* [PATCH V2] BaseTool/GenC: Fix build error when type is BASE or USER_DEFINED.
@ 2019-02-21 1:37 Jiewen Yao
2019-02-22 2:51 ` Feng, Bob C
0 siblings, 1 reply; 2+ messages in thread
From: Jiewen Yao @ 2019-02-21 1:37 UTC (permalink / raw)
To: edk2-devel; +Cc: Bob Feng, Liming Gao, Yonghong Zhu
https://bugzilla.tianocore.org/show_bug.cgi?id=1544
=====================
V2: (Feedback from Liming) Add filter for 1) below:
Only constructor/destructor with BASE type is included here.
The constructor/destructor with PEI/DXE/SMM type is still excluded
to keep original behavior.
Test: NT32 build and boot successfully.
=====================
1) The GenC tool does not include the constructor/destructor for
USER_DEFINED module. It should be included.
Only constructor/destructor with BASE type is included here.
The constructor/destructor with PEI/DXE/SMM type is still excluded
to keep original behavior.
2) The GenC tool includes the UnloadImage code for BASE module.
It should NOT be included.
3) The GenC tool uses EFI_STATUS and ASSERT_EFI_ERROR for BASE type.
It should use RETURN_STATUS and ASSERT_RETURN_ERROR.
4) The GenC tool miss DebugLib.h for BASE or USER_DEFINED module
AutoGen.c. Only Base.h is there. It should add Library/DebugLib.h.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
---
BaseTools/Source/Python/AutoGen/GenC.py | 56 ++++++++++----------
1 file changed, 29 insertions(+), 27 deletions(-)
diff --git a/BaseTools/Source/Python/AutoGen/GenC.py b/BaseTools/Source/Python/AutoGen/GenC.py
index 9700bf8527..a922464f56 100644
--- a/BaseTools/Source/Python/AutoGen/GenC.py
+++ b/BaseTools/Source/Python/AutoGen/GenC.py
@@ -684,7 +684,7 @@ ${Function} (
gLibraryStructorCall = {
SUP_MODULE_BASE : TemplateString("""${BEGIN}
Status = ${Function} ();
- ASSERT_EFI_ERROR (Status);${END}
+ ASSERT_RETURN_ERROR (Status);${END}
"""),
'PEI' : TemplateString("""${BEGIN}
@@ -714,7 +714,7 @@ ProcessLibrary${Type}List (
VOID
)
{
-${BEGIN} EFI_STATUS Status;
+${BEGIN} RETURN_STATUS Status;
${FunctionCall}${END}
}
"""),
@@ -768,7 +768,7 @@ ${FunctionCall}${END}
gBasicHeaderFile = "Base.h"
gModuleTypeHeaderFile = {
- SUP_MODULE_BASE : [gBasicHeaderFile],
+ SUP_MODULE_BASE : [gBasicHeaderFile, "Library/DebugLib.h"],
SUP_MODULE_SEC : ["PiPei.h", "Library/DebugLib.h"],
SUP_MODULE_PEI_CORE : ["PiPei.h", "Library/DebugLib.h", "Library/PeiCoreEntryPoint.h"],
SUP_MODULE_PEIM : ["PiPei.h", "Library/DebugLib.h", "Library/PeimEntryPoint.h"],
@@ -782,7 +782,7 @@ gModuleTypeHeaderFile = {
SUP_MODULE_SMM_CORE : ["PiDxe.h", "Library/BaseLib.h", "Library/DebugLib.h", "Library/UefiDriverEntryPoint.h"],
SUP_MODULE_MM_STANDALONE : ["PiMm.h", "Library/BaseLib.h", "Library/DebugLib.h", "Library/StandaloneMmDriverEntryPoint.h"],
SUP_MODULE_MM_CORE_STANDALONE : ["PiMm.h", "Library/BaseLib.h", "Library/DebugLib.h", "Library/StandaloneMmCoreEntryPoint.h"],
- SUP_MODULE_USER_DEFINED : [gBasicHeaderFile]
+ SUP_MODULE_USER_DEFINED : [gBasicHeaderFile, "Library/DebugLib.h"]
}
## Autogen internal worker macro to define DynamicEx PCD name includes both the TokenSpaceGuidName
@@ -1345,16 +1345,17 @@ def CreateLibraryConstructorCode(Info, AutoGenC, AutoGenH):
if Lib.ModuleType in [SUP_MODULE_BASE, SUP_MODULE_SEC]:
ConstructorPrototypeString.Append(gLibraryStructorPrototype[SUP_MODULE_BASE].Replace(Dict))
ConstructorCallingString.Append(gLibraryStructorCall[SUP_MODULE_BASE].Replace(Dict))
- elif Lib.ModuleType in SUP_MODULE_SET_PEI:
- ConstructorPrototypeString.Append(gLibraryStructorPrototype['PEI'].Replace(Dict))
- ConstructorCallingString.Append(gLibraryStructorCall['PEI'].Replace(Dict))
- elif Lib.ModuleType in [SUP_MODULE_DXE_CORE, SUP_MODULE_DXE_DRIVER, SUP_MODULE_DXE_SMM_DRIVER, SUP_MODULE_DXE_RUNTIME_DRIVER,
- SUP_MODULE_DXE_SAL_DRIVER, SUP_MODULE_UEFI_DRIVER, SUP_MODULE_UEFI_APPLICATION, SUP_MODULE_SMM_CORE]:
- ConstructorPrototypeString.Append(gLibraryStructorPrototype['DXE'].Replace(Dict))
- ConstructorCallingString.Append(gLibraryStructorCall['DXE'].Replace(Dict))
- elif Lib.ModuleType in [SUP_MODULE_MM_STANDALONE, SUP_MODULE_MM_CORE_STANDALONE]:
- ConstructorPrototypeString.Append(gLibraryStructorPrototype['MM'].Replace(Dict))
- ConstructorCallingString.Append(gLibraryStructorCall['MM'].Replace(Dict))
+ if Info.ModuleType not in [SUP_MODULE_BASE, SUP_MODULE_USER_DEFINED]:
+ if Lib.ModuleType in SUP_MODULE_SET_PEI:
+ ConstructorPrototypeString.Append(gLibraryStructorPrototype['PEI'].Replace(Dict))
+ ConstructorCallingString.Append(gLibraryStructorCall['PEI'].Replace(Dict))
+ elif Lib.ModuleType in [SUP_MODULE_DXE_CORE, SUP_MODULE_DXE_DRIVER, SUP_MODULE_DXE_SMM_DRIVER, SUP_MODULE_DXE_RUNTIME_DRIVER,
+ SUP_MODULE_DXE_SAL_DRIVER, SUP_MODULE_UEFI_DRIVER, SUP_MODULE_UEFI_APPLICATION, SUP_MODULE_SMM_CORE]:
+ ConstructorPrototypeString.Append(gLibraryStructorPrototype['DXE'].Replace(Dict))
+ ConstructorCallingString.Append(gLibraryStructorCall['DXE'].Replace(Dict))
+ elif Lib.ModuleType in [SUP_MODULE_MM_STANDALONE, SUP_MODULE_MM_CORE_STANDALONE]:
+ ConstructorPrototypeString.Append(gLibraryStructorPrototype['MM'].Replace(Dict))
+ ConstructorCallingString.Append(gLibraryStructorCall['MM'].Replace(Dict))
if str(ConstructorPrototypeString) == '':
ConstructorPrototypeList = []
@@ -1373,7 +1374,7 @@ def CreateLibraryConstructorCode(Info, AutoGenC, AutoGenH):
if Info.IsLibrary:
AutoGenH.Append("${BEGIN}${FunctionPrototype}${END}", Dict)
else:
- if Info.ModuleType in [SUP_MODULE_BASE, SUP_MODULE_SEC]:
+ if Info.ModuleType in [SUP_MODULE_BASE, SUP_MODULE_SEC, SUP_MODULE_USER_DEFINED]:
AutoGenC.Append(gLibraryString[SUP_MODULE_BASE].Replace(Dict))
elif Info.ModuleType in SUP_MODULE_SET_PEI:
AutoGenC.Append(gLibraryString['PEI'].Replace(Dict))
@@ -1407,16 +1408,17 @@ def CreateLibraryDestructorCode(Info, AutoGenC, AutoGenH):
if Lib.ModuleType in [SUP_MODULE_BASE, SUP_MODULE_SEC]:
DestructorPrototypeString.Append(gLibraryStructorPrototype[SUP_MODULE_BASE].Replace(Dict))
DestructorCallingString.Append(gLibraryStructorCall[SUP_MODULE_BASE].Replace(Dict))
- elif Lib.ModuleType in SUP_MODULE_SET_PEI:
- DestructorPrototypeString.Append(gLibraryStructorPrototype['PEI'].Replace(Dict))
- DestructorCallingString.Append(gLibraryStructorCall['PEI'].Replace(Dict))
- elif Lib.ModuleType in [SUP_MODULE_DXE_CORE, SUP_MODULE_DXE_DRIVER, SUP_MODULE_DXE_SMM_DRIVER, SUP_MODULE_DXE_RUNTIME_DRIVER,
- SUP_MODULE_DXE_SAL_DRIVER, SUP_MODULE_UEFI_DRIVER, SUP_MODULE_UEFI_APPLICATION, SUP_MODULE_SMM_CORE]:
- DestructorPrototypeString.Append(gLibraryStructorPrototype['DXE'].Replace(Dict))
- DestructorCallingString.Append(gLibraryStructorCall['DXE'].Replace(Dict))
- elif Lib.ModuleType in [SUP_MODULE_MM_STANDALONE, SUP_MODULE_MM_CORE_STANDALONE]:
- DestructorPrototypeString.Append(gLibraryStructorPrototype['MM'].Replace(Dict))
- DestructorCallingString.Append(gLibraryStructorCall['MM'].Replace(Dict))
+ if Info.ModuleType not in [SUP_MODULE_BASE, SUP_MODULE_USER_DEFINED]:
+ if Lib.ModuleType in SUP_MODULE_SET_PEI:
+ DestructorPrototypeString.Append(gLibraryStructorPrototype['PEI'].Replace(Dict))
+ DestructorCallingString.Append(gLibraryStructorCall['PEI'].Replace(Dict))
+ elif Lib.ModuleType in [SUP_MODULE_DXE_CORE, SUP_MODULE_DXE_DRIVER, SUP_MODULE_DXE_SMM_DRIVER, SUP_MODULE_DXE_RUNTIME_DRIVER,
+ SUP_MODULE_DXE_SAL_DRIVER, SUP_MODULE_UEFI_DRIVER, SUP_MODULE_UEFI_APPLICATION, SUP_MODULE_SMM_CORE]:
+ DestructorPrototypeString.Append(gLibraryStructorPrototype['DXE'].Replace(Dict))
+ DestructorCallingString.Append(gLibraryStructorCall['DXE'].Replace(Dict))
+ elif Lib.ModuleType in [SUP_MODULE_MM_STANDALONE, SUP_MODULE_MM_CORE_STANDALONE]:
+ DestructorPrototypeString.Append(gLibraryStructorPrototype['MM'].Replace(Dict))
+ DestructorCallingString.Append(gLibraryStructorCall['MM'].Replace(Dict))
if str(DestructorPrototypeString) == '':
DestructorPrototypeList = []
@@ -1435,7 +1437,7 @@ def CreateLibraryDestructorCode(Info, AutoGenC, AutoGenH):
if Info.IsLibrary:
AutoGenH.Append("${BEGIN}${FunctionPrototype}${END}", Dict)
else:
- if Info.ModuleType in [SUP_MODULE_BASE, SUP_MODULE_SEC]:
+ if Info.ModuleType in [SUP_MODULE_BASE, SUP_MODULE_SEC, SUP_MODULE_USER_DEFINED]:
AutoGenC.Append(gLibraryString[SUP_MODULE_BASE].Replace(Dict))
elif Info.ModuleType in SUP_MODULE_SET_PEI:
AutoGenC.Append(gLibraryString['PEI'].Replace(Dict))
@@ -1533,7 +1535,7 @@ def CreateModuleEntryPointCode(Info, AutoGenC, AutoGenH):
# @param AutoGenH The TemplateString object for header file
#
def CreateModuleUnloadImageCode(Info, AutoGenC, AutoGenH):
- if Info.IsLibrary or Info.ModuleType in [SUP_MODULE_USER_DEFINED, SUP_MODULE_SEC]:
+ if Info.IsLibrary or Info.ModuleType in [SUP_MODULE_USER_DEFINED, SUP_MODULE_BASE, SUP_MODULE_SEC]:
return
#
# Unload Image Handlers
--
2.19.2.windows.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH V2] BaseTool/GenC: Fix build error when type is BASE or USER_DEFINED.
2019-02-21 1:37 [PATCH V2] BaseTool/GenC: Fix build error when type is BASE or USER_DEFINED Jiewen Yao
@ 2019-02-22 2:51 ` Feng, Bob C
0 siblings, 0 replies; 2+ messages in thread
From: Feng, Bob C @ 2019-02-22 2:51 UTC (permalink / raw)
To: Yao, Jiewen, edk2-devel@lists.01.org; +Cc: Gao, Liming, Zhu, Yonghong
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
-----Original Message-----
From: Yao, Jiewen
Sent: Thursday, February 21, 2019 9:38 AM
To: edk2-devel@lists.01.org
Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong <yonghong.zhu@intel.com>
Subject: [PATCH V2] BaseTool/GenC: Fix build error when type is BASE or USER_DEFINED.
https://bugzilla.tianocore.org/show_bug.cgi?id=1544
=====================
V2: (Feedback from Liming) Add filter for 1) below:
Only constructor/destructor with BASE type is included here.
The constructor/destructor with PEI/DXE/SMM type is still excluded to keep original behavior.
Test: NT32 build and boot successfully.
=====================
1) The GenC tool does not include the constructor/destructor for USER_DEFINED module. It should be included.
Only constructor/destructor with BASE type is included here.
The constructor/destructor with PEI/DXE/SMM type is still excluded to keep original behavior.
2) The GenC tool includes the UnloadImage code for BASE module.
It should NOT be included.
3) The GenC tool uses EFI_STATUS and ASSERT_EFI_ERROR for BASE type.
It should use RETURN_STATUS and ASSERT_RETURN_ERROR.
4) The GenC tool miss DebugLib.h for BASE or USER_DEFINED module AutoGen.c. Only Base.h is there. It should add Library/DebugLib.h.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
---
BaseTools/Source/Python/AutoGen/GenC.py | 56 ++++++++++----------
1 file changed, 29 insertions(+), 27 deletions(-)
diff --git a/BaseTools/Source/Python/AutoGen/GenC.py b/BaseTools/Source/Python/AutoGen/GenC.py
index 9700bf8527..a922464f56 100644
--- a/BaseTools/Source/Python/AutoGen/GenC.py
+++ b/BaseTools/Source/Python/AutoGen/GenC.py
@@ -684,7 +684,7 @@ ${Function} (
gLibraryStructorCall = {
SUP_MODULE_BASE : TemplateString("""${BEGIN}
Status = ${Function} ();
- ASSERT_EFI_ERROR (Status);${END}
+ ASSERT_RETURN_ERROR (Status);${END}
"""),
'PEI' : TemplateString("""${BEGIN}
@@ -714,7 +714,7 @@ ProcessLibrary${Type}List (
VOID
)
{
-${BEGIN} EFI_STATUS Status;
+${BEGIN} RETURN_STATUS Status;
${FunctionCall}${END}
}
"""),
@@ -768,7 +768,7 @@ ${FunctionCall}${END} gBasicHeaderFile = "Base.h"
gModuleTypeHeaderFile = {
- SUP_MODULE_BASE : [gBasicHeaderFile],
+ SUP_MODULE_BASE : [gBasicHeaderFile, "Library/DebugLib.h"],
SUP_MODULE_SEC : ["PiPei.h", "Library/DebugLib.h"],
SUP_MODULE_PEI_CORE : ["PiPei.h", "Library/DebugLib.h", "Library/PeiCoreEntryPoint.h"],
SUP_MODULE_PEIM : ["PiPei.h", "Library/DebugLib.h", "Library/PeimEntryPoint.h"],
@@ -782,7 +782,7 @@ gModuleTypeHeaderFile = {
SUP_MODULE_SMM_CORE : ["PiDxe.h", "Library/BaseLib.h", "Library/DebugLib.h", "Library/UefiDriverEntryPoint.h"],
SUP_MODULE_MM_STANDALONE : ["PiMm.h", "Library/BaseLib.h", "Library/DebugLib.h", "Library/StandaloneMmDriverEntryPoint.h"],
SUP_MODULE_MM_CORE_STANDALONE : ["PiMm.h", "Library/BaseLib.h", "Library/DebugLib.h", "Library/StandaloneMmCoreEntryPoint.h"],
- SUP_MODULE_USER_DEFINED : [gBasicHeaderFile]
+ SUP_MODULE_USER_DEFINED : [gBasicHeaderFile, "Library/DebugLib.h"]
}
## Autogen internal worker macro to define DynamicEx PCD name includes both the TokenSpaceGuidName @@ -1345,16 +1345,17 @@ def CreateLibraryConstructorCode(Info, AutoGenC, AutoGenH):
if Lib.ModuleType in [SUP_MODULE_BASE, SUP_MODULE_SEC]:
ConstructorPrototypeString.Append(gLibraryStructorPrototype[SUP_MODULE_BASE].Replace(Dict))
ConstructorCallingString.Append(gLibraryStructorCall[SUP_MODULE_BASE].Replace(Dict))
- elif Lib.ModuleType in SUP_MODULE_SET_PEI:
- ConstructorPrototypeString.Append(gLibraryStructorPrototype['PEI'].Replace(Dict))
- ConstructorCallingString.Append(gLibraryStructorCall['PEI'].Replace(Dict))
- elif Lib.ModuleType in [SUP_MODULE_DXE_CORE, SUP_MODULE_DXE_DRIVER, SUP_MODULE_DXE_SMM_DRIVER, SUP_MODULE_DXE_RUNTIME_DRIVER,
- SUP_MODULE_DXE_SAL_DRIVER, SUP_MODULE_UEFI_DRIVER, SUP_MODULE_UEFI_APPLICATION, SUP_MODULE_SMM_CORE]:
- ConstructorPrototypeString.Append(gLibraryStructorPrototype['DXE'].Replace(Dict))
- ConstructorCallingString.Append(gLibraryStructorCall['DXE'].Replace(Dict))
- elif Lib.ModuleType in [SUP_MODULE_MM_STANDALONE, SUP_MODULE_MM_CORE_STANDALONE]:
- ConstructorPrototypeString.Append(gLibraryStructorPrototype['MM'].Replace(Dict))
- ConstructorCallingString.Append(gLibraryStructorCall['MM'].Replace(Dict))
+ if Info.ModuleType not in [SUP_MODULE_BASE, SUP_MODULE_USER_DEFINED]:
+ if Lib.ModuleType in SUP_MODULE_SET_PEI:
+ ConstructorPrototypeString.Append(gLibraryStructorPrototype['PEI'].Replace(Dict))
+ ConstructorCallingString.Append(gLibraryStructorCall['PEI'].Replace(Dict))
+ elif Lib.ModuleType in [SUP_MODULE_DXE_CORE, SUP_MODULE_DXE_DRIVER, SUP_MODULE_DXE_SMM_DRIVER, SUP_MODULE_DXE_RUNTIME_DRIVER,
+ SUP_MODULE_DXE_SAL_DRIVER, SUP_MODULE_UEFI_DRIVER, SUP_MODULE_UEFI_APPLICATION, SUP_MODULE_SMM_CORE]:
+ ConstructorPrototypeString.Append(gLibraryStructorPrototype['DXE'].Replace(Dict))
+ ConstructorCallingString.Append(gLibraryStructorCall['DXE'].Replace(Dict))
+ elif Lib.ModuleType in [SUP_MODULE_MM_STANDALONE, SUP_MODULE_MM_CORE_STANDALONE]:
+ ConstructorPrototypeString.Append(gLibraryStructorPrototype['MM'].Replace(Dict))
+
+ ConstructorCallingString.Append(gLibraryStructorCall['MM'].Replace(Dic
+ t))
if str(ConstructorPrototypeString) == '':
ConstructorPrototypeList = []
@@ -1373,7 +1374,7 @@ def CreateLibraryConstructorCode(Info, AutoGenC, AutoGenH):
if Info.IsLibrary:
AutoGenH.Append("${BEGIN}${FunctionPrototype}${END}", Dict)
else:
- if Info.ModuleType in [SUP_MODULE_BASE, SUP_MODULE_SEC]:
+ if Info.ModuleType in [SUP_MODULE_BASE, SUP_MODULE_SEC, SUP_MODULE_USER_DEFINED]:
AutoGenC.Append(gLibraryString[SUP_MODULE_BASE].Replace(Dict))
elif Info.ModuleType in SUP_MODULE_SET_PEI:
AutoGenC.Append(gLibraryString['PEI'].Replace(Dict))
@@ -1407,16 +1408,17 @@ def CreateLibraryDestructorCode(Info, AutoGenC, AutoGenH):
if Lib.ModuleType in [SUP_MODULE_BASE, SUP_MODULE_SEC]:
DestructorPrototypeString.Append(gLibraryStructorPrototype[SUP_MODULE_BASE].Replace(Dict))
DestructorCallingString.Append(gLibraryStructorCall[SUP_MODULE_BASE].Replace(Dict))
- elif Lib.ModuleType in SUP_MODULE_SET_PEI:
- DestructorPrototypeString.Append(gLibraryStructorPrototype['PEI'].Replace(Dict))
- DestructorCallingString.Append(gLibraryStructorCall['PEI'].Replace(Dict))
- elif Lib.ModuleType in [SUP_MODULE_DXE_CORE, SUP_MODULE_DXE_DRIVER, SUP_MODULE_DXE_SMM_DRIVER, SUP_MODULE_DXE_RUNTIME_DRIVER,
- SUP_MODULE_DXE_SAL_DRIVER, SUP_MODULE_UEFI_DRIVER, SUP_MODULE_UEFI_APPLICATION, SUP_MODULE_SMM_CORE]:
- DestructorPrototypeString.Append(gLibraryStructorPrototype['DXE'].Replace(Dict))
- DestructorCallingString.Append(gLibraryStructorCall['DXE'].Replace(Dict))
- elif Lib.ModuleType in [SUP_MODULE_MM_STANDALONE, SUP_MODULE_MM_CORE_STANDALONE]:
- DestructorPrototypeString.Append(gLibraryStructorPrototype['MM'].Replace(Dict))
- DestructorCallingString.Append(gLibraryStructorCall['MM'].Replace(Dict))
+ if Info.ModuleType not in [SUP_MODULE_BASE, SUP_MODULE_USER_DEFINED]:
+ if Lib.ModuleType in SUP_MODULE_SET_PEI:
+ DestructorPrototypeString.Append(gLibraryStructorPrototype['PEI'].Replace(Dict))
+ DestructorCallingString.Append(gLibraryStructorCall['PEI'].Replace(Dict))
+ elif Lib.ModuleType in [SUP_MODULE_DXE_CORE, SUP_MODULE_DXE_DRIVER, SUP_MODULE_DXE_SMM_DRIVER, SUP_MODULE_DXE_RUNTIME_DRIVER,
+ SUP_MODULE_DXE_SAL_DRIVER, SUP_MODULE_UEFI_DRIVER, SUP_MODULE_UEFI_APPLICATION, SUP_MODULE_SMM_CORE]:
+ DestructorPrototypeString.Append(gLibraryStructorPrototype['DXE'].Replace(Dict))
+ DestructorCallingString.Append(gLibraryStructorCall['DXE'].Replace(Dict))
+ elif Lib.ModuleType in [SUP_MODULE_MM_STANDALONE, SUP_MODULE_MM_CORE_STANDALONE]:
+ DestructorPrototypeString.Append(gLibraryStructorPrototype['MM'].Replace(Dict))
+
+ DestructorCallingString.Append(gLibraryStructorCall['MM'].Replace(Dict
+ ))
if str(DestructorPrototypeString) == '':
DestructorPrototypeList = []
@@ -1435,7 +1437,7 @@ def CreateLibraryDestructorCode(Info, AutoGenC, AutoGenH):
if Info.IsLibrary:
AutoGenH.Append("${BEGIN}${FunctionPrototype}${END}", Dict)
else:
- if Info.ModuleType in [SUP_MODULE_BASE, SUP_MODULE_SEC]:
+ if Info.ModuleType in [SUP_MODULE_BASE, SUP_MODULE_SEC, SUP_MODULE_USER_DEFINED]:
AutoGenC.Append(gLibraryString[SUP_MODULE_BASE].Replace(Dict))
elif Info.ModuleType in SUP_MODULE_SET_PEI:
AutoGenC.Append(gLibraryString['PEI'].Replace(Dict))
@@ -1533,7 +1535,7 @@ def CreateModuleEntryPointCode(Info, AutoGenC, AutoGenH):
# @param AutoGenH The TemplateString object for header file
#
def CreateModuleUnloadImageCode(Info, AutoGenC, AutoGenH):
- if Info.IsLibrary or Info.ModuleType in [SUP_MODULE_USER_DEFINED, SUP_MODULE_SEC]:
+ if Info.IsLibrary or Info.ModuleType in [SUP_MODULE_USER_DEFINED, SUP_MODULE_BASE, SUP_MODULE_SEC]:
return
#
# Unload Image Handlers
--
2.19.2.windows.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-02-22 2:51 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-02-21 1:37 [PATCH V2] BaseTool/GenC: Fix build error when type is BASE or USER_DEFINED Jiewen Yao
2019-02-22 2:51 ` Feng, Bob C
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox