From: "Zeng, Star" <star.zeng@intel.com>
To: "Duran, Leo" <leo.duran@amd.com>,
"edk2-devel@ml01.01.org" <edk2-devel@ml01.01.org>
Cc: "Singh, Brijesh" <brijesh.singh@amd.com>,
"Tian, Feng" <feng.tian@intel.com>,
Laszlo Ersek <lersek@redhat.com>,
"Zeng, Star" <star.zeng@intel.com>
Subject: Re: [PATCH v3 2/4] MdeModulePkg/Universal/CapsulePei: Add support for PCD PcdPteMemoryEncryptionAddressOrMask
Date: Wed, 22 Feb 2017 01:20:01 +0000 [thread overview]
Message-ID: <0C09AFA07DD0434D9E2A0C6AEB0483103B829F55@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <DM5PR12MB1243381629E51A92F232B522F9510@DM5PR12MB1243.namprd12.prod.outlook.com>
Shouldn't
((*PageFaultContext->PageFaultUplink[PageFaultContext->PageFaultIndex] & PageFaultContext->PhyMask) == Address)
be
(((*PageFaultContext->PageFaultUplink[PageFaultContext->PageFaultIndex] & ~(AddressSetMask & PAGING_4K_ADDRESS_MASK_64)) & PageFaultContext->PhyMask) == Address)
like you did at other place?
Thanks,
Star
-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Duran, Leo
Sent: Wednesday, February 22, 2017 12:43 AM
To: Zeng, Star <star.zeng@intel.com>; edk2-devel@ml01.01.org
Cc: Singh, Brijesh <brijesh.singh@amd.com>; Tian, Feng <feng.tian@intel.com>; Laszlo Ersek <lersek@redhat.com>
Subject: Re: [edk2] [PATCH v3 2/4] MdeModulePkg/Universal/CapsulePei: Add support for PCD PcdPteMemoryEncryptionAddressOrMask
Hi Star,
Please double-check the complete [PATCH v3 2/4].
Yes, there is a non-functional change where I did break a 'very long' line into 2 lines as you noted (I can put that back as it was before if so required).
However the intended functional changes are applied in the rest of the patch in lines where I reference 'AddressSetMask'.
As for [PATCH v3 4/4]
The intended functional changes are applied... please confirm, or please let me know what seems to be missing.
Thanks,
Leo.
> -----Original Message-----
> From: Zeng, Star [mailto:star.zeng@intel.com]
> Sent: Monday, February 20, 2017 12:05 AM
> To: Duran, Leo <leo.duran@amd.com>; edk2-devel@ml01.01.org
> Cc: Laszlo Ersek <lersek@redhat.com>; Feng Tian <feng.tian@intel.com>;
> Singh, Brijesh <brijesh.singh@amd.com>; star.zeng@intel.com
> Subject: Re: [edk2] [PATCH v3 2/4] MdeModulePkg/Universal/CapsulePei:
> Add support for PCD PcdPteMemoryEncryptionAddressOrMask
>
> Leo,
>
> Comments added inline.
>
> On 2017/2/17 5:02, Leo Duran wrote:
> > This PCD holds the address mask for page table entries when memory
> > encryption is enabled on AMD processors supporting the Secure
> > Encrypted Virtualization (SEV) feature.
> >
> > The mask is applied when 4GB tables are created (UefiCapsule.c), and
> > when the tables are expanded on-demand by page-faults above 4GB's
> (X64Entry.c).
> >
> > Cc: Feng Tian <feng.tian@intel.com>
> > Cc: Star Zeng <star.zeng@intel.com>
> > Cc: Laszlo Ersek <lersek@redhat.com>
> > Cc: Brijesh Singh <brijesh.singh@amd.com>
> > Contributed-under: TianoCore Contribution Agreement 1.0
> > Signed-off-by: Leo Duran <leo.duran@amd.com>
> > Reviewed-by: Star Zeng <star.zeng@intel.com>
> > ---
> > MdeModulePkg/Universal/CapsulePei/CapsulePei.inf | 2 ++
> > .../Universal/CapsulePei/Common/CommonHeader.h | 7 +++++++
> > MdeModulePkg/Universal/CapsulePei/UefiCapsule.c | 13 ++++++++----
> > MdeModulePkg/Universal/CapsulePei/X64/X64Entry.c | 23
> +++++++++++++++-------
> > 4 files changed, 34 insertions(+), 11 deletions(-)
> >
>
> [snipped]
>
> > diff --git a/MdeModulePkg/Universal/CapsulePei/X64/X64Entry.c
> > b/MdeModulePkg/Universal/CapsulePei/X64/X64Entry.c
> > index 5ad95d2..2197502 100644
> > --- a/MdeModulePkg/Universal/CapsulePei/X64/X64Entry.c
> > +++ b/MdeModulePkg/Universal/CapsulePei/X64/X64Entry.c
> > @@ -2,6 +2,8 @@
> > The X64 entrypoint is used to process capsule in long mode.
> >
> > Copyright (c) 2011 - 2016, Intel Corporation. All rights
> > reserved.<BR>
> > +Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>
> > +
> > This program and the accompanying materials are licensed and made
> > available under the terms and conditions of the BSD License which
> > accompanies this distribution. The full text of the license may be
> > found at @@ -29,6 +31,7 @@ typedef struct _PAGE_FAULT_CONTEXT {
> > UINT64 PhyMask;
> > UINTN PageFaultBuffer;
> > UINTN PageFaultIndex;
> > + UINT64 PteMemoryEncryptionAddressOrMask;
> > //
> > // Store the uplink information for each page being used.
> > //
> > @@ -114,6 +117,7 @@ AcquirePage (
> > )
> > {
> > UINTN Address;
> > + UINT64 AddressSetMask;
> >
> > Address = PageFaultContext->PageFaultBuffer + EFI_PAGES_TO_SIZE
> (PageFaultContext->PageFaultIndex);
> > ZeroMem ((VOID *) Address, EFI_PAGES_TO_SIZE (1)); @@ -121,14
> > +125,16 @@ AcquirePage (
> > //
> > // Cut the previous uplink if it exists and wasn't overwritten.
> > //
> > - if
> >
> >((PageFaultContext->PageFaultUplink[PageFaultContext->PageFaultIndex]
> > != NULL) &&
> > ((*PageFaultContext->PageFaultUplink[PageFaultContext-
> >PageFaultIndex]
> > & PageFaultContext->PhyMask) == Address)) {
> > + if ((PageFaultContext->PageFaultUplink[PageFaultContext-
> >PageFaultIndex] != NULL) &&
> > +
> > + ((*PageFaultContext->PageFaultUplink[PageFaultContext-
> >PageFaultInde
> > + x] & PageFaultContext->PhyMask) == Address)) {
>
> No real change at here except the line feed added.
> You were going to update code at here, but forgot to do the real change?
>
> Will you do similar change for [PATCH v3 4/4]
>
> Thanks,
> Star
>
> > *PageFaultContext->PageFaultUplink[PageFaultContext-
> >PageFaultIndex] = 0;
> > }
> >
> > //
> > // Link & Record the current uplink.
> > //
> > - *Uplink = Address | IA32_PG_P | IA32_PG_RW;
> > + AddressSetMask =
> > + PageFaultContext->PteMemoryEncryptionAddressOrMask;
> > + *Uplink = Address | (AddressSetMask &
> PAGING_4K_ADDRESS_MASK_64) |
> > + IA32_PG_P | IA32_PG_RW;
> >
> > PageFaultContext->PageFaultUplink[PageFaultContext->PageFaultIndex]
> > = Uplink;
> >
> > PageFaultContext->PageFaultIndex =
> > (PageFaultContext->PageFaultIndex + 1) % EXTRA_PAGE_TABLE_PAGES;
> @@ -153,6 +159,7 @@ PageFaultHandler (
> > UINT64 *PageTable;
> > UINT64 PFAddress;
> > UINTN PTIndex;
> > + UINT64 AddressSetMask;
> >
> > //
> > // Get the IDT Descriptor.
> > @@ -163,6 +170,7 @@ PageFaultHandler (
> > //
> > PageFaultContext = (PAGE_FAULT_CONTEXT *) (UINTN) (Idtr.Base -
> sizeof (PAGE_FAULT_CONTEXT));
> > PhyMask = PageFaultContext->PhyMask;
> > + AddressSetMask =
> > + PageFaultContext->PteMemoryEncryptionAddressOrMask;
> >
> > PFAddress = AsmReadCr2 ();
> > DEBUG ((EFI_D_ERROR, "CapsuleX64 - PageFaultHandler: Cr2 -
> > %lx\n", PFAddress)); @@ -179,19 +187,19 @@ PageFaultHandler (
> > if ((PageTable[PTIndex] & IA32_PG_P) == 0) {
> > AcquirePage (PageFaultContext, &PageTable[PTIndex]);
> > }
> > - PageTable = (UINT64*)(UINTN)(PageTable[PTIndex] & PhyMask);
> > + PageTable = (UINT64*)(UINTN)((PageTable[PTIndex] &
> ~(AddressSetMask
> > + & PAGING_4K_ADDRESS_MASK_64)) & PhyMask);
> > PTIndex = BitFieldRead64 (PFAddress, 30, 38);
> > // PDPTE
> > if (PageFaultContext->Page1GSupport) {
> > - PageTable[PTIndex] = (PFAddress & ~((1ull << 30) - 1)) | IA32_PG_P |
> IA32_PG_RW | IA32_PG_PS;
> > + PageTable[PTIndex] = ((PFAddress | (AddressSetMask &
> > + PAGING_1G_ADDRESS_MASK_64)) & ~((1ull << 30) - 1)) | IA32_PG_P |
> > + IA32_PG_RW | IA32_PG_PS;
> > } else {
> > if ((PageTable[PTIndex] & IA32_PG_P) == 0) {
> > AcquirePage (PageFaultContext, &PageTable[PTIndex]);
> > }
> > - PageTable = (UINT64*)(UINTN)(PageTable[PTIndex] & PhyMask);
> > + PageTable = (UINT64*)(UINTN)((PageTable[PTIndex] &
> > + ~(AddressSetMask & PAGING_4K_ADDRESS_MASK_64)) & PhyMask);
> > PTIndex = BitFieldRead64 (PFAddress, 21, 29);
> > // PD
> > - PageTable[PTIndex] = (PFAddress & ~((1ull << 21) - 1)) | IA32_PG_P |
> IA32_PG_RW | IA32_PG_PS;
> > + PageTable[PTIndex] = ((PFAddress | (AddressSetMask &
> > + PAGING_2M_ADDRESS_MASK_64)) & ~((1ull << 21) - 1)) | IA32_PG_P |
> > + IA32_PG_RW | IA32_PG_PS;
> > }
> >
> > return NULL;
> > @@ -244,6 +252,7 @@ _ModuleEntryPoint (
> > // Hook page fault handler to handle >4G request.
> > //
> > PageFaultIdtTable.PageFaultContext.Page1GSupport =
> > EntrypointContext->Page1GSupport;
> > +
> PageFaultIdtTable.PageFaultContext.PteMemoryEncryptionAddressOrMask
> > + = EntrypointContext->PteMemoryEncryptionAddressOrMask;
> > IdtEntry = (IA32_IDT_GATE_DESCRIPTOR *) (X64Idtr.Base + (14 *
> > sizeof
> (IA32_IDT_GATE_DESCRIPTOR)));
> > HookPageFaultHandler (IdtEntry,
> > &(PageFaultIdtTable.PageFaultContext));
> >
> > @@ -298,4 +307,4 @@ _ModuleEntryPoint (
> > //
> > ASSERT (FALSE);
> > return EFI_SUCCESS;
> > -}
> > \ No newline at end of file
> > +}
> >
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2017-02-22 1:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-16 21:02 [PATCH v3 0/4] Add PCD PcdPteMemoryEncryptionAddressOrMask Leo Duran
2017-02-16 21:02 ` [PATCH v3 1/4] MdeModulePkg: " Leo Duran
2017-02-16 21:02 ` [PATCH v3 2/4] MdeModulePkg/Universal/CapsulePei: Add support for " Leo Duran
2017-02-20 6:04 ` Zeng, Star
2017-02-21 16:42 ` Duran, Leo
2017-02-22 1:20 ` Zeng, Star [this message]
2017-02-22 15:07 ` Duran, Leo
2017-02-16 21:02 ` [PATCH v3 3/4] UefiCpuPkg/Universal/Acpi/S3Resume2Pei: " Leo Duran
2017-02-16 21:02 ` [PATCH v3 4/4] MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe: " Leo Duran
2017-02-16 21:56 ` [PATCH v3 0/4] Add " Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0C09AFA07DD0434D9E2A0C6AEB0483103B829F55@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox