIAPI
> > @@ -1618,6 +1650,10 @@ S3BootScriptSaveSmbusExecute (
> > UINT8 *Script;
> > EFI_BOOT_SCRIPT_SMBUS_EXECUTE ScriptSmbusExecute;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > if (Length == NULL) {
> > BufferLength = 0;
> > } else {
> > @@ -1670,7 +1706,7 @@ S3BootScriptSaveSmbusExecute (
> > @param Duration Duration in microseconds of the stall
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> > **/
> > RETURN_STATUS
> > EFIAPI
> > @@ -1682,6 +1718,10 @@ S3BootScriptSaveStall (
> > UINT8 *Script;
> > EFI_BOOT_SCRIPT_STALL ScriptStall;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_STALL));
> >
> > Script = S3BootScriptGetEntryAddAddress (Length);
> > @@ -1710,7 +1750,7 @@ S3BootScriptSaveStall (
> > @param Context Argument to be passed into the EntryPoint of
> the
> > code to be dispatched.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> > **/
> > RETURN_STATUS
> > EFIAPI
> > @@ -1723,6 +1763,10 @@ S3BootScriptSaveDispatch2 (
> > UINT8 *Script;
> > EFI_BOOT_SCRIPT_DISPATCH_2 ScriptDispatch2;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_DISPATCH_2));
> >
> > Script = S3BootScriptGetEntryAddAddress (Length);
> > @@ -1762,7 +1806,7 @@ S3BootScriptSaveDispatch2 (
> > @param LoopTimes The times of the register polling.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> >
> > **/
> > RETURN_STATUS
> > @@ -1781,6 +1825,10 @@ S3BootScriptSaveMemPoll (
> > UINT8 WidthInByte;
> > EFI_BOOT_SCRIPT_MEM_POLL ScriptMemPoll;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > WidthInByte = (UINT8)(0x01 << (Width & 0x03));
> >
> > Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_MEM_POLL) +
> (WidthInByte
> > * 2));
> > @@ -1817,7 +1865,7 @@ S3BootScriptSaveMemPoll (
> > @param Information Information to be logged in the boot
> scrpit
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> >
> > **/
> > RETURN_STATUS
> > @@ -1831,6 +1879,10 @@ S3BootScriptSaveInformation (
> > UINT8 *Script;
> > EFI_BOOT_SCRIPT_INFORMATION ScriptInformation;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > //
> > // Truncation check
> > //
> > @@ -1868,7 +1920,7 @@ S3BootScriptSaveInformation (
> > @param String The string to save to boot script table
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> >
> > **/
> > RETURN_STATUS
> > @@ -1889,7 +1941,7 @@ S3BootScriptSaveInformationAsciiString (
> > @param EntryPoint Entry point of the code to be dispatched.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> > **/
> > RETURN_STATUS
> > EFIAPI
> > @@ -1901,6 +1953,10 @@ S3BootScriptSaveDispatch (
> > UINT8 *Script;
> > EFI_BOOT_SCRIPT_DISPATCH ScriptDispatch;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_DISPATCH));
> >
> > Script = S3BootScriptGetEntryAddAddress (Length);
> > @@ -1935,7 +1991,7 @@ S3BootScriptSaveDispatch (
> > granularity so the delay may be
> > longer.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> >
> > **/
> > RETURN_STATUS
> > @@ -1953,6 +2009,10 @@ S3BootScriptSaveIoPoll (
> > UINT8 Length;
> > EFI_BOOT_SCRIPT_IO_POLL ScriptIoPoll;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > WidthInByte = (UINT8)(0x01 << (Width & 0x03));
> > Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_IO_POLL) +
> > (WidthInByte * 2));
> >
> > @@ -1992,7 +2052,7 @@ S3BootScriptSaveIoPoll (
> > granularity so the delay may be
> > longer.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> > @note A known Limitations in the implementation which is 64bits
> > operations are not supported.
> >
> > **/
> > @@ -2011,6 +2071,10 @@ S3BootScriptSavePciPoll (
> > UINT8 Length;
> > EFI_BOOT_SCRIPT_PCI_CONFIG_POLL ScriptPciPoll;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > if ((Width == S3BootScriptWidthUint64) ||
> > (Width == S3BootScriptWidthFifoUint64) ||
> > (Width == S3BootScriptWidthFillUint64))
> > @@ -2058,7 +2122,7 @@ S3BootScriptSavePciPoll (
> > granularity so the delay may be
> > longer.
> >
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> > @note A known Limitations in the implementation which is 64bits
> > operations are not supported.
> >
> > **/
> > @@ -2078,6 +2142,10 @@ S3BootScriptSavePci2Poll (
> > UINT8 Length;
> > EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL ScriptPci2Poll;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > if ((Width == S3BootScriptWidthUint64) ||
> > (Width == S3BootScriptWidthFifoUint64) ||
> > (Width == S3BootScriptWidthFillUint64))
> > @@ -2192,7 +2260,7 @@ S3BootScriptCalculateInsertAddress (
> >
> > @retval RETURN_OUT_OF_RESOURCES The table is not available.
> > @retval RETURN_INVALID_PARAMETER The Position is not a valid
> > position in the boot script table.
> > - @retval RETURN_SUCCESS Opcode is inserted.
> > + @retval RETURN_SUCCESS Opcode is inserted no action is
> > required as ACPI S3 was disabled.
> > **/
> > RETURN_STATUS
> > EFIAPI
> > @@ -2210,6 +2278,10 @@ S3BootScriptMoveLastOpcode (
> > UINT8 *LastOpcode;
> > UINT8
> > TempBootScriptEntry[BOOT_SCRIPT_NODE_MAX_LENGTH];
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > ValidatePosition = FALSE;
> > TempPosition = (Position == NULL) ? NULL : (*Position);
> >
> > @@ -2297,7 +2369,7 @@ S3BootScriptMoveLastOpcode (
> >
> > @retval RETURN_INVALID_PARAMETER The Position is not a valid
> > position in the boot script table.
> > @retval RETURN_OUT_OF_RESOURCES Not enough memory for the
> > table do operation.
> > - @retval RETURN_SUCCESS Opcode is added.
> > + @retval RETURN_SUCCESS Opcode is added or no action is
> > required as ACPI S3 was disabled.
> >
> > **/
> > RETURN_STATUS
> > @@ -2313,6 +2385,10 @@ S3BootScriptLabelInternal (
> > UINT8 *Script;
> > EFI_BOOT_SCRIPT_INFORMATION ScriptInformation;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > //
> > // Truncation check
> > //
> > @@ -2357,8 +2433,8 @@ S3BootScriptLabelInternal (
> > of the inserted opcode in the boot
> > script table.
> > @param Label Points to the label which will be
> > inserted in the boot script table.
> >
> > - @retval EFI_SUCCESS The operation succeeded. A record
> > was added into the
> > - specified script table.
> > + @retval EFI_SUCCESS The operation succeeded or no
> action
> > is required.
> > + A record was added into the
> > specified script table if ACPI S3 was enabled.
> > @retval EFI_INVALID_PARAMETER The parameter is illegal or the given
> > boot script is not supported.
> > If the opcode is unknow or not
> > supported because of the PCD
> > Feature Flags.
> > @@ -2381,6 +2457,10 @@ S3BootScriptLabel (
> > EFI_BOOT_SCRIPT_TABLE_HEADER TableHeader;
> > UINT32 LabelLength;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > //
> > // Check NULL Label
> > //
> > @@ -2443,8 +2523,8 @@ S3BootScriptLabel (
> > @param Position2 The positions in the boot script
> table
> > to compare
> > @param RelativePosition On return, points to the result of the
> > comparison
> >
> > - @retval EFI_SUCCESS The operation succeeded. A record
> > was added into the
> > - specified script table.
> > + @retval EFI_SUCCESS The operation succeeded or no
> action
> > is required.
> > + A record was added into the
> > specified script table if ACPI S3 was enabled.
> > @retval EFI_INVALID_PARAMETER The parameter is illegal or the given
> > boot script is not supported.
> > If the opcode is unknow or not
> > supported because of the PCD
> > Feature Flags.
> > @@ -2462,6 +2542,10 @@ S3BootScriptCompare (
> > UINT8 *Script;
> > UINT32 TableLength;
> >
> > + if (!mS3BootScriptAcpiS3Enable) {
> > + return RETURN_SUCCESS;
> > + }
> > +
> > if (RelativePosition == NULL) {
> > return EFI_INVALID_PARAMETER;
> > }
> > --
> > 2.26.2.windows.1
>
>
prev parent reply other threads:[~2023-02-15 5:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-01 10:01 [PATCH] REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4331 xueshengfeng
2023-02-02 3:22 ` 回复: [edk2-devel] " gaoliming
2023-02-15 3:59 ` 回复: [PATCH] MdeModulePkg/Library: PcdAcpiS3Enable set FALSE cause Assert gaoliming
2023-02-15 4:17 ` xueshengfeng
2023-02-15 5:55 ` gaoliming [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='048701d94102$1f80e020$5e82a060$@byosoft.com.cn' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox