From: Bhupesh Sharma <bhupesh.sharma@nxp.com>
To: <edk2-devel@ml01.01.org>
Cc: <linaro-uefi@lists.linaro.org>,
Bhupesh Sharma <bhupesh.sharma@nxp.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [PATCH 1/1] ArmPlatformPkg/ArmTrustZone: Add support for specifying Subregions to be disabled
Date: Fri, 14 Oct 2016 16:22:01 +0530 [thread overview]
Message-ID: <1476442321-30114-1-git-send-email-bhupesh.sharma@nxp.com> (raw)
ARM TZASC-380 IP provides a mechanism to split memory regions being
protected via it into eight equal-sized sub-regions,
with a bit setting allowing the corresponding subregion to be disabled.
Several NXP/FSL SoCs support the TZASC-380 IP block and allow
the DDR connected via the TZASC to be partitioned into regions
having different security settings.
This patch enables this support and can be used for SoCs which
support such partition of DDR regions.
Details of the 'subregion_disable' register can be viewed here:
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0431c/CJABCFHB.html
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@nxp.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
.../Library/ArmVExpressSecLibCTA9x4/CTA9x4Sec.c | 21 ++++++++++++++-------
ArmPlatformPkg/Drivers/ArmTrustZone/ArmTrustZone.c | 5 +++--
2 files changed, 17 insertions(+), 9 deletions(-)
diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibCTA9x4/CTA9x4Sec.c b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibCTA9x4/CTA9x4Sec.c
index 6fa0774..d358d65 100644
--- a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibCTA9x4/CTA9x4Sec.c
+++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressSecLibCTA9x4/CTA9x4Sec.c
@@ -72,18 +72,21 @@ ArmPlatformSecTrustzoneInit (
// NOR Flash 0 non secure (BootMon)
TZASCSetRegion(ARM_VE_TZASC_BASE,1,TZASC_REGION_ENABLED,
ARM_VE_SMB_NOR0_BASE,0,
- TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW);
+ TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW,
+ 0);
// NOR Flash 1. The first half of the NOR Flash1 must be secure for the secure firmware (sec_uefi.bin)
if (PcdGetBool (PcdTrustzoneSupport) == TRUE) {
//Note: Your OS Kernel must be aware of the secure regions before to enable this region
TZASCSetRegion(ARM_VE_TZASC_BASE,2,TZASC_REGION_ENABLED,
ARM_VE_SMB_NOR1_BASE + SIZE_32MB,0,
- TZASC_REGION_SIZE_32MB, TZASC_REGION_SECURITY_NSRW);
+ TZASC_REGION_SIZE_32MB, TZASC_REGION_SECURITY_NSRW,
+ 0);
} else {
TZASCSetRegion(ARM_VE_TZASC_BASE,2,TZASC_REGION_ENABLED,
ARM_VE_SMB_NOR1_BASE,0,
- TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW);
+ TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW,
+ 0);
}
// Base of SRAM. Only half of SRAM in Non Secure world
@@ -92,22 +95,26 @@ ArmPlatformSecTrustzoneInit (
//Note: Your OS Kernel must be aware of the secure regions before to enable this region
TZASCSetRegion(ARM_VE_TZASC_BASE,3,TZASC_REGION_ENABLED,
ARM_VE_SMB_SRAM_BASE,0,
- TZASC_REGION_SIZE_16MB, TZASC_REGION_SECURITY_NSRW);
+ TZASC_REGION_SIZE_16MB, TZASC_REGION_SECURITY_NSRW,
+ 0);
} else {
TZASCSetRegion(ARM_VE_TZASC_BASE,3,TZASC_REGION_ENABLED,
ARM_VE_SMB_SRAM_BASE,0,
- TZASC_REGION_SIZE_32MB, TZASC_REGION_SECURITY_NSRW);
+ TZASC_REGION_SIZE_32MB, TZASC_REGION_SECURITY_NSRW,
+ 0);
}
// Memory Mapped Peripherals. All in non secure world
TZASCSetRegion(ARM_VE_TZASC_BASE,4,TZASC_REGION_ENABLED,
ARM_VE_SMB_PERIPH_BASE,0,
- TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW);
+ TZASC_REGION_SIZE_64MB, TZASC_REGION_SECURITY_NSRW,
+ 0);
// MotherBoard Peripherals and On-chip peripherals.
TZASCSetRegion(ARM_VE_TZASC_BASE,5,TZASC_REGION_ENABLED,
ARM_VE_SMB_MB_ON_CHIP_PERIPH_BASE,0,
- TZASC_REGION_SIZE_256MB, TZASC_REGION_SECURITY_NSRW);
+ TZASC_REGION_SIZE_256MB, TZASC_REGION_SECURITY_NSRW,
+ 0);
}
/**
diff --git a/ArmPlatformPkg/Drivers/ArmTrustZone/ArmTrustZone.c b/ArmPlatformPkg/Drivers/ArmTrustZone/ArmTrustZone.c
index 070c0dc..5cd41ef 100644
--- a/ArmPlatformPkg/Drivers/ArmTrustZone/ArmTrustZone.c
+++ b/ArmPlatformPkg/Drivers/ArmTrustZone/ArmTrustZone.c
@@ -87,7 +87,8 @@ TZASCSetRegion (
IN UINTN LowAddress,
IN UINTN HighAddress,
IN UINTN Size,
- IN UINTN Security
+ IN UINTN Security,
+ IN UINTN SubregionDisableMask
)
{
UINT32* Region;
@@ -100,7 +101,7 @@ TZASCSetRegion (
MmioWrite32((UINTN)(Region), LowAddress&0xFFFF8000);
MmioWrite32((UINTN)(Region+1), HighAddress);
- MmioWrite32((UINTN)(Region+2), ((Security & 0xF) <<28) | ((Size & 0x3F) << 1) | (Enabled & 0x1));
+ MmioWrite32((UINTN)(Region+2), ((Security & 0xF) <<28) | ((SubregionDisableMask & 0xFF) << 8) | ((Size & 0x3F) << 1) | (Enabled & 0x1));
return EFI_SUCCESS;
}
--
1.9.1
next reply other threads:[~2016-10-14 11:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-14 10:52 Bhupesh Sharma [this message]
2016-10-14 11:21 ` [PATCH 1/1] ArmPlatformPkg/ArmTrustZone: Add support for specifying Subregions to be disabled Bhupesh Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476442321-30114-1-git-send-email-bhupesh.sharma@nxp.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox