From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from foss.arm.com (foss.arm.com [217.140.101.70]) by ml01.01.org (Postfix) with ESMTP id 9F8F381D36 for ; Mon, 14 Nov 2016 13:10:06 -0800 (PST) Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.72.51.249]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id 0CAA2AD7; Mon, 14 Nov 2016 13:10:11 -0800 (PST) Received: from u200856.usa.arm.com (u201426.usa.arm.com [10.118.28.53]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id 981573F218; Mon, 14 Nov 2016 13:10:10 -0800 (PST) From: Jeremy Linton To: edk2-devel@lists.01.org Cc: linaro-uefi@lists.linaro.org, ryan.harkin@linaro.org, leif.lindholm@linaro.org, steve.capper@arm.com, evan.lloyd@arm.com, daniil.egranov@arm.com, Jeremy Linton Date: Mon, 14 Nov 2016 15:09:41 -0600 Message-Id: <1479157789-14674-1-git-send-email-jeremy.linton@arm.com> X-Mailer: git-send-email 2.5.5 Subject: [PATCH 0/8] ATAPI support on SiI SATA adapter X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 14 Nov 2016 21:10:06 -0000 The SiI isn't an AHCI compatible adapter so it implements the EFI ATA pass-through protocol directly. This works for fixed hard drives, but not ATAPI attached devices (CDROM, DVDROM, TAPE, etc). This patch adds read only ATAPI support via the EFI SCSI pass-through protocol, allowing boot from attached CD/DVD. This patch also cleans up, and tweaks recovery paths/etc in the original driver. When combined with the ARM/PCI dma lib changes this allows us to relax the IO alignment requirement that caused grub failures. Finally, the OpenPlatformPkg/Juno must be updated, with another patch to avoid build breaks now that the SiI has a dependency on the SCSI libraries. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeremy Linton Jeremy Linton (7): MdePkg IndustryStandard/Scsi.h: Add sense code macro EmbeddedPkg: SiI3132: Add ScsiProtocol callbacks EmbeddedPkg: SiI3132: Add SCSI protocol support to header EmbeddedPkg: SiI3132: Break out FIS command submission EmbeddedPkg: SiI3132: Cleanup device node creation EmbeddedPkg: SiI3132: Enable SCSI pass-through protocol EmbeddedPkg: SiI3132: Correct the IoAlign EmbeddedPkg/Drivers/SataSiI3132Dxe/SataSiI3132.c | 48 ++- EmbeddedPkg/Drivers/SataSiI3132Dxe/SataSiI3132.h | 89 ++++- .../Drivers/SataSiI3132Dxe/SataSiI3132Dxe.inf | 2 + .../Drivers/SataSiI3132Dxe/SiI3132AtaPassThru.c | 270 ++++++++------ .../Drivers/SataSiI3132Dxe/SiI3132ScsiPassThru.c | 401 +++++++++++++++++++++ MdePkg/Include/IndustryStandard/Scsi.h | 2 + OpenPlatformPkg | 2 +- 7 files changed, 688 insertions(+), 126 deletions(-) create mode 100644 EmbeddedPkg/Drivers/SataSiI3132Dxe/SiI3132ScsiPassThru.c -- 2.5.5