public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: Haojian Zhuang <haojian.zhuang@linaro.org>
To: ryan.harkin@linaro.org, edk2-devel@lists.01.org,
	leif.lindholm@linaro.org, ard.biesheuvel@linaro.org
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Subject: [PATCH v5 2/9] MmcDxe: move ECSD into CardInfo structure
Date: Sun, 13 Nov 2016 14:47:51 +0800	[thread overview]
Message-ID: <1479019678-12621-3-git-send-email-haojian.zhuang@linaro.org> (raw)
In-Reply-To: <1479019678-12621-1-git-send-email-haojian.zhuang@linaro.org>

Since ECSD also describes the information of card, move it into
structure CardInfo.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
---
 EmbeddedPkg/Universal/MmcDxe/Mmc.h               | 1 +
 EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 5 ++---
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/EmbeddedPkg/Universal/MmcDxe/Mmc.h b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
index 46a156c..4f132c6 100644
--- a/EmbeddedPkg/Universal/MmcDxe/Mmc.h
+++ b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
@@ -138,6 +138,7 @@ typedef struct  {
   OCR       OCRData;
   CID       CIDData;
   CSD       CSDData;
+  UINT32    ECSD[128];      // MMC V4 extended card specific
 } CARD_INFO;
 
 typedef struct _MMC_HOST_INSTANCE {
diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
index 3f72b7f..578fcb6 100644
--- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
+++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
@@ -39,7 +39,6 @@ EmmcIdentificationMode (
   EFI_BLOCK_IO_MEDIA    *Media;
   EFI_STATUS Status;
   UINT32     RCA;
-  UINT32     ECSD[128];
 
   Host  = MmcHostInstance->MmcHost;
   Media = MmcHostInstance->BlockIo.Media;
@@ -91,7 +90,7 @@ EmmcIdentificationMode (
     DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD fetch error, Status=%r.\n", Status));
   }
 
-  Status = Host->ReadBlockData (Host, 0, 512, ECSD);
+  Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)&(MmcHostInstance->CardInfo.ECSD));
   if (EFI_ERROR (Status)) {
     DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD read error, Status=%r.\n", Status));
     return Status;
@@ -104,7 +103,7 @@ EmmcIdentificationMode (
   Media->LogicalBlocksPerPhysicalBlock = 1;
   Media->IoAlign = 4;
   // Compute last block using bits [215:212] of the ECSD
-  Media->LastBlock = ECSD[EMMC_ECSD_SIZE_OFFSET] - 1; // eMMC isn't supposed to report this for
+  Media->LastBlock = MmcHostInstance->CardInfo.ECSD[EMMC_ECSD_SIZE_OFFSET] - 1; // eMMC isn't supposed to report this for
   // Cards <2GB in size, but the model does.
 
   // Setup card type
-- 
2.7.4



  parent reply	other threads:[~2016-11-13  6:48 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-13  6:47 [PATCH v5 0/9] enhance MMC Haojian Zhuang
2016-11-13  6:47 ` [PATCH v5 1/9] MmcDxe: wait OCR busy bit free Haojian Zhuang
2016-11-13  6:47 ` Haojian Zhuang [this message]
2016-11-13  6:47 ` [PATCH v5 3/9] MmcDxe: declare ECSD structure Haojian Zhuang
2016-11-13  6:47 ` [PATCH v5 4/9] MmcDxe: add SPEC_VERS field in CSD structure Haojian Zhuang
2016-11-13  6:47 ` [PATCH v5 5/9] MmcDxe: add interface to change io width and speed Haojian Zhuang
2016-11-14 16:12   ` Leif Lindholm
2016-11-13  6:47 ` [PATCH v5 6/9] MmcDxe: set io bus width before reading EXTCSD Haojian Zhuang
2016-11-14 16:36   ` Leif Lindholm
2016-11-13  6:47 ` [PATCH v5 7/9] MmcDxe: set iospeed and bus width in SD stack Haojian Zhuang
2016-11-14 17:08   ` Leif Lindholm
2016-11-13  6:47 ` [PATCH v5 8/9] MmcDxe: expand to support multiple blocks Haojian Zhuang
2016-11-14 17:15   ` Leif Lindholm
2016-11-13  6:47 ` [PATCH v5 9/9] PL180: update for indentifying SD Haojian Zhuang
2016-11-14 17:27   ` Leif Lindholm
2016-11-14 15:53 ` [PATCH v5 0/9] enhance MMC Leif Lindholm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1479019678-12621-3-git-send-email-haojian.zhuang@linaro.org \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox