From: "PierreGondois" <pierre.gondois@arm.com>
To: devel@edk2.groups.io, kuqin12@gmail.com
Cc: Sami Mujawar <Sami.Mujawar@arm.com>,
Alexei Fedorov <Alexei.Fedorov@arm.com>,
Joe Lopez <joelopez@microsoft.com>
Subject: Re: [edk2-devel] [PATCH v2 4/6] DynamicTablesPkg: DynamicTableManagerDxe: Added check for installed tables
Date: Thu, 28 Jul 2022 15:07:09 +0200 [thread overview]
Message-ID: <1102c58a-1424-4e5f-476b-3866137382a3@arm.com> (raw)
In-Reply-To: <20220728043147.395-5-kuqin12@gmail.com>
Hello Kun,
With the changes below:
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Thanks!
On 7/28/22 06:31, Kun Qin via groups.io wrote:
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3997
>
> This change added an extra step to allow check for installed ACPI tables.
>
> For FADT, MADT, GTDT, DSDT, DBG2 and SPCR tables, either pre-installed or
> supplied through AcpiTableInfo can be accepted.
>
> An extra check for FADT ACPI table existence during installation step is
> also added.
>
> Cc: Sami Mujawar <Sami.Mujawar@arm.com>
> Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
>
> Co-authored-by: Joe Lopez <joelopez@microsoft.com>
> Signed-off-by: Kun Qin <kuqin12@gmail.com>
> ---
>
> Notes:
> v2:
> - Function description updates [Sami]
> - Refactorized the table verification [Pierre]
>
> DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c | 182 +++++++++++---------
> DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf | 1 +
> 2 files changed, 103 insertions(+), 80 deletions(-)
>
> diff --git a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c
> index ed62299f9bbd..4ad7c0c8dbfa 100644
> --- a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c
> +++ b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.c
> @@ -10,6 +10,7 @@
> #include <Library/DebugLib.h>
> #include <Library/PcdLib.h>
> #include <Library/UefiBootServicesTableLib.h>
> +#include <Protocol/AcpiSystemDescriptionTable.h>
> #include <Protocol/AcpiTable.h>
>
> // Module specific include files.
> @@ -22,6 +23,29 @@
> #include <Protocol/DynamicTableFactoryProtocol.h>
> #include <SmbiosTableGenerator.h>
>
> +#define ACPI_TABLE_PRESENT_INFO_LIST BIT0
> +#define ACPI_TABLE_PRESENT_INSTALLED BIT1
> +
> +#define ACPI_TABLE_VERIFY_FADT 0
> +#define ACPI_TABLE_VERIFY_COUNT 6
> +
> +typedef struct {
> + ESTD_ACPI_TABLE_ID EstdTableId;
> + UINT32 AcpiTableSignature;
> + CHAR8 AcpiTableName[sizeof (UINT32) + 1];
> + BOOLEAN IsMandatory;
> + UINT16 Presence;
> +} ACPI_TABLE_PRESENCE_INFO;
I think it needs some documentation (also for mAcpiVerifyTables).
> +
> +ACPI_TABLE_PRESENCE_INFO mAcpiVerifyTables[ACPI_TABLE_VERIFY_COUNT] = {
> + { EStdAcpiTableIdFadt, EFI_ACPI_6_2_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE, "FADT", TRUE, 0 },
> + { EStdAcpiTableIdMadt, EFI_ACPI_6_2_MULTIPLE_APIC_DESCRIPTION_TABLE_SIGNATURE, "MADT", TRUE, 0 },
> + { EStdAcpiTableIdGtdt, EFI_ACPI_6_2_GENERIC_TIMER_DESCRIPTION_TABLE_SIGNATURE, "GTDT", TRUE, 0 },
> + { EStdAcpiTableIdDsdt, EFI_ACPI_6_2_DIFFERENTIATED_SYSTEM_DESCRIPTION_TABLE_SIGNATURE, "DSDT", TRUE, 0 },
> + { EStdAcpiTableIdDbg2, EFI_ACPI_6_2_DEBUG_PORT_2_TABLE_SIGNATURE, "DBG2", FALSE, 0 },
> + { EStdAcpiTableIdSpcr, EFI_ACPI_6_2_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE, "SPCR", FALSE, 0 },
> +};
> +
> /** This macro expands to a function that retrieves the ACPI Table
> List from the Configuration Manager.
> */
> @@ -395,6 +419,7 @@ BuildAndInstallAcpiTable (
>
> @retval EFI_SUCCESS Success.
> @retval EFI_NOT_FOUND If mandatory table is not found.
> + @retval EFI_ALREADY_STARTED If mandatory table found in AcpiTableInfo is already installed.
> **/
> STATIC
> EFI_STATUS
> @@ -404,75 +429,68 @@ VerifyMandatoryTablesArePresent (
> IN UINT32 AcpiTableCount
> )
> {
> - EFI_STATUS Status;
> - BOOLEAN FadtFound;
> - BOOLEAN MadtFound;
> - BOOLEAN GtdtFound;
> - BOOLEAN DsdtFound;
> - BOOLEAN Dbg2Found;
> - BOOLEAN SpcrFound;
> + EFI_STATUS Status;
> + UINTN Handle;
> + UINTN Index;
> + UINTN InstalledTableIndex;
> + EFI_ACPI_DESCRIPTION_HEADER *DescHeader;
> + EFI_ACPI_TABLE_VERSION Version;
> + EFI_ACPI_SDT_PROTOCOL *AcpiSdt;
>
> - Status = EFI_SUCCESS;
> - FadtFound = FALSE;
> - MadtFound = FALSE;
> - GtdtFound = FALSE;
> - DsdtFound = FALSE;
> - Dbg2Found = FALSE;
> - SpcrFound = FALSE;
> ASSERT (AcpiTableInfo != NULL);
>
> + Status = EFI_SUCCESS;
> +
> + // Check against the statically initialized ACPI tables to see if they are in ACPI info list
> while (AcpiTableCount-- != 0) {
> - switch (AcpiTableInfo[AcpiTableCount].AcpiTableSignature) {
> - case EFI_ACPI_6_2_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE:
> - FadtFound = TRUE;
> - break;
> - case EFI_ACPI_6_2_MULTIPLE_APIC_DESCRIPTION_TABLE_SIGNATURE:
> - MadtFound = TRUE;
> - break;
> - case EFI_ACPI_6_2_GENERIC_TIMER_DESCRIPTION_TABLE_SIGNATURE:
> - GtdtFound = TRUE;
> - break;
> - case EFI_ACPI_6_2_DIFFERENTIATED_SYSTEM_DESCRIPTION_TABLE_SIGNATURE:
> - DsdtFound = TRUE;
> - break;
> - case EFI_ACPI_6_2_DEBUG_PORT_2_TABLE_SIGNATURE:
> - Dbg2Found = TRUE;
> - break;
> - case EFI_ACPI_6_2_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE:
> - SpcrFound = TRUE;
> - break;
> - default:
> - break;
> + for (Index = 0; Index < ACPI_TABLE_VERIFY_COUNT; Index++) {
> + if (AcpiTableInfo[AcpiTableCount].AcpiTableSignature == mAcpiVerifyTables[Index].AcpiTableSignature) {
> + mAcpiVerifyTables[Index].Presence |= ACPI_TABLE_PRESENT_INFO_LIST;
Would it be possible to add a 'break' here ?
Just a note for Sami:
These double loops seem expensive, but I cannot find anything better and/or shorter.
> + }
> }
> }
>
> - // We need at least the FADT, MADT, GTDT and the DSDT tables to boot
> - if (!FadtFound) {
> - DEBUG ((DEBUG_ERROR, "ERROR: FADT Table not found\n"));
> - Status = EFI_NOT_FOUND;
> - }
> + // They also might be published already, so we can search from there
> + AcpiSdt = NULL;
> + Status = gBS->LocateProtocol (&gEfiAcpiSdtProtocolGuid, NULL, (VOID **)&AcpiSdt);
>
> - if (!MadtFound) {
> - DEBUG ((DEBUG_ERROR, "ERROR: MADT Table not found.\n"));
> - Status = EFI_NOT_FOUND;
> + if (EFI_ERROR (Status) || (AcpiSdt == NULL)) {
> + DEBUG ((DEBUG_WARN, "WARNING: Failed to locate ACPI SDT protocol (0x%p) - %r\n", AcpiSdt, Status));
> + goto EvaluatePresence;
I think this is ok to just print and return an error, unless you think about this could happen.
> }
>
> - if (!GtdtFound) {
> - DEBUG ((DEBUG_ERROR, "ERROR: GTDT Table not found.\n"));
> - Status = EFI_NOT_FOUND;
> - }
> + for (Index = 0; Index < ACPI_TABLE_VERIFY_COUNT; Index++) {
> + Handle = 0;
> + InstalledTableIndex = 0;
> + do {
> + Status = AcpiSdt->GetAcpiTable (InstalledTableIndex, (EFI_ACPI_SDT_HEADER **)&DescHeader, &Version, &Handle);
> + if (EFI_ERROR (Status)) {
> + break;
> + }
>
> - if (!DsdtFound) {
> - DEBUG ((DEBUG_ERROR, "ERROR: DSDT Table not found.\n"));
> - Status = EFI_NOT_FOUND;
> - }
> + InstalledTableIndex++;
> + } while (DescHeader->Signature != mAcpiVerifyTables[Index].AcpiTableSignature);
>
> - if (!Dbg2Found) {
> - DEBUG ((DEBUG_WARN, "WARNING: DBG2 Table not found.\n"));
> + if (!EFI_ERROR (Status)) {
> + mAcpiVerifyTables[Index].Presence |= ACPI_TABLE_PRESENT_INSTALLED;
> + }
> }
>
> - if (!SpcrFound) {
> - DEBUG ((DEBUG_WARN, "WARNING: SPCR Table not found.\n"));
> +EvaluatePresence:
> + for (Index = 0; Index < ACPI_TABLE_VERIFY_COUNT; Index++) {
> + if (mAcpiVerifyTables[Index].Presence == 0) {
> + if (mAcpiVerifyTables[Index].IsMandatory) {
> + DEBUG ((DEBUG_ERROR, "ERROR: %a Table not found.\n", mAcpiVerifyTables[Index].AcpiTableName));
> + Status = EFI_NOT_FOUND;
> + } else {
> + DEBUG ((DEBUG_WARN, "WARNING: %a Table not found.\n", mAcpiVerifyTables[Index].AcpiTableName));
> + }
> + } else if (mAcpiVerifyTables[Index].Presence ==
> + (ACPI_TABLE_PRESENT_INFO_LIST | ACPI_TABLE_PRESENT_INSTALLED))
> + {
> + DEBUG ((DEBUG_ERROR, "ERROR: %a Table found while already published.\n", mAcpiVerifyTables[Index].AcpiTableName));
> + Status = EFI_ALREADY_STARTED;
> + }
> }
Just a note for Sami:
In the loop above we return the last invalid code, this should be ok.
>
> return Status;
> @@ -489,8 +507,9 @@ VerifyMandatoryTablesArePresent (
> @param [in] CfgMgrProtocol Pointer to the Configuration Manager
> Protocol Interface.
>
> - @retval EFI_SUCCESS Success.
> - @retval EFI_NOT_FOUND If a mandatory table or a generator is not found.
> + @retval EFI_SUCCESS Success.
> + @retval EFI_NOT_FOUND If a mandatory table or a generator is not found.
> + @retval EFI_ALREADY_STARTED If mandatory table found in AcpiTableInfo is already installed.
> **/
> STATIC
> EFI_STATUS
> @@ -562,7 +581,7 @@ ProcessAcpiTables (
> if (EFI_ERROR (Status)) {
> DEBUG ((
> DEBUG_ERROR,
> - "ERROR: Failed to find mandatory ACPI Table(s)."
> + "ERROR: Failed to verify mandatory ACPI Table(s) presence."
> " Status = %r\n",
> Status
> ));
> @@ -570,29 +589,32 @@ ProcessAcpiTables (
> }
>
> // Add the FADT Table first.
> - for (Idx = 0; Idx < AcpiTableCount; Idx++) {
> - if (CREATE_STD_ACPI_TABLE_GEN_ID (EStdAcpiTableIdFadt) ==
> - AcpiTableInfo[Idx].TableGeneratorId)
> - {
> - Status = BuildAndInstallAcpiTable (
> - TableFactoryProtocol,
> - CfgMgrProtocol,
> - AcpiTableProtocol,
> - &AcpiTableInfo[Idx]
> - );
> - if (EFI_ERROR (Status)) {
> - DEBUG ((
> - DEBUG_ERROR,
> - "ERROR: Failed to find build and install ACPI FADT Table." \
> - " Status = %r\n",
> - Status
> - ));
> - return Status;
> - }
> + if ((mAcpiVerifyTables[ACPI_TABLE_VERIFY_FADT].Presence & ACPI_TABLE_PRESENT_INSTALLED) == 0) {
> + // FADT is not yet installed
> + for (Idx = 0; Idx < AcpiTableCount; Idx++) {
> + if (CREATE_STD_ACPI_TABLE_GEN_ID (EStdAcpiTableIdFadt) ==
> + AcpiTableInfo[Idx].TableGeneratorId)
> + {
> + Status = BuildAndInstallAcpiTable (
> + TableFactoryProtocol,
> + CfgMgrProtocol,
> + AcpiTableProtocol,
> + &AcpiTableInfo[Idx]
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "ERROR: Failed to find build and install ACPI FADT Table." \
> + " Status = %r\n",
> + Status
> + ));
> + return Status;
> + }
>
> - break;
> - }
> - } // for
> + break;
> + }
> + } // for
> + }
>
> // Add remaining ACPI Tables
> for (Idx = 0; Idx < AcpiTableCount; Idx++) {
> diff --git a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf
> index 028c3d413cf8..5ca98c8b4895 100644
> --- a/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf
> +++ b/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe.inf
> @@ -36,6 +36,7 @@ [LibraryClasses]
>
> [Protocols]
> gEfiAcpiTableProtocolGuid # PROTOCOL ALWAYS_CONSUMED
> + gEfiAcpiSdtProtocolGuid # PROTOCOL ALWAYS_CONSUMED
>
> gEdkiiConfigurationManagerProtocolGuid # PROTOCOL ALWAYS_CONSUMED
> gEdkiiDynamicTableFactoryProtocolGuid # PROTOCOL ALWAYS_CONSUMED
next prev parent reply other threads:[~2022-07-28 13:07 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-28 4:31 [PATCH v2 0/6] Enhance DynamicTablesPkg modules Kun Qin
2022-07-28 4:31 ` [PATCH v2 1/6] DynamicTablesPkg: DynamicPlatRepoLib: Added MemoryAllocationLib to inf Kun Qin
2022-07-28 4:31 ` [PATCH v2 2/6] DynamicTablesPkg: DynamicPlatRepoLib: Fix incorrect dereferencing Kun Qin
2022-07-28 4:31 ` [PATCH v2 3/6] DynamicTablesPkg: DynamicPlatRepoLib: Adding more token fixers Kun Qin
2022-07-28 4:31 ` [PATCH v2 4/6] DynamicTablesPkg: DynamicTableManagerDxe: Added check for installed tables Kun Qin
2022-07-28 13:07 ` PierreGondois [this message]
2022-07-29 5:00 ` [edk2-devel] " Kun Qin
2022-07-29 15:11 ` PierreGondois
2022-07-28 4:31 ` [PATCH v2 5/6] DynamicTablesPkg: AcpiSsdtPcieLibArm: Added function to reserve ECAM space Kun Qin
2022-07-28 13:07 ` [edk2-devel] " PierreGondois
2022-07-29 5:01 ` Kun Qin
2022-07-28 4:31 ` [PATCH v2 6/6] DynamicTablesPkg: AcpiSsdtPcieLibArm: Added case handling for PCI config Kun Qin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1102c58a-1424-4e5f-476b-3866137382a3@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox