From: Sudeep Holla <sudeep.holla@arm.com>
To: edk2-devel@lists.01.org,
Linaro UEFI <linaro-uefi@lists.linaro.org>,
Evan Lloyd <Evan.Lloyd@arm.com>,
Leif Lindholm <leif.lindholm@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [PATCH] [RESEND] Platforms/ARM/Juno: Add support for ACPI 6.0 LPI(Low Power Idle) states
Date: Thu, 25 Aug 2016 18:09:23 +0100 [thread overview]
Message-ID: <1472144963-17785-1-git-send-email-sudeep.holla@arm.com> (raw)
ACPI 6.0 introduced LPI(Low Power Idle) states that provides an alternate
method to describe processor idle states.
LPI extensions leverages the processor container device(again introduced
in ACPI 6.0) allowing to express which parts of the system are affected
by a given LPI state. It defines the local power states for each node
in a hierarchical processor topology. The OSPM can use _LPI object to
select a local power state for each level of processor hierarchy in the
system.
This patch adds LPI support on Juno.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Evan Lloyd <Evan.Lloyd@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
Platforms/ARM/Juno/AcpiTables/Dsdt.asl | 232 ++++++++++++++++++++++++++++++---
1 file changed, 213 insertions(+), 19 deletions(-)
Hi Lief,
Assuming Evan has lost the patches during his holidays, I am resending it.
The support in the kernel is now added(latest mainline as of today) and
is enabled in defconfig. It's easy to test, just examine the sysfs entries:
/sys/devices/system/cpu/cpu*/cpuidle/state*/desc - Describes the cpuidle state
/sys/devices/system/cpu/cpu*/cpuidle/state*/{usage,time} - Should keep ticking
with time signifying that the idle states are entered and exited
correctly
Regards,
Sudeep
diff --git a/Platforms/ARM/Juno/AcpiTables/Dsdt.asl b/Platforms/ARM/Juno/AcpiTables/Dsdt.asl
index c324ded471f2..07e32bae21f8 100644
--- a/Platforms/ARM/Juno/AcpiTables/Dsdt.asl
+++ b/Platforms/ARM/Juno/AcpiTables/Dsdt.asl
@@ -19,29 +19,223 @@ DefinitionBlock("DsdtTable.aml", "DSDT", 1, "ARMLTD", "ARM-JUNO", EFI_ACPI_ARM_O
//
// A57x2-A53x4 Processor declaration
//
- Device(CPU0) { // A53-0: Cluster 1, Cpu 0
- Name(_HID, "ACPI0007")
- Name(_UID, 0)
+ Method (_OSC, 4, Serialized) { // _OSC: Operating System Capabilities
+ CreateDWordField (Arg3, 0x00, STS0)
+ CreateDWordField (Arg3, 0x04, CAP0)
+ If ((Arg0 == ToUUID ("0811b06e-4a27-44f9-8d60-3cbbc22e7b48") /* Platform-wide Capabilities */)) {
+ If (!(Arg1 == One)) {
+ STS0 &= ~0x1F
+ STS0 |= 0x0A
+ } Else {
+ If ((CAP0 & 0x100)) {
+ CAP0 &= ~0x100 /* No support for OS Initiated LPI */
+ STS0 &= ~0x1F
+ STS0 |= 0x12
+ }
+ }
+ } Else {
+ STS0 &= ~0x1F
+ STS0 |= 0x06
+ }
+ Return (Arg3)
}
- Device(CPU1) { // A53-1: Cluster 1, Cpu 1
- Name(_HID, "ACPI0007")
+ Device (CLU0) { // Cluster0 state
+ Name(_HID, "ACPI0010")
Name(_UID, 1)
+ Name (_LPI, Package() {
+ 0, // Version
+ 0, // Level Index
+ 1, // Count
+ Package() { // Power Gating state for Cluster
+ 2500, // Min residency (uS)
+ 1150, // Wake latency (uS)
+ 1, // Flags
+ 1, // Arch Context Flags
+ 100, //Residency Counter Frequency
+ 0, // No Parent State
+ 0x01000000, // Integer Entry method
+ ResourceTemplate() { // Null Residency Counter
+ Register (SystemMemory, 0, 0, 0, 0)
+ },
+ ResourceTemplate() { // Null Usage Counter
+ Register (SystemMemory, 0, 0, 0, 0)
+ },
+ "CluPwrDn"
+ },
+ })
+ Name(PLPI, Package() {
+ 0, // Version
+ 1, // Level Index
+ 2, // Count
+ Package() { // WFI for CPU
+ 1, // Min residency (uS)
+ 1, // Wake latency (uS)
+ 1, // Flags
+ 0, // Arch Context Flags
+ 100, //Residency Counter Frequency
+ 0, // No parent state
+ ResourceTemplate () {
+ // Register Entry method
+ Register (FFixedHW,
+ 0x20, // Bit Width
+ 0x00, // Bit Offset
+ 0xFFFFFFFF, // Address
+ 0x03, // Access Size
+ )
+ },
+ ResourceTemplate() { // Null Residency Counter
+ Register (SystemMemory, 0, 0, 0, 0)
+ },
+ ResourceTemplate() { // Null Usage Counter
+ Register (SystemMemory, 0, 0, 0, 0)
+ },
+ "WFI",
+ },
+ Package() { // Power Gating state for CPU
+ 150, // Min residency (uS)
+ 350, // Wake latency (uS)
+ 1, // Flags
+ 1, // Arch Context Flags
+ 100, //Residency Counter Frequency
+ 1, // Parent node can be in any state
+ ResourceTemplate () {
+ // Register Entry method
+ Register (FFixedHW,
+ 0x20, // Bit Width
+ 0x00, // Bit Offset
+ 0x00010000, // Address
+ 0x03, // Access Size
+ )
+ },
+ ResourceTemplate() { // Null Residency Counter
+ Register (SystemMemory, 0, 0, 0, 0)
+ },
+ ResourceTemplate() { // Null Usage Counter
+ Register (SystemMemory, 0, 0, 0, 0)
+ },
+ "CorePwrDn"
+ },
+ })
+ Device(CPU0) { // A57-0: Cluster 0, Cpu 0
+ Name(_HID, "ACPI0007")
+ Name(_UID, 4)
+ Method (_LPI, 0, NotSerialized) {
+ return(PLPI)
+ }
+ }
+ Device(CPU1) { // A57-1: Cluster 0, Cpu 1
+ Name(_HID, "ACPI0007")
+ Name(_UID, 5)
+ Method (_LPI, 0, NotSerialized) {
+ return(PLPI)
+ }
+ }
}
- Device(CPU2) { // A53-2: Cluster 1, Cpu 2
- Name(_HID, "ACPI0007")
+ Device (CLU1) { // Cluster1 state
+ Name(_HID, "ACPI0010")
Name(_UID, 2)
- }
- Device(CPU3) { // A53-3: Cluster 1, Cpu 3
- Name(_HID, "ACPI0007")
- Name(_UID, 3)
- }
- Device(CPU4) { // A57-0: Cluster 0, Cpu 0
- Name(_HID, "ACPI0007")
- Name(_UID, 4)
- }
- Device(CPU5) { // A57-1: Cluster 0, Cpu 1
- Name(_HID, "ACPI0007")
- Name(_UID, 5)
+ Name (_LPI, Package() {
+ 0, // Version
+ 0, // Level Index
+ 1, // Count
+ Package() { // Power Gating state for Cluster
+ 2500, // Min residency (uS)
+ 1150, // Wake latency (uS)
+ 1, // Flags
+ 1, // Arch Context Flags
+ 100, //Residency Counter Frequency
+ 0, // No Parent State
+ 0x01000000, // Integer Entry method
+ ResourceTemplate() { // Null Residency Counter
+ Register (SystemMemory, 0, 0, 0, 0)
+ },
+ ResourceTemplate() { // Null Usage Counter
+ Register (SystemMemory, 0, 0, 0, 0)
+ },
+ "CluPwrDn"
+ },
+ })
+ Name(PLPI, Package() {
+ 0, // Version
+ 1, // Level Index
+ 2, // Count
+ Package() { // WFI for CPU
+ 1, // Min residency (uS)
+ 1, // Wake latency (uS)
+ 1, // Flags
+ 0, // Arch Context Flags
+ 100, //Residency Counter Frequency
+ 0, // No parent state
+ ResourceTemplate () {
+ // Register Entry method
+ Register (FFixedHW,
+ 0x20, // Bit Width
+ 0x00, // Bit Offset
+ 0xFFFFFFFF, // Address
+ 0x03, // Access Size
+ )
+ },
+ ResourceTemplate() { // Null Residency Counter
+ Register (SystemMemory, 0, 0, 0, 0)
+ },
+ ResourceTemplate() { // Null Usage Counter
+ Register (SystemMemory, 0, 0, 0, 0)
+ },
+ "WFI",
+ },
+ Package() { // Power Gating state for CPU
+ 150, // Min residency (uS)
+ 350, // Wake latency (uS)
+ 1, // Flags
+ 1, // Arch Context Flags
+ 100, //Residency Counter Frequency
+ 1, // Parent node can be in any state
+ ResourceTemplate () {
+ // Register Entry method
+ Register (FFixedHW,
+ 0x20, // Bit Width
+ 0x00, // Bit Offset
+ 0x00010000, // Address
+ 0x03, // Access Size
+ )
+ },
+ ResourceTemplate() { // Null Residency Counter
+ Register (SystemMemory, 0, 0, 0, 0)
+ },
+ ResourceTemplate() { // Null Usage Counter
+ Register (SystemMemory, 0, 0, 0, 0)
+ },
+ "CorePwrDn"
+ },
+ })
+ Device(CPU2) { // A53-0: Cluster 1, Cpu 0
+ Name(_HID, "ACPI0007")
+ Name(_UID, 0)
+ Method (_LPI, 0, NotSerialized) {
+ return(PLPI)
+ }
+ }
+ Device(CPU3) { // A53-1: Cluster 1, Cpu 1
+ Name(_HID, "ACPI0007")
+ Name(_UID, 1)
+ Method (_LPI, 0, NotSerialized) {
+ return(PLPI)
+ }
+ }
+ Device(CPU4) { // A53-2: Cluster 1, Cpu 2
+ Name(_HID, "ACPI0007")
+ Name(_UID, 2)
+ Method (_LPI, 0, NotSerialized) {
+ return(PLPI)
+ }
+ }
+ Device(CPU5) { // A53-3: Cluster 1, Cpu 3
+ Name(_HID, "ACPI0007")
+ Name(_UID, 3)
+ Method (_LPI, 0, NotSerialized) {
+ return(PLPI)
+ }
+ }
}
//
--
2.7.4
reply other threads:[~2016-08-25 17:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472144963-17785-1-git-send-email-sudeep.holla@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox