[patch 0/2] Edk2Setup: Enahnce edk2setup batch files

[patch 0/2] Edk2Setup: Enahnce edk2setup batch files

[Dandan Bi]

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693

Patch 1 remove nt32 related flags in bat files.
Patch 2 setup for different VS tool chains.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Dandan Bi (2):
  Edk2: Remove nt32 related flag in bat files
  Edk2Setup: Support different VS tool chain setup

 BaseTools/get_vsvars.bat        | 42 +++++++++++++++++++++----
 BaseTools/set_vsprefix_envs.bat | 47 +++++++++++++++++++++++++---
 BaseTools/toolsetup.bat         | 68 ++++++++++++++++++++++++++++++++++-------
 edksetup.bat                    | 32 ++++++-------------
 4 files changed, 145 insertions(+), 44 deletions(-)

-- 
1.9.5.msysgit.1

[patch 1/2] Edk2Setup: Remove nt32 related flag in bat files

[Dandan Bi]

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693

NT32Pkg has been removed, remove nt32 related
flags in bat files.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
---
 BaseTools/toolsetup.bat |  8 --------
 edksetup.bat            | 23 +----------------------
 2 files changed, 1 insertion(+), 30 deletions(-)

diff --git a/BaseTools/toolsetup.bat b/BaseTools/toolsetup.bat
index 23dae40..999f3b3 100755
--- a/BaseTools/toolsetup.bat
+++ b/BaseTools/toolsetup.bat
@@ -24,18 +24,10 @@ if /I "%1"=="/help" goto Usage
 if /I "%1"=="/?" goto Usage
 
 
 :loop
   if "%1"=="" goto setup_workspace
-  if /I "%1"=="--nt32" (
-    if /I "%2" == "X64" (
-      shift
-    )
-    @REM Ignore --nt32 flag
-    shift
-    goto loop
-  )
   if /I "%1"=="Reconfig" (
     shift
     set RECONFIG=TRUE
     goto loop
   )
diff --git a/edksetup.bat b/edksetup.bat
index 662ffc0..d607e2e 100755
--- a/edksetup.bat
+++ b/edksetup.bat
@@ -81,22 +81,10 @@ if exist %EDK_BASETOOLS% (
 )
 
 :checkNt32Flag
 if exist %EDK_TOOLS_PATH%\Source set BASE_TOOLS_PATH=%EDK_TOOLS_PATH%
 
-@REM The Nt32 Emulation Platform requires Microsoft Libraries
-@REM and headers to interface with Windows.
-if /I "%1"=="--nt32" (
-  if /I "%2"=="X64" (
-    shift
-    call "%BASE_TOOLS_PATH%\Scripts\SetVisualStudio.bat"
-  ) else (
-    call "%BASE_TOOLS_PATH%\get_vsvars.bat"
-  )
-  shift
-)
-
 :checkBaseTools
 IF NOT EXIST "%EDK_TOOLS_PATH%\toolsetup.bat" goto BadBaseTools
 call %EDK_TOOLS_PATH%\toolsetup.bat %*
 if /I "%1"=="Reconfig" shift
 goto check_NASM
@@ -147,20 +135,11 @@ if /I "%1"=="Rebuild" shift
 if /I "%1"=="ForceRebuild" shift
 if "%1"=="" goto end
 
 :Usage
   @echo.
-  @echo  Usage: "%0 [-h | -help | --help | /h | /help | /?] [--nt32 [X64]] [Reconfig] [Rebuild] [ForceRebuild]"
-  @echo         --nt32 [X64]   If a compiler tool chain is not available in the
-  @echo                        environment, call a script to attempt to set one up.
-  @echo                        This flag is only required if building the
-  @echo                        Nt32Pkg/Nt32Pkg.dsc system emulator.
-  @echo                        If the X64 argument is set, and a compiler tool chain is
-  @echo                        not available, attempt to set up a tool chain that will
-  @echo                        create X64 binaries. Setting these two options have the
-  @echo                        potential side effect of changing tool chains used for a
-  @echo                        rebuild.
+  @echo  Usage: "%0 [-h | -help | --help | /h | /help | /?] [Reconfig] [Rebuild] [ForceRebuild]"
   @echo.
   @echo         Reconfig       Reinstall target.txt, tools_def.txt and build_rule.txt.
   @echo         Rebuild        Perform incremental rebuild of BaseTools binaries.
   @echo         ForceRebuild   Force a full rebuild of BaseTools binaries.
   @echo.
-- 
1.9.5.msysgit.1

[patch 2/2] Edk2Setup: Support different VS tool chain setup

[Dandan Bi]

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693

This patch is to update edksetup with additional option:
VS2017 VS2015 VS2013 VS2012 to setup different VS environment.
And will report error if the specified VS tool is not installed.
For VS2017, also consider the case that only VS2017 build tool
is installed.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
---
 BaseTools/get_vsvars.bat        | 42 ++++++++++++++++++++++++-----
 BaseTools/set_vsprefix_envs.bat | 47 ++++++++++++++++++++++++++++----
 BaseTools/toolsetup.bat         | 60 ++++++++++++++++++++++++++++++++++++++---
 edksetup.bat                    | 11 +++++++-
 4 files changed, 145 insertions(+), 15 deletions(-)

diff --git a/BaseTools/get_vsvars.bat b/BaseTools/get_vsvars.bat
index 9b5e9d2..9f3759b 100644
--- a/BaseTools/get_vsvars.bat
+++ b/BaseTools/get_vsvars.bat
@@ -6,11 +6,16 @@
 @REM SPDX-License-Identifier: BSD-2-Clause-Patent
 @REM
 
 
 @echo off
-goto  :main
+set SCRIPT_ERROR=0
+if "%1"=="" goto main
+if /I "%1"=="VS2017" goto VS2017Vars
+if /I "%1"=="VS2015" goto VS2015Vars
+if /I "%1"=="VS2013" goto VS2013Vars
+if /I "%1"=="VS2012" goto VS2012Vars
 
 :set_vsvars
 for /f "usebackq tokens=1* delims=: " %%i in (`%*`) do (
   if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
 )
@@ -24,22 +29,47 @@ if defined VCINSTALLDIR goto :EOF
   if exist  "%GET_VSVARS_BAT_CHECK_DIR%\vsvars32.bat"  call "%GET_VSVARS_BAT_CHECK_DIR%\vsvars32.bat"
 :vsvars_done
 goto :EOF
 
 
+:ToolNotInstall
+set SCRIPT_ERROR=1
+goto :EOF
+
 REM NOTE: This file will find the most recent Visual Studio installation
 REM       apparent from the environment.
 REM       To use an older version, modify your environment set up.
 REM       (Or invoke the relevant vsvars32 file beforehand).
 
 :main
 if defined VCINSTALLDIR goto :done
-  if exist "%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe"  call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe"
-  if exist "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe"       call :set_vsvars "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe"
-  if defined VS140COMNTOOLS  call :read_vsvars  "%VS140COMNTOOLS%"
-  if defined VS120COMNTOOLS  call :read_vsvars  "%VS120COMNTOOLS%"
-  if defined VS110COMNTOOLS  call :read_vsvars  "%VS110COMNTOOLS%"
+  :VS2017Vars
+  if exist "%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe" (
+    if exist "%ProgramFiles(x86)%\Microsoft Visual Studio\2017\BuildTools" (
+      call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe" -products Microsoft.VisualStudio.Product.BuildTools
+    ) else (
+      call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe"
+    )
+  )
+  if exist "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe" (
+    if exist "%ProgramFiles%\Microsoft Visual Studio\2017\BuildTools" (
+      call :set_vsvars "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe" -products Microsoft.VisualStudio.Product.BuildTools
+    ) else (
+      call :set_vsvars "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe"
+    )
+  )
+  if /I "%1"=="VS2017" goto ToolNotInstall
+
+  :VS2015Vars
+  if defined VS140COMNTOOLS (call :read_vsvars  "%VS140COMNTOOLS%") else (if /I "%1"=="VS2015" goto ToolNotInstall)
+
+  :VS2013Vars
+  if defined VS120COMNTOOLS ( call :read_vsvars  "%VS120COMNTOOLS%") else (if /I "%1"=="VS2013" goto ToolNotInstall)
+
+  :VS2012Vars
+  if defined VS110COMNTOOLS (call :read_vsvars  "%VS110COMNTOOLS%") else (if /I "%1"=="VS2012" goto ToolNotInstall)
+
   if defined VS100COMNTOOLS  call :read_vsvars  "%VS100COMNTOOLS%"
   if defined VS90COMNTOOLS   call :read_vsvars  "%VS90COMNTOOLS%"
   if defined VS80COMNTOOLS   call :read_vsvars  "%VS80COMNTOOLS%"
   if defined VS71COMNTOOLS   call :read_vsvars  "%VS71COMNTOOLS%"
 
diff --git a/BaseTools/set_vsprefix_envs.bat b/BaseTools/set_vsprefix_envs.bat
index 95f30f7..81686f5 100644
--- a/BaseTools/set_vsprefix_envs.bat
+++ b/BaseTools/set_vsprefix_envs.bat
@@ -8,10 +8,22 @@
 @REM SPDX-License-Identifier: BSD-2-Clause-Patent
 @REM
 
 @echo off
 pushd .
+set SCRIPT_ERROR=0
+goto main
+
+:ToolNotInstall
+set SCRIPT_ERROR=1
+goto :EOF
+
+:main
+if /I "%1"=="VS2017" goto SetVS2017
+if /I "%1"=="VS2015" goto SetVS2015
+if /I "%1"=="VS2013" goto SetVS2013
+if /I "%1"=="VS2012" goto SetVS2012
 
 if defined VS71COMNTOOLS (
   if not defined VS2003_PREFIX (
     set "VS2003_PREFIX=%VS71COMNTOOLS:~0,-14%"
   )
@@ -45,57 +57,82 @@ if defined VS100COMNTOOLS (
   if not defined WINSDK7x86_PREFIX (
     set "WINSDK7x86_PREFIX=c:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bin\"
   )
 )
 
+:SetVS2012
 if defined VS110COMNTOOLS (
   if not defined VS2012_PREFIX (
     set "VS2012_PREFIX=%VS110COMNTOOLS:~0,-14%"
   )
   if not defined WINSDK71_PREFIX (
     set "WINSDK71_PREFIX=c:\Program Files\Microsoft SDKs\Windows\v7.1A\Bin\"
   )
   if not defined WINSDK71x86_PREFIX (
     set "WINSDK71x86_PREFIX=c:\Program Files (x86)\Microsoft SDKs\Windows\v7.1A\Bin\"
   )
+) else (
+  if /I "%1"=="VS2012" goto ToolNotInstall
 )
+if /I "%1"=="VS2012" goto SetWinDDK
 
+:SetVS2013
 if defined VS120COMNTOOLS (
   if not defined VS2013_PREFIX (
     set "VS2013_PREFIX=%VS120COMNTOOLS:~0,-14%"
   )
   if not defined WINSDK8_PREFIX (
     set "WINSDK8_PREFIX=c:\Program Files\Windows Kits\8.0\bin\"
   )
   if not defined WINSDK8x86_PREFIX (
     set "WINSDK8x86_PREFIX=c:\Program Files (x86)\Windows Kits\8.0\bin\"
   )
+) else (
+  if /I "%1"=="VS2013" goto ToolNotInstall
 )
+if /I "%1"=="VS2013" goto SetWinDDK
 
+:SetVS2015
 if defined VS140COMNTOOLS (
   if not defined VS2015_PREFIX (
     set "VS2015_PREFIX=%VS140COMNTOOLS:~0,-14%"
   )
   if not defined WINSDK81_PREFIX (
     set "WINSDK81_PREFIX=c:\Program Files\Windows Kits\8.1\bin\"
   )
   if not defined WINSDK81x86_PREFIX (
     set "WINSDK81x86_PREFIX=c:\Program Files (x86)\Windows Kits\8.1\bin\"
   )
+) else (
+  if /I "%1"=="VS2015" goto ToolNotInstall
 )
+if /I "%1"=="VS2015" goto SetWinDDK
 
-@REM set VS2017
+:SetVS2017
 if not defined VS150COMNTOOLS (
   if exist "%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe" (
-    for /f "usebackq tokens=1* delims=: " %%i in (`"%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe"`) do (
-      if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
+    if exist "%ProgramFiles(x86)%\Microsoft Visual Studio\2017\BuildTools" (
+      for /f "usebackq tokens=1* delims=: " %%i in (`"%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe" -products Microsoft.VisualStudio.Product.BuildTools`) do (
+        if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
+      )
+    ) else (
+      for /f "usebackq tokens=1* delims=: " %%i in (`"%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe"`) do (
+        if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
+      )
     )
   ) else if exist "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe" (
-    for /f "usebackq tokens=1* delims=: " %%i in (`"%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe"`) do (
-      if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
+    if exist "%ProgramFiles%\Microsoft Visual Studio\2017\BuildTools" (
+      for /f "usebackq tokens=1* delims=: " %%i in (`"%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe" -products Microsoft.VisualStudio.Product.BuildTools`) do (
+        if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
+      )
+    ) else (
+      for /f "usebackq tokens=1* delims=: " %%i in (`"%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe"`) do (
+        if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
+      )
     )
   ) else (
+    if /I "%1"=="VS2017" goto ToolNotInstall
     goto SetWinDDK
   )
 )
 
 if defined VCToolsInstallDir (
diff --git a/BaseTools/toolsetup.bat b/BaseTools/toolsetup.bat
index 999f3b3..395694f 100755
--- a/BaseTools/toolsetup.bat
+++ b/BaseTools/toolsetup.bat
@@ -9,10 +9,11 @@
 @REM SPDX-License-Identifier: BSD-2-Clause-Patent
 @REM
 
 @echo off
 pushd .
+set SCRIPT_ERROR=0
 
 @REM ##############################################################
 @REM # You should not have to modify anything below this line
 @REM #
 
@@ -39,10 +40,34 @@ if /I "%1"=="/?" goto Usage
   if /I "%1"=="ForceRebuild" (
     shift
     set FORCE_REBUILD=TRUE
     goto loop
   )
+  if /I "%1"=="VS2017" (
+    shift
+    set VS2017=TRUE
+    set VSTool=VS2017
+    goto loop
+  )
+  if /I "%1"=="VS2015" (
+    shift
+    set VS2015=TRUE
+    set VSTool=VS2015
+    goto loop
+  )
+  if /I "%1"=="VS2013" (
+    shift
+    set VS2013=TRUE
+    set VSTool=VS2013
+    goto loop
+  )
+  if /I "%1"=="VS2012" (
+    shift
+    set VS2012=TRUE
+    set VSTool=VS2012
+    goto loop
+  )
   if "%1"=="" goto setup_workspace
   if exist %1 (
     if not defined BASE_TOOLS_PATH (
       if exist %1\Source set BASE_TOOLS_PATH=%1
       shift
@@ -149,11 +174,31 @@ IF NOT exist "%EDK_TOOLS_PATH%\set_vsprefix_envs.bat" (
   @echo.
   @echo !!! ERROR !!! The set_vsprefix_envs.bat was not found !!!
   @echo.
   goto end
 )
-call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat
+if defined VS2017 (
+  call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat VS2017
+) else if defined VS2015 (
+  call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat VS2015
+  call %EDK_TOOLS_PATH%\get_vsvars.bat VS2015
+) else if defined VS2013 (
+  call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat VS2013
+  call %EDK_TOOLS_PATH%\get_vsvars.bat VS2013
+) else if defined VS2012 (
+  call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat VS2012
+  call %EDK_TOOLS_PATH%\get_vsvars.bat VS2012
+) else (
+  call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat
+  call %EDK_TOOLS_PATH%\get_vsvars.bat
+)
+if %SCRIPT_ERROR% NEQ 0 (
+  @echo.
+  @echo !!! ERROR !!! %VSTool% is not installed !!!
+  @echo.
+  goto end
+)
 
 if not defined CONF_PATH (
   set CONF_PATH=%WORKSPACE%\Conf
 )
 
@@ -363,11 +408,11 @@ goto end
   if not defined FORCE_REBUILD (
     if not defined REBUILD (
       goto end
     )
   )
-  call "%EDK_TOOLS_PATH%\get_vsvars.bat"
+
   if not defined VCINSTALLDIR (
     @echo.
     @echo !!! ERROR !!!! Cannot find Visual Studio, required to build C tools !!!
     @echo.
     goto end
@@ -397,22 +442,31 @@ goto end
   echo.
   goto end
 
 :Usage
   @echo.
-  echo  Usage: "%0 [-h | -help | --help | /h | /help | /?] [ Rebuild | ForceRebuild ] [Reconfig] [base_tools_path [edk_tools_path]]"
+  echo  Usage: "%0 [-h | -help | --help | /h | /help | /?] [ Rebuild | ForceRebuild ] [Reconfig] [base_tools_path [edk_tools_path]] [VS2017] [VS2015] [VS2013] [VS2012]"
   @echo.
   @echo         base_tools_path   BaseTools project path, BASE_TOOLS_PATH will be set to this path.
   @echo         edk_tools_path    EDK_TOOLS_PATH will be set to this path.
   @echo         Rebuild           If sources are available perform an Incremental build, only
   @echo                           build those updated tools.
   @echo         ForceRebuild      If sources are available, rebuild all tools regardless of
   @echo                           whether they have been updated or not.
   @echo         Reconfig          Reinstall target.txt, tools_def.txt and build_rule.txt.
+  @echo         VS2012            Set the env for VS2012 build.
+  @echo         VS2013            Set the env for VS2013 build.
+  @echo         VS2015            Set the env for VS2015 build.
+  @echo         VS2017            Set the env for VS2017 build.
   @echo.
 
 :end
 set REBUILD=
 set FORCE_REBUILD=
 set RECONFIG=
+set VS2017=
+set VS2015=
+set VS2013=
+set VS2012=
+set VSTool=
 popd
 
diff --git a/edksetup.bat b/edksetup.bat
index d607e2e..ed46945 100755
--- a/edksetup.bat
+++ b/edksetup.bat
@@ -131,19 +131,28 @@ if defined CYGWIN_HOME (
 )
 
 :cygwin_done
 if /I "%1"=="Rebuild" shift
 if /I "%1"=="ForceRebuild" shift
+if /I "%1"=="VS2017" shift
+if /I "%1"=="VS2015" shift
+if /I "%1"=="VS2013" shift
+if /I "%1"=="VS2012" shift
 if "%1"=="" goto end
 
 :Usage
   @echo.
-  @echo  Usage: "%0 [-h | -help | --help | /h | /help | /?] [Reconfig] [Rebuild] [ForceRebuild]"
+  @echo  Usage: "%0 [-h | -help | --help | /h | /help | /?] [Reconfig] [Rebuild] [ForceRebuild] [VS2017] [VS2015] [VS2013] [VS2012]"
   @echo.
   @echo         Reconfig       Reinstall target.txt, tools_def.txt and build_rule.txt.
   @echo         Rebuild        Perform incremental rebuild of BaseTools binaries.
   @echo         ForceRebuild   Force a full rebuild of BaseTools binaries.
+  @echo         ForceRebuild   Force a full rebuild of BaseTools binaries.
+  @echo         VS2012         Set the env for VS2012 build.
+  @echo         VS2013         Set the env for VS2013 build.
+  @echo         VS2015         Set the env for VS2015 build.
+  @echo         VS2017         Set the env for VS2017 build.
   @echo.
   @echo  Note that target.template, tools_def.template and build_rules.template
   @echo  will only be copied to target.txt, tools_def.txt and build_rule.txt
   @echo  respectively if they do not exist. Use option [Reconfig] to force the copy.
   @echo.
-- 
1.9.5.msysgit.1

Re: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

[Liming Gao]

Dandan:
  One minor comment. Help message shows two ForceRebuild options. Please remove one. And, this change retire --nt32 option. Please update wiki page on edksetup usage in https://github.com/tianocore/tianocore.github.io/wiki/Getting-Started-Writing-Simple-Application. With those change, Reviewed-by: Liming Gao <liming.gao@intel.com>

        Reconfig       Reinstall target.txt, tools_def.txt and build_rule.txt.
        Rebuild        Perform incremental rebuild of BaseTools binaries.
        ForceRebuild   Force a full rebuild of BaseTools binaries.
        ForceRebuild   Force a full rebuild of BaseTools binaries.

Thanks
Liming
> -----Original Message-----
> From: Bi, Dandan
> Sent: Sunday, June 23, 2019 9:59 PM
> To: devel@edk2.groups.io
> Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming <liming.gao@intel.com>
> Subject: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> 
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693
> 
> Patch 1 remove nt32 related flags in bat files.
> Patch 2 setup for different VS tool chains.
> 
> Cc: Bob Feng <bob.c.feng@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Dandan Bi (2):
>   Edk2: Remove nt32 related flag in bat files
>   Edk2Setup: Support different VS tool chain setup
> 
>  BaseTools/get_vsvars.bat        | 42 +++++++++++++++++++++----
>  BaseTools/set_vsprefix_envs.bat | 47 +++++++++++++++++++++++++---
>  BaseTools/toolsetup.bat         | 68 ++++++++++++++++++++++++++++++++++-------
>  edksetup.bat                    | 32 ++++++-------------
>  4 files changed, 145 insertions(+), 44 deletions(-)
> 
> --
> 1.9.5.msysgit.1

Re: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

[Bob Feng]

The patches look good.

I think removing --nt32 option is incompatible change. What about keep the --nt32 ?

For the Patch 2 setup for different VS tool chains.
Reviewed-by: Bob Feng <bob.c.feng@intel.com>

Thanks,
Bob

-----Original Message-----
From: Bi, Dandan 
Sent: Sunday, June 23, 2019 9:59 PM
To: devel@edk2.groups.io
Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming <liming.gao@intel.com>
Subject: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693

Patch 1 remove nt32 related flags in bat files.
Patch 2 setup for different VS tool chains.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Dandan Bi (2):
  Edk2: Remove nt32 related flag in bat files
  Edk2Setup: Support different VS tool chain setup

 BaseTools/get_vsvars.bat        | 42 +++++++++++++++++++++----
 BaseTools/set_vsprefix_envs.bat | 47 +++++++++++++++++++++++++---
 BaseTools/toolsetup.bat         | 68 ++++++++++++++++++++++++++++++++++-------
 edksetup.bat                    | 32 ++++++-------------
 4 files changed, 145 insertions(+), 44 deletions(-)

-- 
1.9.5.msysgit.1

Re: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

[Liming Gao]

Bob:
  --nt32 option is added for Nt32Pkg. Now, Nt32Pkg has been removed. So, I think it is fine to remove --nt32 option. 

> -----Original Message-----
> From: Feng, Bob C
> Sent: Thursday, June 27, 2019 7:56 PM
> To: Bi, Dandan <dandan.bi@intel.com>; devel@edk2.groups.io
> Cc: Gao, Liming <liming.gao@intel.com>
> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> 
> The patches look good.
> 
> I think removing --nt32 option is incompatible change. What about keep the --nt32 ?
> 
> For the Patch 2 setup for different VS tool chains.
> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
> 
> Thanks,
> Bob
> 
> -----Original Message-----
> From: Bi, Dandan
> Sent: Sunday, June 23, 2019 9:59 PM
> To: devel@edk2.groups.io
> Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming <liming.gao@intel.com>
> Subject: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> 
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693
> 
> Patch 1 remove nt32 related flags in bat files.
> Patch 2 setup for different VS tool chains.
> 
> Cc: Bob Feng <bob.c.feng@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Dandan Bi (2):
>   Edk2: Remove nt32 related flag in bat files
>   Edk2Setup: Support different VS tool chain setup
> 
>  BaseTools/get_vsvars.bat        | 42 +++++++++++++++++++++----
>  BaseTools/set_vsprefix_envs.bat | 47 +++++++++++++++++++++++++---
>  BaseTools/toolsetup.bat         | 68 ++++++++++++++++++++++++++++++++++-------
>  edksetup.bat                    | 32 ++++++-------------
>  4 files changed, 145 insertions(+), 44 deletions(-)
> 
> --
> 1.9.5.msysgit.1

Re: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

[Bob Feng]

OK.  I think it may break some pre-build script if the pre-build script have "edksetup --nt32"...

-----Original Message-----
From: Gao, Liming 
Sent: Thursday, June 27, 2019 10:48 PM
To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan <dandan.bi@intel.com>; devel@edk2.groups.io
Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

Bob:
  --nt32 option is added for Nt32Pkg. Now, Nt32Pkg has been removed. So, I think it is fine to remove --nt32 option. 

> -----Original Message-----
> From: Feng, Bob C
> Sent: Thursday, June 27, 2019 7:56 PM
> To: Bi, Dandan <dandan.bi@intel.com>; devel@edk2.groups.io
> Cc: Gao, Liming <liming.gao@intel.com>
> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> 
> The patches look good.
> 
> I think removing --nt32 option is incompatible change. What about keep the --nt32 ?
> 
> For the Patch 2 setup for different VS tool chains.
> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
> 
> Thanks,
> Bob
> 
> -----Original Message-----
> From: Bi, Dandan
> Sent: Sunday, June 23, 2019 9:59 PM
> To: devel@edk2.groups.io
> Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming <liming.gao@intel.com>
> Subject: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> 
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693
> 
> Patch 1 remove nt32 related flags in bat files.
> Patch 2 setup for different VS tool chains.
> 
> Cc: Bob Feng <bob.c.feng@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Dandan Bi (2):
>   Edk2: Remove nt32 related flag in bat files
>   Edk2Setup: Support different VS tool chain setup
> 
>  BaseTools/get_vsvars.bat        | 42 +++++++++++++++++++++----
>  BaseTools/set_vsprefix_envs.bat | 47 +++++++++++++++++++++++++---
>  BaseTools/toolsetup.bat         | 68 ++++++++++++++++++++++++++++++++++-------
>  edksetup.bat                    | 32 ++++++-------------
>  4 files changed, 145 insertions(+), 44 deletions(-)
> 
> --
> 1.9.5.msysgit.1

Re: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

[Liming Gao]

Yes. Those script needs to be updated together. 

> -----Original Message-----
> From: Feng, Bob C
> Sent: Thursday, June 27, 2019 11:14 PM
> To: Gao, Liming <liming.gao@intel.com>; Bi, Dandan <dandan.bi@intel.com>; devel@edk2.groups.io
> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> 
> OK.  I think it may break some pre-build script if the pre-build script have "edksetup --nt32"...
> 
> -----Original Message-----
> From: Gao, Liming
> Sent: Thursday, June 27, 2019 10:48 PM
> To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan <dandan.bi@intel.com>; devel@edk2.groups.io
> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> 
> Bob:
>   --nt32 option is added for Nt32Pkg. Now, Nt32Pkg has been removed. So, I think it is fine to remove --nt32 option.
> 
> > -----Original Message-----
> > From: Feng, Bob C
> > Sent: Thursday, June 27, 2019 7:56 PM
> > To: Bi, Dandan <dandan.bi@intel.com>; devel@edk2.groups.io
> > Cc: Gao, Liming <liming.gao@intel.com>
> > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >
> > The patches look good.
> >
> > I think removing --nt32 option is incompatible change. What about keep the --nt32 ?
> >
> > For the Patch 2 setup for different VS tool chains.
> > Reviewed-by: Bob Feng <bob.c.feng@intel.com>
> >
> > Thanks,
> > Bob
> >
> > -----Original Message-----
> > From: Bi, Dandan
> > Sent: Sunday, June 23, 2019 9:59 PM
> > To: devel@edk2.groups.io
> > Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming <liming.gao@intel.com>
> > Subject: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693
> >
> > Patch 1 remove nt32 related flags in bat files.
> > Patch 2 setup for different VS tool chains.
> >
> > Cc: Bob Feng <bob.c.feng@intel.com>
> > Cc: Liming Gao <liming.gao@intel.com>
> > Dandan Bi (2):
> >   Edk2: Remove nt32 related flag in bat files
> >   Edk2Setup: Support different VS tool chain setup
> >
> >  BaseTools/get_vsvars.bat        | 42 +++++++++++++++++++++----
> >  BaseTools/set_vsprefix_envs.bat | 47 +++++++++++++++++++++++++---
> >  BaseTools/toolsetup.bat         | 68 ++++++++++++++++++++++++++++++++++-------
> >  edksetup.bat                    | 32 ++++++-------------
> >  4 files changed, 145 insertions(+), 44 deletions(-)
> >
> > --
> > 1.9.5.msysgit.1

Re: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

[Dandan Bi]

Hi Liming and Bob,

Thanks for the review. So we reach the agreement that remove the --nt32 flag, right? If so, I will address Liming's comments and then push these two patches.


Thanks,
Dandan

> -----Original Message-----
> From: Gao, Liming
> Sent: Thursday, June 27, 2019 11:17 PM
> To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan
> <dandan.bi@intel.com>; devel@edk2.groups.io
> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> 
> Yes. Those script needs to be updated together.
> 
> > -----Original Message-----
> > From: Feng, Bob C
> > Sent: Thursday, June 27, 2019 11:14 PM
> > To: Gao, Liming <liming.gao@intel.com>; Bi, Dandan
> > <dandan.bi@intel.com>; devel@edk2.groups.io
> > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >
> > OK.  I think it may break some pre-build script if the pre-build script have
> "edksetup --nt32"...
> >
> > -----Original Message-----
> > From: Gao, Liming
> > Sent: Thursday, June 27, 2019 10:48 PM
> > To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan
> > <dandan.bi@intel.com>; devel@edk2.groups.io
> > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >
> > Bob:
> >   --nt32 option is added for Nt32Pkg. Now, Nt32Pkg has been removed. So,
> I think it is fine to remove --nt32 option.
> >
> > > -----Original Message-----
> > > From: Feng, Bob C
> > > Sent: Thursday, June 27, 2019 7:56 PM
> > > To: Bi, Dandan <dandan.bi@intel.com>; devel@edk2.groups.io
> > > Cc: Gao, Liming <liming.gao@intel.com>
> > > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> > >
> > > The patches look good.
> > >
> > > I think removing --nt32 option is incompatible change. What about keep
> the --nt32 ?
> > >
> > > For the Patch 2 setup for different VS tool chains.
> > > Reviewed-by: Bob Feng <bob.c.feng@intel.com>
> > >
> > > Thanks,
> > > Bob
> > >
> > > -----Original Message-----
> > > From: Bi, Dandan
> > > Sent: Sunday, June 23, 2019 9:59 PM
> > > To: devel@edk2.groups.io
> > > Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming
> > > <liming.gao@intel.com>
> > > Subject: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> > >
> > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693
> > >
> > > Patch 1 remove nt32 related flags in bat files.
> > > Patch 2 setup for different VS tool chains.
> > >
> > > Cc: Bob Feng <bob.c.feng@intel.com>
> > > Cc: Liming Gao <liming.gao@intel.com> Dandan Bi (2):
> > >   Edk2: Remove nt32 related flag in bat files
> > >   Edk2Setup: Support different VS tool chain setup
> > >
> > >  BaseTools/get_vsvars.bat        | 42 +++++++++++++++++++++----
> > >  BaseTools/set_vsprefix_envs.bat | 47 +++++++++++++++++++++++++--
> -
> > >  BaseTools/toolsetup.bat         | 68
> ++++++++++++++++++++++++++++++++++-------
> > >  edksetup.bat                    | 32 ++++++-------------
> > >  4 files changed, 145 insertions(+), 44 deletions(-)
> > >
> > > --
> > > 1.9.5.msysgit.1

Re: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

[Liming Gao]

Dandan:

 If you find any pre script to use --nt32 option, please remove them first, then do this change.

>-----Original Message-----
>From: Bi, Dandan
>Sent: Friday, June 28, 2019 9:11 AM
>To: Gao, Liming <liming.gao@intel.com>; Feng, Bob C
><bob.c.feng@intel.com>; devel@edk2.groups.io
>Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>
>Hi Liming and Bob,
>
>Thanks for the review. So we reach the agreement that remove the --nt32
>flag, right? If so, I will address Liming's comments and then push these two
>patches.
>
>
>Thanks,
>Dandan
>
>> -----Original Message-----
>> From: Gao, Liming
>> Sent: Thursday, June 27, 2019 11:17 PM
>> To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan
>> <dandan.bi@intel.com>; devel@edk2.groups.io
>> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>>
>> Yes. Those script needs to be updated together.
>>
>> > -----Original Message-----
>> > From: Feng, Bob C
>> > Sent: Thursday, June 27, 2019 11:14 PM
>> > To: Gao, Liming <liming.gao@intel.com>; Bi, Dandan
>> > <dandan.bi@intel.com>; devel@edk2.groups.io
>> > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>> >
>> > OK.  I think it may break some pre-build script if the pre-build script have
>> "edksetup --nt32"...
>> >
>> > -----Original Message-----
>> > From: Gao, Liming
>> > Sent: Thursday, June 27, 2019 10:48 PM
>> > To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan
>> > <dandan.bi@intel.com>; devel@edk2.groups.io
>> > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>> >
>> > Bob:
>> >   --nt32 option is added for Nt32Pkg. Now, Nt32Pkg has been removed. So,
>> I think it is fine to remove --nt32 option.
>> >
>> > > -----Original Message-----
>> > > From: Feng, Bob C
>> > > Sent: Thursday, June 27, 2019 7:56 PM
>> > > To: Bi, Dandan <dandan.bi@intel.com>; devel@edk2.groups.io
>> > > Cc: Gao, Liming <liming.gao@intel.com>
>> > > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>> > >
>> > > The patches look good.
>> > >
>> > > I think removing --nt32 option is incompatible change. What about keep
>> the --nt32 ?
>> > >
>> > > For the Patch 2 setup for different VS tool chains.
>> > > Reviewed-by: Bob Feng <bob.c.feng@intel.com>
>> > >
>> > > Thanks,
>> > > Bob
>> > >
>> > > -----Original Message-----
>> > > From: Bi, Dandan
>> > > Sent: Sunday, June 23, 2019 9:59 PM
>> > > To: devel@edk2.groups.io
>> > > Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming
>> > > <liming.gao@intel.com>
>> > > Subject: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>> > >
>> > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693
>> > >
>> > > Patch 1 remove nt32 related flags in bat files.
>> > > Patch 2 setup for different VS tool chains.
>> > >
>> > > Cc: Bob Feng <bob.c.feng@intel.com>
>> > > Cc: Liming Gao <liming.gao@intel.com> Dandan Bi (2):
>> > >   Edk2: Remove nt32 related flag in bat files
>> > >   Edk2Setup: Support different VS tool chain setup
>> > >
>> > >  BaseTools/get_vsvars.bat        | 42 +++++++++++++++++++++----
>> > >  BaseTools/set_vsprefix_envs.bat | 47 +++++++++++++++++++++++++-
>-
>> -
>> > >  BaseTools/toolsetup.bat         | 68
>> ++++++++++++++++++++++++++++++++++-------
>> > >  edksetup.bat                    | 32 ++++++-------------
>> > >  4 files changed, 145 insertions(+), 44 deletions(-)
>> > >
>> > > --
>> > > 1.9.5.msysgit.1

Re: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

[Bob Feng]

Hi Dandan,

I found the GitEdk2MinMtOlympus.bat for minpurely and GitEdk2MinKabylake.bat for minkabylake need to update. Would you update it?

Thanks,
Bob

-----Original Message-----
From: Gao, Liming 
Sent: Friday, June 28, 2019 9:12 AM
To: Bi, Dandan <dandan.bi@intel.com>; Feng, Bob C <bob.c.feng@intel.com>; devel@edk2.groups.io
Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

Dandan:

 If you find any pre script to use --nt32 option, please remove them first, then do this change.

>-----Original Message-----
>From: Bi, Dandan
>Sent: Friday, June 28, 2019 9:11 AM
>To: Gao, Liming <liming.gao@intel.com>; Feng, Bob C 
><bob.c.feng@intel.com>; devel@edk2.groups.io
>Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>
>Hi Liming and Bob,
>
>Thanks for the review. So we reach the agreement that remove the --nt32 
>flag, right? If so, I will address Liming's comments and then push 
>these two patches.
>
>
>Thanks,
>Dandan
>
>> -----Original Message-----
>> From: Gao, Liming
>> Sent: Thursday, June 27, 2019 11:17 PM
>> To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan 
>> <dandan.bi@intel.com>; devel@edk2.groups.io
>> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>>
>> Yes. Those script needs to be updated together.
>>
>> > -----Original Message-----
>> > From: Feng, Bob C
>> > Sent: Thursday, June 27, 2019 11:14 PM
>> > To: Gao, Liming <liming.gao@intel.com>; Bi, Dandan 
>> > <dandan.bi@intel.com>; devel@edk2.groups.io
>> > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>> >
>> > OK.  I think it may break some pre-build script if the pre-build 
>> > script have
>> "edksetup --nt32"...
>> >
>> > -----Original Message-----
>> > From: Gao, Liming
>> > Sent: Thursday, June 27, 2019 10:48 PM
>> > To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan 
>> > <dandan.bi@intel.com>; devel@edk2.groups.io
>> > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>> >
>> > Bob:
>> >   --nt32 option is added for Nt32Pkg. Now, Nt32Pkg has been 
>> > removed. So,
>> I think it is fine to remove --nt32 option.
>> >
>> > > -----Original Message-----
>> > > From: Feng, Bob C
>> > > Sent: Thursday, June 27, 2019 7:56 PM
>> > > To: Bi, Dandan <dandan.bi@intel.com>; devel@edk2.groups.io
>> > > Cc: Gao, Liming <liming.gao@intel.com>
>> > > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>> > >
>> > > The patches look good.
>> > >
>> > > I think removing --nt32 option is incompatible change. What about 
>> > > keep
>> the --nt32 ?
>> > >
>> > > For the Patch 2 setup for different VS tool chains.
>> > > Reviewed-by: Bob Feng <bob.c.feng@intel.com>
>> > >
>> > > Thanks,
>> > > Bob
>> > >
>> > > -----Original Message-----
>> > > From: Bi, Dandan
>> > > Sent: Sunday, June 23, 2019 9:59 PM
>> > > To: devel@edk2.groups.io
>> > > Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming 
>> > > <liming.gao@intel.com>
>> > > Subject: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>> > >
>> > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693
>> > >
>> > > Patch 1 remove nt32 related flags in bat files.
>> > > Patch 2 setup for different VS tool chains.
>> > >
>> > > Cc: Bob Feng <bob.c.feng@intel.com>
>> > > Cc: Liming Gao <liming.gao@intel.com> Dandan Bi (2):
>> > >   Edk2: Remove nt32 related flag in bat files
>> > >   Edk2Setup: Support different VS tool chain setup
>> > >
>> > >  BaseTools/get_vsvars.bat        | 42 +++++++++++++++++++++----
>> > >  BaseTools/set_vsprefix_envs.bat | 47 +++++++++++++++++++++++++-
>-
>> -
>> > >  BaseTools/toolsetup.bat         | 68
>> ++++++++++++++++++++++++++++++++++-------
>> > >  edksetup.bat                    | 32 ++++++-------------
>> > >  4 files changed, 145 insertions(+), 44 deletions(-)
>> > >
>> > > --
>> > > 1.9.5.msysgit.1

Re: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

[Dandan Bi]

Hi Bob,

I have updated GitEdk2MinMtOlympus.bat for minpurely via https://github.com/tianocore/edk2-platforms/commit/e7fc97a3f9045c35a077ab0151c696aeba722417
And GitEdk2MinKabylake.bat for minkabylake has been removed  via https://github.com/tianocore/edk2-platforms/commit/acbd81a92de1b4213f272a2fa66cc97af30c835c

Both of the platforms should build ok now. 



Thanks,
Dandan

> -----Original Message-----
> From: Feng, Bob C
> Sent: Wednesday, July 3, 2019 8:23 PM
> To: Gao, Liming <liming.gao@intel.com>; Bi, Dandan <dandan.bi@intel.com>;
> devel@edk2.groups.io
> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> 
> Hi Dandan,
> 
> I found the GitEdk2MinMtOlympus.bat for minpurely and
> GitEdk2MinKabylake.bat for minkabylake need to update. Would you update
> it?
> 
> Thanks,
> Bob
> 
> -----Original Message-----
> From: Gao, Liming
> Sent: Friday, June 28, 2019 9:12 AM
> To: Bi, Dandan <dandan.bi@intel.com>; Feng, Bob C
> <bob.c.feng@intel.com>; devel@edk2.groups.io
> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> 
> Dandan:
> 
>  If you find any pre script to use --nt32 option, please remove them first,
> then do this change.
> 
> >-----Original Message-----
> >From: Bi, Dandan
> >Sent: Friday, June 28, 2019 9:11 AM
> >To: Gao, Liming <liming.gao@intel.com>; Feng, Bob C
> ><bob.c.feng@intel.com>; devel@edk2.groups.io
> >Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >
> >Hi Liming and Bob,
> >
> >Thanks for the review. So we reach the agreement that remove the --nt32
> >flag, right? If so, I will address Liming's comments and then push
> >these two patches.
> >
> >
> >Thanks,
> >Dandan
> >
> >> -----Original Message-----
> >> From: Gao, Liming
> >> Sent: Thursday, June 27, 2019 11:17 PM
> >> To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan
> >> <dandan.bi@intel.com>; devel@edk2.groups.io
> >> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >>
> >> Yes. Those script needs to be updated together.
> >>
> >> > -----Original Message-----
> >> > From: Feng, Bob C
> >> > Sent: Thursday, June 27, 2019 11:14 PM
> >> > To: Gao, Liming <liming.gao@intel.com>; Bi, Dandan
> >> > <dandan.bi@intel.com>; devel@edk2.groups.io
> >> > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >> >
> >> > OK.  I think it may break some pre-build script if the pre-build
> >> > script have
> >> "edksetup --nt32"...
> >> >
> >> > -----Original Message-----
> >> > From: Gao, Liming
> >> > Sent: Thursday, June 27, 2019 10:48 PM
> >> > To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan
> >> > <dandan.bi@intel.com>; devel@edk2.groups.io
> >> > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >> >
> >> > Bob:
> >> >   --nt32 option is added for Nt32Pkg. Now, Nt32Pkg has been
> >> > removed. So,
> >> I think it is fine to remove --nt32 option.
> >> >
> >> > > -----Original Message-----
> >> > > From: Feng, Bob C
> >> > > Sent: Thursday, June 27, 2019 7:56 PM
> >> > > To: Bi, Dandan <dandan.bi@intel.com>; devel@edk2.groups.io
> >> > > Cc: Gao, Liming <liming.gao@intel.com>
> >> > > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >> > >
> >> > > The patches look good.
> >> > >
> >> > > I think removing --nt32 option is incompatible change. What about
> >> > > keep
> >> the --nt32 ?
> >> > >
> >> > > For the Patch 2 setup for different VS tool chains.
> >> > > Reviewed-by: Bob Feng <bob.c.feng@intel.com>
> >> > >
> >> > > Thanks,
> >> > > Bob
> >> > >
> >> > > -----Original Message-----
> >> > > From: Bi, Dandan
> >> > > Sent: Sunday, June 23, 2019 9:59 PM
> >> > > To: devel@edk2.groups.io
> >> > > Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming
> >> > > <liming.gao@intel.com>
> >> > > Subject: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >> > >
> >> > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693
> >> > >
> >> > > Patch 1 remove nt32 related flags in bat files.
> >> > > Patch 2 setup for different VS tool chains.
> >> > >
> >> > > Cc: Bob Feng <bob.c.feng@intel.com>
> >> > > Cc: Liming Gao <liming.gao@intel.com> Dandan Bi (2):
> >> > >   Edk2: Remove nt32 related flag in bat files
> >> > >   Edk2Setup: Support different VS tool chain setup
> >> > >
> >> > >  BaseTools/get_vsvars.bat        | 42 +++++++++++++++++++++----
> >> > >  BaseTools/set_vsprefix_envs.bat | 47
> +++++++++++++++++++++++++-
> >-
> >> -
> >> > >  BaseTools/toolsetup.bat         | 68
> >> ++++++++++++++++++++++++++++++++++-------
> >> > >  edksetup.bat                    | 32 ++++++-------------
> >> > >  4 files changed, 145 insertions(+), 44 deletions(-)
> >> > >
> >> > > --
> >> > > 1.9.5.msysgit.1

Re: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

[Bob Feng]

OK. Thanks. 

I just noticed my local repo is still in devel-minplatform branch.

Thanks,
Bob

-----Original Message-----
From: Bi, Dandan 
Sent: Thursday, July 4, 2019 8:55 AM
To: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming <liming.gao@intel.com>; devel@edk2.groups.io
Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

Hi Bob,

I have updated GitEdk2MinMtOlympus.bat for minpurely via https://github.com/tianocore/edk2-platforms/commit/e7fc97a3f9045c35a077ab0151c696aeba722417
And GitEdk2MinKabylake.bat for minkabylake has been removed  via https://github.com/tianocore/edk2-platforms/commit/acbd81a92de1b4213f272a2fa66cc97af30c835c

Both of the platforms should build ok now. 



Thanks,
Dandan

> -----Original Message-----
> From: Feng, Bob C
> Sent: Wednesday, July 3, 2019 8:23 PM
> To: Gao, Liming <liming.gao@intel.com>; Bi, Dandan 
> <dandan.bi@intel.com>; devel@edk2.groups.io
> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> 
> Hi Dandan,
> 
> I found the GitEdk2MinMtOlympus.bat for minpurely and 
> GitEdk2MinKabylake.bat for minkabylake need to update. Would you 
> update it?
> 
> Thanks,
> Bob
> 
> -----Original Message-----
> From: Gao, Liming
> Sent: Friday, June 28, 2019 9:12 AM
> To: Bi, Dandan <dandan.bi@intel.com>; Feng, Bob C 
> <bob.c.feng@intel.com>; devel@edk2.groups.io
> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> 
> Dandan:
> 
>  If you find any pre script to use --nt32 option, please remove them 
> first, then do this change.
> 
> >-----Original Message-----
> >From: Bi, Dandan
> >Sent: Friday, June 28, 2019 9:11 AM
> >To: Gao, Liming <liming.gao@intel.com>; Feng, Bob C 
> ><bob.c.feng@intel.com>; devel@edk2.groups.io
> >Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >
> >Hi Liming and Bob,
> >
> >Thanks for the review. So we reach the agreement that remove the 
> >--nt32 flag, right? If so, I will address Liming's comments and then 
> >push these two patches.
> >
> >
> >Thanks,
> >Dandan
> >
> >> -----Original Message-----
> >> From: Gao, Liming
> >> Sent: Thursday, June 27, 2019 11:17 PM
> >> To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan 
> >> <dandan.bi@intel.com>; devel@edk2.groups.io
> >> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >>
> >> Yes. Those script needs to be updated together.
> >>
> >> > -----Original Message-----
> >> > From: Feng, Bob C
> >> > Sent: Thursday, June 27, 2019 11:14 PM
> >> > To: Gao, Liming <liming.gao@intel.com>; Bi, Dandan 
> >> > <dandan.bi@intel.com>; devel@edk2.groups.io
> >> > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >> >
> >> > OK.  I think it may break some pre-build script if the pre-build 
> >> > script have
> >> "edksetup --nt32"...
> >> >
> >> > -----Original Message-----
> >> > From: Gao, Liming
> >> > Sent: Thursday, June 27, 2019 10:48 PM
> >> > To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan 
> >> > <dandan.bi@intel.com>; devel@edk2.groups.io
> >> > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >> >
> >> > Bob:
> >> >   --nt32 option is added for Nt32Pkg. Now, Nt32Pkg has been 
> >> > removed. So,
> >> I think it is fine to remove --nt32 option.
> >> >
> >> > > -----Original Message-----
> >> > > From: Feng, Bob C
> >> > > Sent: Thursday, June 27, 2019 7:56 PM
> >> > > To: Bi, Dandan <dandan.bi@intel.com>; devel@edk2.groups.io
> >> > > Cc: Gao, Liming <liming.gao@intel.com>
> >> > > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch 
> >> > > files
> >> > >
> >> > > The patches look good.
> >> > >
> >> > > I think removing --nt32 option is incompatible change. What 
> >> > > about keep
> >> the --nt32 ?
> >> > >
> >> > > For the Patch 2 setup for different VS tool chains.
> >> > > Reviewed-by: Bob Feng <bob.c.feng@intel.com>
> >> > >
> >> > > Thanks,
> >> > > Bob
> >> > >
> >> > > -----Original Message-----
> >> > > From: Bi, Dandan
> >> > > Sent: Sunday, June 23, 2019 9:59 PM
> >> > > To: devel@edk2.groups.io
> >> > > Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming 
> >> > > <liming.gao@intel.com>
> >> > > Subject: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
> >> > >
> >> > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693
> >> > >
> >> > > Patch 1 remove nt32 related flags in bat files.
> >> > > Patch 2 setup for different VS tool chains.
> >> > >
> >> > > Cc: Bob Feng <bob.c.feng@intel.com>
> >> > > Cc: Liming Gao <liming.gao@intel.com> Dandan Bi (2):
> >> > >   Edk2: Remove nt32 related flag in bat files
> >> > >   Edk2Setup: Support different VS tool chain setup
> >> > >
> >> > >  BaseTools/get_vsvars.bat        | 42 +++++++++++++++++++++----
> >> > >  BaseTools/set_vsprefix_envs.bat | 47
> +++++++++++++++++++++++++-
> >-
> >> -
> >> > >  BaseTools/toolsetup.bat         | 68
> >> ++++++++++++++++++++++++++++++++++-------
> >> > >  edksetup.bat                    | 32 ++++++-------------
> >> > >  4 files changed, 145 insertions(+), 44 deletions(-)
> >> > >
> >> > > --
> >> > > 1.9.5.msysgit.1

Re: [edk2-devel] [patch 0/2] Edk2Setup: Enahnce edk2setup batch files

[Liming Gao]

Push @d31666211873086c058285f4a4f1933bc3c3428c..6759212fa69d5d266c2854ea6de44bfd3f7e370b

>-----Original Message-----
>From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
>Liming Gao
>Sent: Friday, June 28, 2019 9:12 AM
>To: Bi, Dandan <dandan.bi@intel.com>; Feng, Bob C <bob.c.feng@intel.com>;
>devel@edk2.groups.io
>Subject: Re: [edk2-devel] [patch 0/2] Edk2Setup: Enahnce edk2setup batch
>files
>
>Dandan:
>
> If you find any pre script to use --nt32 option, please remove them first, then
>do this change.
>
>>-----Original Message-----
>>From: Bi, Dandan
>>Sent: Friday, June 28, 2019 9:11 AM
>>To: Gao, Liming <liming.gao@intel.com>; Feng, Bob C
>><bob.c.feng@intel.com>; devel@edk2.groups.io
>>Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>>
>>Hi Liming and Bob,
>>
>>Thanks for the review. So we reach the agreement that remove the --nt32
>>flag, right? If so, I will address Liming's comments and then push these two
>>patches.
>>
>>
>>Thanks,
>>Dandan
>>
>>> -----Original Message-----
>>> From: Gao, Liming
>>> Sent: Thursday, June 27, 2019 11:17 PM
>>> To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan
>>> <dandan.bi@intel.com>; devel@edk2.groups.io
>>> Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>>>
>>> Yes. Those script needs to be updated together.
>>>
>>> > -----Original Message-----
>>> > From: Feng, Bob C
>>> > Sent: Thursday, June 27, 2019 11:14 PM
>>> > To: Gao, Liming <liming.gao@intel.com>; Bi, Dandan
>>> > <dandan.bi@intel.com>; devel@edk2.groups.io
>>> > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>>> >
>>> > OK.  I think it may break some pre-build script if the pre-build script have
>>> "edksetup --nt32"...
>>> >
>>> > -----Original Message-----
>>> > From: Gao, Liming
>>> > Sent: Thursday, June 27, 2019 10:48 PM
>>> > To: Feng, Bob C <bob.c.feng@intel.com>; Bi, Dandan
>>> > <dandan.bi@intel.com>; devel@edk2.groups.io
>>> > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>>> >
>>> > Bob:
>>> >   --nt32 option is added for Nt32Pkg. Now, Nt32Pkg has been removed.
>So,
>>> I think it is fine to remove --nt32 option.
>>> >
>>> > > -----Original Message-----
>>> > > From: Feng, Bob C
>>> > > Sent: Thursday, June 27, 2019 7:56 PM
>>> > > To: Bi, Dandan <dandan.bi@intel.com>; devel@edk2.groups.io
>>> > > Cc: Gao, Liming <liming.gao@intel.com>
>>> > > Subject: RE: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>>> > >
>>> > > The patches look good.
>>> > >
>>> > > I think removing --nt32 option is incompatible change. What about
>keep
>>> the --nt32 ?
>>> > >
>>> > > For the Patch 2 setup for different VS tool chains.
>>> > > Reviewed-by: Bob Feng <bob.c.feng@intel.com>
>>> > >
>>> > > Thanks,
>>> > > Bob
>>> > >
>>> > > -----Original Message-----
>>> > > From: Bi, Dandan
>>> > > Sent: Sunday, June 23, 2019 9:59 PM
>>> > > To: devel@edk2.groups.io
>>> > > Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming
>>> > > <liming.gao@intel.com>
>>> > > Subject: [patch 0/2] Edk2Setup: Enahnce edk2setup batch files
>>> > >
>>> > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1693
>>> > >
>>> > > Patch 1 remove nt32 related flags in bat files.
>>> > > Patch 2 setup for different VS tool chains.
>>> > >
>>> > > Cc: Bob Feng <bob.c.feng@intel.com>
>>> > > Cc: Liming Gao <liming.gao@intel.com> Dandan Bi (2):
>>> > >   Edk2: Remove nt32 related flag in bat files
>>> > >   Edk2Setup: Support different VS tool chain setup
>>> > >
>>> > >  BaseTools/get_vsvars.bat        | 42 +++++++++++++++++++++----
>>> > >  BaseTools/set_vsprefix_envs.bat | 47
>+++++++++++++++++++++++++-
>>-
>>> -
>>> > >  BaseTools/toolsetup.bat         | 68
>>> ++++++++++++++++++++++++++++++++++-------
>>> > >  edksetup.bat                    | 32 ++++++-------------
>>> > >  4 files changed, 145 insertions(+), 44 deletions(-)
>>> > >
>>> > > --
>>> > > 1.9.5.msysgit.1
>
>
>