Re: SNP transmit print

["Zeng, Star" <star.zeng@intel.com>]

Cc Ting, Siyuan and Jiaxin.

Thanks,
Star
-----Original Message-----
From: Udit Kumar [mailto:udit.kumar@nxp.com] 
Sent: Friday, September 22, 2017 7:04 PM
To: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>; edk2-devel@lists.01.org
Cc: Tian, Feng <feng.tian@intel.com>; Zeng, Star <star.zeng@intel.com>
Subject: RE: SNP transmit print

Thanks Meenakshi for digging a bit more 

If we have use like below
Library/DxeNetLib/DxeNetLib.c
Status = Snp->Transmit (Snp, 0, Length, Packet, NULL, NULL, NULL);
    if ((Status != EFI_SUCCESS) && (Status != EFI_NOT_READY)) {
      Status = EFI_DEVICE_ERROR;
      break;
    }
Then, we can simple put print when Status is EFI_DEVICE_ERROR;

But with below We are retrying once ☹ ,  What I think if first time if you got error EFI_NOT_READY, then after MnpRecycleTxBuf we likely not to get this error. 
I am not 100% sure here. 

What I think, in MdeModulePkg/Universal/Network/SnpDxe/Transmit.c
Have print only for EFI_NOT_READY. 
And in MdeModulePkg/Universal/Network/MnpDxe/MnpIo.c, print error as well for second case. 
Hope this helps 

Thanks
Udit

> -----Original Message-----
> From: Meenakshi Aggarwal
> Sent: Friday, September 22, 2017 3:56 PM
> To: Udit Kumar <udit.kumar@nxp.com>; edk2-devel@lists.01.org
> Cc: feng.tian@intel.com; star.zeng@intel.com
> Subject: RE: SNP transmit print
> 
> Hi Udit,
> 
> Yes, I think we should print this message is Status is 
> EFI_DEVICE_ERROR because in case of EFI_NOT_READY, we are retrying:
> 
>   //
>   // Transmit the packet through SNP.
>   //
>   Status = Snp->Transmit (
>                   Snp,
>                   HeaderSize,
>                   Length,
>                   Packet,
>                   TxData->SourceAddress,
>                   TxData->DestinationAddress,
>                   &ProtocolType
>                   );
>   if (Status == EFI_NOT_READY) {
>     Status = MnpRecycleTxBuf (MnpDeviceData);
>     if (EFI_ERROR (Status)) {
>       Token->Status = EFI_DEVICE_ERROR;
>       goto SIGNAL_TOKEN;
>     }
> 
>     DEBUG ((EFI_D_ERROR, "Snp->Transmit  retry\n"));
>     Status = Snp->Transmit (
>                     Snp,
>                     HeaderSize,
>                     Length,
>                     Packet,
>                     TxData->SourceAddress,
>                     TxData->DestinationAddress,
>                     &ProtocolType
>                     );
>   }
> 
> (MdeModulePkg/Universal/Network/MnpDxe/MnpIo.c)
> 
> 
> Please suggest if we can remove this print in case of BUSY status.
> 
> Thanks,
> Meenakshi
> 
> > -----Original Message-----
> > From: Udit Kumar
> > Sent: Thursday, September 21, 2017 5:21 PM
> > To: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>; edk2- 
> > devel@lists.01.org
> > Subject: RE: SNP transmit print
> >
> > I think these error prints should be check against Status
> >
> > Regards
> > Udit
> >
> > > -----Original Message-----
> > > From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On 
> > > Behalf Of Meenakshi Aggarwal
> > > Sent: Thursday, September 21, 2017 3:36 PM
> > > To: edk2-devel@lists.01.org
> > > Subject: [edk2] SNP transmit print
> > >
> > > Hi,
> > >
> > >
> > > While performing tftp using PCI interface, below message is coming
> > > continuously:
> > >
> > > Snp->undi.transmit()  8000h:4h
> > >
> > > Snp->undi.transmit()  8000h:4h
> > > [======================================> ]   34812 Kb
> > > Snp->undi.transmit()  8000h:4h
> > >
> > > Snp->undi.transmit()  8000h:4h
> > >
> > > Snp->undi.transmit()  8000h:4h
> > >
> > > Snp->undi.transmit()  8000h:4h
> > >
> > >
> > > It is coming from file
> > "MdeModulePkg/Universal/Network/SnpDxe/Transmit.c"
> > >
> > >   DEBUG (
> > >     (EFI_D_ERROR,
> > >     "\nSnp->undi.transmit()  %xh:%xh\n",
> > >     Snp->Cdb.StatFlags,
> > >     Snp->Cdb.StatCode)
> > >     );
> > >
> > >
> > > I want to know if it is really an error message because tftp and 
> > > ping are working perfectly, but this error message is coming.
> > >
> > >
> > > Thanks,
> > > Meenakshi
> > >
> > >
> > >
> > > _______________________________________________
> > > edk2-devel mailing list
> > > edk2-devel@lists.01.org
> > > https://lists.01.org/mailman/listinfo/edk2-devel