Re: [PATCH] MdeModulePkg/Library/BaseSerialPortLib16550: Ensure FIFO Polled Mode

["Zeng, Star" <star.zeng@intel.com>]

Reviewed-by: Star Zeng <star.zeng@intel.com>

Just a little curious about
1. Did you meet real issue without this patch?
2. what is the default value of IER in your case?


Thanks,
Star
-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Leo Duran
Sent: Friday, May 25, 2018 3:08 AM
To: edk2-devel@lists.01.org
Cc: Dong, Eric <eric.dong@intel.com>; Zeng, Star <star.zeng@intel.com>
Subject: [edk2] [PATCH] MdeModulePkg/Library/BaseSerialPortLib16550: Ensure FIFO Polled Mode

Put the UART in FIFO Polled Mode by clearing IER after setting FCR.
Also, add comments to show DLAB state for registers 0 and 1.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Cc: Star Zeng <star.zeng@intel.com>
CC: Eric Dong <eric.dong@intel.com>
---
 .../BaseSerialPortLib16550/BaseSerialPortLib16550.c      | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
index 0ccac96..6532c4d 100644
--- a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
+++ b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
@@ -3,6 +3,8 @@
 
   (C) Copyright 2014 Hewlett-Packard Development Company, L.P.<BR>
   Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
+  Copyright (c) 2018, AMD Incorporated. All rights reserved.<BR>
+
   This program and the accompanying materials
   are licensed and made available under the terms and conditions of the BSD License
   which accompanies this distribution.  The full text of the license may be found at
@@ -30,10 +32,11 @@
 //
 // 16550 UART register offsets and bitfields
 //
-#define R_UART_RXBUF          0
-#define R_UART_TXBUF          0
-#define R_UART_BAUD_LOW       0
-#define R_UART_BAUD_HIGH      1
+#define R_UART_RXBUF          0   // LCR_DLAB = 0
+#define R_UART_TXBUF          0   // LCR_DLAB = 0
+#define R_UART_BAUD_LOW       0   // LCR_DLAB = 1
+#define R_UART_BAUD_HIGH      1   // LCR_DLAB = 1
+#define R_UART_IER            1   // LCR_DLAB = 0
 #define R_UART_FCR            2
 #define   B_UART_FCR_FIFOE    BIT0
 #define   B_UART_FCR_FIFO64   BIT5
@@ -554,6 +557,11 @@ SerialPortInitialize (
   SerialPortWriteRegister (SerialRegisterBase, R_UART_FCR, (UINT8)(PcdGet8 (PcdSerialFifoControl) & (B_UART_FCR_FIFOE | B_UART_FCR_FIFO64)));
 
   //
+  // Set FIFO Polled Mode by clearing IER after setting FCR
+  //
+  SerialPortWriteRegister (SerialRegisterBase, R_UART_IER, 0x00);
+
+  //
   // Put Modem Control Register(MCR) into its reset state of 0x00.
   //  
   SerialPortWriteRegister (SerialRegisterBase, R_UART_MCR, 0x00);
-- 
2.7.4

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel