Re: [PATCH v3 1/7] MdeModulePkg: introduce PE/COFF image emulator protocol

["Zeng, Star" <star.zeng@intel.com>]

Yes. This idea also came to my mind last night, then no need introduce PeCoffEmulatorDxe and no platform change is needed.

Thanks,
Star
-----Original Message-----
From: Kinney, Michael D 
Sent: Thursday, September 27, 2018 1:32 AM
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>; Zeng, Star <star.zeng@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>
Cc: edk2-devel@lists.01.org; Zimmer, Vincent <vincent.zimmer@intel.com>; Richardson, Brian <brian.richardson@intel.com>; Andrew Fish <afish@apple.com>; Leif Lindholm <leif.lindholm@linaro.org>; Dong, Eric <eric.dong@intel.com>; Ni, Ruiyu <ruiyu.ni@intel.com>; Gao, Liming <liming.gao@intel.com>; Carsey, Jaben <jaben.carsey@intel.com>; Shi, Steven <steven.shi@intel.com>
Subject: RE: [PATCH v3 1/7] MdeModulePkg: introduce PE/COFF image emulator protocol

Hi Ard,

I think this registration protocol would be a new protocol in the MdeModulePkg and the protocol would be produced by the DXE Core.  The emulation drivers, including EBC would consume this protocol to register their services.  This removes the need for the DXE Core to do a Register Protocol Notify event for the emulator protocol.  The DXE Core would build a table of registered services, so it can quickly loop through them to check if an emulator supports a specific PE/COFF image or not.

Best regards,

Mike

> -----Original Message-----
> From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org]
> Sent: Wednesday, September 26, 2018 3:14 AM
> To: Zeng, Star <star.zeng@intel.com>
> Cc: edk2-devel@lists.01.org; Zimmer, Vincent 
> <vincent.zimmer@intel.com>; Richardson, Brian 
> <brian.richardson@intel.com>; Kinney, Michael D 
> <michael.d.kinney@intel.com>; Andrew Fish <afish@apple.com>; Leif 
> Lindholm <leif.lindholm@linaro.org>; Dong, Eric <eric.dong@intel.com>; 
> Ni, Ruiyu <ruiyu.ni@intel.com>; Gao, Liming <liming.gao@intel.com>; 
> Carsey, Jaben <jaben.carsey@intel.com>; Shi, Steven 
> <steven.shi@intel.com>
> Subject: Re: [PATCH v3 1/7] MdeModulePkg: introduce PE/COFF image 
> emulator protocol
> 
> On Wed, 26 Sep 2018 at 12:07, Zeng, Star <star.zeng@intel.com> wrote:
> >
> > A little late feedback. Just an idea.
> >
> > Do you think whether it can make the consumer simpler
> like below or not?
> >
> > Add a new API RegisterInterfaces in the protocol and
> add a wrapper driver PeCoffEmulatorDxe.
> > The emulators can call RegisterInterfaces, and
> consumer will call other APIs simply, PeCoffEmulatorDxe will be a 
> wrapper as manager.
> >
> > typedef
> > EFI_STATUS
> > (EFIAPI
> *EDKII_PECOFF_IMAGE_EMULATOR_REGISTER_INTERFACES) (
> >   IN EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL    *This,
> >   IN EDKII_PECOFF_IMAGE_EMULATOR_IS_IMAGE_SUPPORTED
> IsImageSupported,
> >   IN EDKII_PECOFF_IMAGE_EMULATOR_REGISTER_IMAGE
> RegisterImage,
> >   IN EDKII_PECOFF_IMAGE_EMULATOR_UNREGISTER_IMAGE
> UnregisterImage
> >   );
> >
> > typedef struct _EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL {
> >   EDKII_PECOFF_IMAGE_EMULATOR_REGISTER_INTERFACES
> RegisterInterfaces;
> >   EDKII_PECOFF_IMAGE_EMULATOR_IS_IMAGE_SUPPORTED
> IsImageSupported;
> >   EDKII_PECOFF_IMAGE_EMULATOR_REGISTER_IMAGE
> RegisterImage;
> >   EDKII_PECOFF_IMAGE_EMULATOR_UNREGISTER_IMAGE
> UnregisterImage;
> > } EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL;
> >
> 
> Hi Star,
> 
> Thanks for taking a look.
> 
> I tried to avoid introducing new drivers or library classes because it 
> will break existing platforms that incorporate EbcDxe.
> Do you think
> this is not an issue?
> 
> > -----Original Message-----
> > From: Ard Biesheuvel
> [mailto:ard.biesheuvel@linaro.org]
> > Sent: Friday, September 21, 2018 7:02 AM
> > To: edk2-devel@lists.01.org
> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>;
> Zimmer, Vincent <vincent.zimmer@intel.com>; Richardson, Brian 
> <brian.richardson@intel.com>; Kinney, Michael D 
> <michael.d.kinney@intel.com>; Andrew Fish <afish@apple.com>; Leif 
> Lindholm <leif.lindholm@linaro.org>; Zeng, Star <star.zeng@intel.com>; 
> Dong, Eric <eric.dong@intel.com>; Ni, Ruiyu <ruiyu.ni@intel.com>; Gao, 
> Liming <liming.gao@intel.com>; Carsey, Jaben <jaben.carsey@intel.com>; 
> Shi, Steven <steven.shi@intel.com>
> > Subject: [PATCH v3 1/7] MdeModulePkg: introduce
> PE/COFF image emulator protocol
> >
> > Introduce a protocol that can be invoked by the image
> loading services to execute foreign architecture PE/COFF images via an 
> emulator.
> >
> > Contributed-under: TianoCore Contribution Agreement
> 1.1
> > Signed-off-by: Ard Biesheuvel
> <ard.biesheuvel@linaro.org>
> > ---
> >  MdeModulePkg/Include/Protocol/PeCoffImageEmulator.h |
> 102 ++++++++++++++++++++
> >  MdeModulePkg/MdeModulePkg.dec                       |
> 4 +
> >  2 files changed, 106 insertions(+)
> >
> > diff --git
> a/MdeModulePkg/Include/Protocol/PeCoffImageEmulator.h
> b/MdeModulePkg/Include/Protocol/PeCoffImageEmulator.h
> > new file mode 100644
> > index 000000000000..27bad556209c
> > --- /dev/null
> > +++
> b/MdeModulePkg/Include/Protocol/PeCoffImageEmulator.h
> > @@ -0,0 +1,102 @@
> > +/** @file
> > +  Copyright (c) 2018, Linaro, Ltd. All rights
> reserved.<BR>
> > +
> > +  This program and the accompanying materials are
> licensed and made
> > + available  under the terms and conditions of the BSD
> License which
> > + accompanies this  distribution.  The full text of
> the license may be
> > + found at  http://opensource.org/licenses/bsd-
> license.php
> > +
> > +  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON
> AN "AS IS" BASIS,
> > + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND,
> EITHER EXPRESS OR IMPLIED.
> > +
> > +**/
> > +
> > +#ifndef PECOFF_IMAGE_EMULATOR_PROTOCOL_GUID_H
> > +#define PECOFF_IMAGE_EMULATOR_PROTOCOL_GUID_H
> > +
> > +#define EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL_GUID \
> > +  { 0x96F46153, 0x97A7, 0x4793, { 0xAC, 0xC1, 0xFA,
> 0x19, 0xBF, 0x78,
> > +0xEA, 0x97 } }
> > +
> > +typedef struct _EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL
> > +EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL;
> > +
> > +/**
> > +  Check whether the emulator supports executing a
> certain PE/COFF image
> > +
> > +  @param[in] This         This pointer for
> EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL
> > +                          structure  @param[in] MachineType  The 
> > + machine type for which
> the image was built
> > +  @param[in] ImageType    Whether the image is an
> application, a boot time
> > +                          driver or a runtime driver.
> > +  @param[in] DevicePath   Path to device where the
> image originated
> > +                          (e.g., a PCI option ROM)
> > +
> > +  @retval TRUE            The image is supported by
> the emulator
> > +  @retval FALSE           The image is not supported
> by the emulator.
> > +**/
> > +typedef
> > +BOOLEAN
> > +(EFIAPI
> *EDKII_PECOFF_IMAGE_EMULATOR_IS_IMAGE_SUPPORTED) (
> > +  IN  EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL    *This,
> > +  IN  UINT16
> MachineType,
> > +  IN  UINT16
> ImageType,
> > +  IN  EFI_DEVICE_PATH_PROTOCOL
> *DevicePath   OPTIONAL
> > +  );
> > +
> > +/**
> > +  Register a supported PE/COFF image with the
> emulator. After this call
> > +  completes successfully, the PE/COFF image may be
> started as usual,
> > +and
> > +  it is the responsibility of the emulator
> implementation that any
> > +branch
> > +  into the code section of the image (including
> returns from functions
> > +called
> > +  from the foreign code) is executed as if it were
> running on the
> > +machine
> > +  type it was built for.
> > +
> > +  @param[in]      This          This pointer for
> > +
> EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL structure
> > +  @param[in]      ImageBase     The base address in
> memory of the PE/COFF image
> > +  @param[in]      ImageSize     The size in memory of
> the PE/COFF image
> > +  @param[in,out]  EntryPoint    The entry point of
> the PE/COFF image. Passed by
> > +                                reference so that the
> emulator may modify it.
> > +
> > +  @retval EFI_SUCCESS           The image was
> registered with the emulator and
> > +                                can be started as
> usual.
> > +  @retval other                 The image could not
> be registered.
> > +
> > +  If the PE/COFF machine type or image type are not
> supported by the
> > +emulator,
> > +  then ASSERT().
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI *EDKII_PECOFF_IMAGE_EMULATOR_REGISTER_IMAGE)
> (
> > +  IN      EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL
> *This,
> > +  IN      EFI_PHYSICAL_ADDRESS
> ImageBase,
> > +  IN      UINT64
> ImageSize,
> > +  IN  OUT EFI_IMAGE_ENTRY_POINT
> *EntryPoint
> > +  );
> > +
> > +/**
> > +  Unregister a PE/COFF image that has been registered
> with the emulator.
> > +  This should be done before the image is unloaded
> from memory.
> > +
> > +  @param[in] This         This pointer for
> EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL
> > +                          structure
> > +  @param[in] ImageBase    The base address in memory
> of the PE/COFF image
> > +
> > +  @retval EFI_SUCCESS     The image was unregistered
> with the emulator.
> > +  @retval other           Image could not be
> unloaded.
> > +**/
> > +typedef
> > +EFI_STATUS
> > +(EFIAPI
> *EDKII_PECOFF_IMAGE_EMULATOR_UNREGISTER_IMAGE) (
> > +  IN  EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL    *This,
> > +  IN  EFI_PHYSICAL_ADDRESS
> ImageBase
> > +  );
> > +
> > +typedef struct _EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL
> {
> > +  EDKII_PECOFF_IMAGE_EMULATOR_IS_IMAGE_SUPPORTED
> IsImageSupported;
> > +  EDKII_PECOFF_IMAGE_EMULATOR_REGISTER_IMAGE
> RegisterImage;
> > +  EDKII_PECOFF_IMAGE_EMULATOR_UNREGISTER_IMAGE
> UnregisterImage;
> > +} EDKII_PECOFF_IMAGE_EMULATOR_PROTOCOL;
> > +
> > +extern EFI_GUID
> gEdkiiPeCoffImageEmulatorProtocolGuid;
> > +
> > +#endif
> > diff --git a/MdeModulePkg/MdeModulePkg.dec
> b/MdeModulePkg/MdeModulePkg.dec index
> 6a6d9660edc2..be307329f901 100644
> > --- a/MdeModulePkg/MdeModulePkg.dec
> > +++ b/MdeModulePkg/MdeModulePkg.dec
> > @@ -617,6 +617,10 @@
> >
> >    ## Include/Protocol/AtaAtapiPolicy.h
> >    gEdkiiAtaAtapiPolicyProtocolGuid = { 0xe59cd769,
> 0x5083, 0x4f26,{ 0x90, 0x94, 0x6c, 0x91, 0x9f, 0x91, 0x6c, 0x4e } }
> > +
> > +  ## Include/Protocol/PeCoffImageEmulator.h
> > +  gEdkiiPeCoffImageEmulatorProtocolGuid = {
> 0x96f46153, 0x97a7, 0x4793,
> > + { 0xac, 0xc1, 0xfa, 0x19, 0xbf, 0x78, 0xea, 0x97 } }
> > +
> >  #
> >  # [Error.gEfiMdeModulePkgTokenSpaceGuid]
> >  #   0x80000001 | Invalid value provided.
> > --
> > 2.17.1
> >