* [PATCH v1 2/2] DynamicTablesPkg: Add SSDT CMN-600 Table generator
2020-09-22 14:08 [PATCH v1 0/2] Support for dynamic CMN-600 AML generation Sami Mujawar
2020-09-22 14:08 ` [PATCH v1 1/2] MdePkg: Definitions for Extended Interrupt Flags Sami Mujawar
@ 2020-09-22 14:08 ` Sami Mujawar
2020-09-22 15:06 ` [edk2-devel] " Alexei Fedorov
2020-09-22 15:05 ` [edk2-devel] [PATCH v1 0/2] Support for dynamic CMN-600 AML generation Alexei Fedorov
2 siblings, 1 reply; 8+ messages in thread
From: Sami Mujawar @ 2020-09-22 14:08 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, michael.d.kinney, gaoliming, zhiguang.liu,
Alexei.Fedorov, pierre.gondois, Matteo.Carlini, Ben.Adderson, nd
From: Pierre Gondois <pierre.gondois@arm.com>
The Generic ACPI for Arm Components 1.0 Platform Design
Document, s2.6.4 "ASL code examples" provides information
to describe an Arm CoreLink CMN-600 Coherent Mesh Network
using an ASL definition block table.
The SSDT CMN-600 Table Generator uses the Configuration
Manager protocol to obtain the following information about
the CMN-600 device on the platform:
- the PERIPHBASE address location and address range;
- the ROOTNODEBASE address location;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
The CMN-600 mesh is described using the CM_ARM_CMN_600_INFO
and CM_ARM_EXTENDED_INTERRUPT structures in the Configuration
Manager.
The SSDT CMN-600 Table generator:
- gets the CMN-600 hardware information
from the configuration manager.
- uses the AmlLib interfaces to parse the AML
template BLOB and construct an AML tree.
- uses the AmlLib to update:
- the "_UID" value;
- the address location and range of the PERIPHBASE;
- the address location of the ROOTNODEBASE;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
- serializes the AML tree to an output buffer.
This output buffer contains the fixed-up AML code,
which is then installed as an ACPI SSDT table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Co-authored-by: Sami Mujawar <sami.mujawar@arm.com>
---
DynamicTablesPkg/DynamicTables.dsc.inc | 2 +
DynamicTablesPkg/DynamicTablesPkg.ci.yaml | 4 +
DynamicTablesPkg/Include/AcpiTableGenerator.h | 5 +
DynamicTablesPkg/Include/ArmNameSpaceObjects.h | 64 +-
DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600Generator.c | 701 ++++++++++++++++++++
DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600Generator.h | 51 ++
DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600LibArm.inf | 34 +
DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600Template.asl | 81 +++
8 files changed, 936 insertions(+), 6 deletions(-)
diff --git a/DynamicTablesPkg/DynamicTables.dsc.inc b/DynamicTablesPkg/DynamicTables.dsc.inc
index 7fb14d8d1463f7d4502fd3a7708bc94bc336357d..fa33b7ee67e615e236cb13224c859594566df19f 100644
--- a/DynamicTablesPkg/DynamicTables.dsc.inc
+++ b/DynamicTablesPkg/DynamicTables.dsc.inc
@@ -34,6 +34,7 @@ [Components.common]
# AML Fixup
DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtSerialPortLibArm/SsdtSerialPortLibArm.inf
+ DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600LibArm.inf
#
# Dynamic Table Factory Dxe
@@ -53,6 +54,7 @@ [Components.common]
# AML Fixup
NULL|DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtSerialPortLibArm/SsdtSerialPortLibArm.inf
+ NULL|DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600LibArm.inf
}
#
diff --git a/DynamicTablesPkg/DynamicTablesPkg.ci.yaml b/DynamicTablesPkg/DynamicTablesPkg.ci.yaml
index c0d09e79fdf7f6003b5bbda45abc82a0caf4e53f..52c8c2ab4aefb21bea0289a4fd02209ae937a221 100644
--- a/DynamicTablesPkg/DynamicTablesPkg.ci.yaml
+++ b/DynamicTablesPkg/DynamicTablesPkg.ci.yaml
@@ -70,6 +70,7 @@
# in matching files
"ExtendWords": [
"ARMHB", # ARMHB000
+ "ARMHC", # ARMHC600
"ARMLTD",
"EISAID",
"CCIDX",
@@ -81,8 +82,11 @@
"lgreater",
"lless",
"MPIDR",
+ "PERIPHBASE",
"pytool",
"Roadmap",
+ "ROOTNODEBASE",
+ "ssdtcmn",
"ssdtserialporttemplate",
"SMMUV",
"standardised",
diff --git a/DynamicTablesPkg/Include/AcpiTableGenerator.h b/DynamicTablesPkg/Include/AcpiTableGenerator.h
index ef5018c312c1abbc205a06b037ffd6063cf02f0a..352331d6dc957b664d31d55b50efcce5b90d8ada 100644
--- a/DynamicTablesPkg/Include/AcpiTableGenerator.h
+++ b/DynamicTablesPkg/Include/AcpiTableGenerator.h
@@ -59,6 +59,10 @@ The Dynamic Tables Framework implements the following ACPI table generators:
The SSDT Serial generator collates the Serial port information
from the Configuration Manager and patches the SSDT Serial Port
template to build the SSDT Serial port table.
+ - SSDT CMN-600:
+ The SSDT CMN-600 generator collates the CMN-600 information
+ from the Configuration Manager and patches the SSDT CMN-600
+ template to build the SSDT CMN-600 table.
*/
/** The ACPI_TABLE_GENERATOR_ID type describes ACPI table generator ID.
@@ -83,6 +87,7 @@ typedef enum StdAcpiTableId {
EStdAcpiTableIdPptt, ///< PPTT Generator
EStdAcpiTableIdSrat, ///< SRAT Generator
EStdAcpiTableIdSsdtSerialPort, ///< SSDT Serial-Port Generator
+ EStdAcpiTableIdSsdtCmn600, ///< SSDT Cmn-600 Generator
EStdAcpiTableIdMax
} ESTD_ACPI_TABLE_ID;
diff --git a/DynamicTablesPkg/Include/ArmNameSpaceObjects.h b/DynamicTablesPkg/Include/ArmNameSpaceObjects.h
index b2534a6505d6fb695f0751bbb09d365bd93d092e..f0654866444e5497a010f7e7177199604f5d32b6 100644
--- a/DynamicTablesPkg/Include/ArmNameSpaceObjects.h
+++ b/DynamicTablesPkg/Include/ArmNameSpaceObjects.h
@@ -57,6 +57,7 @@ typedef enum ArmObjectID {
EArmObjDeviceHandlePci, ///< 33 - Device Handle Pci
EArmObjGenericInitiatorAffinityInfo, ///< 34 - Generic Initiator Affinity
EArmObjSerialPortInfo, ///< 35 - Generic Serial Port Info
+ EArmObjCmn600Info, ///< 36 - CMN-600 Info
EArmObjMax
} EARM_OBJECT_ID;
@@ -653,18 +654,37 @@ typedef struct CmArmIdMapping {
UINT32 Flags;
} CM_ARM_ID_MAPPING;
-/** A structure that describes the
- SMMU interrupts for the Platform.
-
- ID: EArmObjSmmuInterruptArray
+/** A structure that describes the Arm
+ Generic Interrupts.
*/
-typedef struct CmArmSmmuInterrupt {
+typedef struct CmArmGenericInterrupt {
/// Interrupt number
UINT32 Interrupt;
/// Flags
UINT32 Flags;
-} CM_ARM_SMMU_INTERRUPT;
+} CM_ARM_GENERIC_INTERRUPT;
+
+/** A structure that describes the SMMU interrupts for the Platform.
+
+ Interrupt Interrupt number.
+ Flags Interrupt flags as defined for SMMU node.
+
+ ID: EArmObjSmmuInterruptArray
+*/
+typedef CM_ARM_GENERIC_INTERRUPT CM_ARM_SMMU_INTERRUPT;
+
+/** A structure that describes the AML Extended Interrupts.
+
+ Interrupt Interrupt number.
+ Flags Interrupt flags as defined by the Interrupt
+ Vector Flags (Byte 3) of the Extended Interrupt
+ resource descriptor.
+ See EFI_ACPI_EXTENDED_INTERRUPT_FLAG_xxx in Acpi10.h
+
+ ID: EArmObjExtendedInterruptInfo
+*/
+typedef CM_ARM_GENERIC_INTERRUPT CM_ARM_EXTENDED_INTERRUPT;
/** A structure that describes the Processor Hierarchy Node (Type 0) in PPTT
@@ -825,6 +845,38 @@ typedef struct CmArmGenericInitiatorAffinityInfo {
CM_OBJECT_TOKEN DeviceHandleToken;
} CM_ARM_GENERIC_INITIATOR_AFFINITY_INFO;
+/** A structure that describes the CMN-600 hardware.
+
+ ID: EArmObjCmn600Info
+*/
+typedef struct CmArmCmn600Info {
+ /// The PERIPHBASE address.
+ /// Corresponds to the Configuration Node Region (CFGR) base address.
+ UINT64 PeriphBaseAddress;
+
+ /// The PERIPHBASE address length.
+ /// Corresponds to the CFGR base address length.
+ UINT64 PeriphBaseAddressLength;
+
+ /// The ROOTNODEBASE address.
+ /// Corresponds to the Root node (ROOT) base address.
+ UINT64 RootNodeBaseAddress;
+
+ /// The Debug and Trace Logic Controller (DTC) count.
+ /// CMN-600 can have maximum 4 DTCs.
+ UINT8 DtcCount;
+
+ /// DTC Interrupt list.
+ /// The first interrupt resource descriptor pertains to
+ /// DTC[0], the second to DTC[1] and so on.
+ /// DtcCount determines the number of DTC Interrupts that
+ /// are populated. If DTC count is 2 then DtcInterrupt[2]
+ /// and DtcInterrupt[3] are ignored.
+ /// Note: The size of CM_ARM_CMN_600_INFO structure remains
+ /// constant and does not vary with the DTC count.
+ CM_ARM_EXTENDED_INTERRUPT DtcInterrupt[4];
+} CM_ARM_CMN_600_INFO;
+
#pragma pack()
#endif // ARM_NAMESPACE_OBJECTS_H_
diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600Generator.c b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600Generator.c
new file mode 100644
index 0000000000000000000000000000000000000000..a2ff3387a807bad81c4c62b843d797020b677548
--- /dev/null
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600Generator.c
@@ -0,0 +1,701 @@
+/** @file
+ SSDT CMN-600 AML Table Generator.
+
+ Copyright (c) 2020, Arm Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Reference(s):
+ - Arm CoreLink CMN-600 Coherent Mesh Network Technical Reference Manual r3p0
+ - Generic ACPI for Arm Components 1.0 Platform Design Document
+**/
+
+#include <IndustryStandard/DebugPort2Table.h>
+#include <Library/AcpiLib.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/AcpiTable.h>
+
+// Module specific include files.
+#include <AcpiTableGenerator.h>
+#include <ConfigurationManagerObject.h>
+#include <ConfigurationManagerHelper.h>
+#include <Library/AmlLib/AmlLib.h>
+#include <Library/TableHelperLib.h>
+#include <Protocol/ConfigurationManagerProtocol.h>
+#include "SsdtCmn600Generator.h"
+
+/** C array containing the compiled AML template.
+ This symbol is defined in the auto generated C file
+ containing the AML bytecode array.
+*/
+extern CHAR8 ssdtcmn600template_aml_code[];
+
+/** SSDT CMN-600 Table Generator.
+
+ Requirements:
+ The following Configuration Manager Object(s) are required by
+ this Generator:
+ - EArmObjCmn600Info
+*/
+
+/** This macro expands to a function that retrieves the CMN-600
+ Information from the Configuration Manager.
+*/
+GET_OBJECT_LIST (
+ EObjNameSpaceArm,
+ EArmObjCmn600Info,
+ CM_ARM_CMN_600_INFO
+ );
+
+/** Check the CMN-600 Information.
+
+ @param [in] Cmn600InfoList Array of CMN-600 information structure.
+ @param [in] Cmn600Count Count of CMN-600 information structure.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_INVALID_PARAMETER Invalid parameter.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+ValidateCmn600Info (
+ IN CONST CM_ARM_CMN_600_INFO * Cmn600InfoList,
+ IN CONST UINT32 Cmn600Count
+ )
+{
+ UINT32 Index;
+ UINT32 DtcIndex;
+ CONST CM_ARM_CMN_600_INFO * Cmn600Info;
+ CONST CM_ARM_GENERIC_INTERRUPT * DtcInterrupt;
+
+ if ((Cmn600InfoList == NULL) ||
+ (Cmn600Count == 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Validate each Cmn600Info structure.
+ for (Index = 0; Index < Cmn600Count; Index++) {
+ Cmn600Info = &Cmn600InfoList[Index];
+
+ // At least one DTC is required.
+ if ((Cmn600Info->DtcCount == 0) ||
+ (Cmn600Info->DtcCount > MAX_DTC_COUNT)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: Invalid DTC configuration:\n"
+ ));
+ goto error_handler;
+ }
+
+ // Check PERIPHBASE and ROOTNODEBASE address spaces are initialized.
+ if ((Cmn600Info->PeriphBaseAddress == 0) ||
+ (Cmn600Info->RootNodeBaseAddress == 0)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: Invalid PERIPHBASE or ROOTNODEBASE.\n"
+ ));
+ goto error_handler;
+ }
+
+ // The PERIPHBASE address must be 64MB aligned for a (X < 4) && (Y < 4)
+ // dimension mesh, and 256MB aligned otherwise.
+ // Check it is a least 64MB aligned.
+ if ((Cmn600Info->PeriphBaseAddress &
+ (PERIPHBASE_MIN_ADDRESS_LENGTH - 1)) != 0) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: PERIPHBASE address must be 64MB aligned.\n"
+ ));
+ goto error_handler;
+ }
+
+ // The PERIPHBASE address is at most 64MB for a (X < 4) && (Y < 4)
+ // dimension mesh, and 256MB otherwise. Check it is not more than 256MB.
+ if (Cmn600Info->PeriphBaseAddressLength > PERIPHBASE_MAX_ADDRESS_LENGTH) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: PERIPHBASE address range must be < 256MB.\n"
+ ));
+ goto error_handler;
+ }
+
+ // Check the 16 KB alignment of the ROOTNODEBASE address.
+ if ((Cmn600Info->PeriphBaseAddress &
+ (ROOTNODEBASE_ADDRESS_LENGTH - 1)) != 0) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: Root base address must be 16KB aligned.\n"
+ ));
+ goto error_handler;
+ }
+
+ // The ROOTNODEBASE address space should be included in the PERIPHBASE
+ // address space.
+ if ((Cmn600Info->PeriphBaseAddress > Cmn600Info->RootNodeBaseAddress) ||
+ ((Cmn600Info->PeriphBaseAddress + Cmn600Info->PeriphBaseAddressLength) <
+ (Cmn600Info->RootNodeBaseAddress + ROOTNODEBASE_ADDRESS_LENGTH))) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600:"
+ " ROOTNODEBASE address space not in PERIPHBASE address space.\n"
+ ));
+ goto error_handler;
+ }
+
+ for (DtcIndex = 0; DtcIndex < Cmn600Info->DtcCount; DtcIndex++) {
+ DtcInterrupt = &Cmn600Info->DtcInterrupt[DtcIndex];
+ if (!IS_EXTENDED_INTERRUPT_CONSUMER (DtcInterrupt->Flags)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: DTC Interrupt must be consumer.\n"
+ ));
+ goto error_handler;
+ }
+ } // for DTC Interrupt
+
+ } //for Cmn600InfoList
+
+ return EFI_SUCCESS;
+
+error_handler:
+
+ DEBUG ((
+ DEBUG_ERROR,
+ "PeriphBaseAddress = 0x%llx\n"
+ "PeriphBaseAddressLength = 0x%llx\n"
+ "RootNodeBaseAddress = 0x%llx\n"
+ "DtcCount = %u\n",
+ Cmn600Info->PeriphBaseAddress,
+ Cmn600Info->PeriphBaseAddressLength,
+ Cmn600Info->RootNodeBaseAddress,
+ Cmn600Info->DtcCount
+ ));
+
+ for (DtcIndex = 0; DtcIndex < Cmn600Info->DtcCount; DtcIndex++) {
+ DtcInterrupt = &Cmn600Info->DtcInterrupt[DtcIndex];
+ DEBUG ((
+ DEBUG_ERROR,
+ " DTC[%d]:\n",
+ DtcIndex
+ ));
+ DEBUG ((
+ DEBUG_ERROR,
+ " Interrupt = 0x%lx\n",
+ DtcInterrupt->Interrupt
+ ));
+ DEBUG ((
+ DEBUG_ERROR,
+ " Flags = 0x%lx\n",
+ DtcInterrupt->Flags
+ ));
+ } // for
+
+ return EFI_INVALID_PARAMETER;
+}
+
+/** Build a SSDT table describing the CMN-600 device.
+
+ The table created by this function must be freed by FreeSsdtCmn600Table.
+
+ @param [in] Cmn600Info Pointer to a Cmn600 structure.
+ @param [in] Name The Name to give to the Device.
+ Must be a NULL-terminated ASL NameString
+ e.g.: "DEV0", "DV15.DEV0", etc.
+ @param [in] Uid UID for the CMN600 device.
+ @param [out] Table If success, pointer to the created SSDT table.
+
+ @retval EFI_SUCCESS Table generated successfully.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND Could not find information.
+ @retval EFI_OUT_OF_RESOURCES Could not allocate memory.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+FixupCmn600Info (
+ IN CONST CM_ARM_CMN_600_INFO * Cmn600Info,
+ IN CONST CHAR8 * Name,
+ IN CONST UINT64 Uid,
+ OUT EFI_ACPI_DESCRIPTION_HEADER ** Table
+ )
+{
+ EFI_STATUS Status;
+ EFI_STATUS Status1;
+ UINT8 Index;
+ CONST CM_ARM_GENERIC_INTERRUPT * DtcInt;
+
+ EFI_ACPI_DESCRIPTION_HEADER * SsdtCmn600Template;
+ AML_ROOT_NODE_HANDLE RootNodeHandle;
+ AML_OBJECT_NODE_HANDLE NameOpIdNode;
+ AML_OBJECT_NODE_HANDLE NameOpCrsNode;
+ AML_DATA_NODE_HANDLE CmnPeriphBaseRdNode;
+ AML_DATA_NODE_HANDLE CmnRootNodeBaseRdNode;
+ AML_OBJECT_NODE_HANDLE DeviceNode;
+
+ // Parse the Ssdt CMN-600 Template.
+ SsdtCmn600Template = (EFI_ACPI_DESCRIPTION_HEADER*)
+ ssdtcmn600template_aml_code;
+
+ RootNodeHandle = NULL;
+ Status = AmlParseDefinitionBlock (
+ SsdtCmn600Template,
+ &RootNodeHandle
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: Failed to parse SSDT CMN-600 Template."
+ " Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ // Get the _UID NameOp object defined by the "Name ()" statement,
+ // and update its value.
+ Status = AmlFindNode (
+ RootNodeHandle,
+ "\\_SB_.CMN0._UID",
+ &NameOpIdNode
+ );
+ if (EFI_ERROR (Status)) {
+ goto error_handler;
+ }
+
+ Status = AmlNameOpUpdateInteger (NameOpIdNode, (UINT64)Uid);
+ if (EFI_ERROR (Status)) {
+ goto error_handler;
+ }
+
+ // Get the _CRS object defined by the "Name ()" statement.
+ Status = AmlFindNode (
+ RootNodeHandle,
+ "\\_SB.CMN0._CRS",
+ &NameOpCrsNode
+ );
+ if (EFI_ERROR (Status)) {
+ goto error_handler;
+ }
+
+ // Get the first Rd node in the "_CRS" object.
+ // This is the PERIPHBASE node.
+ Status = AmlNameOpCrsGetFirstRdNode (NameOpCrsNode, &CmnPeriphBaseRdNode);
+ if (EFI_ERROR (Status)) {
+ goto error_handler;
+ }
+
+ if (CmnPeriphBaseRdNode == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ goto error_handler;
+ }
+
+ // Update the PERIPHBASE base address and length.
+ Status = AmlUpdateRdQWord (
+ CmnPeriphBaseRdNode,
+ Cmn600Info->PeriphBaseAddress,
+ Cmn600Info->PeriphBaseAddressLength
+ );
+ if (EFI_ERROR (Status)) {
+ goto error_handler;
+ }
+
+ // Get the QWord node corresponding to the ROOTNODEBASE.
+ // It is the second Resource Data element in the BufferNode's
+ // variable list of arguments.
+ Status = AmlNameOpCrsGetNextRdNode (
+ CmnPeriphBaseRdNode,
+ &CmnRootNodeBaseRdNode
+ );
+ if (EFI_ERROR (Status)) {
+ goto error_handler;
+ }
+
+ if (CmnRootNodeBaseRdNode == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ goto error_handler;
+ }
+
+ // Update the ROOTNODEBASE base address and length.
+ Status = AmlUpdateRdQWord (
+ CmnRootNodeBaseRdNode,
+ Cmn600Info->RootNodeBaseAddress,
+ ROOTNODEBASE_ADDRESS_LENGTH
+ );
+ if (EFI_ERROR (Status)) {
+ goto error_handler;
+ }
+
+ // Add the Interrupt node(s).
+ // Generate Resource Data node(s) corresponding to the "Interrupt ()"
+ // ASL function and add it at the last position in the list of
+ // Resource Data nodes.
+ for (Index = 0; Index < Cmn600Info->DtcCount; Index++) {
+ DtcInt = &Cmn600Info->DtcInterrupt[Index];
+ Status = AmlCodeGenCrsAddRdInterrupt (
+ NameOpCrsNode,
+ IS_EXTENDED_INTERRUPT_CONSUMER (DtcInt->Flags),
+ IS_EXTENDED_INTERRUPT_EDGE_TRIGGERED (DtcInt->Flags),
+ IS_EXTENDED_INTERRUPT_ACTIVE_LOW (DtcInt->Flags),
+ IS_EXTENDED_INTERRUPT_SHARED (DtcInt->Flags),
+ (UINT32*)&DtcInt->Interrupt,
+ 1
+ );
+ if (EFI_ERROR (Status)) {
+ goto error_handler;
+ }
+ } // for
+
+ // Fixup the CMN600 device name.
+ // This MUST be done at the end, otherwise AML paths won't be valid anymore.
+ // Get the CMN0 variable defined by the "Device ()" statement.
+ Status = AmlFindNode (RootNodeHandle, "\\_SB_.CMN0", &DeviceNode);
+ if (EFI_ERROR (Status)) {
+ goto error_handler;
+ }
+
+ // Update the CMN600 Device's name.
+ Status = AmlDeviceOpUpdateName (DeviceNode, (CHAR8*)Name);
+ if (EFI_ERROR (Status)) {
+ goto error_handler;
+ }
+
+ // Serialise the definition block
+ Status = AmlSerializeDefinitionBlock (
+ RootNodeHandle,
+ Table
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: Failed to Serialize SSDT Table Data."
+ " Status = %r\n",
+ Status
+ ));
+ }
+
+error_handler:
+ // Cleanup
+ if (RootNodeHandle != NULL) {
+ Status1 = AmlDeleteTree (RootNodeHandle);
+ if (EFI_ERROR (Status1)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: Failed to cleanup AML tree."
+ " Status = %r\n",
+ Status1
+ ));
+ // If Status was success but we failed to delete the AML Tree
+ // return Status1 else return the original error code, i.e. Status.
+ if (!EFI_ERROR (Status)) {
+ return Status1;
+ }
+ }
+ }
+
+ return Status;
+}
+
+/** Free any resources allocated for constructing the SSDT tables for CMN-600.
+
+ @param [in] This Pointer to the ACPI table generator.
+ @param [in] AcpiTableInfo Pointer to the ACPI Table Info.
+ @param [in] CfgMgrProtocol Pointer to the Configuration Manager
+ Protocol Interface.
+ @param [in, out] Table Pointer to an array of pointers
+ to ACPI Table(s).
+ @param [in] TableCount Number of ACPI table(s).
+
+ @retval EFI_SUCCESS The resources were freed successfully.
+ @retval EFI_INVALID_PARAMETER The table pointer is NULL or invalid.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+FreeSsdtCmn600TableResourcesEx (
+ IN CONST ACPI_TABLE_GENERATOR * CONST This,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
+ IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN OUT EFI_ACPI_DESCRIPTION_HEADER *** CONST Table,
+ IN CONST UINTN TableCount
+ )
+{
+ EFI_ACPI_DESCRIPTION_HEADER ** TableList;
+ UINTN Index;
+
+ ASSERT (This != NULL);
+ ASSERT (AcpiTableInfo != NULL);
+ ASSERT (CfgMgrProtocol != NULL);
+ ASSERT (AcpiTableInfo->TableGeneratorId == This->GeneratorID);
+ ASSERT (AcpiTableInfo->AcpiTableSignature == This->AcpiTableSignature);
+
+ if ((Table == NULL) ||
+ (*Table == NULL) ||
+ (TableCount == 0)) {
+ DEBUG ((DEBUG_ERROR, "ERROR: SSDT-CMN-600: Invalid Table Pointer\n"));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ TableList = *Table;
+
+ for (Index = 0; Index < TableCount; Index++) {
+ if ((TableList[Index] != NULL) &&
+ (TableList[Index]->Signature ==
+ EFI_ACPI_6_3_SECONDARY_SYSTEM_DESCRIPTION_TABLE_SIGNATURE)) {
+ FreePool (TableList[Index]);
+ } else {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: Could not free SSDT table at index %d."
+ " Status = %r\n",
+ Index,
+ EFI_INVALID_PARAMETER
+ ));
+ return EFI_INVALID_PARAMETER;
+ }
+ } //for
+
+ // Free the table list.
+ FreePool (*Table);
+ *Table = NULL;
+ return EFI_SUCCESS;
+}
+
+/** Construct SSDT tables for describing CMN-600 meshes.
+
+ This function invokes the Configuration Manager protocol interface
+ to get the required hardware information for generating the ACPI
+ table.
+
+ If this function allocates any resources then they must be freed
+ in the FreeXXXXTableResourcesEx function.
+
+ @param [in] This Pointer to the ACPI table generator.
+ @param [in] AcpiTableInfo Pointer to the ACPI table information.
+ @param [in] CfgMgrProtocol Pointer to the Configuration Manager
+ Protocol interface.
+ @param [out] Table Pointer to a list of generated ACPI table(s).
+ @param [out] TableCount Number of generated ACPI table(s).
+
+ @retval EFI_SUCCESS Table generated successfully.
+ @retval EFI_BAD_BUFFER_SIZE The size returned by the Configuration
+ Manager is less than the Object size for
+ the requested object.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND Could not find information.
+ @retval EFI_OUT_OF_RESOURCES Could not allocate memory.
+ @retval EFI_UNSUPPORTED Unsupported configuration.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+BuildSsdtCmn600TableEx (
+ IN CONST ACPI_TABLE_GENERATOR * This,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
+ IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ OUT EFI_ACPI_DESCRIPTION_HEADER *** Table,
+ OUT UINTN * CONST TableCount
+ )
+{
+ EFI_STATUS Status;
+ UINT64 Index;
+ CM_ARM_CMN_600_INFO * Cmn600Info;
+ UINT32 Cmn600Count;
+ CHAR8 NewName[5];
+ EFI_ACPI_DESCRIPTION_HEADER ** TableList;
+
+ ASSERT (This != NULL);
+ ASSERT (AcpiTableInfo != NULL);
+ ASSERT (CfgMgrProtocol != NULL);
+ ASSERT (Table != NULL);
+ ASSERT (TableCount != NULL);
+ ASSERT (AcpiTableInfo->TableGeneratorId == This->GeneratorID);
+ ASSERT (AcpiTableInfo->AcpiTableSignature == This->AcpiTableSignature);
+
+ *Table = NULL;
+
+ // Get CMN-600 information.
+ Status = GetEArmObjCmn600Info (
+ CfgMgrProtocol,
+ CM_NULL_TOKEN,
+ &Cmn600Info,
+ &Cmn600Count
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: Failed to get the CMN-600 information."
+ " Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ if ((Cmn600Count == 0) || (Cmn600Count > MAX_CMN600_DEVICES_SUPPORTED)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: CMN600 peripheral count = %d."
+ " This must be between 1 to 16.\n",
+ Cmn600Count
+ ));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Validate the CMN-600 Info.
+ Status = ValidateCmn600Info (Cmn600Info, Cmn600Count);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: Invalid CMN600 information. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ // Allocate a table to store pointers to the SSDT tables.
+ TableList = (EFI_ACPI_DESCRIPTION_HEADER**)
+ AllocateZeroPool (
+ (sizeof (EFI_ACPI_DESCRIPTION_HEADER*) * Cmn600Count)
+ );
+ if (TableList == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: Failed to allocate memory for Table List."
+ " Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ // Setup the table list early so that that appropriate cleanup
+ // can be done in case of failure.
+ *Table = TableList;
+
+ NewName[0] = 'C';
+ NewName[1] = 'M';
+ NewName[2] = 'N';
+ NewName[4] = '\0';
+ for (Index = 0; Index < Cmn600Count; Index++) {
+ NewName[3] = AsciiFromHex ((UINT8)(Index));
+
+ // Build a SSDT table describing the CMN600 device.
+ Status = FixupCmn600Info (
+ &Cmn600Info[Index],
+ NewName,
+ Index,
+ &TableList[Index]
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: SSDT-CMN-600: Failed to build associated SSDT table."
+ " Status = %r\n",
+ Status
+ ));
+ break;
+ }
+
+ // Increment the table count here so that appropriate clean-up
+ // can be done in case of failure.
+ *TableCount += 1;
+ } // for
+
+ // Note: Table list and CMN600 device count has been setup. The
+ // framework will invoke FreeSsdtCmn600TableResourcesEx() even
+ // on failure, so appropriate clean-up will be done.
+ return Status;
+}
+
+/** This macro defines the Raw Generator revision.
+*/
+#define SSDT_CMN_600_GENERATOR_REVISION CREATE_REVISION (1, 0)
+
+/** The interface for the Raw Table Generator.
+*/
+STATIC
+CONST
+ACPI_TABLE_GENERATOR SsdtCmn600Generator = {
+ // Generator ID
+ CREATE_STD_ACPI_TABLE_GEN_ID (EStdAcpiTableIdSsdtCmn600),
+ // Generator Description
+ L"ACPI.STD.SSDT.CMN600.GENERATOR",
+ // ACPI Table Signature
+ EFI_ACPI_6_3_SECONDARY_SYSTEM_DESCRIPTION_TABLE_SIGNATURE,
+ // ACPI Table Revision - Unused
+ 0,
+ // Minimum ACPI Table Revision - Unused
+ 0,
+ // Creator ID
+ TABLE_GENERATOR_CREATOR_ID_ARM,
+ // Creator Revision
+ SSDT_CMN_600_GENERATOR_REVISION,
+ // Build table function. Use the extended version instead.
+ NULL,
+ // Free table function. Use the extended version instead.
+ NULL,
+ // Build Table function
+ BuildSsdtCmn600TableEx,
+ // Free Resource function
+ FreeSsdtCmn600TableResourcesEx
+};
+
+/** Register the Generator with the ACPI Table Factory.
+
+ @param [in] ImageHandle The handle to the image.
+ @param [in] SystemTable Pointer to the System Table.
+
+ @retval EFI_SUCCESS The Generator is registered.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_ALREADY_STARTED The Generator for the Table ID
+ is already registered.
+**/
+EFI_STATUS
+EFIAPI
+AcpiSsdtCmn600LibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE * SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ Status = RegisterAcpiTableGenerator (&SsdtCmn600Generator);
+ DEBUG ((
+ DEBUG_INFO,
+ "SSDT-CMN-600: Register Generator. Status = %r\n",
+ Status
+ ));
+ ASSERT_EFI_ERROR (Status);
+ return Status;
+}
+
+/** Deregister the Generator from the ACPI Table Factory.
+
+ @param [in] ImageHandle The handle to the image.
+ @param [in] SystemTable Pointer to the System Table.
+
+ @retval EFI_SUCCESS The Generator is deregistered.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND The Generator is not registered.
+**/
+EFI_STATUS
+EFIAPI
+AcpiSsdtCmn600LibDestructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE * SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ Status = DeregisterAcpiTableGenerator (&SsdtCmn600Generator);
+ DEBUG ((
+ DEBUG_INFO,
+ "SSDT-CMN-600: Deregister Generator. Status = %r\n",
+ Status
+ ));
+ ASSERT_EFI_ERROR (Status);
+ return Status;
+}
diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600Generator.h b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600Generator.h
new file mode 100644
index 0000000000000000000000000000000000000000..ab03b72236e78c28a5e36452bb5d7e93e957332d
--- /dev/null
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600Generator.h
@@ -0,0 +1,51 @@
+/** @file
+
+ Copyright (c) 2020, Arm Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Glossary:
+ - Cm or CM - Configuration Manager
+ - Obj or OBJ - Object
+ - Std or STD - Standard
+
+ @par Reference(s):
+ - Arm CoreLink CMN-600 Coherent Mesh Network Technical Reference Manual r3p0
+ - Generic ACPI for Arm Components 1.0 Platform Design Document
+**/
+
+#ifndef SSDT_CMN600_GENERATOR_H_
+#define SSDT_CMN600_GENERATOR_H_
+
+/** PeriphBase maximum address length is 256MB (0x10000000)
+ for a (X >= 4) || (Y >= 4) dimensions mesh.
+*/
+#define PERIPHBASE_MAX_ADDRESS_LENGTH SIZE_256MB
+
+/** PeriphBase minimum address length is 64MB (0x04000000)
+ for a (X < 4) && (Y < 4) dimensions mesh.
+*/
+#define PERIPHBASE_MIN_ADDRESS_LENGTH SIZE_64MB
+
+/** RootNodeBase address length is 16KB (0x00004000).
+*/
+#define ROOTNODEBASE_ADDRESS_LENGTH SIZE_16KB
+
+/** Maximum number of CMN-600 Debug and Trace Logic Controllers (DTC).
+*/
+#define MAX_DTC_COUNT 4
+
+/** Starting value for the UID to represent the CMN600 devices.
+*/
+#define CMN600_DEVICE_START_UID 0
+
+/** Maximum CMN-600 devices supported by this generator.
+ This generator supports a maximum of 16 CMN-600 devices.
+ Note: This is not a hard limitation and can be extended if needed.
+ Corresponding changes would be needed to support the Name and
+ UID fields describing the serial port.
+
+*/
+#define MAX_CMN600_DEVICES_SUPPORTED 16
+
+#endif // SSDT_CMN600_GENERATOR_H_
diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600LibArm.inf b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600LibArm.inf
new file mode 100644
index 0000000000000000000000000000000000000000..821c0d531b983e19278062a11317bba83fdc141a
--- /dev/null
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600LibArm.inf
@@ -0,0 +1,34 @@
+## @file
+# Ssdt CMN-600 Table Generator
+#
+# Copyright (c) 2020, Arm Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = SsdtCmn600LibArm
+ FILE_GUID = CEDB450D-8F0E-4ACC-8FB7-F72EC7D216A4
+ VERSION_STRING = 1.0
+ MODULE_TYPE = DXE_DRIVER
+ LIBRARY_CLASS = NULL|DXE_DRIVER
+ CONSTRUCTOR = AcpiSsdtCmn600LibConstructor
+ DESTRUCTOR = AcpiSsdtCmn600LibDestructor
+
+[Sources]
+ SsdtCmn600Generator.c
+ SsdtCmn600Generator.h
+ SsdtCmn600Template.asl
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ ArmPlatformPkg/ArmPlatformPkg.dec
+ DynamicTablesPkg/DynamicTablesPkg.dec
+
+[LibraryClasses]
+ AmlLib
+ BaseLib
+
diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600Template.asl b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600Template.asl
new file mode 100644
index 0000000000000000000000000000000000000000..023a89e2ab3d753cb1cdb8c423766294b0ea3fab
--- /dev/null
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtCmn600LibArm/SsdtCmn600Template.asl
@@ -0,0 +1,81 @@
+/** @file
+ SSDT CMN-600 Template
+
+ Copyright (c) 2020, Arm Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Reference(s):
+ - Arm CoreLink CMN-600 Coherent Mesh Network Technical Reference Manual r3p0
+ - Generic ACPI for Arm Components 1.0 Platform Design Document
+
+ @par Glossary:
+ - {template} - Data fixed up using AML Fixup APIs.
+ - {codegen} - Data generated using AML Codegen APIs.
+**/
+
+DefinitionBlock ("SsdtCmn600.aml", "SSDT", 2, "ARMLTD", "CMN-600", 1) {
+ Scope (_SB) {
+ // CMN-600 device object for a X * Y mesh, where (X >= 4) || (Y >= 4).
+ Device (CMN0) { // {template}
+ Name (_HID, "ARMHC600")
+ Name (_UID, 0x0) // {template}
+
+ Name (_CRS, ResourceTemplate () {
+ // Descriptor for 256 MB of the CFG region at offset PERIPHBASE.
+ QWordMemory (
+ ResourceConsumer, // bit 0 of general flags is 0.
+ PosDecode,
+ MinFixed, // Range is fixed.
+ MaxFixed, // Range is Fixed.
+ NonCacheable,
+ ReadWrite,
+ 0x00000000, // Granularity
+ 0xA0000000, // MinAddress // {template}
+ 0xAFFFFFFF, // MaxAddress // {template}
+ 0x00000000, // Translation
+ 0x10000000, // RangeLength // {template}
+ , // ResourceSourceIndex
+ , // ResourceSource
+ CFGR // DescriptorName
+ ) // QWordMemory
+
+ // Descriptor for the root node. This is a 16 KB region at offset
+ // ROOTNODEBASE. In this example, ROOTNODEBASE starts at the 16 KB
+ // aligned offset of PERIPHBASE.
+ QWordMemory (
+ ResourceConsumer, // bit 0 of general flags is 0.
+ PosDecode,
+ MinFixed, // Range is fixed.
+ MaxFixed, // Range is Fixed.
+ NonCacheable,
+ ReadWrite,
+ 0x00000000, // Granularity
+ 0xA0000000, // MinAddress // {template}
+ 0xAFFFFFFF, // MaxAddress // {template}
+ 0x00000000, // Translation
+ 0x10000000, // RangeLength // {template}
+ , // ResourceSourceIndex
+ , // ResourceSource
+ ROOT // DescriptorName
+ ) // QWordMemory
+
+ // The Interrupt information is generated using AmlCodegen.
+ // Interrupt on PMU0 overflow, attached to DTC [0], with GSIV = <gsiv0>.
+ //
+ // Interrupt ( // {codegen}
+ // ResourceConsumer, // ResourceUsage
+ // Level, // EdgeLevel
+ // ActiveHigh, // ActiveLevel
+ // Exclusive, // Shared
+ // , // ResourceSourceIndex
+ // , // ResourceSource
+ // // DescriptorName
+ // ) {
+ // 0xA5 // <gsiv0 >
+ // } // Interrupt
+
+ }) // Name
+ } // Device
+ } // _SB
+} // DefinitionBlock
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 8+ messages in thread