Ops… Looks like your PE/COFF is linked at 0x0000000140000000, so 0x140001b60 is the interesting bit. (lldb) dis -s 0x0000000140001B60 -b hello_world_std.efi[0x140001b60]: 48 8b 09 movq (%rcx), %rcx hello_world_std.efi[0x140001b63]: 48 01 c1 addq %rax, %rcx hello_world_std.efi[0x140001b66]: 4c 89 c2 movq %r8, %rdx hello_world_std.efi[0x140001b69]: 48 11 c2 adcq %rax, %rdx hello_world_std.efi[0x140001b6c]: 48 31 c1 xorq %rax, %rcx hello_world_std.efi[0x140001b6f]: 48 31 c2 xorq %rax, %rdx hello_world_std.efi[0x140001b72]: 48 be 00 00 00 00 00 00 00 80 movabsq $-0x8000000000000000, %rsi ; imm = 0x8000000000000000 hello_world_std.efi[0x140001b7c]: 4c 21 c6 andq %r8, %rsi RCX - FFFFFFFFFFFFFFFF So yea that looks like the fault. I don’t see that pattern in your .s file…. Can you figure out what function is @ 0x140001b60 in the PE/COFF image. Do you have a map file from the linker? Thanks, Andrew Fish PS Again sorry I don’t have anything installed to crack PDB files. Thanks, Andrew Fish > On Jul 25, 2022, at 10:51 AM, Andrew Fish via groups.io wrote: > > Ayush, > > CR2 is the fault address so 0xFFFFFFFFFFFFFFFF. Given for EFI Virt == Physical the fault address looks like a bad pointer. > > Sorry I’ve not used VC++ in a long time so I don’t know how to debug with VC++, but If I was using clang/lldb I’d look at the source and assembly for the fault address. > > The image base is: 0x000000000603C000 > The fault PC/RIP is: 000000000603DB60 > > So the faulting code is at 0x1B60 in the image. Given the images are linked at zero you should be able to load the build product into the debugger and look at what code is at offset 0x1B60. The same should work for any tools that dump the binary. > > Thanks, > > Andrew Fish > >> On Jul 25, 2022, at 10:33 AM, Ayush Singh wrote: >> >> Hello everyone.While running Rust tests in UEFI environment, I have come across a numeric test that causes a pagefault. A simple reproducible example for this is given below: >> >> ```rust >> >> fn main() { >> use std::hint::black_box as b; >> >> let z: i128 = b(1); >> assert!((-z as f64) < 0.0); >> } >> >> ``` >> >> >> The exception output is as follows: >> >> ``` >> >> !!!! X64 Exception Type - 0E(#PF - Page-Fault) CPU Apic ID - 00000000 !!!! >> ExceptionData - 0000000000000000 I:0 R:0 U:0 W:0 P:0 PK:0 SS:0 SGX:0 >> RIP - 000000000603DB60, CS - 0000000000000038, RFLAGS - 0000000000000246 >> RAX - 0000000000000000, RCX - FFFFFFFFFFFFFFFF, RDX - FFFFFFFFFFFFFFFF >> RBX - 0000000000000000, RSP - 0000000007EDF1D0, RBP - 0000000007EDF4C0 >> RSI - 0000000007EDF360, RDI - 0000000007EDF3C0 >> R8 - 0000000000000000, R9 - 0000000000000038, R10 - 0000000000000000 >> R11 - 0000000000000000, R12 - 00000000060C6018, R13 - 0000000007EDF520 >> R14 - 0000000007EDF6A8, R15 - 0000000005FA9490 >> DS - 0000000000000030, ES - 0000000000000030, FS - 0000000000000030 >> GS - 0000000000000030, SS - 0000000000000030 >> CR0 - 0000000080010033, CR2 - FFFFFFFFFFFFFFFF, CR3 - 0000000007C01000 >> CR4 - 0000000000000668, CR8 - 0000000000000000 >> DR0 - 0000000000000000, DR1 - 0000000000000000, DR2 - 0000000000000000 >> DR3 - 0000000000000000, DR6 - 00000000FFFF0FF0, DR7 - 0000000000000400 >> GDTR - 00000000079DE000 0000000000000047, LDTR - 0000000000000000 >> IDTR - 0000000007418018 0000000000000FFF, TR - 0000000000000000 >> FXSAVE_STATE - 0000000007EDEE30 >> !!!! Find image based on IP(0x603DB60) /var/home/ayush/Documents/Programming/Rust/uefi/hello_world_std/target/x86_64-unknown-uefi/debug/deps/hello_world_std-338028f9369e2d42.pdb (ImageBase=000000000603C000, EntryPoint=000000000603D8C0) !!!! >> >> ``` >> >> >> From my testing, the exception only occurs when a few conditions are met. >> >> 1. The binary is compiled in Debug mode. No error in Release mode. >> >> 2. `i128` is in a black_box [1]. Does not occur if `black_box` is not present. >> >> 3. It has to be `i128`. `i64` or something else work fine. >> >> 4. The cast has to be done on `-z`. Doing the same with `+z` is fine. >> >> >> I have also been discussing this in the Rust zulipchat [2], so feel free to chime in there. >> >> >> Additionally, here are links for more information about this program: >> >> 1. Assembly: https://rust-lang.zulipchat.com/user_uploads/4715/od51Y9Dkfjahcg9HHcOud8Fm/hello_world_std-338028f9369e2d42.s >> >> 2. EFI Binary: https://rust-lang.zulipchat.com/user_uploads/4715/CknqtXLR8SaJZmyOnXctQkpL/hello_world_std.efi >> >> 3. PDB file: https://rust-lang.zulipchat.com/user_uploads/4715/zV4i6DsjgQXotp_gS1naEsU0/hello_world_std-338028f9369e2d42.pdb >> >> >> Yours Sincerely, >> >> Ayush Singh >> >> >> [1]: https://doc.rust-lang.org/std/hint/fn.black_box.html >> >> [2]: https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/Casting.20i128.20to.20f64.20in.20black_box.20causes.20exception.20in.20UEFI >> >> >> > >