From: Thomas Huth <thuth@redhat.com>
To: edk2-devel@ml01.01.org
Cc: Jordan Justen <jordan.l.justen@intel.com>,
Laszlo Ersek <lersek@redhat.com>
Subject: [PATCH] OvmfPkg: Fix typing errors in header files
Date: Tue, 13 Sep 2016 10:33:20 +0200 [thread overview]
Message-ID: <1473755600-16013-1-git-send-email-thuth@redhat.com> (raw)
Correct some typos in the header files of the OvmfPkg
(which have been discovered with the codespell utility).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
Sorry, in my previous patch, I only scanned the *.c files
and forgot to include the *.h files, too. So here's a
another patch for the header files...
OvmfPkg/Include/IndustryStandard/LinuxBzimage.h | 2 +-
OvmfPkg/Include/IndustryStandard/Xen/io/blkif.h | 2 +-
OvmfPkg/Include/Library/LoadLinuxLib.h | 2 +-
OvmfPkg/Include/Protocol/XenBus.h | 6 +++---
OvmfPkg/VirtioScsiDxe/VirtioScsi.h | 2 +-
OvmfPkg/XenBusDxe/GrantTable.h | 2 +-
OvmfPkg/XenBusDxe/XenStore.h | 2 +-
7 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/OvmfPkg/Include/IndustryStandard/LinuxBzimage.h b/OvmfPkg/Include/IndustryStandard/LinuxBzimage.h
index b83b791..a6d8999 100644
--- a/OvmfPkg/Include/IndustryStandard/LinuxBzimage.h
+++ b/OvmfPkg/Include/IndustryStandard/LinuxBzimage.h
@@ -45,7 +45,7 @@ struct setup_header {
UINT16 movesize;
UINT32 code32_start; /* Start of code loaded high */
UINT32 ramdisk_start; /* Start of initial ramdisk */
- UINT32 ramdisk_len; /* Lenght of initial ramdisk */
+ UINT32 ramdisk_len; /* Length of initial ramdisk */
UINT32 bootsect_kludge;
UINT16 heap_end;
UINT8 ext_loader_ver; /* Extended boot loader version */
diff --git a/OvmfPkg/Include/IndustryStandard/Xen/io/blkif.h b/OvmfPkg/Include/IndustryStandard/Xen/io/blkif.h
index ebed579..27774d6 100644
--- a/OvmfPkg/Include/IndustryStandard/Xen/io/blkif.h
+++ b/OvmfPkg/Include/IndustryStandard/Xen/io/blkif.h
@@ -59,7 +59,7 @@
* All data in the XenStore is stored as strings. Nodes specifying numeric
* values are encoded in decimal. Integer value ranges listed below are
* expressed as fixed sized integer types capable of storing the conversion
- * of a properly formated node string, without loss of information.
+ * of a properly formatted node string, without loss of information.
*
* Any specified default value is in effect if the corresponding XenBus node
* is not present in the XenStore.
diff --git a/OvmfPkg/Include/Library/LoadLinuxLib.h b/OvmfPkg/Include/Library/LoadLinuxLib.h
index 36ee352..d332499 100644
--- a/OvmfPkg/Include/Library/LoadLinuxLib.h
+++ b/OvmfPkg/Include/Library/LoadLinuxLib.h
@@ -44,7 +44,7 @@ LoadLinuxCheckKernelSetup (
@param[in] KernelSetup - The kernel setup image
@param[in] KernelSize - The kernel size on disk.
- @retval 0 An error occured
+ @retval 0 An error occurred
@retval !0 The initial size required by the kernel to
begin execution.
diff --git a/OvmfPkg/Include/Protocol/XenBus.h b/OvmfPkg/Include/Protocol/XenBus.h
index 3509691..f5b1cbc 100644
--- a/OvmfPkg/Include/Protocol/XenBus.h
+++ b/OvmfPkg/Include/Protocol/XenBus.h
@@ -224,7 +224,7 @@ XENSTORE_STATUS
@param DomainId ID of the domain to grant acces to.
@param Frame Frame Number of the page to grant access to.
@param ReadOnly Provide read-only or read-write access.
- @param RefPtr Reference number of the grant will be writen to this pointer.
+ @param RefPtr Reference number of the grant will be written to this pointer.
**/
typedef
EFI_STATUS
@@ -310,7 +310,7 @@ UINT32
@return On success, XENSTORE_STATUS_SUCCESS. Otherwise an errno value
indicating the type of write failure. EEXIST errors from the
- XenStore are supressed, allowing multiple, physically different,
+ XenStore are suppressed, allowing multiple, physically different,
xenbus_watch objects, to watch the same path in the XenStore.
**/
typedef
@@ -333,7 +333,7 @@ XENSTORE_STATUS
@return On success, XENSTORE_STATUS_SUCCESS. Otherwise an errno value
indicating the type of write failure. EEXIST errors from the
- XenStore are supressed, allowing multiple, physically different,
+ XenStore are suppressed, allowing multiple, physically different,
xenbus_watch objects, to watch the same path in the XenStore.
**/
typedef
diff --git a/OvmfPkg/VirtioScsiDxe/VirtioScsi.h b/OvmfPkg/VirtioScsiDxe/VirtioScsi.h
index 80840d3..6d00567 100644
--- a/OvmfPkg/VirtioScsiDxe/VirtioScsi.h
+++ b/OvmfPkg/VirtioScsiDxe/VirtioScsi.h
@@ -32,7 +32,7 @@
// identification, and 8 bytes for LUN identification.
//
// EFI_EXT_SCSI_PASS_THRU_MODE.AdapterId is also a target identifier,
-// consisting of 4 bytes. Make sure TARGET_MAX_BYTES can accomodate both
+// consisting of 4 bytes. Make sure TARGET_MAX_BYTES can accommodate both
// AdapterId and our target identifiers.
//
#if TARGET_MAX_BYTES < 4
diff --git a/OvmfPkg/XenBusDxe/GrantTable.h b/OvmfPkg/XenBusDxe/GrantTable.h
index 194275b..28195b6 100644
--- a/OvmfPkg/XenBusDxe/GrantTable.h
+++ b/OvmfPkg/XenBusDxe/GrantTable.h
@@ -47,7 +47,7 @@ XenGrantTableDeinit (
@param DomainId ID of the domain to grant acces to.
@param Frame Frame Number of the page to grant access to.
@param ReadOnly Provide read-only or read-write access.
- @param RefPtr Reference number of the grant will be writen to this pointer.
+ @param RefPtr Reference number of the grant will be written to this pointer.
**/
EFI_STATUS
EFIAPI
diff --git a/OvmfPkg/XenBusDxe/XenStore.h b/OvmfPkg/XenBusDxe/XenStore.h
index de56901..c9d4c65 100644
--- a/OvmfPkg/XenBusDxe/XenStore.h
+++ b/OvmfPkg/XenBusDxe/XenStore.h
@@ -229,7 +229,7 @@ XenStoreVSPrint (
@return On success, XENSTORE_STATUS_SUCCESS. Otherwise an errno value
indicating the type of write failure. EEXIST errors from the
- XenStore are supressed, allowing multiple, physically different,
+ XenStore are suppressed, allowing multiple, physically different,
xenbus_watch objects, to watch the same path in the XenStore.
**/
XENSTORE_STATUS
--
1.8.3.1
next reply other threads:[~2016-09-13 8:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-13 8:33 Thomas Huth [this message]
2016-09-13 12:20 ` [PATCH] OvmfPkg: Fix typing errors in header files Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473755600-16013-1-git-send-email-thuth@redhat.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox