From: "gaoliming" <gaoliming@byosoft.com.cn>
To: <devel@edk2.groups.io>, <pierre.gondois@arm.com>
Cc: "'Sami Mujawar'" <sami.mujawar@arm.com>,
"'Leif Lindholm'" <quic_llindhol@quicinc.com>,
"'Ard Biesheuvel'" <ardb+tianocore@kernel.org>,
"'Rebecca Cran'" <rebecca@bsdio.com>,
"'Michael D Kinney'" <michael.d.kinney@intel.com>,
"'Jiewen Yao'" <jiewen.yao@intel.com>,
"'Jian J Wang'" <jian.j.wang@intel.com>
Subject: 回复: [edk2-devel] [PATCH v8 00/19] Add Raw algorithm support using Arm FW-TRNG interface
Date: Wed, 26 Oct 2022 09:13:06 +0800 [thread overview]
Message-ID: <06a801d8e8d8$1acd45f0$5067d1d0$@byosoft.com.cn> (raw)
In-Reply-To: <3b4d53c4-9dcb-64c0-755f-a206b447b6a4@arm.com>
Pierre:
edk2-stable202211 tag is coming. If this patch plans to catch this stable tag, it needs to pass review before 2022-11-07.
Here is release planning https://github.com/tianocore/tianocore.github.io/wiki/EDK-II-Release-Planning
Thanks
Liming
> -----邮件原件-----
> 发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表
> PierreGondois
> 发送时间: 2022年10月25日 20:32
> 收件人: devel@edk2.groups.io
> 抄送: Sami Mujawar <sami.mujawar@arm.com>; Leif Lindholm
> <quic_llindhol@quicinc.com>; Ard Biesheuvel <ardb+tianocore@kernel.org>;
> Rebecca Cran <rebecca@bsdio.com>; Michael D Kinney
> <michael.d.kinney@intel.com>; Liming Gao <gaoliming@byosoft.com.cn>;
> Jiewen Yao <jiewen.yao@intel.com>; Jian J Wang <jian.j.wang@intel.com>
> 主题: Re: [edk2-devel] [PATCH v8 00/19] Add Raw algorithm support using
> Arm FW-TRNG interface
>
> Hello Jiewen and Jian,
> Does the patch-set look ok for SecurityPkg ?
>
> Regards,
> Pierre
>
> On 10/18/22 15:20, PierreGondois via groups.io wrote:
> > From: Pierre Gondois <pierre.gondois@arm.com>
> >
> > Bugzilla: Bug 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
> >
> > The Arm True Random Number Generator Firmware, Interface 1.0,
> specification
> > defines an interface between an Operating System (OS) executing at EL1
> and
> > Firmware (FW) exposing a conditioned entropy source that is provided by a
> > TRNG back end.
> > This patch-set:
> > - defines a TRNG library class that provides an interface to access the
> > entropy source on a platform.
> > - implements a TRNG library instance that uses the Arm FW-TRNG
> interface.
> > - Adds RawAlgorithm support to RngDxe for Arm architecture using the Arm
> > FW-TRNG interface.
> > - Enables RNG support using FW-TRNG interface for Kvmtool Guest/Virtual
> > firmware.
> >
> > This patch-set is based on the v2 from Sami Mujawar:
> > [PATCH v2 0/8] Add Raw algorithm support using Arm FW-TRNG interface
> > v2:
> > https://edk2.groups.io/g/devel/message/83775
> > v3:
> > https://edk2.groups.io/g/devel/message/90845
> > https://github.com/PierreARM/edk2/tree/Arm_Trng_v3
> > v4:
> > https://github.com/PierreARM/edk2/tree/Arm_Trng_v4
> > v5:
> > https://github.com/PierreARM/edk2/tree/Arm_Trng_v5
> > v6:
> > https://github.com/PierreARM/edk2/tree/Arm_Trng_v6
> > v7:
> > https://github.com/PierreARM/edk2/tree/Arm_Trng_v7
> > v8:
> > https://github.com/PierreARM/edk2/tree/Arm_Trng_v8
> >
> > v8:
> > - Added Reviewed-by/Acked-by from Leif on ArmPkg/SecurityPkg
> > patches. [Leif]
> > - Renamed FID_TRNG_* macros to ARM_SMC_ID_TRNG_*. [Leif]
> > v7:
> > - Removed Reviewed-by from Leif.
> > - Remove Sami's Signed-off.
> > V6:
> > - Added my signed-off on patches authored by Sami. [Leif]
> > - New patch to make it easier to add new libraries in alphabetical
> > order: ArmPkg: Sort HVC/SMC section alphbetically in ArmPkg.dsc
> [Leif]
> > - Renmaed ArmHvcNullLib to ArmHvcLibNull. [Leif]
> > - Added RISCV64 to the list of VALID_ARCHITECTURES for
> BaseTrngLibNull. [Leif]
> > - Removed unnecessary space in function parameter documentation
> > ('[in, out]'). [Rebecca]
> > - Updated INF_VERSION to latest spec (1.29) for new libraries. [Rebecca]
> > - Dropped the following patches [Leif]:
> > - ArmPkg/ArmLib: Add ArmHasRngExt()
> > - ArmPkg/ArmLib: Add ArmReadIdIsar0() helper
> > - MdePkg/BaseRngLib: Rename ArmReadIdIsar0() to ArmGetFeatRng()
> > V5:
> > - Removed references in Trnglib.h to 'Special Publication'
> > 800-90A and 800-90C, and only reference 'Arm True Random
> > Number Generator Firmware, Interface 1.0' in the Arm
> > implementation of the TrngLib. [Jiewen]
> > V4:
> > - Removed dependencies on ArmPkg and dropped patch:
> > [PATCH v3 12/22] SecurityPkg: Update Securitypkg.ci.yaml
> > [Jiewen]
> > - Use a dynamically allocated array to hold available algorithms.
> > The array is freed in a new UNLOAD_IMAGE function and
> > allocated in arch specific implementations of
> > GetAvailableAlgorithms(), available in AArch64/AArch64Algo.c
> > and Arm/ArmAlgo.c.
> > - Correctly reference gEfiRngAlgorithmSp80090Ctr256Guid
> > Guid by copying its address (add missing '&'). [Jiewen]
> > V3:
> > - Address Leif's comment (moving definitions, optimizations, ...)
> > - Add ArmMonitorLib to choose Hvc/Smc conduit depending on a Pcd.
> > - Re-factor some parts of SecurityPkg/RngDxe/ to ease the addition
> > of new algorithms.
> > - Add ArmHasRngExt() function to check Arm's FEAT_RNG extension.
> > V2:
> > - Updates TrngLib definitions to use RETURN_STATUS as the return type
> > from the interface functions as TrngLib is base type library.
> > - Drops the patch "MdePkg: Add definition for NULL GUID" as there is
> > already an equivalent definition provided by gZeroGuid. Thus, the
> > use of gNullGuid has been replaced with gZeroGuid.
> >
> > Pierre Gondois (11):
> > ArmPkg/ArmMonitorLib: Definition for ArmMonitorLib library class
> > ArmPkg/ArmMonitorLib: Add ArmMonitorLib
> > ArmPkg: Sort HVC/SMC section alphbetically in ArmPkg.dsc
> > ArmPkg/ArmHvcLibNull: Add NULL instance of ArmHvcLib
> > SecurityPkg/RngDxe: Replace Pcd with Sp80090Ctr256Guid
> > SecurityPkg/RngDxe: Remove ArchGetSupportedRngAlgorithms()
> > SecurityPkg/RngDxe: Documentation/include/parameter cleanup
> > SecurityPkg/RngDxe: Check before advertising Cpu Rng algo
> > SecurityPkg/RngDxe: Add debug warning for NULL
> > PcdCpuRngSupportedAlgorithm
> > SecurityPkg/RngDxe: Rename AArch64/RngDxe.c
> > SecurityPkg/RngDxe: Add Arm support of RngDxe
> >
> > Sami Mujawar (8):
> > ArmPkg: PCD to select conduit for monitor calls
> > MdePkg/TrngLib: Definition for TRNG library class interface
> > MdePkg/TrngLib: Add NULL instance of TRNG Library
> > ArmPkg: Add FID definitions for Firmware TRNG
> > ArmPkg/TrngLib: Add Arm Firmware TRNG library
> > SecurityPkg/RngDxe: Rename RdRandGenerateEntropy to generic
> name
> > SecurityPkg/RngDxe: Add AArch64 RawAlgorithm support through
> TrngLib
> > ArmVirtPkg: Kvmtool: Add RNG support using FW-TRNG interface
> >
> > ArmPkg/ArmPkg.dec | 12 +-
> > ArmPkg/ArmPkg.dsc | 5 +-
> > ArmPkg/Include/IndustryStandard/ArmStdSmc.h | 109 ++++-
> > ArmPkg/Include/Library/ArmMonitorLib.h | 42 ++
> > ArmPkg/Library/ArmFwTrngLib/ArmFwTrngDefs.h | 50 +++
> > ArmPkg/Library/ArmFwTrngLib/ArmFwTrngLib.c | 388
> ++++++++++++++++++
> > ArmPkg/Library/ArmFwTrngLib/ArmFwTrngLib.inf | 29 ++
> > ArmPkg/Library/ArmHvcLibNull/ArmHvcLibNull.c | 29 ++
> > .../Library/ArmHvcLibNull/ArmHvcLibNull.inf | 22 +
> > ArmPkg/Library/ArmMonitorLib/ArmMonitorLib.c | 34 ++
> > .../Library/ArmMonitorLib/ArmMonitorLib.inf | 29 ++
> > ArmVirtPkg/ArmVirtKvmTool.dsc | 10 +
> > ArmVirtPkg/ArmVirtKvmTool.fdf | 5 +
> > MdePkg/Include/Library/TrngLib.h | 103 +++++
> > .../Library/BaseTrngLibNull/BaseTrngLibNull.c | 117 ++++++
> > .../BaseTrngLibNull/BaseTrngLibNull.inf | 30 ++
> > .../BaseTrngLibNull/BaseTrngLibNull.uni | 12 +
> > MdePkg/MdePkg.dec | 5 +
> > MdePkg/MdePkg.dsc | 1 +
> > .../RngDxe/AArch64/AArch64Algo.c | 72 ++++
> > .../RngDxe/Arm/ArmAlgo.c | 51 +++
> > .../RngDxe/{AArch64/RngDxe.c => ArmRngDxe.c} | 81 +++-
> > .../RandomNumberGenerator/RngDxe/ArmTrng.c | 71 ++++
> > .../RngDxe/Rand/RdRand.c | 14 +-
> > .../RngDxe/Rand/RdRand.h | 43 --
> > .../RngDxe/Rand/RngDxe.c | 62 ++-
> > .../RandomNumberGenerator/RngDxe/RngDxe.c | 90 ++--
> > .../RandomNumberGenerator/RngDxe/RngDxe.inf | 18 +-
> > .../RngDxe/RngDxeInternals.h | 71 ++--
> > SecurityPkg/SecurityPkg.dsc | 5 +-
> > 30 files changed, 1454 insertions(+), 156 deletions(-)
> > create mode 100644 ArmPkg/Include/Library/ArmMonitorLib.h
> > create mode 100644 ArmPkg/Library/ArmFwTrngLib/ArmFwTrngDefs.h
> > create mode 100644 ArmPkg/Library/ArmFwTrngLib/ArmFwTrngLib.c
> > create mode 100644 ArmPkg/Library/ArmFwTrngLib/ArmFwTrngLib.inf
> > create mode 100644 ArmPkg/Library/ArmHvcLibNull/ArmHvcLibNull.c
> > create mode 100644 ArmPkg/Library/ArmHvcLibNull/ArmHvcLibNull.inf
> > create mode 100644 ArmPkg/Library/ArmMonitorLib/ArmMonitorLib.c
> > create mode 100644 ArmPkg/Library/ArmMonitorLib/ArmMonitorLib.inf
> > create mode 100644 MdePkg/Include/Library/TrngLib.h
> > create mode 100644
> MdePkg/Library/BaseTrngLibNull/BaseTrngLibNull.c
> > create mode 100644
> MdePkg/Library/BaseTrngLibNull/BaseTrngLibNull.inf
> > create mode 100644
> MdePkg/Library/BaseTrngLibNull/BaseTrngLibNull.uni
> > create mode 100644
> SecurityPkg/RandomNumberGenerator/RngDxe/AArch64/AArch64Algo.c
> > create mode 100644
> SecurityPkg/RandomNumberGenerator/RngDxe/Arm/ArmAlgo.c
> > rename
> SecurityPkg/RandomNumberGenerator/RngDxe/{AArch64/RngDxe.c =>
> ArmRngDxe.c} (64%)
> > create mode 100644
> SecurityPkg/RandomNumberGenerator/RngDxe/ArmTrng.c
> > delete mode 100644
> SecurityPkg/RandomNumberGenerator/RngDxe/Rand/RdRand.h
> >
>
>
>
>
prev parent reply other threads:[~2022-10-26 1:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <171F2CF84A83B997.20472@groups.io>
2022-10-19 14:45 ` [edk2-devel] [PATCH v8 00/19] Add Raw algorithm support using Arm FW-TRNG interface PierreGondois
2022-10-21 1:13 ` 回复: " gaoliming
2022-10-21 7:29 ` PierreGondois
2022-10-26 1:10 ` 回复: " gaoliming
2022-10-25 12:32 ` PierreGondois
2022-10-26 1:13 ` gaoliming [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='06a801d8e8d8$1acd45f0$5067d1d0$@byosoft.com.cn' \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox