public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: Star Zeng <star.zeng@intel.com>
To: edk2-devel@lists.01.org
Cc: "Zeng, Star" <star.zeng@intel.com>,
	Jiewen Yao <jiewen.yao@intel.com>,
	Liming Gao <liming.gao@intel.com>,
	Laszlo Ersek <lersek@redhat.com>
Subject: [PATCH V2] PcAtChipsetPkg AcpiTimerLib: Clear bits [31:24] after reading by IoRead32()
Date: Wed, 28 Sep 2016 20:48:30 +0800	[thread overview]
Message-ID: <1475066910-12740-1-git-send-email-star.zeng@intel.com> (raw)

From: "Zeng, Star" <star.zeng@intel.com>

Clear bits [31:24] when reading ACPI timer count by IoRead32(),
also add comments "Note: The library only supports 24Bits ACPI timer" in INF.

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
---
 PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c       | 8 ++++----
 PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.inf | 6 ++++--
 PcAtChipsetPkg/Library/AcpiTimerLib/DxeAcpiTimerLib.inf  | 8 +++++---
 3 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c b/PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c
index 020031e3f4a5..792781a33f3f 100644
--- a/PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c
+++ b/PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c
@@ -162,14 +162,14 @@ InternalAcpiDelay (
     //
     // The target timer count is calculated here
     //
-    Ticks = IoRead32 (Port) + Delay;
+    Ticks = IoBitFieldRead32 (Port, 0, 23) + Delay;
     Delay = BIT22;
     //
     // Wait until time out
     // Delay >= 2^23 could not be handled by this function
     // Timer wrap-arounds are handled correctly by this function
     //
-    while (((Ticks - IoRead32 (Port)) & BIT23) == 0) {
+    while (((Ticks - IoBitFieldRead32 (Port, 0, 23)) & BIT23) == 0) {
       CpuPause ();
     }
   } while (Times-- > 0);
@@ -371,7 +371,7 @@ InternalCalculateTscFrequency (
   // Use 363 * 9861 = 3579543 Hz which is within 2 Hz of ACPI_TIMER_FREQUENCY.
   // 363 counts is a calibration time of 101.4 uS.
   //
-  Ticks = IoRead32 (TimerAddr) + 363;
+  Ticks = IoBitFieldRead32 (TimerAddr, 0, 23) + 363;
 
   StartTSC = AsmReadTsc ();                                         // Get base value for the TSC
   //
@@ -380,7 +380,7 @@ InternalCalculateTscFrequency (
   // When the current ACPI timer value is greater than 'Ticks',
   // the while loop will exit.
   //
-  while (((Ticks - IoRead32 (TimerAddr)) & BIT23) == 0) {
+  while (((Ticks - IoBitFieldRead32 (TimerAddr, 0, 23)) & BIT23) == 0) {
     CpuPause();
   }
   EndTSC = AsmReadTsc ();                                           // TSC value 101.4 us later
diff --git a/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.inf b/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.inf
index 48caebff1354..913fbfe7d30e 100644
--- a/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.inf
+++ b/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.inf
@@ -2,9 +2,11 @@
 #  Base ACPI Timer Library
 #
 #  Provides basic timer support using the ACPI timer hardware.  The performance
-#  counter features are provided by the processors time stamp counter. 
+#  counter features are provided by the processors time stamp counter.
 #
-#  Copyright (c) 2013 - 2015, Intel Corporation. All rights reserved.<BR>
+#  Note: The library only supports 24Bits ACPI timer.
+#
+#  Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>
 #  This program and the accompanying materials
 #  are licensed and made available under the terms and conditions of the BSD License
 #  which accompanies this distribution.  The full text of the license may be found at
diff --git a/PcAtChipsetPkg/Library/AcpiTimerLib/DxeAcpiTimerLib.inf b/PcAtChipsetPkg/Library/AcpiTimerLib/DxeAcpiTimerLib.inf
index 3446c03eda21..33d4970afc57 100644
--- a/PcAtChipsetPkg/Library/AcpiTimerLib/DxeAcpiTimerLib.inf
+++ b/PcAtChipsetPkg/Library/AcpiTimerLib/DxeAcpiTimerLib.inf
@@ -2,9 +2,11 @@
 #  DXE ACPI Timer Library
 #
 #  Provides basic timer support using the ACPI timer hardware.  The performance
-#  counter features are provided by the processors time stamp counter. 
+#  counter features are provided by the processors time stamp counter.
 #
-#  Copyright (c) 2013 - 2015, Intel Corporation. All rights reserved.<BR>
+#  Note: The library only supports 24Bits ACPI timer.
+#
+#  Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>
 #  This program and the accompanying materials
 #  are licensed and made available under the terms and conditions of the BSD License
 #  which accompanies this distribution.  The full text of the license may be found at
@@ -49,4 +51,4 @@ [Pcd]
   gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPciBarRegisterOffset     ## CONSUMES
   gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPortBaseAddress          ## CONSUMES
   gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiPm1TmrOffset               ## CONSUMES
-  gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPortBaseAddressMask      ## CONSUMES
\ No newline at end of file
+  gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPortBaseAddressMask      ## CONSUMES
-- 
2.8.1.windows.1



             reply	other threads:[~2016-09-28 12:48 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-28 12:48 Star Zeng [this message]
2016-09-28 12:55 ` [PATCH V2] PcAtChipsetPkg AcpiTimerLib: Clear bits [31:24] after reading by IoRead32() Laszlo Ersek
2016-09-28 14:58 ` Kinney, Michael D
2016-10-08  6:39   ` Zeng, Star
2016-10-08 19:49     ` Kinney, Michael D
2016-10-09  1:07       ` Zeng, Star

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1475066910-12740-1-git-send-email-star.zeng@intel.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox