From: Jeff Fan <jeff.fan@intel.com>
To: edk2-devel@lists.01.org
Cc: Michael Kinney <michael.d.kinney@intel.com>,
Feng Tian <feng.tian@intel.com>,
Giri P Mudusuru <giri.p.mudusuru@intel.com>,
Laszlo Ersek <lersek@redhat.com>
Subject: [Patch v5 04/48] UefiCpuPkg/MpInitLib: Add MP Initialize library class definition
Date: Tue, 2 Aug 2016 16:59:04 +0800 [thread overview]
Message-ID: <1470128388-17960-5-git-send-email-jeff.fan@intel.com> (raw)
In-Reply-To: <1470128388-17960-1-git-send-email-jeff.fan@intel.com>
MP Initialize library provides basic functionalities to do APs initialization,
to manage MP information and to wakeup APs to execute AP task.
It could be consumed by CPU MP PEI or DXE drivers to provide CPU MP PPI/Protocol
services.
v4:
1. MpInitLibGetProcessorInfo():
Update HealthData type from UINT32 to EFI_HEALTH_FLAGS.
Add #include <Ppi/SecPlatformInformation.h>
2. MpInitLibSwitchBSP():
Return EFI_DEVICE_ERROR instead of EFI_SUCCESS if the calling processor is
an AP.
3. MpInitLibStartupThisAP():
Fix several incorrect references to "APs" to match PI spec.
4. MpInitLibSwitchBSP() and MpInitLibEnableDisableAP():
Fix incorrect description on ProcessorNumber.
5. Trim whitespace at end of line.
v3:
1. Add whitespace after MpInitLibInitialize
2. Rename MpInitLibSwitchBsp to MpInitLibSwitchBSP to match PI spec
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
---
UefiCpuPkg/Include/Library/MpInitLib.h | 353 +++++++++++++++++++++++++++++++++
UefiCpuPkg/UefiCpuPkg.dec | 4 +
2 files changed, 357 insertions(+)
create mode 100644 UefiCpuPkg/Include/Library/MpInitLib.h
diff --git a/UefiCpuPkg/Include/Library/MpInitLib.h b/UefiCpuPkg/Include/Library/MpInitLib.h
new file mode 100644
index 0000000..3e19382
--- /dev/null
+++ b/UefiCpuPkg/Include/Library/MpInitLib.h
@@ -0,0 +1,353 @@
+/** @file
+ Multiple-Processor initialization Library.
+
+ Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __MP_INIT_LIB_H__
+#define __MP_INIT_LIB_H__
+
+#include <Ppi/SecPlatformInformation.h>
+#include <Protocol/MpService.h>
+
+/**
+ MP Initialize Library initialization.
+
+ This service will allocate AP reset vector and wakeup all APs to do APs
+ initialization.
+
+ This service must be invoked before all other MP Initialize Library
+ service are invoked.
+
+ @retval EFI_SUCCESS MP initialization succeeds.
+ @retval Others MP initialization fails.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibInitialize (
+ VOID
+ );
+
+/**
+ Retrieves the number of logical processor in the platform and the number of
+ those logical processors that are enabled on this boot. This service may only
+ be called from the BSP.
+
+ @param[out] NumberOfProcessors Pointer to the total number of logical
+ processors in the system, including the BSP
+ and disabled APs.
+ @param[out] NumberOfEnabledProcessors Pointer to the number of enabled logical
+ processors that exist in system, including
+ the BSP.
+
+ @retval EFI_SUCCESS The number of logical processors and enabled
+ logical processors was retrieved.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL and NumberOfEnabledProcessors
+ is NULL.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibGetNumberOfProcessors (
+ OUT UINTN *NumberOfProcessors, OPTIONAL
+ OUT UINTN *NumberOfEnabledProcessors OPTIONAL
+ );
+
+/**
+ Gets detailed MP-related information on the requested processor at the
+ instant this call is made. This service may only be called from the BSP.
+
+ @param[in] ProcessorNumber The handle number of processor.
+ @param[out] ProcessorInfoBuffer A pointer to the buffer where information for
+ the requested processor is deposited.
+ @param[out] HealthData Return processor health data.
+
+ @retval EFI_SUCCESS Processor information was returned.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist in the platform.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibGetProcessorInfo (
+ IN UINTN ProcessorNumber,
+ OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer,
+ OUT EFI_HEALTH_FLAGS *HealthData OPTIONAL
+ );
+
+/**
+ This service executes a caller provided function on all enabled APs.
+
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] SingleThread If TRUE, then all the enabled APs execute
+ the function specified by Procedure one by
+ one, in ascending order of processor handle
+ number. If FALSE, then all the enabled APs
+ execute the function specified by Procedure
+ simultaneously.
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until all APs finish
+ or TimeoutInMicroSeconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on all the enabled
+ APs, and go on executing immediately. If
+ all return from Procedure, or TimeoutInMicroSeconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicrosecsond Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ all APs return from Procedure, then Procedure
+ on the failed APs is terminated. All enabled
+ APs are available for next function assigned
+ by MpInitLibStartupAllAPs() or
+ MPInitLibStartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise,
+ if all APs finish successfully, then its
+ content is set to NULL. If not all APs
+ finish before timeout expires, then its
+ content is set to address of the buffer
+ holding handle numbers of the failed APs.
+ The buffer is allocated by MP Initialization
+ library, and it's the caller's responsibility to
+ free the buffer with FreePool() service.
+ In blocking mode, it is ready for consumption
+ when the call returns. In non-blocking mode,
+ it is ready when WaitEvent is signaled. The
+ list of failed CPU is terminated by
+ END_OF_CPU_LIST.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched
+ to all enabled APs.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_UNSUPPORTED WaitEvent is not NULL if non-blocking mode is not
+ supported.
+ @retval EFI_DEVICE_ERROR Caller processor is AP.
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.
+ @retval EFI_NOT_READY Any enabled APs are busy.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ all enabled APs have finished.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibStartupAllAPs (
+ IN EFI_AP_PROCEDURE Procedure,
+ IN BOOLEAN SingleThread,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT UINTN **FailedCpuList OPTIONAL
+ );
+
+/**
+ This service lets the caller get one enabled AP to execute a caller-provided
+ function.
+
+ @param[in] Procedure A pointer to the function to be run on the
+ designated AP of the system. See type
+ EFI_AP_PROCEDURE.
+ @param[in] ProcessorNumber The handle number of the AP. The range is
+ from 0 to the total number of logical
+ processors minus 1. The total number of
+ logical processors can be retrieved by
+ MpInitLibGetNumberOfProcessors().
+ @param[in] WaitEvent The event created by the caller with CreateEvent()
+ service. If it is NULL, then execute in
+ blocking mode. BSP waits until this AP finish
+ or TimeoutInMicroSeconds expires. If it's
+ not NULL, then execute in non-blocking mode.
+ BSP requests the function specified by
+ Procedure to be started on this AP,
+ and go on executing immediately. If this AP
+ return from Procedure or TimeoutInMicroSeconds
+ expires, this event is signaled. The BSP
+ can use the CheckEvent() or WaitForEvent()
+ services to check the state of event. Type
+ EFI_EVENT is defined in CreateEvent() in
+ the Unified Extensible Firmware Interface
+ Specification.
+ @param[in] TimeoutInMicrosecsond Indicates the time limit in microseconds for
+ this AP to finish this Procedure, either for
+ blocking or non-blocking mode. Zero means
+ infinity. If the timeout expires before
+ this AP returns from Procedure, then Procedure
+ on the AP is terminated. The
+ AP is available for next function assigned
+ by MpInitLibStartupAllAPs() or
+ MpInitLibStartupThisAP().
+ If the timeout expires in blocking mode,
+ BSP returns EFI_TIMEOUT. If the timeout
+ expires in non-blocking mode, WaitEvent
+ is signaled with SignalEvent().
+ @param[in] ProcedureArgument The parameter passed into Procedure on the
+ specified AP.
+ @param[out] Finished If NULL, this parameter is ignored. In
+ blocking mode, this parameter is ignored.
+ In non-blocking mode, if AP returns from
+ Procedure before the timeout expires, its
+ content is set to TRUE. Otherwise, the
+ value is set to FALSE. The caller can
+ determine if the AP returned from Procedure
+ by evaluating this value.
+
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before
+ the timeout expires.
+ @retval EFI_SUCCESS In non-blocking mode, the function has been
+ dispatched to specified AP.
+ @retval EFI_UNSUPPORTED A non-blocking mode request was made after the
+ UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+ signaled.
+ @retval EFI_UNSUPPORTED WaitEvent is not NULL if non-blocking mode is not
+ supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before
+ the specified AP has finished.
+ @retval EFI_NOT_READY The specified AP is busy.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibStartupThisAP (
+ IN EFI_AP_PROCEDURE Procedure,
+ IN UINTN ProcessorNumber,
+ IN EFI_EVENT WaitEvent OPTIONAL,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL,
+ OUT BOOLEAN *Finished OPTIONAL
+ );
+
+/**
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. This call can only be performed
+ by the current BSP.
+
+ @param[in] ProcessorNumber The handle number of AP that is to become the new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ MpInitLibGetNumberOfProcessors().
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an
+ enabled AP. Otherwise, it will be disabled.
+
+ @retval EFI_SUCCESS BSP successfully switched.
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to
+ this service returning.
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or
+ a disabled AP.
+ @retval EFI_NOT_READY The specified AP is busy.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibSwitchBSP (
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableOldBSP
+ );
+
+/**
+ This service lets the caller enable or disable an AP from this point onward.
+ This service may only be called from the BSP.
+
+ @param[in] ProcessorNumber The handle number of AP.
+ The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ MpInitLibGetNumberOfProcessors().
+ @param[in] EnableAP Specifies the new state for the processor for
+ enabled, FALSE for disabled.
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies
+ the new health status of the AP. This flag
+ corresponds to StatusFlag defined in
+ EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only
+ the PROCESSOR_HEALTH_STATUS_BIT is used. All other
+ bits are ignored. If it is NULL, this parameter
+ is ignored.
+
+ @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed
+ prior to this service returning.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber
+ does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibEnableDisableAP (
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableAP,
+ IN UINT32 *HealthFlag OPTIONAL
+ );
+
+/**
+ This return the handle number for the calling processor. This service may be
+ called from the BSP and APs.
+
+ @param[out] ProcessorNumber Pointer to the handle number of AP.
+ The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ MpInitLibGetNumberOfProcessors().
+
+ @retval EFI_SUCCESS The current processor handle number was returned
+ in ProcessorNumber.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL.
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.
+
+**/
+EFI_STATUS
+EFIAPI
+MpInitLibWhoAmI (
+ OUT UINTN *ProcessorNumber
+ );
+
+#endif
diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec
index ef46318..8674533 100644
--- a/UefiCpuPkg/UefiCpuPkg.dec
+++ b/UefiCpuPkg/UefiCpuPkg.dec
@@ -50,6 +50,10 @@ [LibraryClasses.IA32, LibraryClasses.X64]
##
SmmCpuFeaturesLib|Include/Library/SmmCpuFeaturesLib.h
+ ## @libraryclass Provides functions to support MP services on CpuMpPei and CpuDxe module.
+ ##
+ MpInitLib|Include/Library/MpInitLib.h
+
[Guids]
gUefiCpuPkgTokenSpaceGuid = { 0xac05bf33, 0x995a, 0x4ed4, { 0xaa, 0xb8, 0xef, 0x7a, 0xe8, 0xf, 0x5c, 0xb0 }}
--
2.7.4.windows.1
next prev parent reply other threads:[~2016-08-02 8:59 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-02 8:59 [Patch v5 00/48] MP Initialize Library Jeff Fan
2016-08-02 8:59 ` [Patch v5 01/48] UefiCpuPkg/LocalApic.h: Remove duplicated/conflicted definitions Jeff Fan
2016-08-02 17:17 ` Kinney, Michael D
2016-08-02 8:59 ` [Patch v5 02/48] UefiCpuPkg/MpInitLib: Add microcode definitions defined in IA32 SDM Jeff Fan
2016-08-02 15:20 ` Mudusuru, Giri P
2016-08-02 8:59 ` [Patch v5 03/48] UefiCpuPkg/CpuS3DataDxe: Move StartupVector allocation to EndOfDxe() Jeff Fan
2016-08-02 8:59 ` Jeff Fan [this message]
2016-08-02 8:59 ` [Patch v5 05/48] UefiCpuPkg/MpInitLib: Add two instances PeiMpInitLib and DxeMpInitLib Jeff Fan
2016-08-02 8:59 ` [Patch v5 06/48] UefiCpuPkg/MpInitLib: Add AP assembly code and MP_CPU_EXCHANGE_INFO Jeff Fan
2016-08-02 8:59 ` [Patch v5 07/48] UefiCpuPkg/MpInitLib: Fix typo and clean up the code Jeff Fan
2016-08-02 8:59 ` [Patch v5 08/48] UefiCpuPkg/MpInitLib: Add EnableExecuteDisable in MP_CPU_EXCHANGE_INFO Jeff Fan
2016-08-02 8:59 ` [Patch v5 09/48] UefiCpuPkg/MpInitLib: Add AsmRelocateApLoop() assembly code Jeff Fan
2016-08-02 8:59 ` [Patch v5 10/48] UefiCpuPkg/MpInitLib: Add MP_ASSEMBLY_ADDRESS_MAP Jeff Fan
2016-08-02 8:59 ` [Patch v5 11/48] UefiCpuPkg/MpInitLib: Get ApLoopMode and MointorFilter size Jeff Fan
2016-08-02 8:59 ` [Patch v5 12/48] UefiCpuPkg/MpInitLib: Allocate and initialize memory of MP Data buffer Jeff Fan
2016-08-02 8:59 ` [Patch v5 13/48] UefiCpuPkg/MpInitLib: Initialize CPU_AP_DATA for CPU APs Jeff Fan
2016-08-02 8:59 ` [Patch v5 14/48] UefiCpuPkg/MpInitLib: Add CPU_VOLATILE_REGISTERS & worker functions Jeff Fan
2016-08-02 8:59 ` [Patch v5 15/48] UefiCpuPkg/MpInitLib: Add MicrocodeDetect() and load microcode on BSP Jeff Fan
2016-08-02 8:59 ` [Patch v5 16/48] UefiCpuPkg/MpInitLib: Save CPU MP Data pointer Jeff Fan
2016-08-02 8:59 ` [Patch v5 17/48] UefiCpuPkg/MpInitLib: Register one End of PEI callback function Jeff Fan
2016-08-02 8:59 ` [Patch v5 18/48] UefiCpuPkg/MpInitLib: Register one period event to check APs status Jeff Fan
2016-08-02 8:59 ` [Patch v5 19/48] UefiCpuPkg/MpInitLib: Allocate AP reset vector buffer under 1MB Jeff Fan
2016-08-02 8:59 ` [Patch v5 20/48] UefiCpuPkg/MpInitLib: Add ApWakeupFunction() executed by assembly code Jeff Fan
2016-08-02 8:59 ` [Patch v5 21/48] UefiCpuPkg/MpInitLib: Fill MP_CPU_EXCHANGE_INFO fields Jeff Fan
2016-08-02 8:59 ` [Patch v5 22/48] UefiCpuPkg/MpInitLib: Add WakeUpAP() Jeff Fan
2016-08-02 8:59 ` [Patch v5 23/48] UefiCpuPkg/MpInitLib: Send INIT-SIPI-SIPI to get processor count Jeff Fan
2016-08-02 8:59 ` [Patch v5 24/48] UefiCpuPkg/MpInitLib: Enable x2APIC mode on BSP/APs Jeff Fan
2016-08-02 8:59 ` [Patch v5 25/48] UefiCpuPkg/MpInitLib: Sort processor by ascending order of APIC ID Jeff Fan
2016-08-02 8:59 ` [Patch v5 26/48] UefiCpuPkg/MpInitLib: Skip collect processor count if GUIDed HOB exist Jeff Fan
2016-08-02 8:59 ` [Patch v5 27/48] UefiCpuPkg/MpInitLib: Implementation of MpInitLibGetNumberOfProcessors() Jeff Fan
2016-08-02 8:59 ` [Patch v5 28/48] UefiCpuPkg/MpInitLib: Implementation of MpInitLibGetProcessorInfo() Jeff Fan
2016-08-02 8:59 ` [Patch v5 29/48] UefiCpuPkg/MpInitLib: Implementation of MpInitLibWhoAmI() Jeff Fan
2016-08-02 8:59 ` [Patch v5 30/48] UefiCpuPkg/MpInitLib: Implementation of MpInitLibSwitchBSP() Jeff Fan
2016-08-02 8:59 ` [Patch v5 31/48] UefiCpuPkg/MpInitLib: Implementation of MpInitLibEnableDisableAP() Jeff Fan
2016-08-02 8:59 ` [Patch v5 32/48] UefiCpuPkg/MpInitLib: Check APs Status and update APs status Jeff Fan
2016-08-02 8:59 ` [Patch v5 33/48] UefiCpuPkg/MpInitLib: Implementation of MpInitLibStartupThisAP() Jeff Fan
2016-08-02 8:59 ` [Patch v5 34/48] UefiCpuPkg/MpInitLib: Implementation of MpInitLibStartupAllAPs() Jeff Fan
2016-08-02 8:59 ` [Patch v5 35/48] UefiCpuPkg/MpInitLib: Place APs in safe loop before hand-off to OS Jeff Fan
2016-08-02 8:59 ` [Patch v5 36/48] OvmfPkg: Add MpInitLib reference in DSC files Jeff Fan
2016-08-02 11:39 ` Laszlo Ersek
2016-08-02 8:59 ` [Patch v5 37/48] QuarkPlatformPkg: " Jeff Fan
2016-08-02 8:59 ` [Patch v5 38/48] UefiCpuPkg/CpuMpPei: Consume MpInitLib to produce CPU MP PPI services Jeff Fan
2016-08-02 8:59 ` [Patch v5 39/48] UefiCpuPkg/CpuMpPei: Remove unused files and codes Jeff Fan
2016-08-02 8:59 ` [Patch v5 40/48] UefiCpuPkg/CpuMpPei: Delete PeiMpServices.c and PeiMpServices.h Jeff Fan
2016-08-02 8:59 ` [Patch v5 41/48] UefiCpuPkg/CpuDxe: Consume MpInitLib to produce CPU MP Protocol services Jeff Fan
2016-08-02 8:59 ` [Patch v5 42/48] UefiCpuPkg/CpuDxe: Move SetMtrrsFromBuffer() location Jeff Fan
2016-08-02 8:59 ` [Patch v5 43/48] UefiCpuPkg/CpuDxe: Remove unused codes and files Jeff Fan
2016-08-02 8:59 ` [Patch v5 44/48] UefiCpuPkg/CpuDxe: Remove PcdCpuMaxLogicalProcessorNumber consuming Jeff Fan
2016-08-02 8:59 ` [Patch v5 45/48] MdePkg/MpService.h: Fixed typo in function header to match PI spec Jeff Fan
2016-08-02 8:59 ` [Patch v5 46/48] MdePkg/MpService.h: Trim whitespace at end of line Jeff Fan
2016-08-02 8:59 ` [Patch v5 47/48] UefiCpuPkg/CpuDxe: Fixed typo in function header to match PI spec Jeff Fan
2016-08-02 8:59 ` [Patch v5 48/48] UefiCpuPkg/PiSmmCpuDxeSmm: Add gEfiVariableArchProtocolGuid dependency Jeff Fan
2016-08-19 1:19 ` Laszlo Ersek
2016-08-19 2:00 ` Fan, Jeff
2016-08-19 2:26 ` Laszlo Ersek
2016-08-19 2:45 ` Zeng, Star
2016-08-19 2:57 ` Zeng, Star
2016-08-19 13:19 ` Laszlo Ersek
2016-08-23 15:33 ` Laszlo Ersek
2016-08-24 2:39 ` Zeng, Star
2016-08-24 3:27 ` Laszlo Ersek
[not found] ` <ea6bfac6-1f9c-a0f6-c4ce-0b147136f34e@intel.com>
2016-08-24 8:16 ` Zeng, Star
2016-08-24 11:53 ` Laszlo Ersek
2016-08-24 13:42 ` Zeng, Star
2016-08-25 8:00 ` Fan, Jeff
2016-08-30 13:45 ` Laszlo Ersek
2016-09-01 1:11 ` Fan, Jeff
2016-09-01 17:46 ` Laszlo Ersek
2016-09-02 0:49 ` Fan, Jeff
2016-08-19 14:28 ` Laszlo Ersek
2016-08-02 18:55 ` [Patch v5 00/48] MP Initialize Library Kinney, Michael D
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470128388-17960-5-git-send-email-jeff.fan@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox