From: Jeff Fan <jeff.fan@intel.com>
To: edk2-devel@ml01.01.org
Cc: Michael Kinney <michael.d.kinney@intel.com>,
Feng Tian <feng.tian@intel.com>,
Giri P Mudusuru <giri.p.mudusuru@intel.com>,
Laszlo Ersek <lersek@redhat.com>
Subject: [Patch v4 02/46] UefiCpuPkg/MpInitLib: Add microcode definitions defined in IA32 SDM
Date: Sat, 30 Jul 2016 02:14:28 +0800 [thread overview]
Message-ID: <1469816112-8200-3-git-send-email-jeff.fan@intel.com> (raw)
In-Reply-To: <1469816112-8200-1-git-send-email-jeff.fan@intel.com>
Add microcode definitions defined in Intel(R) 64 and IA-32 Architectures
Software Developer's Manual Volume 3A, Section 9.11.
v4:
1. ProcessorSignature type changed to CPU_MICROCODE_PROCESSOR_SIGNATURE
2. Add pack(1) for structure CPU_MICROCODE_HEADER and
CPU_MICROCODE_EXTENDED_TABLE.
v3:
1. Update SDM date to June, 2016
2. Mention BCD format in CPU_MICROCODE_DATE
3. Rename ProcessorChecksum to Checksum to match SDM.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
---
UefiCpuPkg/Include/Register/Microcode.h | 200 ++++++++++++++++++++++++++++++++
1 file changed, 200 insertions(+)
create mode 100644 UefiCpuPkg/Include/Register/Microcode.h
diff --git a/UefiCpuPkg/Include/Register/Microcode.h b/UefiCpuPkg/Include/Register/Microcode.h
new file mode 100644
index 0000000..94529a1
--- /dev/null
+++ b/UefiCpuPkg/Include/Register/Microcode.h
@@ -0,0 +1,200 @@
+/** @file
+ Microcode Definitions.
+
+ Microcode Definitions based on contents of the
+ Intel(R) 64 and IA-32 Architectures Software Developer's Manual
+ Volume 3A, Section 9.11 Microcode Definitions
+
+ Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ @par Specification Reference:
+ Intel(R) 64 and IA-32 Architectures Software Developer's Manual, Volume 3A,
+ June 2016, Chapter 9 Processor Management and Initialization, Section 9-11.
+
+**/
+
+#ifndef __MICROCODE_H__
+#define __MICROCODE_H__
+
+///
+/// CPU Microcode Date in BCD format
+///
+typedef union {
+ struct {
+ UINT32 Year:16;
+ UINT32 Day:8;
+ UINT32 Month:8;
+ } Bits;
+ UINT32 Uint32;
+} CPU_MICROCODE_DATE;
+
+///
+/// CPU Microcode Processor Signature format
+///
+typedef union {
+ struct {
+ UINT32 Stepping:4;
+ UINT32 Model:4;
+ UINT32 Family:4;
+ UINT32 Type:2;
+ UINT32 Reserved1:2;
+ UINT32 ExtendedModel:4;
+ UINT32 ExtendedFamily:8;
+ UINT32 Reserved2:4;
+ } Bits;
+ UINT32 Uint32;
+} CPU_MICROCODE_PROCESSOR_SIGNATURE;
+
+#pragma pack (1)
+
+///
+/// Microcode Update Format definition
+///
+typedef struct {
+ ///
+ /// Version number of the update header
+ ///
+ UINT32 HeaderVersion;
+ ///
+ /// Unique version number for the update, the basis for the update
+ /// signature provided by the processor to indicate the current update
+ /// functioning within the processor. Used by the BIOS to authenticate
+ /// the update and verify that the processor loads successfully. The
+ /// value in this field cannot be used for processor stepping identification
+ /// alone. This is a signed 32-bit number.
+ ///
+ UINT32 UpdateRevision;
+ ///
+ /// Date of the update creation in binary format: mmddyyyy (e.g.
+ /// 07/18/98 is 07181998H).
+ ///
+ CPU_MICROCODE_DATE Date;
+ ///
+ /// Extended family, extended model, type, family, model, and stepping
+ /// of processor that requires this particular update revision (e.g.,
+ /// 00000650H). Each microcode update is designed specifically for a
+ /// given extended family, extended model, type, family, model, and
+ /// stepping of the processor.
+ /// The BIOS uses the processor signature field in conjunction with the
+ /// CPUID instruction to determine whether or not an update is
+ /// appropriate to load on a processor. The information encoded within
+ /// this field exactly corresponds to the bit representations returned by
+ /// the CPUID instruction.
+ ///
+ CPU_MICROCODE_PROCESSOR_SIGNATURE ProcessorSignature;
+ ///
+ /// Checksum of Update Data and Header. Used to verify the integrity of
+ /// the update header and data. Checksum is correct when the
+ /// summation of all the DWORDs (including the extended Processor
+ /// Signature Table) that comprise the microcode update result in
+ /// 00000000H.
+ ///
+ UINT32 Checksum;
+ ///
+ /// Version number of the loader program needed to correctly load this
+ /// update. The initial version is 00000001H
+ ///
+ UINT32 LoaderRevision;
+ ///
+ /// Platform type information is encoded in the lower 8 bits of this 4-
+ /// byte field. Each bit represents a particular platform type for a given
+ /// CPUID. The BIOS uses the processor flags field in conjunction with
+ /// the platform Id bits in MSR (17H) to determine whether or not an
+ /// update is appropriate to load on a processor. Multiple bits may be set
+ /// representing support for multiple platform IDs.
+ ///
+ UINT32 ProcessorFlags;
+ ///
+ /// Specifies the size of the encrypted data in bytes, and must be a
+ /// multiple of DWORDs. If this value is 00000000H, then the microcode
+ /// update encrypted data is 2000 bytes (or 500 DWORDs).
+ ///
+ UINT32 DataSize;
+ ///
+ /// Specifies the total size of the microcode update in bytes. It is the
+ /// summation of the header size, the encrypted data size and the size of
+ /// the optional extended signature table. This value is always a multiple
+ /// of 1024.
+ ///
+ UINT32 TotalSize;
+ ///
+ /// Reserved fields for future expansion.
+ ///
+ UINT8 Reserved[12];
+} CPU_MICROCODE_HEADER;
+
+///
+/// Extended Signature Table Header Field Definitions
+///
+typedef struct {
+ ///
+ /// Specifies the number of extended signature structures (Processor
+ /// Signature[n], processor flags[n] and checksum[n]) that exist in this
+ /// microcode update
+ ///
+ UINT32 ExtendedSignatureCount;
+ ///
+ /// Checksum of update extended processor signature table. Used to
+ /// verify the integrity of the extended processor signature table.
+ /// Checksum is correct when the summation of the DWORDs that
+ /// comprise the extended processor signature table results in
+ /// 00000000H.
+ ///
+ UINT32 ExtendedChecksum;
+ ///
+ /// Reserved fields.
+ ///
+ UINT8 Reserved[12];
+} CPU_MICROCODE_EXTENDED_TABLE_HEADER;
+
+///
+/// Extended Signature Table Field Definitions
+///
+typedef struct {
+ ///
+ /// Extended family, extended model, type, family, model, and stepping
+ /// of processor that requires this particular update revision (e.g.,
+ /// 00000650H). Each microcode update is designed specifically for a
+ /// given extended family, extended model, type, family, model, and
+ /// stepping of the processor.
+ /// The BIOS uses the processor signature field in conjunction with the
+ /// CPUID instruction to determine whether or not an update is
+ /// appropriate to load on a processor. The information encoded within
+ /// this field exactly corresponds to the bit representations returned by
+ /// the CPUID instruction.
+ ///
+ CPU_MICROCODE_PROCESSOR_SIGNATURE ProcessorSignature;
+ ///
+ /// Platform type information is encoded in the lower 8 bits of this 4-
+ /// byte field. Each bit represents a particular platform type for a given
+ /// CPUID. The BIOS uses the processor flags field in conjunction with
+ /// the platform Id bits in MSR (17H) to determine whether or not an
+ /// update is appropriate to load on a processor. Multiple bits may be set
+ /// representing support for multiple platform IDs.
+ ///
+ UINT32 ProcessorFlag;
+ ///
+ /// Used by utility software to decompose a microcode update into
+ /// multiple microcode updates where each of the new updates is
+ /// constructed without the optional Extended Processor Signature
+ /// Table.
+ /// To calculate the Checksum, substitute the Primary Processor
+ /// Signature entry and the Processor Flags entry with the
+ /// corresponding Extended Patch entry. Delete the Extended Processor
+ /// Signature Table entries. The Checksum is correct when the
+ /// summation of all DWORDs that comprise the created Extended
+ /// Processor Patch results in 00000000H.
+ ///
+ UINT32 Checksum;
+} CPU_MICROCODE_EXTENDED_TABLE;
+
+#pragma pack ()
+
+#endif
--
2.7.4.windows.1
next prev parent reply other threads:[~2016-07-29 18:15 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-29 18:14 [Patch v4 00/46] MP Initialize Library Jeff Fan
2016-07-29 18:14 ` [Patch v4 01/46] UefiCpuPkg/LocalApic.h: Remove duplicated/conflicted definitions Jeff Fan
2016-07-29 18:14 ` Jeff Fan [this message]
2016-07-29 18:14 ` [Patch v4 03/46] UefiCpuPkg/CpuS3DataDxe: Move StartupVector allocation to EndOfDxe() Jeff Fan
2016-07-29 18:14 ` [Patch v4 04/46] UefiCpuPkg/MpInitLib: Add MP Initialize library class definition Jeff Fan
2016-07-29 18:14 ` [Patch v4 05/46] UefiCpuPkg/MpInitLib: Add two instances PeiMpInitLib and DxeMpInitLib Jeff Fan
2016-07-29 18:14 ` [Patch v4 06/46] UefiCpuPkg/MpInitLib: Add AP assembly code and MP_CPU_EXCHANGE_INFO Jeff Fan
2016-07-29 18:14 ` [Patch v4 07/46] UefiCpuPkg/MpInitLib: Fix typo and clean up the code Jeff Fan
2016-07-29 18:14 ` [Patch v4 08/46] UefiCpuPkg/MpInitLib: Add EnableExecuteDisable in MP_CPU_EXCHANGE_INFO Jeff Fan
2016-07-29 18:14 ` [Patch v4 09/46] UefiCpuPkg/MpInitLib: Add AsmRelocateApLoop() assembly code Jeff Fan
2016-07-29 18:14 ` [Patch v4 10/46] UefiCpuPkg/MpInitLib: Add MP_ASSEMBLY_ADDRESS_MAP Jeff Fan
2016-07-29 18:14 ` [Patch v4 11/46] UefiCpuPkg/MpInitLib: Get ApLoopMode and MointorFilter size Jeff Fan
2016-07-29 18:14 ` [Patch v4 12/46] UefiCpuPkg/MpInitLib: Allocate and initialize memory of MP Data buffer Jeff Fan
2016-07-29 18:14 ` [Patch v4 13/46] UefiCpuPkg/MpInitLib: Initialize CPU_AP_DATA for CPU APs Jeff Fan
2016-07-29 18:14 ` [Patch v4 14/46] UefiCpuPkg/MpInitLib: Add CPU_VOLATILE_REGISTERS & worker functions Jeff Fan
2016-07-29 18:14 ` [Patch v4 15/46] UefiCpuPkg/MpInitLib: Add MicrocodeDetect() and load microcode on BSP Jeff Fan
2016-07-29 18:14 ` [Patch v4 16/46] UefiCpuPkg/MpInitLib: Save CPU MP Data pointer Jeff Fan
2016-07-29 18:14 ` [Patch v4 17/46] UefiCpuPkg/MpInitLib: Register one End of PEI callback function Jeff Fan
2016-07-29 18:14 ` [Patch v4 18/46] UefiCpuPkg/MpInitLib: Register one period event to check APs status Jeff Fan
2016-07-29 18:14 ` [Patch v4 19/46] UefiCpuPkg/MpInitLib: Allocate AP reset vector buffer under 1MB Jeff Fan
2016-07-29 18:14 ` [Patch v4 20/46] UefiCpuPkg/MpInitLib: Add ApCFunction() executed by assembly code Jeff Fan
2016-07-29 18:14 ` [Patch v4 21/46] UefiCpuPkg/MpInitLib: Fill MP_CPU_EXCHANGE_INFO fields Jeff Fan
2016-07-29 18:14 ` [Patch v4 22/46] UefiCpuPkg/MpInitLib: Add WakeUpAP() Jeff Fan
2016-07-29 18:14 ` [Patch v4 23/46] UefiCpuPkg/MpInitLib: Send INIT-SIPI-SIPI to get processor count Jeff Fan
2016-07-29 18:14 ` [Patch v4 24/46] UefiCpuPkg/MpInitLib: Enable x2APIC mode on BSP/APs Jeff Fan
2016-07-29 18:14 ` [Patch v4 25/46] UefiCpuPkg/MpInitLib: Sort processor by ascending order of APIC ID Jeff Fan
2016-07-29 18:14 ` [Patch v4 26/46] UefiCpuPkg/MpInitLib: Skip collect processor count if GUIDed HOB exist Jeff Fan
2016-07-29 18:14 ` [Patch v4 27/46] UefiCpuPkg/MpInitLib: Implementation of MpInitLibGetNumberOfProcessors() Jeff Fan
2016-07-29 18:14 ` [Patch v4 28/46] UefiCpuPkg/MpInitLib: Implementation of MpInitLibGetProcessorInfo() Jeff Fan
2016-07-29 18:14 ` [Patch v4 29/46] UefiCpuPkg/MpInitLib: Implementation of MpInitLibWhoAmI() Jeff Fan
2016-07-29 18:14 ` [Patch v4 30/46] UefiCpuPkg/MpInitLib: Implementation of MpInitLibSwitchBSP() Jeff Fan
2016-07-29 18:14 ` [Patch v4 31/46] UefiCpuPkg/MpInitLib: Implementation of MpInitLibEnableDisableAP() Jeff Fan
2016-07-29 18:14 ` [Patch v4 32/46] UefiCpuPkg/MpInitLib: Check APs Status and update APs status Jeff Fan
2016-07-29 18:14 ` [Patch v4 33/46] UefiCpuPkg/MpInitLib: Implementation of MpInitLibStartupThisAP() Jeff Fan
2016-07-29 18:15 ` [Patch v4 34/46] UefiCpuPkg/MpInitLib: Implementation of MpInitLibStartupAllAPs() Jeff Fan
2016-07-29 18:15 ` [Patch v4 35/46] UefiCpuPkg/MpInitLib: Place APs in safe loop before hand-off to OS Jeff Fan
2016-07-29 18:15 ` [Patch v4 36/46] OvmfPkg: Add MpInitLib reference in DSC files Jeff Fan
2016-07-29 18:15 ` [Patch v4 37/46] QuarkPlatformPkg: " Jeff Fan
2016-07-29 18:15 ` [Patch v4 38/46] UefiCpuPkg/CpuMpPei: Consume MpInitLib to produce CPU MP PPI services Jeff Fan
2016-07-29 18:15 ` [Patch v4 39/46] UefiCpuPkg/CpuMpPei: Remove unused files and codes Jeff Fan
2016-07-29 18:15 ` [Patch v4 40/46] UefiCpuPkg/CpuMpPei: Delete PeiMpServices.c and PeiMpServices.h Jeff Fan
2016-07-29 18:15 ` [Patch v4 41/46] UefiCpuPkg/CpuDxe: Consume MpInitLib to produce CPU MP Protocol services Jeff Fan
2016-07-29 18:15 ` [Patch v4 42/46] UefiCpuPkg/CpuDxe: Move SetMtrrsFromBuffer() location Jeff Fan
2016-07-29 18:15 ` [Patch v4 43/46] UefiCpuPkg/CpuDxe: Remove unused codes and files Jeff Fan
2016-07-29 18:15 ` [Patch v4 44/46] MdePkg/MpService.h: Fixed typo in function header to match PI spec Jeff Fan
2016-07-29 18:15 ` [Patch v4 45/46] MdePkg/MpService.h: Trim whitespace at end of line Jeff Fan
2016-07-29 18:15 ` [Patch v4 46/46] UefiCpuPkg/CpuDxe: Fixed typo in function header to match PI spec Jeff Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469816112-8200-3-git-send-email-jeff.fan@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox