* [PATCH v3 00/10] enhance mmc
@ 2016-09-21 15:02 Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 01/10] MmcDxe: wait OCR busy bit free Haojian Zhuang
` (10 more replies)
0 siblings, 11 replies; 18+ messages in thread
From: Haojian Zhuang @ 2016-09-21 15:02 UTC (permalink / raw)
To: ryan.harkin, edk2-devel, leif.lindholm, ard.biesheuvel; +Cc: Haojian Zhuang
v3:
* Fix PL180 hang because of CMD6 & ACMD51 not supported.
v2:
* Fix print error with missing parameter.
* Change CMD51 to ACMD51.
* Add the protection after CMD55 for SD. If there's no
response of CMD55, skip to send ACMD51.
v1:
* Wait OCR busy bit free according to eMMC spec.
* Define ECSD structure.
* Add interface to set IO bus width and speed.
* Support to access multiple blocks.
Haojian Zhuang (10):
MmcDxe: wait OCR busy bit free
MmcDxe: move ECSD into CardInfo structure
MmcDxe: add SPEC_VERS field in CSD structure
MmcDxe: add interface to change io width and speed
MmcDxe: declare ECSD structure
MmcDxe: set io bus width before reading EXTCSD
MmcDxe: Fix uninitialized mediaid for SD
MmcDxe: set iospeed and bus width in SD stack
MmcDxe: expand to support multiple blocks
PL180: update for indentifying SD
ArmPlatformPkg/Drivers/PL180MciDxe/PL180Mci.c | 15 +-
EmbeddedPkg/Include/Protocol/MmcHost.h | 29 ++
EmbeddedPkg/Universal/MmcDxe/Mmc.h | 176 +++++++++++-
EmbeddedPkg/Universal/MmcDxe/MmcBlockIo.c | 175 ++++++++----
EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 350 +++++++++++++++++++++--
5 files changed, 659 insertions(+), 86 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v3 01/10] MmcDxe: wait OCR busy bit free
2016-09-21 15:02 [PATCH v3 00/10] enhance mmc Haojian Zhuang
@ 2016-09-21 15:02 ` Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 02/10] MmcDxe: move ECSD into CardInfo structure Haojian Zhuang
` (9 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: Haojian Zhuang @ 2016-09-21 15:02 UTC (permalink / raw)
To: ryan.harkin, edk2-devel, leif.lindholm, ard.biesheuvel; +Cc: Haojian Zhuang
According to eMMC spec, OCR.PowerUp bit is also busy bit. If the busy
bit is '0', CMD1 should be sent and OCR should be fetched again. And add
a timeout counter on the repeated steps.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
index 2d8038f..0b0a044 100644
--- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
+++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
@@ -222,14 +222,19 @@ MmcIdentificationMode (
// Send CMD1 to get OCR (MMC)
// This command only valid for MMC and eMMC
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD1, EMMC_CMD1_CAPACITY_GREATER_THAN_2GB);
- if (Status == EFI_SUCCESS) {
+ Timeout = MAX_RETRY_COUNT;
+ do {
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD1, EMMC_CMD1_CAPACITY_GREATER_THAN_2GB);
+ if (EFI_ERROR (Status))
+ break;
Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_OCR, (UINT32 *)&OcrResponse);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Failed to receive OCR, Status=%r.\n", Status));
return Status;
}
-
+ Timeout--;
+ } while (!OcrResponse.Ocr.PowerUp && (Timeout > 0));
+ if (Status == EFI_SUCCESS) {
if (!OcrResponse.Ocr.PowerUp) {
DEBUG ((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD1): Card initialisation failure, Status=%r.\n", Status));
return EFI_DEVICE_ERROR;
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 02/10] MmcDxe: move ECSD into CardInfo structure
2016-09-21 15:02 [PATCH v3 00/10] enhance mmc Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 01/10] MmcDxe: wait OCR busy bit free Haojian Zhuang
@ 2016-09-21 15:02 ` Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 03/10] MmcDxe: add SPEC_VERS field in CSD structure Haojian Zhuang
` (8 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: Haojian Zhuang @ 2016-09-21 15:02 UTC (permalink / raw)
To: ryan.harkin, edk2-devel, leif.lindholm, ard.biesheuvel; +Cc: Haojian Zhuang
Since ECSD also describes the information of card, move it into
structure CardInfo.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
EmbeddedPkg/Universal/MmcDxe/Mmc.h | 1 +
EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 5 ++---
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/EmbeddedPkg/Universal/MmcDxe/Mmc.h b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
index 46a156c..f4e0aa0 100644
--- a/EmbeddedPkg/Universal/MmcDxe/Mmc.h
+++ b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
@@ -138,6 +138,7 @@ typedef struct {
OCR OCRData;
CID CIDData;
CSD CSDData;
+ UINT32 ECSD[128]; // MMC V4 extended card specific
} CARD_INFO;
typedef struct _MMC_HOST_INSTANCE {
diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
index 0b0a044..3531fb4 100644
--- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
+++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
@@ -39,7 +39,6 @@ EmmcIdentificationMode (
EFI_BLOCK_IO_MEDIA *Media;
EFI_STATUS Status;
UINT32 RCA;
- UINT32 ECSD[128];
Host = MmcHostInstance->MmcHost;
Media = MmcHostInstance->BlockIo.Media;
@@ -91,7 +90,7 @@ EmmcIdentificationMode (
DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD fetch error, Status=%r.\n", Status));
}
- Status = Host->ReadBlockData (Host, 0, 512, ECSD);
+ Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)&(MmcHostInstance->CardInfo.ECSD));
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD read error, Status=%r.\n", Status));
return Status;
@@ -104,7 +103,7 @@ EmmcIdentificationMode (
Media->LogicalBlocksPerPhysicalBlock = 1;
Media->IoAlign = 4;
// Compute last block using bits [215:212] of the ECSD
- Media->LastBlock = ECSD[EMMC_ECSD_SIZE_OFFSET] - 1; // eMMC isn't supposed to report this for
+ Media->LastBlock = MmcHostInstance->CardInfo.ECSD[EMMC_ECSD_SIZE_OFFSET] - 1; // eMMC isn't supposed to report this for
// Cards <2GB in size, but the model does.
// Setup card type
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 03/10] MmcDxe: add SPEC_VERS field in CSD structure
2016-09-21 15:02 [PATCH v3 00/10] enhance mmc Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 01/10] MmcDxe: wait OCR busy bit free Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 02/10] MmcDxe: move ECSD into CardInfo structure Haojian Zhuang
@ 2016-09-21 15:02 ` Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 04/10] MmcDxe: add interface to change io width and speed Haojian Zhuang
` (7 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: Haojian Zhuang @ 2016-09-21 15:02 UTC (permalink / raw)
To: ryan.harkin, edk2-devel, leif.lindholm, ard.biesheuvel; +Cc: Haojian Zhuang
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
EmbeddedPkg/Universal/MmcDxe/Mmc.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/EmbeddedPkg/Universal/MmcDxe/Mmc.h b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
index f4e0aa0..b1c5153 100644
--- a/EmbeddedPkg/Universal/MmcDxe/Mmc.h
+++ b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
@@ -128,7 +128,8 @@ typedef struct {
UINT8 NSAC ; // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
UINT8 TAAC ; // Data read access-time 1 [119:112]
- UINT8 RESERVED_5: 6; // Reserved [125:120]
+ UINT8 RESERVED_5: 2; // Reserved [121:120]
+ UINT8 SPEC_VERS: 4; // System specification version [125:122]
UINT8 CSD_STRUCTURE: 2; // CSD structure [127:126]
} CSD;
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 04/10] MmcDxe: add interface to change io width and speed
2016-09-21 15:02 [PATCH v3 00/10] enhance mmc Haojian Zhuang
` (2 preceding siblings ...)
2016-09-21 15:02 ` [PATCH v3 03/10] MmcDxe: add SPEC_VERS field in CSD structure Haojian Zhuang
@ 2016-09-21 15:02 ` Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 05/10] MmcDxe: declare ECSD structure Haojian Zhuang
` (6 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: Haojian Zhuang @ 2016-09-21 15:02 UTC (permalink / raw)
To: ryan.harkin, edk2-devel, leif.lindholm, ard.biesheuvel; +Cc: Haojian Zhuang
By default, MMC is initialized with 1-bit mode and less than 400KHz bus
clock. It causes MMC working inefficiently.
Add the interface to change the bus width and speed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
EmbeddedPkg/Include/Protocol/MmcHost.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/EmbeddedPkg/Include/Protocol/MmcHost.h b/EmbeddedPkg/Include/Protocol/MmcHost.h
index 89f2e80..13e99e7 100644
--- a/EmbeddedPkg/Include/Protocol/MmcHost.h
+++ b/EmbeddedPkg/Include/Protocol/MmcHost.h
@@ -131,6 +131,12 @@ typedef EFI_STATUS (EFIAPI *MMC_WRITEBLOCKDATA) (
IN UINT32 *Buffer
);
+typedef EFI_STATUS (EFIAPI *MMC_SETIOS) (
+ IN EFI_MMC_HOST_PROTOCOL *This,
+ IN UINT32 BusClockRate,
+ IN UINT32 BusWidth
+ );
+
struct _EFI_MMC_HOST_PROTOCOL {
@@ -147,6 +153,8 @@ struct _EFI_MMC_HOST_PROTOCOL {
MMC_READBLOCKDATA ReadBlockData;
MMC_WRITEBLOCKDATA WriteBlockData;
+ MMC_SETIOS SetIos;
+
};
#define MMC_HOST_PROTOCOL_REVISION 0x00010001 // 1.1
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 05/10] MmcDxe: declare ECSD structure
2016-09-21 15:02 [PATCH v3 00/10] enhance mmc Haojian Zhuang
` (3 preceding siblings ...)
2016-09-21 15:02 ` [PATCH v3 04/10] MmcDxe: add interface to change io width and speed Haojian Zhuang
@ 2016-09-21 15:02 ` Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 06/10] MmcDxe: set io bus width before reading EXTCSD Haojian Zhuang
` (5 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: Haojian Zhuang @ 2016-09-21 15:02 UTC (permalink / raw)
To: ryan.harkin, edk2-devel, leif.lindholm, ard.biesheuvel; +Cc: Haojian Zhuang
Declare fields in ECSD structure. And drop the original 128 words
arrary.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
EmbeddedPkg/Universal/MmcDxe/Mmc.h | 157 ++++++++++++++++++++++-
EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 4 +-
2 files changed, 158 insertions(+), 3 deletions(-)
diff --git a/EmbeddedPkg/Universal/MmcDxe/Mmc.h b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
index b1c5153..0ccbc80 100644
--- a/EmbeddedPkg/Universal/MmcDxe/Mmc.h
+++ b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
@@ -133,13 +133,168 @@ typedef struct {
UINT8 CSD_STRUCTURE: 2; // CSD structure [127:126]
} CSD;
+typedef struct {
+ UINT8 RESERVED_1[16]; // Reserved [15:0]
+ UINT8 SECURE_REMOVAL_TYPE; // Secure Removal Type [16:16]
+ UINT8 PRODUCT_STATE_AWARENESS_ENABLEMENT; // Product state awareness enablement [17:17]
+ UINT8 MAX_PRE_LOADING_DATA_SIZE[4]; // MAX pre loading data size [21:18]
+ UINT8 PRE_LOADING_DATA_SIZE[4]; // Pre loading data size [25:22]
+ UINT8 FFU_STATUS; // FFU Status [26:26]
+ UINT8 RESERVED_2[2]; // Reserved [28:27]
+ UINT8 MODE_OPERATION_CODES; // Mode operation codes [29:29]
+ UINT8 MODE_CONFIG; // Mode config [30:30]
+ UINT8 RESERVED_3; // Reserved [31:31]
+ UINT8 FLUSH_CACHE; // Flushing of the cache [32:32]
+ UINT8 CACHE_CTRL; // Control to turn the cache ON/OFF [33:33]
+ UINT8 POWER_OFF_NOTIFICATION; // Power Off Notification [34:34]
+ UINT8 PACKED_FAILURE_INDEX; // Packed command failure index [35:35]
+ UINT8 PACKED_COMMAND_STATUS; // Packed command status [36:36]
+ UINT8 CONTEXT_CONF[15]; // Context configuration [51:37]
+ UINT8 EXT_PARTITIONS_ATTRIBUTE[2]; // Extended partitions attribute [53:52]
+ UINT8 EXCEPTION_EVENTS_STATUS[2]; // Exception events status [55:54]
+ UINT8 EXCEPTION_EVENTS_CTRL[2]; // Exception events control [57:56]
+ UINT8 DYNCAP_NEEDED; // Number of addressed group to be released [58:58]
+ UINT8 CLASS_6_CTRL; // Class 6 commands control [59:59]
+ UINT8 INI_TIMEOUT_EMU; // 1st initialization after disabling sector size emulation [60:60]
+ UINT8 DATA_SECTOR_SIZE; // Sector size [61:61]
+ UINT8 USE_NATIVE_SECTOR; // Sector size emulation [62:62]
+ UINT8 NATIVE_SECTOR_SIZE; // Native sector size [63:63]
+ UINT8 VENDOR_SPECIFIC_FIELD[64]; // Vendor specific fields [127:64]
+ UINT8 RESERVED_4[2]; // Reserved [129:128]
+ UINT8 PROGRAM_CID_CSD_DDR_SUPPORT; // Program CID/CSD in DDR mode support [130:130]
+ UINT8 PERIODIC_WAKEUP; // Periodic wake-up [131:131]
+ UINT8 TCASE_SUPPORT; // Package case temperature is controlled [132:132]
+ UINT8 PRODUCTION_STATE_AWARENESS; // Production state awareness [133:133]
+ UINT8 SEC_BAD_BLK_MGMNT; // Bad block management mode [134:134]
+ UINT8 RESERVED_5; // Reserved [135:135]
+ UINT8 ENH_START_ADDR[4]; // Enhanced user data start address [139:136]
+ UINT8 ENH_SIZE_MULT[3]; // Enhanced user data area size [142:140]
+ UINT8 GP_SIZE_MULT[12]; // General purpose partition size [154:143]
+ UINT8 PARTITION_SETTING_COMPLETED; // Partitioning setting [155:155]
+ UINT8 PARTITIONS_ATTRIBUTE; // Partitions attribute [156:156]
+ UINT8 MAX_ENH_SIZE_MULT[3]; // Max enhanced area size [159:157]
+ UINT8 PARTITIONING_SUPPORT; // Partitioning [160:160]
+ UINT8 HPI_MGMT; // HPI management [161:161]
+ UINT8 RST_N_FUNCTION; // H/W reset function [162:162]
+ UINT8 BKOPS_EN; // Enable background operations handshake [163:163]
+ UINT8 BKOPS_START; // Manually start background operations [164:164]
+ UINT8 SANITIZE_START; // Start sanitize operation [165:165]
+ UINT8 WR_REL_PARAM; // Write reliability parameter register [166:166]
+ UINT8 WR_REL_SET; // Write reliability setting register [167:167]
+ UINT8 RPMB_SIZE_MULT; // RPMB size [168:168]
+ UINT8 FW_CONFIG; // FW configuration [169:169]
+ UINT8 RESERVED_6; // Reserved [170:170]
+ UINT8 USER_WP; // User area write protection register [171:171]
+ UINT8 RESERVED_7; // Reserved [172:172]
+ UINT8 BOOT_WP; // Boot area write protection register [173:173]
+ UINT8 BOOT_WP_STATUS; // Boot write protection register [174:174]
+ UINT8 ERASE_GROUP_DEF; // High-density erase group definition [175:175]
+ UINT8 RESERVED_8; // Reserved [176:176]
+ UINT8 BOOT_BUS_CONDITIONS; // Boot bus conditions [177:177]
+ UINT8 BOOT_CONFIG_PROT; // Boot config protection [178:178]
+ UINT8 PARTITION_CONFIG; // Partition config [179:179]
+ UINT8 RESERVED_9; // Reserved [180:180]
+ UINT8 ERASED_MEM_CONT; // Erased memory content [181:181]
+ UINT8 RESERVED_10; // Reserved [182:182]
+ UINT8 BUS_WIDTH; // Bus width mode [183:183]
+ UINT8 RESERVED_11; // Reserved [184:184]
+ UINT8 HS_TIMING; // High-speed interface timing [185:185]
+ UINT8 RESERVED_12; // Reserved [186:186]
+ UINT8 POWER_CLASS; // Power class [187:187]
+ UINT8 RESERVED_13; // Reserved [188:188]
+ UINT8 CMD_SET_REV; // Command set revision [189:189]
+ UINT8 RESERVED_14; // Reserved [190:190]
+ UINT8 CMD_SET; // Command set [191:191]
+ UINT8 EXT_CSD_REV; // Extended CSD revision [192:192]
+ UINT8 RESERVED_15; // Reserved [193:193]
+ UINT8 CSD_STRUCTURE; // CSD Structure [194:194]
+ UINT8 RESERVED_16; // Reserved [195:195]
+ UINT8 DEVICE_TYPE; // Device type [196:196]
+ UINT8 DRIVER_STRENGTH; // I/O Driver strength [197:197]
+ UINT8 OUT_OF_INTERRUPT_TIME; // Out-of-interrupt busy timing [198:198]
+ UINT8 PARTITION_SWITCH_TIME; // Partition switching timing [199:199]
+ UINT8 PWR_CL_52_195; // Power class for 52MHz at 1.95V 1 R [200:200]
+ UINT8 PWR_CL_26_195; // Power class for 26MHz at 1.95V 1 R [201:201]
+ UINT8 PWR_CL_52_360; // Power class for 52MHz at 3.6V 1 R [202:202]
+ UINT8 PWR_CL_26_360; // Power class for 26MHz at 3.6V 1 R [203:203]
+ UINT8 RESERVED_17; // Reserved [204:204]
+ UINT8 MIN_PERF_R_4_26; // Minimum read performance for 4bit at 26MHz [205:205]
+ UINT8 MIN_PERF_W_4_26; // Minimum write performance for 4bit at 26MHz [206:206]
+ UINT8 MIN_PERF_R_8_26_4_52; // Minimum read performance for 8bit at 26MHz, for 4bit at 52MHz [207:207]
+ UINT8 MIN_PERF_W_8_26_4_52; // Minimum write performance for 8bit at 26MHz, for 4bit at 52MHz [208:208]
+ UINT8 MIN_PERF_R_8_52; // Minimum read performance for 8bit at 52MHz [209:209]
+ UINT8 MIN_PERF_W_8_52; // Minimum write performance for 8bit at 52MHz [210:210]
+ UINT8 RESERVED_18; // Reserved [211:211]
+ UINT32 SEC_COUNT; // Sector count [215:212]
+ UINT8 SLEEP_NOTIFICATION_TIME; // Sleep notification timout [216:216]
+ UINT8 S_A_TIMEOUT; // Sleep/awake timeout [217:217]
+ UINT8 PRODUCTION_STATE_AWARENESS_TIMEOUT; // Production state awareness timeout [218:218]
+ UINT8 S_C_VCCQ; // Sleep current (VCCQ) [219:219]
+ UINT8 S_C_VCC; // Sleep current (VCC) [220:220]
+ UINT8 HC_WP_GRP_SIZE; // High-capacity write protect group size [221:221]
+ UINT8 REL_WR_SEC_C; // Reliable write sector count [222:222]
+ UINT8 ERASE_TIMEOUT_MULT; // High-capacity erase timeout [223:223]
+ UINT8 HC_ERASE_GRP_SIZE; // High-capacity erase unit size [224:224]
+ UINT8 ACC_SIZE; // Access size [225:225]
+ UINT8 BOOT_SIZE_MULTI; // Boot partition size [226:226]
+ UINT8 RESERVED_19; // Reserved [227:227]
+ UINT8 BOOT_INFO; // Boot information [228:228]
+ UINT8 SEC_TRIM_MULT; // Secure TRIM Multiplier [229:229]
+ UINT8 SEC_ERASE_MULT; // Secure Erase Multiplier [230:230]
+ UINT8 SEC_FEATURE_SUPPORT; // Secure Feature Support [231:231]
+ UINT8 TRIM_MULT; // TRIM Multiplier [232:232]
+ UINT8 RESERVED_20; // Reserved [233:233]
+ UINT8 MIN_PREF_DDR_R_8_52; // Minimum read performance for 8bit at 52MHz in DDR mode [234:234]
+ UINT8 MIN_PREF_DDR_W_8_52; // Minimum write performance for 8bit at 52MHz in DDR mode [235:235]
+ UINT8 PWR_CL_200_130; // Power class for 200MHz at VCCQ=1.3V, VCC=3.6V [236:236]
+ UINT8 PWR_CL_200_195; // Power class for 200MHz at VCCQ=1.95V, VCC=3.6V [237:237]
+ UINT8 PWR_CL_DDR_52_195; // Power class for 52MHz, DDR at 1.95V [238:238]
+ UINT8 PWR_CL_DDR_52_360; // Power class for 52Mhz, DDR at 3.6V [239:239]
+ UINT8 RESERVED_21; // Reserved [240:240]
+ UINT8 INI_TIMEOUT_AP; // 1st initialization time after partitioning [241:241]
+ UINT8 CORRECTLY_PRG_SECTORS_NUM[4]; // Number of correctly programmed sectors [245:242]
+ UINT8 BKOPS_STATUS; // Background operations status [246:246]
+ UINT8 POWER_OFF_LONG_TIME; // Power off notification (long) timeout [247:247]
+ UINT8 GENERIC_CMD6_TIME; // Generic CMD6 timeout [248:248]
+ UINT8 CACHE_SIZE[4]; // Cache size [252:249]
+ UINT8 PWR_CL_DDR_200_360; // Power class for 200MHz, DDR at VCC=3.6V [253:253]
+ UINT8 FIRMWARE_VERSION[8]; // Firmware version [261:254]
+ UINT8 DEVICE_VERSION[2]; // Device version [263:262]
+ UINT8 OPTIMAL_TRIM_UNIT_SIZE; // Optimal trim unit size [264:264]
+ UINT8 OPTIMAL_WRITE_SIZE; // Optimal write size [265:265]
+ UINT8 OPTIMAL_READ_SIZE; // Optimal read size [266:266]
+ UINT8 PRE_EOL_INFO; // Pre EOL information [267:267]
+ UINT8 DEVICE_LIFE_TIME_EST_TYP_A; // Device life time estimation type A [268:268]
+ UINT8 DEVICE_LIFE_TIME_EST_TYP_B; // Device life time estimation type B [269:269]
+ UINT8 VENDOR_PROPRIETARY_HEALTH_REPORT[32]; // Vendor proprietary health report [301:270]
+ UINT8 NUMBER_OF_FW_SECTORS_CORRECTLY_PROGRAMMED[4]; // Number of FW sectors correctly programmed [305:302]
+ UINT8 RESERVED_22[181]; // Reserved [486:306]
+ UINT8 FFU_ARG[4]; // FFU argument [490:487]
+ UINT8 OPERATION_CODE_TIMEOUT; // Operation codes timeout [491:491]
+ UINT8 FFU_FEATURES; // FFU features [492:492]
+ UINT8 SUPPORTED_MODES; // Supported modes [493:493]
+ UINT8 EXT_SUPPORT; // Extended partitions attribute support [494:494]
+ UINT8 LARGE_UNIT_SIZE_M1; // Large unit size [495:495]
+ UINT8 CONTEXT_CAPABILITIES; // Context management capabilities [496:496]
+ UINT8 TAG_RES_SIZE; // Tag resource size [497:497]
+ UINT8 TAG_UNIT_SIZE; // Tag unit size [498:498]
+ UINT8 DATA_TAG_SUPPORT; // Data tag support [499:499]
+ UINT8 MAX_PACKED_WRITES; // Max packed write commands [500:500]
+ UINT8 MAX_PACKED_READS; // Max packed read commands [501:501]
+ UINT8 BKOPS_SUPPORT; // Background operations support [502:502]
+ UINT8 HPI_FEATURES; // HPI features [503:503]
+ UINT8 S_CMD_SET; // Supported command sets [504:504]
+ UINT8 EXT_SECURITY_ERR; // Extended security commands error [505:505]
+ UINT8 RESERVED_23[6]; // Reserved [511:506]
+} ECSD;
+
typedef struct {
UINT16 RCA;
CARD_TYPE CardType;
OCR OCRData;
CID CIDData;
CSD CSDData;
- UINT32 ECSD[128]; // MMC V4 extended card specific
+ ECSD ECSDData; // MMC V4 extended card specific
} CARD_INFO;
typedef struct _MMC_HOST_INSTANCE {
diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
index 3531fb4..5be3d86 100644
--- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
+++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
@@ -90,7 +90,7 @@ EmmcIdentificationMode (
DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD fetch error, Status=%r.\n", Status));
}
- Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)&(MmcHostInstance->CardInfo.ECSD));
+ Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)&(MmcHostInstance->CardInfo.ECSDData));
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD read error, Status=%r.\n", Status));
return Status;
@@ -103,7 +103,7 @@ EmmcIdentificationMode (
Media->LogicalBlocksPerPhysicalBlock = 1;
Media->IoAlign = 4;
// Compute last block using bits [215:212] of the ECSD
- Media->LastBlock = MmcHostInstance->CardInfo.ECSD[EMMC_ECSD_SIZE_OFFSET] - 1; // eMMC isn't supposed to report this for
+ Media->LastBlock = MmcHostInstance->CardInfo.ECSDData.SEC_COUNT - 1; // eMMC isn't supposed to report this for
// Cards <2GB in size, but the model does.
// Setup card type
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 06/10] MmcDxe: set io bus width before reading EXTCSD
2016-09-21 15:02 [PATCH v3 00/10] enhance mmc Haojian Zhuang
` (4 preceding siblings ...)
2016-09-21 15:02 ` [PATCH v3 05/10] MmcDxe: declare ECSD structure Haojian Zhuang
@ 2016-09-21 15:02 ` Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 07/10] MmcDxe: Fix uninitialized mediaid for SD Haojian Zhuang
` (4 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: Haojian Zhuang @ 2016-09-21 15:02 UTC (permalink / raw)
To: ryan.harkin, edk2-devel, leif.lindholm, ard.biesheuvel; +Cc: Haojian Zhuang
Set io bus width on both MMC controller and EXTCSD. Otherwise, it may
cause unmatched failure case. And support more timing mode, high speed,
HS200 & HS400 mode.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
EmbeddedPkg/Include/Protocol/MmcHost.h | 16 +-
EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 225 +++++++++++++++++++++--
2 files changed, 219 insertions(+), 22 deletions(-)
diff --git a/EmbeddedPkg/Include/Protocol/MmcHost.h b/EmbeddedPkg/Include/Protocol/MmcHost.h
index 13e99e7..5e3a2b7 100644
--- a/EmbeddedPkg/Include/Protocol/MmcHost.h
+++ b/EmbeddedPkg/Include/Protocol/MmcHost.h
@@ -49,6 +49,7 @@ typedef UINT32 MMC_CMD;
#define MMC_CMD2 (MMC_INDX(2) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_LONG_RESPONSE)
#define MMC_CMD3 (MMC_INDX(3) | MMC_CMD_WAIT_RESPONSE)
#define MMC_CMD5 (MMC_INDX(5) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_NO_CRC_RESPONSE)
+#define MMC_CMD6 (MMC_INDX(6) | MMC_CMD_WAIT_RESPONSE)
#define MMC_CMD7 (MMC_INDX(7) | MMC_CMD_WAIT_RESPONSE)
#define MMC_CMD8 (MMC_INDX(8) | MMC_CMD_WAIT_RESPONSE)
#define MMC_CMD9 (MMC_INDX(9) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_LONG_RESPONSE)
@@ -82,6 +83,16 @@ typedef enum _MMC_STATE {
MmcDisconnectState,
} MMC_STATE;
+#define EMMCBACKWARD (0)
+#define EMMCHS26 (1 << 0) // High-Speed @26MHz at rated device voltages
+#define EMMCHS52 (1 << 1) // High-Speed @52MHz at rated device voltages
+#define EMMCHS52DDR1V8 (1 << 2) // High-Speed Dual Data Rate @52MHz 1.8V or 3V I/O
+#define EMMCHS52DDR1V2 (1 << 3) // High-Speed Dual Data Rate @52MHz 1.2V I/O
+#define EMMCHS200SDR1V8 (1 << 4) // HS200 Single Data Rate @200MHz 1.8V I/O
+#define EMMCHS200SDR1V2 (1 << 5) // HS200 Single Data Rate @200MHz 1.2V I/O
+#define EMMCHS400DDR1V8 (1 << 6) // HS400 Dual Data Rate @400MHz 1.8V I/O
+#define EMMCHS400DDR1V2 (1 << 7) // HS400 Dual Data Rate @400MHz 1.2V I/O
+
///
/// Forward declaration for EFI_MMC_HOST_PROTOCOL
///
@@ -133,8 +144,9 @@ typedef EFI_STATUS (EFIAPI *MMC_WRITEBLOCKDATA) (
typedef EFI_STATUS (EFIAPI *MMC_SETIOS) (
IN EFI_MMC_HOST_PROTOCOL *This,
- IN UINT32 BusClockRate,
- IN UINT32 BusWidth
+ IN UINT32 BusClockFreq,
+ IN UINT32 BusWidth,
+ IN UINT32 TimingMode
);
diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
index 5be3d86..a5915e4 100644
--- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
+++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
@@ -25,11 +25,109 @@ typedef union {
#define EMMC_CARD_SIZE 512
#define EMMC_ECSD_SIZE_OFFSET 53
+#define EXTCSD_BUS_WIDTH 183
+#define EXTCSD_HS_TIMING 185
+
+#define EMMC_TIMING_BACKWARD 0
+#define EMMC_TIMING_HS 1
+#define EMMC_TIMING_HS200 2
+#define EMMC_TIMING_HS400 3
+
+#define EMMC_BUS_WIDTH_1BIT 0
+#define EMMC_BUS_WIDTH_4BIT 1
+#define EMMC_BUS_WIDTH_8BIT 2
+#define EMMC_BUS_WIDTH_DDR_4BIT 5
+#define EMMC_BUS_WIDTH_DDR_8BIT 6
+
+#define EMMC_SWITCH_ERROR (1 << 7)
+
+#define DEVICE_STATE(x) (((x) >> 9) & 0xf)
+typedef enum _EMMC_DEVICE_STATE {
+ EMMC_IDLE_STATE = 0,
+ EMMC_READY_STATE,
+ EMMC_IDENT_STATE,
+ EMMC_STBY_STATE,
+ EMMC_TRAN_STATE,
+ EMMC_DATA_STATE,
+ EMMC_RCV_STATE,
+ EMMC_PRG_STATE,
+ EMMC_DIS_STATE,
+ EMMC_BTST_STATE,
+ EMMC_SLP_STATE
+} EMMC_DEVICE_STATE;
+
UINT32 mEmmcRcaCount = 0;
STATIC
EFI_STATUS
EFIAPI
+EmmcGetDeviceState (
+ IN MMC_HOST_INSTANCE *MmcHostInstance,
+ OUT EMMC_DEVICE_STATE *State
+ )
+{
+ EFI_MMC_HOST_PROTOCOL *Host;
+ EFI_STATUS Status;
+ UINT32 Data, RCA;
+
+ if (State == NULL)
+ return EFI_INVALID_PARAMETER;
+
+ Host = MmcHostInstance->MmcHost;
+ RCA = MmcHostInstance->CardInfo.RCA << RCA_SHIFT_OFFSET;
+ Status = Host->SendCommand (Host, MMC_CMD13, RCA);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to get card status, Status=%r.\n", Status));
+ return Status;
+ }
+ Status = Host->ReceiveResponse (Host, MMC_RESPONSE_TYPE_R1, &Data);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to get response of CMD13, Status=%r.\n", Status));
+ return Status;
+ }
+ if (Data & EMMC_SWITCH_ERROR) {
+ DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to switch expected mode, Status=%r.\n", Status));
+ return EFI_DEVICE_ERROR;
+ }
+ *State = DEVICE_STATE(Data);
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+EmmcSetEXTCSD (
+ IN MMC_HOST_INSTANCE *MmcHostInstance,
+ UINT32 ExtCmdIndex,
+ UINT32 Value
+ )
+{
+ EFI_MMC_HOST_PROTOCOL *Host;
+ EMMC_DEVICE_STATE State;
+ EFI_STATUS Status;
+ UINT32 Argument;
+
+ Host = MmcHostInstance->MmcHost;
+ Argument = (3 << 24) | ((ExtCmdIndex & 0xff) << 16) | ((Value & 0xff) << 8) | 1;
+ Status = Host->SendCommand (Host, MMC_CMD6, Argument);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "EmmcSetEXTCSD(): Failed to send CMD6, Status=%r.\n", Status));
+ return Status;
+ }
+ // Make sure device exiting prog mode
+ do {
+ Status = EmmcGetDeviceState (MmcHostInstance, &State);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "EmmcSetEXTCSD(): Failed to get device state, Status=%r.\n", Status));
+ return Status;
+ }
+ } while (State == EMMC_PRG_STATE);
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
EmmcIdentificationMode (
IN MMC_HOST_INSTANCE *MmcHostInstance,
IN OCR_RESPONSE Response
@@ -37,6 +135,7 @@ EmmcIdentificationMode (
{
EFI_MMC_HOST_PROTOCOL *Host;
EFI_BLOCK_IO_MEDIA *Media;
+ EMMC_DEVICE_STATE State;
EFI_STATUS Status;
UINT32 RCA;
@@ -84,35 +183,117 @@ EmmcIdentificationMode (
DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Card selection error, Status=%r.\n", Status));
}
- // Fetch ECSD
- Status = Host->SendCommand (Host, MMC_CMD8, RCA);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD fetch error, Status=%r.\n", Status));
- }
+ // MMC v4 specific
+ if (MmcHostInstance->CardInfo.CSDData.SPEC_VERS == 4) {
+ if (Host->SetIos) {
+ // Set 1-bit bus width
+ Status = Host->SetIos (Host, 0, 1, EMMCBACKWARD);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Set 1-bit bus width error, Status=%r.\n", Status));
+ return Status;
+ }
- Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)&(MmcHostInstance->CardInfo.ECSDData));
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD read error, Status=%r.\n", Status));
- return Status;
- }
+ // Set 1-bit bus width for EXTCSD
+ Status = EmmcSetEXTCSD (MmcHostInstance, EXTCSD_BUS_WIDTH, EMMC_BUS_WIDTH_1BIT);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Set extcsd bus width error, Status=%r.\n", Status));
+ return Status;
+ }
+ }
+
+ // Fetch ECSD
+ Status = Host->SendCommand (Host, MMC_CMD8, RCA);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD fetch error, Status=%r.\n", Status));
+ }
+ Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)&(MmcHostInstance->CardInfo.ECSDData));
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD read error, Status=%r.\n", Status));
+ return Status;
+ }
+ // Make sure device exiting data mode
+ do {
+ Status = EmmcGetDeviceState (MmcHostInstance, &State);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): Failed to get device state, Status=%r.\n", Status));
+ return Status;
+ }
+ } while (State == EMMC_DATA_STATE);
+
+ // Compute last block using bits [215:212] of the ECSD
+ Media->LastBlock = MmcHostInstance->CardInfo.ECSDData.SEC_COUNT - 1; // eMMC isn't supposed to report this for
+ // Cards <2GB in size, but the model does.
+
+ // Setup card type
+ MmcHostInstance->CardInfo.CardType = EMMC_CARD;
+ }
// Set up media
Media->BlockSize = EMMC_CARD_SIZE; // 512-byte support is mandatory for eMMC cards
Media->MediaId = MmcHostInstance->CardInfo.CIDData.PSN;
Media->ReadOnly = MmcHostInstance->CardInfo.CSDData.PERM_WRITE_PROTECT;
Media->LogicalBlocksPerPhysicalBlock = 1;
Media->IoAlign = 4;
- // Compute last block using bits [215:212] of the ECSD
- Media->LastBlock = MmcHostInstance->CardInfo.ECSDData.SEC_COUNT - 1; // eMMC isn't supposed to report this for
- // Cards <2GB in size, but the model does.
-
- // Setup card type
- MmcHostInstance->CardInfo.CardType = EMMC_CARD;
return EFI_SUCCESS;
}
STATIC
EFI_STATUS
+InitializeEmmcDevice (
+ IN MMC_HOST_INSTANCE *MmcHostInstance
+ )
+{
+ EFI_MMC_HOST_PROTOCOL *Host;
+ EFI_STATUS Status = EFI_SUCCESS;
+ ECSD *ECSDData;
+ BOOLEAN Found = FALSE;
+ UINT32 BusClockFreq, Idx;
+ UINT32 TimingMode[4] = {EMMCHS52DDR1V2, EMMCHS52DDR1V8, EMMCHS52, EMMCHS26};
+
+ Host = MmcHostInstance->MmcHost;
+ if (MmcHostInstance->CardInfo.CSDData.SPEC_VERS < 4)
+ return EFI_SUCCESS;
+ ECSDData = &MmcHostInstance->CardInfo.ECSDData;
+ if (ECSDData->DEVICE_TYPE == EMMCBACKWARD)
+ return EFI_SUCCESS;
+
+ if (Host->SetIos) {
+ Status = EmmcSetEXTCSD (MmcHostInstance, EXTCSD_HS_TIMING, EMMC_TIMING_HS);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "InitializeEmmcDevice(): Failed to switch high speed mode, Status:%r.\n", Status));
+ return Status;
+ }
+
+ for (Idx = 0; Idx < 4; Idx++) {
+ switch (TimingMode[Idx]) {
+ case EMMCHS52DDR1V2:
+ case EMMCHS52DDR1V8:
+ case EMMCHS52:
+ BusClockFreq = 52000000;
+ break;
+ case EMMCHS26:
+ BusClockFreq = 26000000;
+ break;
+ default:
+ return EFI_UNSUPPORTED;
+ }
+ Status = Host->SetIos (Host, BusClockFreq, 8, TimingMode[Idx]);
+ if (!EFI_ERROR (Status)) {
+ Found = TRUE;
+ break;
+ }
+ }
+ if (Found) {
+ Status = EmmcSetEXTCSD (MmcHostInstance, EXTCSD_BUS_WIDTH, EMMC_BUS_WIDTH_DDR_8BIT);
+ if (EFI_ERROR (Status))
+ DEBUG ((DEBUG_ERROR, "InitializeEmmcDevice(): Failed to set EXTCSD bus width, Status:%r\n", Status));
+ }
+ }
+ return Status;
+}
+
+STATIC
+EFI_STATUS
InitializeSdMmcDevice (
IN MMC_HOST_INSTANCE *MmcHostInstance
)
@@ -429,11 +610,15 @@ InitializeMmcDevice (
return Status;
}
- if (MmcHostInstance->CardInfo.CardType != EMMC_CARD) {
- Status = InitializeSdMmcDevice (MmcHostInstance);
- if (EFI_ERROR (Status)) {
- return Status;
+ if (MmcHostInstance->CardInfo.CardType == EMMC_CARD) {
+ if (MmcHost->SetIos) {
+ Status = InitializeEmmcDevice (MmcHostInstance);
}
+ } else {
+ Status = InitializeSdMmcDevice (MmcHostInstance);
+ }
+ if (EFI_ERROR (Status)) {
+ return Status;
}
// Set Block Length
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 07/10] MmcDxe: Fix uninitialized mediaid for SD
2016-09-21 15:02 [PATCH v3 00/10] enhance mmc Haojian Zhuang
` (5 preceding siblings ...)
2016-09-21 15:02 ` [PATCH v3 06/10] MmcDxe: set io bus width before reading EXTCSD Haojian Zhuang
@ 2016-09-21 15:02 ` Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 08/10] MmcDxe: set iospeed and bus width in SD stack Haojian Zhuang
` (3 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: Haojian Zhuang @ 2016-09-21 15:02 UTC (permalink / raw)
To: ryan.harkin, edk2-devel, leif.lindholm, ard.biesheuvel; +Cc: Haojian Zhuang
When SD card is used, mediaid is not initialized and used directly. So
fix it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
index a5915e4..f806bfc 100644
--- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
+++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
@@ -57,6 +57,7 @@ typedef enum _EMMC_DEVICE_STATE {
} EMMC_DEVICE_STATE;
UINT32 mEmmcRcaCount = 0;
+UINT32 CurrentMediaId = 0;
STATIC
EFI_STATUS
@@ -231,6 +232,10 @@ EmmcIdentificationMode (
// Set up media
Media->BlockSize = EMMC_CARD_SIZE; // 512-byte support is mandatory for eMMC cards
Media->MediaId = MmcHostInstance->CardInfo.CIDData.PSN;
+ if (CurrentMediaId > Media->MediaId)
+ Media->MediaId = ++CurrentMediaId;
+ else
+ CurrentMediaId = Media->MediaId;
Media->ReadOnly = MmcHostInstance->CardInfo.CSDData.PERM_WRITE_PROTECT;
Media->LogicalBlocksPerPhysicalBlock = 1;
Media->IoAlign = 4;
@@ -344,7 +349,7 @@ InitializeSdMmcDevice (
MmcHostInstance->BlockIo.Media->BlockSize = BlockSize;
MmcHostInstance->BlockIo.Media->ReadOnly = MmcHost->IsReadOnly (MmcHost);
MmcHostInstance->BlockIo.Media->MediaPresent = TRUE;
- MmcHostInstance->BlockIo.Media->MediaId++;
+ MmcHostInstance->BlockIo.Media->MediaId = ++CurrentMediaId;
CmdArg = MmcHostInstance->CardInfo.RCA << 16;
Status = MmcHost->SendCommand (MmcHost, MMC_CMD7, CmdArg);
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 08/10] MmcDxe: set iospeed and bus width in SD stack
2016-09-21 15:02 [PATCH v3 00/10] enhance mmc Haojian Zhuang
` (6 preceding siblings ...)
2016-09-21 15:02 ` [PATCH v3 07/10] MmcDxe: Fix uninitialized mediaid for SD Haojian Zhuang
@ 2016-09-21 15:02 ` Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 09/10] MmcDxe: expand to support multiple blocks Haojian Zhuang
` (2 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: Haojian Zhuang @ 2016-09-21 15:02 UTC (permalink / raw)
To: ryan.harkin, edk2-devel, leif.lindholm, ard.biesheuvel; +Cc: Haojian Zhuang
Add more SD commands to support 4-bit bus width & iospeed. It's not
formal code. And it needs to be updated later.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
EmbeddedPkg/Include/Protocol/MmcHost.h | 3 +
EmbeddedPkg/Universal/MmcDxe/Mmc.h | 17 +++
EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 138 ++++++++++++++++++++---
3 files changed, 142 insertions(+), 16 deletions(-)
diff --git a/EmbeddedPkg/Include/Protocol/MmcHost.h b/EmbeddedPkg/Include/Protocol/MmcHost.h
index 5e3a2b7..e9a74f0 100644
--- a/EmbeddedPkg/Include/Protocol/MmcHost.h
+++ b/EmbeddedPkg/Include/Protocol/MmcHost.h
@@ -64,11 +64,14 @@ typedef UINT32 MMC_CMD;
#define MMC_CMD24 (MMC_INDX(24) | MMC_CMD_WAIT_RESPONSE)
#define MMC_CMD55 (MMC_INDX(55) | MMC_CMD_WAIT_RESPONSE)
#define MMC_ACMD41 (MMC_INDX(41) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_NO_CRC_RESPONSE)
+#define MMC_ACMD51 (MMC_INDX(51) | MMC_CMD_WAIT_RESPONSE)
// Valid responses for CMD1 in eMMC
#define EMMC_CMD1_CAPACITY_LESS_THAN_2GB 0x00FF8080 // Capacity <= 2GB, byte addressing used
#define EMMC_CMD1_CAPACITY_GREATER_THAN_2GB 0x40FF8080 // Capacity > 2GB, 512-byte sector addressing used
+#define MMC_STATUS_APP_CMD (1 << 5)
+
typedef enum _MMC_STATE {
MmcInvalidState = 0,
MmcHwInitializationState,
diff --git a/EmbeddedPkg/Universal/MmcDxe/Mmc.h b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
index 0ccbc80..a62ba32 100644
--- a/EmbeddedPkg/Universal/MmcDxe/Mmc.h
+++ b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
@@ -75,6 +75,23 @@ typedef struct {
UINT32 PowerUp: 1; // This bit is set to LOW if the card has not finished the power up routine
} OCR;
+/* For little endian CPU */
+typedef struct {
+ UINT8 SD_SPEC: 4; // SD Memory Card - Spec. Version [59:56]
+ UINT8 SCR_STRUCTURE: 4; // SCR Structure [63:60]
+ UINT8 SD_BUS_WIDTHS: 4; // DAT Bus widths supported [51:48]
+ UINT8 DATA_STAT_AFTER_ERASE: 1; // Data Status after erases [55]
+ UINT8 SD_SECURITY: 3; // CPRM Security Support [54:52]
+ UINT8 EX_SECURITY_1: 1; // Extended Security Support [43]
+ UINT8 SD_SPEC4: 1; // Spec. Version 4.00 or higher [42]
+ UINT8 RESERVED_1: 2; // Reserved [41:40]
+ UINT8 SD_SPEC3: 1; // Spec. Version 3.00 or higher [47]
+ UINT8 EX_SECURITY_2: 3; // Extended Security Support [46:44]
+ UINT8 CMD_SUPPORT: 4; // Command Support bits [35:32]
+ UINT8 RESERVED_2: 4; // Reserved [39:36]
+ UINT32 RESERVED_3; // Manufacturer Usage [31:0]
+} SCR;
+
typedef struct {
UINT32 NOT_USED; // 1 [0:0]
UINT32 CRC; // CRC7 checksum [7:1]
diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
index f806bfc..125d3f9 100644
--- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
+++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
@@ -12,6 +12,9 @@
*
**/
+#include <Library/BaseMemoryLib.h>
+#include <Library/TimerLib.h>
+
#include "Mmc.h"
typedef union {
@@ -41,6 +44,11 @@ typedef union {
#define EMMC_SWITCH_ERROR (1 << 7)
+#define SD_BUS_WIDTH_1BIT (1 << 0)
+#define SD_BUS_WIDTH_4BIT (1 << 2)
+
+#define SD_CCC_SWITCH (1 << 10)
+
#define DEVICE_STATE(x) (((x) >> 9) & 0xf)
typedef enum _EMMC_DEVICE_STATE {
EMMC_IDLE_STATE = 0,
@@ -69,28 +77,30 @@ EmmcGetDeviceState (
{
EFI_MMC_HOST_PROTOCOL *Host;
EFI_STATUS Status;
- UINT32 Data, RCA;
+ UINT32 Rsp[4], RCA;
if (State == NULL)
return EFI_INVALID_PARAMETER;
Host = MmcHostInstance->MmcHost;
RCA = MmcHostInstance->CardInfo.RCA << RCA_SHIFT_OFFSET;
- Status = Host->SendCommand (Host, MMC_CMD13, RCA);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to get card status, Status=%r.\n", Status));
- return Status;
- }
- Status = Host->ReceiveResponse (Host, MMC_RESPONSE_TYPE_R1, &Data);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to get response of CMD13, Status=%r.\n", Status));
- return Status;
- }
- if (Data & EMMC_SWITCH_ERROR) {
- DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to switch expected mode, Status=%r.\n", Status));
- return EFI_DEVICE_ERROR;
- }
- *State = DEVICE_STATE(Data);
+ do {
+ Status = Host->SendCommand (Host, MMC_CMD13, RCA);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to get card status, Status=%r.\n", Status));
+ return Status;
+ }
+ Status = Host->ReceiveResponse (Host, MMC_RESPONSE_TYPE_R1, Rsp);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to get response of CMD13, Status=%r.\n", Status));
+ return Status;
+ }
+ if (Rsp[0] & EMMC_SWITCH_ERROR) {
+ DEBUG ((EFI_D_ERROR, "EmmcGetDeviceState(): Failed to switch expected mode, Status=%r.\n", Status));
+ return EFI_DEVICE_ERROR;
+ }
+ } while (!(Rsp[0] & MMC_R0_READY_FOR_DATA));
+ *State = MMC_R0_CURRENTSTATE(Rsp);
return EFI_SUCCESS;
}
@@ -305,9 +315,12 @@ InitializeSdMmcDevice (
{
UINT32 CmdArg;
UINT32 Response[4];
+ UINT32 Buffer[128];
UINTN BlockSize;
UINTN CardSize;
UINTN NumBlocks;
+ BOOLEAN CccSwitch;
+ SCR Scr;
EFI_STATUS Status;
EFI_MMC_HOST_PROTOCOL *MmcHost;
@@ -328,6 +341,10 @@ InitializeSdMmcDevice (
return Status;
}
PrintCSD (Response);
+ if (MMC_CSD_GET_CCC(Response) & SD_CCC_SWITCH)
+ CccSwitch = TRUE;
+ else
+ CccSwitch = FALSE;
if (MmcHostInstance->CardInfo.CardType == SD_CARD_2_HIGH) {
CardSize = HC_MMC_CSD_GET_DEVICESIZE (Response);
@@ -358,6 +375,95 @@ InitializeSdMmcDevice (
return Status;
}
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD55, CmdArg);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a(MMC_CMD55): Error and Status = %r\n", Status));
+ return Status;
+ }
+ Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a(MMC_CMD55): Error and Status = %r\n", Status));
+ return Status;
+ }
+ if ((Response[0] & MMC_STATUS_APP_CMD) == 0)
+ return EFI_SUCCESS;
+
+ /* SCR */
+ Status = MmcHost->SendCommand (MmcHost, MMC_ACMD51, 0);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a(MMC_ACMD51): Error and Status = %r\n", __func__, Status));
+ return Status;
+ } else {
+ Status = MmcHost->ReadBlockData (MmcHost, 0, 8, Buffer);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a(MMC_ACMD51): ReadBlockData Error and Status = %r\n", __func__, Status));
+ return Status;
+ }
+ CopyMem (&Scr, Buffer, 8);
+ if (Scr.SD_SPEC == 2) {
+ if (Scr.SD_SPEC3 == 1) {
+ if (Scr.SD_SPEC4 == 1) {
+ DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 4.xx\n"));
+ } else {
+ DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 3.0x\n"));
+ }
+ } else {
+ if (Scr.SD_SPEC4 == 0) {
+ DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 2.0\n"));
+ } else {
+ DEBUG ((EFI_D_ERROR, "Found invalid SD Card\n"));
+ }
+ }
+ } else {
+ if ((Scr.SD_SPEC3 == 0) && (Scr.SD_SPEC4 == 0)) {
+ if (Scr.SD_SPEC == 1) {
+ DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 1.10\n"));
+ } else {
+ DEBUG ((EFI_D_INFO, "Found SD Card for Spec Version 1.0\n"));
+ }
+ } else {
+ DEBUG ((EFI_D_ERROR, "Found invalid SD Card\n"));
+ }
+ }
+ }
+ if (CccSwitch) {
+ /* SD Switch, Mode:1, Group:0, Value:1 */
+ CmdArg = 1 << 31 | 0x00FFFFFF;
+ CmdArg &= ~(0xF << (0 * 4));
+ CmdArg |= 1 << (0 * 4);
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD6, CmdArg);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a(MMC_CMD6): Error and Status = %r\n", Status));
+ return Status;
+ } else {
+ Status = MmcHost->ReadBlockData (MmcHost, 0, 64, Buffer);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a(MMC_CMD6): ReadBlockData Error and Status = %r\n", Status));
+ return Status;
+ }
+ }
+ }
+ if (Scr.SD_BUS_WIDTHS & SD_BUS_WIDTH_4BIT) {
+ CmdArg = MmcHostInstance->CardInfo.RCA << 16;
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD55, CmdArg);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a(MMC_CMD55): Error and Status = %r\n", Status));
+ return Status;
+ }
+ /* Width: 4 */
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD6, 2);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a(MMC_CMD6): Error and Status = %r\n", Status));
+ return Status;
+ }
+ }
+ if (MmcHost->SetIos) {
+ Status = MmcHost->SetIos (MmcHost, 24 * 1000 * 1000, 4, EMMCBACKWARD);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a(SetIos): Error and Status = %r\n", Status));
+ return Status;
+ }
+ }
return EFI_SUCCESS;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 09/10] MmcDxe: expand to support multiple blocks
2016-09-21 15:02 [PATCH v3 00/10] enhance mmc Haojian Zhuang
` (7 preceding siblings ...)
2016-09-21 15:02 ` [PATCH v3 08/10] MmcDxe: set iospeed and bus width in SD stack Haojian Zhuang
@ 2016-09-21 15:02 ` Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 10/10] PL180: update for indentifying SD Haojian Zhuang
2016-10-11 16:22 ` [PATCH v3 00/10] enhance mmc Ryan Harkin
10 siblings, 0 replies; 18+ messages in thread
From: Haojian Zhuang @ 2016-09-21 15:02 UTC (permalink / raw)
To: ryan.harkin, edk2-devel, leif.lindholm, ard.biesheuvel; +Cc: Haojian Zhuang
Make use of DMA to transfer multiple blocks at one time. It could
improve the performance on MMC/SD driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
EmbeddedPkg/Include/Protocol/MmcHost.h | 6 +
EmbeddedPkg/Universal/MmcDxe/MmcBlockIo.c | 175 ++++++++++++++++++++----------
2 files changed, 122 insertions(+), 59 deletions(-)
diff --git a/EmbeddedPkg/Include/Protocol/MmcHost.h b/EmbeddedPkg/Include/Protocol/MmcHost.h
index e9a74f0..62501a0 100644
--- a/EmbeddedPkg/Include/Protocol/MmcHost.h
+++ b/EmbeddedPkg/Include/Protocol/MmcHost.h
@@ -62,6 +62,7 @@ typedef UINT32 MMC_CMD;
#define MMC_CMD20 (MMC_INDX(20) | MMC_CMD_WAIT_RESPONSE)
#define MMC_CMD23 (MMC_INDX(23) | MMC_CMD_WAIT_RESPONSE)
#define MMC_CMD24 (MMC_INDX(24) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD25 (MMC_INDX(25) | MMC_CMD_WAIT_RESPONSE)
#define MMC_CMD55 (MMC_INDX(55) | MMC_CMD_WAIT_RESPONSE)
#define MMC_ACMD41 (MMC_INDX(41) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_NO_CRC_RESPONSE)
#define MMC_ACMD51 (MMC_INDX(51) | MMC_CMD_WAIT_RESPONSE)
@@ -152,6 +153,10 @@ typedef EFI_STATUS (EFIAPI *MMC_SETIOS) (
IN UINT32 TimingMode
);
+typedef BOOLEAN (EFIAPI *MMC_ISMULTIBLOCK) (
+ IN EFI_MMC_HOST_PROTOCOL *This
+ );
+
struct _EFI_MMC_HOST_PROTOCOL {
@@ -169,6 +174,7 @@ struct _EFI_MMC_HOST_PROTOCOL {
MMC_WRITEBLOCKDATA WriteBlockData;
MMC_SETIOS SetIos;
+ MMC_ISMULTIBLOCK IsMultiBlock;
};
diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcBlockIo.c b/EmbeddedPkg/Universal/MmcDxe/MmcBlockIo.c
index 0e1ef57..3bfae08 100644
--- a/EmbeddedPkg/Universal/MmcDxe/MmcBlockIo.c
+++ b/EmbeddedPkg/Universal/MmcDxe/MmcBlockIo.c
@@ -126,6 +126,95 @@ MmcStopTransmission (
#define MMCI0_BLOCKLEN 512
#define MMCI0_TIMEOUT 10000
+STATIC EFI_STATUS
+MmcTransferBlock (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN UINTN Cmd,
+ IN UINTN Transfer,
+ IN UINT32 MediaId,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSize,
+ OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINTN CmdArg;
+ INTN Timeout;
+ UINT32 Response[4];
+ MMC_HOST_INSTANCE *MmcHostInstance;
+ EFI_MMC_HOST_PROTOCOL *MmcHost;
+
+ MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);
+ MmcHost = MmcHostInstance->MmcHost;
+
+ //Set command argument based on the card access mode (Byte mode or Block mode)
+ if (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1) {
+ CmdArg = Lba;
+ } else {
+ CmdArg = Lba * This->Media->BlockSize;
+ }
+
+ Status = MmcHost->SendCommand (MmcHost, Cmd, CmdArg);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a(MMC_CMD%d): Error %r\n", __func__, Cmd, Status));
+ return Status;
+ }
+
+ if (Transfer == MMC_IOBLOCKS_READ) {
+ // Read Data
+ Status = MmcHost->ReadBlockData (MmcHost, Lba, BufferSize, Buffer);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_BLKIO, "%a(): Error Read Block Data and Status = %r\n", __func__, Status));
+ MmcStopTransmission (MmcHost);
+ return Status;
+ }
+ Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a() : Error MmcProgrammingState\n", __func__));
+ return Status;
+ }
+ } else {
+ // Write Data
+ Status = MmcHost->WriteBlockData (MmcHost, Lba, BufferSize, Buffer);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_BLKIO, "%a(): Error Write Block Data and Status = %r\n", __func__, Status));
+ MmcStopTransmission (MmcHost);
+ return Status;
+ }
+ }
+
+ // Command 13 - Read status and wait for programming to complete (return to tran)
+ Timeout = MMCI0_TIMEOUT;
+ CmdArg = MmcHostInstance->CardInfo.RCA << 16;
+ Response[0] = 0;
+ while( (!(Response[0] & MMC_R0_READY_FOR_DATA))
+ && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)
+ && Timeout--) {
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);
+ if (!EFI_ERROR (Status)) {
+ MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
+ if ((Response[0] & MMC_R0_READY_FOR_DATA)) {
+ break; // Prevents delay once finished
+ }
+ }
+ gBS->Stall (1);
+ }
+
+ if (BufferSize > This->Media->BlockSize) {
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD12, 0);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_BLKIO, "%a(): Error and Status:%r\n", __func__, Status));
+ }
+ }
+
+ Status = MmcNotifyState (MmcHostInstance, MmcTransferState);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcTransferState\n"));
+ return Status;
+ }
+ return Status;
+}
+
EFI_STATUS
MmcIoBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
@@ -145,6 +234,7 @@ MmcIoBlocks (
EFI_MMC_HOST_PROTOCOL *MmcHost;
UINTN BytesRemainingToBeTransfered;
UINTN BlockCount;
+ UINTN ConsumeSize;
BlockCount = 1;
MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);
@@ -165,6 +255,10 @@ MmcIoBlocks (
return EFI_NO_MEDIA;
}
+ if (MmcHost->IsMultiBlock && MmcHost->IsMultiBlock(MmcHost)) {
+ BlockCount = (BufferSize + This->Media->BlockSize - 1) / This->Media->BlockSize;
+ }
+
// All blocks must be within the device
if ((Lba + (BufferSize / This->Media->BlockSize)) > (This->Media->LastBlock + 1)) {
return EFI_INVALID_PARAMETER;
@@ -210,75 +304,38 @@ MmcIoBlocks (
return EFI_NOT_READY;
}
- //Set command argument based on the card access mode (Byte mode or Block mode)
- if (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1) {
- CmdArg = Lba;
- } else {
- CmdArg = Lba * This->Media->BlockSize;
- }
-
- if (Transfer == MMC_IOBLOCKS_READ) {
- // Read a single block
- Cmd = MMC_CMD17;
- } else {
- // Write a single block
- Cmd = MMC_CMD24;
- }
- Status = MmcHost->SendCommand (MmcHost, Cmd, CmdArg);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "MmcIoBlocks(MMC_CMD%d): Error %r\n", Cmd, Status));
- return Status;
- }
-
if (Transfer == MMC_IOBLOCKS_READ) {
- // Read one block of Data
- Status = MmcHost->ReadBlockData (MmcHost, Lba, This->Media->BlockSize, Buffer);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_BLKIO, "MmcIoBlocks(): Error Read Block Data and Status = %r\n", Status));
- MmcStopTransmission (MmcHost);
- return Status;
- }
- Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcProgrammingState\n"));
- return Status;
+ if (BlockCount == 1) {
+ // Read a single block
+ Cmd = MMC_CMD17;
+ } else {
+ // Read multiple blocks
+ Cmd = MMC_CMD18;
}
} else {
- // Write one block of Data
- Status = MmcHost->WriteBlockData (MmcHost, Lba, This->Media->BlockSize, Buffer);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_BLKIO, "MmcIoBlocks(): Error Write Block Data and Status = %r\n", Status));
- MmcStopTransmission (MmcHost);
- return Status;
+ if (BlockCount == 1) {
+ // Write a single block
+ Cmd = MMC_CMD24;
+ } else {
+ // Write multiple blocks
+ Cmd = MMC_CMD25;
}
}
- // Command 13 - Read status and wait for programming to complete (return to tran)
- Timeout = MMCI0_TIMEOUT;
- CmdArg = MmcHostInstance->CardInfo.RCA << 16;
- Response[0] = 0;
- while( (!(Response[0] & MMC_R0_READY_FOR_DATA))
- && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)
- && Timeout--) {
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);
- if (!EFI_ERROR (Status)) {
- MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
- if ((Response[0] & MMC_R0_READY_FOR_DATA)) {
- break; // Prevents delay once finished
- }
- }
- gBS->Stall (1);
+ ConsumeSize = BlockCount * This->Media->BlockSize;
+ if (BytesRemainingToBeTransfered < ConsumeSize) {
+ ConsumeSize = BytesRemainingToBeTransfered;
}
-
- Status = MmcNotifyState (MmcHostInstance, MmcTransferState);
+ Status = MmcTransferBlock (This, Cmd, Transfer, MediaId, Lba, ConsumeSize, Buffer);
if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcTransferState\n"));
- return Status;
+ DEBUG ((EFI_D_ERROR, "%a(): Failed to transfer block and Status:%r\n", __func__, Status));
}
- BytesRemainingToBeTransfered -= This->Media->BlockSize;
- Lba += BlockCount;
- Buffer = (UINT8 *)Buffer + This->Media->BlockSize;
+ BytesRemainingToBeTransfered -= ConsumeSize;
+ if (BytesRemainingToBeTransfered > 0) {
+ Lba += BlockCount;
+ Buffer = (UINT8 *)Buffer + ConsumeSize;
+ }
}
return EFI_SUCCESS;
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v3 10/10] PL180: update for indentifying SD
2016-09-21 15:02 [PATCH v3 00/10] enhance mmc Haojian Zhuang
` (8 preceding siblings ...)
2016-09-21 15:02 ` [PATCH v3 09/10] MmcDxe: expand to support multiple blocks Haojian Zhuang
@ 2016-09-21 15:02 ` Haojian Zhuang
2016-10-11 16:22 ` [PATCH v3 00/10] enhance mmc Ryan Harkin
10 siblings, 0 replies; 18+ messages in thread
From: Haojian Zhuang @ 2016-09-21 15:02 UTC (permalink / raw)
To: ryan.harkin, edk2-devel, leif.lindholm, ard.biesheuvel; +Cc: Haojian Zhuang
When CMD6 & ACMD51 are added into indentifying SD process, PL180
should also support CMD6 & ACMD51. Otherwise, it'll hang when
system tries to read expected data.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
ArmPlatformPkg/Drivers/PL180MciDxe/PL180Mci.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/ArmPlatformPkg/Drivers/PL180MciDxe/PL180Mci.c b/ArmPlatformPkg/Drivers/PL180MciDxe/PL180Mci.c
index 5526aac..7647608 100644
--- a/ArmPlatformPkg/Drivers/PL180MciDxe/PL180Mci.c
+++ b/ArmPlatformPkg/Drivers/PL180MciDxe/PL180Mci.c
@@ -126,6 +126,15 @@ MciSendCommand (
MciPrepareDataPath (MCI_DATACTL_CARD_TO_CONT);
} else if ((MmcCmd == MMC_CMD24) || (MmcCmd == MMC_CMD20)) {
MciPrepareDataPath (MCI_DATACTL_CONT_TO_CARD);
+ } else if (MmcCmd == MMC_CMD6) {
+ MmioWrite32 (MCI_DATA_TIMER_REG, 0xFFFFFFF);
+ MmioWrite32 (MCI_DATA_LENGTH_REG, 64);
+ MmioWrite32 (MCI_DATA_CTL_REG, MCI_DATACTL_ENABLE | MCI_DATACTL_CARD_TO_CONT | MCI_DATACTL_STREAM_TRANS);
+ } else if (MmcCmd == MMC_ACMD51) {
+ MmioWrite32 (MCI_DATA_TIMER_REG, 0xFFFFFFF);
+ /* SCR register is 8 bytes long. */
+ MmioWrite32 (MCI_DATA_LENGTH_REG, 8);
+ MmioWrite32 (MCI_DATA_CTL_REG, MCI_DATACTL_ENABLE | MCI_DATACTL_CARD_TO_CONT | MCI_DATACTL_STREAM_TRANS);
}
// Create Command for PL180
@@ -223,7 +232,11 @@ MciReadBlockData (
// Read data from the RX FIFO
Loop = 0;
- Finish = MMCI0_BLOCKLEN / 4;
+ if (Length < MMCI0_BLOCKLEN) {
+ Finish = Length / 4;
+ } else {
+ Finish = MMCI0_BLOCKLEN / 4;
+ }
// Raise the TPL at the highest level to disable Interrupts.
Tpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH v3 00/10] enhance mmc
2016-09-21 15:02 [PATCH v3 00/10] enhance mmc Haojian Zhuang
` (9 preceding siblings ...)
2016-09-21 15:02 ` [PATCH v3 10/10] PL180: update for indentifying SD Haojian Zhuang
@ 2016-10-11 16:22 ` Ryan Harkin
2016-10-11 16:24 ` Ard Biesheuvel
10 siblings, 1 reply; 18+ messages in thread
From: Ryan Harkin @ 2016-10-11 16:22 UTC (permalink / raw)
To: Haojian Zhuang; +Cc: edk2-devel-01, Leif Lindholm, Ard Biesheuvel
Hi Haojian,
So I've tested this v3 patchset and while it's much improved, I still
get hangs on TC2.
The good news, MMC identification and driver initialisation succeeds
in this version and the board boots a bit further.
Unfortunately, with a RELEASE build, the board hangs at a later point:
when the BDS starts, I think. But only with RELEASE builds; DEBUG is
OK.
I can repeatedly add/revert your patchset and the board will either
hang/boot each time.
I based my work on pure upstream EDK2 and added your patches:
da936c2 2016-09-21 PL180: update for indentifying SD [Haojian Zhuang]
242542a 2016-09-21 MmcDxe: expand to support multiple blocks
[Haojian Zhuang]
73636cc 2016-09-21 MmcDxe: set iospeed and bus width in SD stack
[Haojian Zhuang]
7f54eea 2016-09-21 MmcDxe: Fix uninitialized mediaid for SD
[Haojian Zhuang]
ef46f04 2016-09-21 MmcDxe: set io bus width before reading EXTCSD
[Haojian Zhuang]
e21926e 2016-09-21 MmcDxe: declare ECSD structure [Haojian Zhuang]
f0e0fd9 2016-09-21 MmcDxe: add interface to change io width and
speed [Haojian Zhuang]
09ef3f1 2016-09-21 MmcDxe: add SPEC_VERS field in CSD structure
[Haojian Zhuang]
4677114 2016-09-21 MmcDxe: move ECSD into CardInfo structure
[Haojian Zhuang]
7e1d256 2016-09-21 MmcDxe: wait OCR busy bit free [Haojian Zhuang]
b3b58d4 2016-09-28 PcAtChipsetPkg AcpiTimerLib: Clear bits [31:24]
after reading by IoRead32() [Star Zeng]
And OpenPlatformPkg was taken from my repo, which only carries one
patch essential for TC2 booting:
c22a665 2016-01-29 HACK: Platforms/ARM: TC2: set
gArmTokenSpaceGuid.PcdNormalMemoryNonshareableOverride TRUE [Ryan
Harkin]
ad932f0 2016-08-25 Platforms/ARM/Juno: Add support for ACPI 6.0
LPI(Low Power Idle) states [Sudeep Holla]
I've pushed both to my repos with the tag "mmc-v3-001"
https://git.linaro.org/landing-teams/working/arm/edk2.git/shortlog/refs/tags/mmc-v3-001
https://git.linaro.org/landing-teams/working/arm/OpenPlatformPkg.git/shortlog/refs/tags/mmc-v3-001
If I use pure upstream tianocore at commit b3b58d4 along with my
OpenPlatformPkg at the "mmc-v3-001" tag, then the board doesn't hang
on boot in a RELEASE build.
Cheers,
Ryan.
On 21 September 2016 at 16:02, Haojian Zhuang <haojian.zhuang@linaro.org> wrote:
> v3:
> * Fix PL180 hang because of CMD6 & ACMD51 not supported.
>
> v2:
> * Fix print error with missing parameter.
> * Change CMD51 to ACMD51.
> * Add the protection after CMD55 for SD. If there's no
> response of CMD55, skip to send ACMD51.
>
> v1:
> * Wait OCR busy bit free according to eMMC spec.
> * Define ECSD structure.
> * Add interface to set IO bus width and speed.
> * Support to access multiple blocks.
>
> Haojian Zhuang (10):
> MmcDxe: wait OCR busy bit free
> MmcDxe: move ECSD into CardInfo structure
> MmcDxe: add SPEC_VERS field in CSD structure
> MmcDxe: add interface to change io width and speed
> MmcDxe: declare ECSD structure
> MmcDxe: set io bus width before reading EXTCSD
> MmcDxe: Fix uninitialized mediaid for SD
> MmcDxe: set iospeed and bus width in SD stack
> MmcDxe: expand to support multiple blocks
> PL180: update for indentifying SD
>
> ArmPlatformPkg/Drivers/PL180MciDxe/PL180Mci.c | 15 +-
> EmbeddedPkg/Include/Protocol/MmcHost.h | 29 ++
> EmbeddedPkg/Universal/MmcDxe/Mmc.h | 176 +++++++++++-
> EmbeddedPkg/Universal/MmcDxe/MmcBlockIo.c | 175 ++++++++----
> EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 350 +++++++++++++++++++++--
> 5 files changed, 659 insertions(+), 86 deletions(-)
>
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 00/10] enhance mmc
2016-10-11 16:22 ` [PATCH v3 00/10] enhance mmc Ryan Harkin
@ 2016-10-11 16:24 ` Ard Biesheuvel
2016-10-11 16:27 ` Ryan Harkin
0 siblings, 1 reply; 18+ messages in thread
From: Ard Biesheuvel @ 2016-10-11 16:24 UTC (permalink / raw)
To: Ryan Harkin; +Cc: Haojian Zhuang, edk2-devel-01, Leif Lindholm
Hi Ryan,
On 11 October 2016 at 17:22, Ryan Harkin <ryan.harkin@linaro.org> wrote:
[...]
> And OpenPlatformPkg was taken from my repo, which only carries one
> patch essential for TC2 booting:
> c22a665 2016-01-29 HACK: Platforms/ARM: TC2: set
> gArmTokenSpaceGuid.PcdNormalMemoryNonshareableOverride TRUE [Ryan
> Harkin]
Shouldn't we simply merge that patch?
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 00/10] enhance mmc
2016-10-11 16:24 ` Ard Biesheuvel
@ 2016-10-11 16:27 ` Ryan Harkin
2016-10-11 16:28 ` Ard Biesheuvel
0 siblings, 1 reply; 18+ messages in thread
From: Ryan Harkin @ 2016-10-11 16:27 UTC (permalink / raw)
To: Ard Biesheuvel; +Cc: Haojian Zhuang, edk2-devel-01, Leif Lindholm
On 11 October 2016 at 17:24, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
> Hi Ryan,
>
> On 11 October 2016 at 17:22, Ryan Harkin <ryan.harkin@linaro.org> wrote:
> [...]
>> And OpenPlatformPkg was taken from my repo, which only carries one
>> patch essential for TC2 booting:
>> c22a665 2016-01-29 HACK: Platforms/ARM: TC2: set
>> gArmTokenSpaceGuid.PcdNormalMemoryNonshareableOverride TRUE [Ryan
>> Harkin]
>
> Shouldn't we simply merge that patch?
I think Leif said no, back when TC2 broken in mainline.
The commit that broke it was 0c9a522f28772049ae37c85b8ae589a98d2d3b81
"ArmPkg/ArmLib: mark all cached mappings as (inner) shareable". IIRC
Leif said there is something wrong with the TC2 setup code meaning
that we need to set the PCD, even though we shouldn't need to.
And I've never had time to work it out, so I've just carried the patch.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 00/10] enhance mmc
2016-10-11 16:27 ` Ryan Harkin
@ 2016-10-11 16:28 ` Ard Biesheuvel
2016-10-11 17:03 ` Ryan Harkin
0 siblings, 1 reply; 18+ messages in thread
From: Ard Biesheuvel @ 2016-10-11 16:28 UTC (permalink / raw)
To: Ryan Harkin; +Cc: Haojian Zhuang, edk2-devel-01, Leif Lindholm
On 11 October 2016 at 17:27, Ryan Harkin <ryan.harkin@linaro.org> wrote:
> On 11 October 2016 at 17:24, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
>> Hi Ryan,
>>
>> On 11 October 2016 at 17:22, Ryan Harkin <ryan.harkin@linaro.org> wrote:
>> [...]
>>> And OpenPlatformPkg was taken from my repo, which only carries one
>>> patch essential for TC2 booting:
>>> c22a665 2016-01-29 HACK: Platforms/ARM: TC2: set
>>> gArmTokenSpaceGuid.PcdNormalMemoryNonshareableOverride TRUE [Ryan
>>> Harkin]
>>
>> Shouldn't we simply merge that patch?
>
> I think Leif said no, back when TC2 broken in mainline.
>
> The commit that broke it was 0c9a522f28772049ae37c85b8ae589a98d2d3b81
> "ArmPkg/ArmLib: mark all cached mappings as (inner) shareable". IIRC
> Leif said there is something wrong with the TC2 setup code meaning
> that we need to set the PCD, even though we shouldn't need to.
>
> And I've never had time to work it out, so I've just carried the patch.
Ah right, I remember now.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 00/10] enhance mmc
2016-10-11 16:28 ` Ard Biesheuvel
@ 2016-10-11 17:03 ` Ryan Harkin
2016-10-11 23:33 ` Haojian Zhuang
0 siblings, 1 reply; 18+ messages in thread
From: Ryan Harkin @ 2016-10-11 17:03 UTC (permalink / raw)
To: Ard Biesheuvel; +Cc: Haojian Zhuang, edk2-devel-01, Leif Lindholm
On 11 October 2016 at 17:28, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
> On 11 October 2016 at 17:27, Ryan Harkin <ryan.harkin@linaro.org> wrote:
>> On 11 October 2016 at 17:24, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
>>> Hi Ryan,
>>>
>>> On 11 October 2016 at 17:22, Ryan Harkin <ryan.harkin@linaro.org> wrote:
>>> [...]
>>>> And OpenPlatformPkg was taken from my repo, which only carries one
>>>> patch essential for TC2 booting:
>>>> c22a665 2016-01-29 HACK: Platforms/ARM: TC2: set
>>>> gArmTokenSpaceGuid.PcdNormalMemoryNonshareableOverride TRUE [Ryan
>>>> Harkin]
>>>
>>> Shouldn't we simply merge that patch?
>>
>> I think Leif said no, back when TC2 broken in mainline.
>>
>> The commit that broke it was 0c9a522f28772049ae37c85b8ae589a98d2d3b81
>> "ArmPkg/ArmLib: mark all cached mappings as (inner) shareable". IIRC
>> Leif said there is something wrong with the TC2 setup code meaning
>> that we need to set the PCD, even though we shouldn't need to.
>>
>> And I've never had time to work it out, so I've just carried the patch.
>
> Ah right, I remember now.
And if I'd looked further down my HACK commit, I'd have seen this text
explaining what happened:
However, the topic was discussed on the mailing list:
https://www.mail-archive.com/edk2-devel@lists.01.org/msg03974.html
The correct solution for platforms that wish to revert this behaviour
is to set the following PCD to TRUE:
gArmTokenSpaceGuid.PcdNormalMemoryNonshareableOverride
However, for TC2 should not need to do this. Work continues to
ascertain why TC2 breaks with shareable mappings. Current thinking is
that CCI-400 needs configuring before shareable mappings will work.
:-)
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 00/10] enhance mmc
2016-10-11 17:03 ` Ryan Harkin
@ 2016-10-11 23:33 ` Haojian Zhuang
2016-10-12 5:32 ` Ryan Harkin
0 siblings, 1 reply; 18+ messages in thread
From: Haojian Zhuang @ 2016-10-11 23:33 UTC (permalink / raw)
To: Ryan Harkin; +Cc: Ard Biesheuvel, edk2-devel-01, Leif Lindholm
On 12 October 2016 at 01:03, Ryan Harkin <ryan.harkin@linaro.org> wrote:
> On 11 October 2016 at 17:28, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
>> On 11 October 2016 at 17:27, Ryan Harkin <ryan.harkin@linaro.org> wrote:
>>> On 11 October 2016 at 17:24, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
>>>> Hi Ryan,
>>>>
>>>> On 11 October 2016 at 17:22, Ryan Harkin <ryan.harkin@linaro.org> wrote:
>>>> [...]
>>>>> And OpenPlatformPkg was taken from my repo, which only carries one
>>>>> patch essential for TC2 booting:
>>>>> c22a665 2016-01-29 HACK: Platforms/ARM: TC2: set
>>>>> gArmTokenSpaceGuid.PcdNormalMemoryNonshareableOverride TRUE [Ryan
>>>>> Harkin]
>>>>
>>>> Shouldn't we simply merge that patch?
>>>
>>> I think Leif said no, back when TC2 broken in mainline.
>>>
>>> The commit that broke it was 0c9a522f28772049ae37c85b8ae589a98d2d3b81
>>> "ArmPkg/ArmLib: mark all cached mappings as (inner) shareable". IIRC
>>> Leif said there is something wrong with the TC2 setup code meaning
>>> that we need to set the PCD, even though we shouldn't need to.
>>>
>>> And I've never had time to work it out, so I've just carried the patch.
>>
>> Ah right, I remember now.
>
> And if I'd looked further down my HACK commit, I'd have seen this text
> explaining what happened:
>
> However, the topic was discussed on the mailing list:
>
> https://www.mail-archive.com/edk2-devel@lists.01.org/msg03974.html
>
> The correct solution for platforms that wish to revert this behaviour
> is to set the following PCD to TRUE:
>
> gArmTokenSpaceGuid.PcdNormalMemoryNonshareableOverride
>
> However, for TC2 should not need to do this. Work continues to
> ascertain why TC2 breaks with shareable mappings. Current thinking is
> that CCI-400 needs configuring before shareable mappings will work.
>
> :-)
Hi Ryan,
Does it mean that you'll give the fix configuration of CCI-400 on TC2
in upstream?
Best Regards
Haojian
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 00/10] enhance mmc
2016-10-11 23:33 ` Haojian Zhuang
@ 2016-10-12 5:32 ` Ryan Harkin
0 siblings, 0 replies; 18+ messages in thread
From: Ryan Harkin @ 2016-10-12 5:32 UTC (permalink / raw)
To: Haojian Zhuang; +Cc: Leif Lindholm, edk2-devel-01, Ard Biesheuvel
On 12 Oct 2016 00:33, "Haojian Zhuang" <haojian.zhuang@linaro.org> wrote:
>
> On 12 October 2016 at 01:03, Ryan Harkin <ryan.harkin@linaro.org> wrote:
> > On 11 October 2016 at 17:28, Ard Biesheuvel <ard.biesheuvel@linaro.org>
wrote:
> >> On 11 October 2016 at 17:27, Ryan Harkin <ryan.harkin@linaro.org>
wrote:
> >>> On 11 October 2016 at 17:24, Ard Biesheuvel <ard.biesheuvel@linaro.org>
wrote:
> >>>> Hi Ryan,
> >>>>
> >>>> On 11 October 2016 at 17:22, Ryan Harkin <ryan.harkin@linaro.org>
wrote:
> >>>> [...]
> >>>>> And OpenPlatformPkg was taken from my repo, which only carries one
> >>>>> patch essential for TC2 booting:
> >>>>> c22a665 2016-01-29 HACK: Platforms/ARM: TC2: set
> >>>>> gArmTokenSpaceGuid.PcdNormalMemoryNonshareableOverride TRUE [Ryan
> >>>>> Harkin]
> >>>>
> >>>> Shouldn't we simply merge that patch?
> >>>
> >>> I think Leif said no, back when TC2 broken in mainline.
> >>>
> >>> The commit that broke it was 0c9a522f28772049ae37c85b8ae589a98d2d3b81
> >>> "ArmPkg/ArmLib: mark all cached mappings as (inner) shareable". IIRC
> >>> Leif said there is something wrong with the TC2 setup code meaning
> >>> that we need to set the PCD, even though we shouldn't need to.
> >>>
> >>> And I've never had time to work it out, so I've just carried the
patch.
> >>
> >> Ah right, I remember now.
> >
> > And if I'd looked further down my HACK commit, I'd have seen this text
> > explaining what happened:
> >
> > However, the topic was discussed on the mailing list:
> >
> > https://www.mail-archive.com/edk2-devel@lists.01.org/msg03974.html
> >
> > The correct solution for platforms that wish to revert this
behaviour
> > is to set the following PCD to TRUE:
> >
> > gArmTokenSpaceGuid.PcdNormalMemoryNonshareableOverride
> >
> > However, for TC2 should not need to do this. Work continues to
> > ascertain why TC2 breaks with shareable mappings. Current thinking
is
> > that CCI-400 needs configuring before shareable mappings will work.
> >
> > :-)
>
> Hi Ryan,
>
> Does it mean that you'll give the fix configuration of CCI-400 on TC2
> in upstream?
>
It means I *should* configure it, but I've not looked at it at all and have
no plans to look at it in the near future.
> Best Regards
> Haojian
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2016-10-12 5:32 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-21 15:02 [PATCH v3 00/10] enhance mmc Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 01/10] MmcDxe: wait OCR busy bit free Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 02/10] MmcDxe: move ECSD into CardInfo structure Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 03/10] MmcDxe: add SPEC_VERS field in CSD structure Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 04/10] MmcDxe: add interface to change io width and speed Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 05/10] MmcDxe: declare ECSD structure Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 06/10] MmcDxe: set io bus width before reading EXTCSD Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 07/10] MmcDxe: Fix uninitialized mediaid for SD Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 08/10] MmcDxe: set iospeed and bus width in SD stack Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 09/10] MmcDxe: expand to support multiple blocks Haojian Zhuang
2016-09-21 15:02 ` [PATCH v3 10/10] PL180: update for indentifying SD Haojian Zhuang
2016-10-11 16:22 ` [PATCH v3 00/10] enhance mmc Ryan Harkin
2016-10-11 16:24 ` Ard Biesheuvel
2016-10-11 16:27 ` Ryan Harkin
2016-10-11 16:28 ` Ard Biesheuvel
2016-10-11 17:03 ` Ryan Harkin
2016-10-11 23:33 ` Haojian Zhuang
2016-10-12 5:32 ` Ryan Harkin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox