* [PATCH v2 0/4] PrintLib: Add safe print functions [A|U]ValueToStringS
@ 2017-02-09 6:02 Hao Wu
2017-02-09 6:02 ` [PATCH v2 1/4] MdePkg/BasePrintLib: " Hao Wu
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Hao Wu @ 2017-02-09 6:02 UTC (permalink / raw)
To: edk2-devel; +Cc: Hao Wu, Jiewen Yao, Liming Gao, Michael Kinney
V2 changes:
Add the EFI_PRINT2S_PROTOCOL as a safe version of the EFI_PRINT2_PROTOCOL,
the new protocol replaces the following 2 services in EFI_PRINT2_PROTOCOL:
UNICODE_VALUE_TO_STRING
ASCII_VALUE_TO_STRING
with:
UNICODE_VALUE_TO_STRING_S
ASCII_VALUE_TO_STRING_S
Now, the PrintLib instance MdeModulePkg/Library/DxePrintLibPrint2Protocol
will use EFI_PRINT2S_PROTOCOL instead of EFI_PRINT2_PROTOCOL to implement
its APIs.
V1 history:
Add the following 2 safe print functions in PrintLib:
UnicodeValueToStringS
AsciiValueToStringS
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Hao Wu (4):
MdePkg/BasePrintLib: Add safe print functions [A|U]ValueToStringS
MdeModulePkg: Add the EFI_PRINT2S_PROTOCOL
MdeModulePkg/PrintLib: Use EFI_PRINT2S_PROTOCOL for this instance
MdeModulePkg/PrintLib: Add safe print functions [A|U]ValueToStringS
MdeModulePkg/Include/Protocol/Print2.h | 150 +++++++++++++-
MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.inf | 4 +-
MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.uni | 10 +-
MdeModulePkg/Library/DxePrintLibPrint2Protocol/PrintLib.c | 183 ++++++++++++++++--
MdeModulePkg/MdeModulePkg.dec | 3 +-
MdeModulePkg/Universal/PrintDxe/Print.c | 18 +-
MdeModulePkg/Universal/PrintDxe/PrintDxe.inf | 7 +-
MdeModulePkg/Universal/PrintDxe/PrintDxe.uni | 10 +-
MdePkg/Include/Library/PrintLib.h | 121 ++++++++++++
MdePkg/Library/BasePrintLib/PrintLib.c | 128 ++++++++++++
MdePkg/Library/BasePrintLib/PrintLibInternal.c | 204 ++++++++++++++++++++
MdePkg/Library/BasePrintLib/PrintLibInternal.h | 61 ++++++
12 files changed, 865 insertions(+), 34 deletions(-)
--
1.9.5.msysgit.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/4] MdePkg/BasePrintLib: Add safe print functions [A|U]ValueToStringS
2017-02-09 6:02 [PATCH v2 0/4] PrintLib: Add safe print functions [A|U]ValueToStringS Hao Wu
@ 2017-02-09 6:02 ` Hao Wu
2017-02-09 6:02 ` [PATCH v2 2/4] MdeModulePkg: Add the EFI_PRINT2S_PROTOCOL Hao Wu
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Hao Wu @ 2017-02-09 6:02 UTC (permalink / raw)
To: edk2-devel; +Cc: Hao Wu, Jiewen Yao, Liming Gao, Michael Kinney
Add the following 2 APIs:
UnicodeValueToStringS
AsciiValueToStringS
These safe version APIs are used to enhance their counterpart (APIs
without trailing 'S' in function names).
They perform checks to the input parameters and will return relative
status to reflect the check result.
Return RETURN_INVALID_PARAMETER when:
1). The input Buffer is NULL.
2). The input BufferSize is greater than (PcdMaximumUnicodeStringLength *
sizeof (CHAR16) + 1) for UnicodeValueToStringS or greater than
PcdMaximumAsciiStringLength for AsciiValueToStringS.
3). The input Flags is not set properly.
4). The input Width is not smaller than MAXIMUM_VALUE_CHARACTERS.
Return RETURN_BUFFER_TOO_SMALL when:
1). The input BufferSize cannot hold the converted value.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
---
MdePkg/Include/Library/PrintLib.h | 121 ++++++++++++
MdePkg/Library/BasePrintLib/PrintLib.c | 128 ++++++++++++
MdePkg/Library/BasePrintLib/PrintLibInternal.c | 204 ++++++++++++++++++++
MdePkg/Library/BasePrintLib/PrintLibInternal.h | 61 ++++++
4 files changed, 514 insertions(+)
diff --git a/MdePkg/Include/Library/PrintLib.h b/MdePkg/Include/Library/PrintLib.h
index 5f66323..8c11dab 100644
--- a/MdePkg/Include/Library/PrintLib.h
+++ b/MdePkg/Include/Library/PrintLib.h
@@ -542,6 +542,67 @@ UnicodeValueToString (
);
/**
+ Converts a decimal value to a Null-terminated Unicode string.
+
+ Converts the decimal number specified by Value to a Null-terminated Unicode
+ string specified by Buffer containing at most Width characters. No padding of
+ spaces is ever performed. If Width is 0 then a width of
+ MAXIMUM_VALUE_CHARACTERS is assumed. If the conversion contains more than
+ Width characters, then only the first Width characters are placed in Buffer.
+ Additional conversion parameters are specified in Flags.
+
+ The Flags bit LEFT_JUSTIFY is always ignored.
+ All conversions are left justified in Buffer.
+ If Width is 0, PREFIX_ZERO is ignored in Flags.
+ If COMMA_TYPE is set in Flags, then PREFIX_ZERO is ignored in Flags, and
+ commas are inserted every 3rd digit starting from the right.
+ If RADIX_HEX is set in Flags, then the output buffer will be formatted in
+ hexadecimal format.
+ If Value is < 0 and RADIX_HEX is not set in Flags, then the fist character in
+ Buffer is a '-'.
+ If PREFIX_ZERO is set in Flags and PREFIX_ZERO is not being ignored, then
+ Buffer is padded with '0' characters so the combination of the optional '-'
+ sign character, '0' characters, digit characters for Value, and the
+ Null-terminator add up to Width characters.
+
+ If Buffer is not aligned on a 16-bit boundary, then ASSERT().
+ If an error would be returned, then the function will also ASSERT().
+
+ @param Buffer The pointer to the output buffer for the produced
+ Null-terminated Unicode string.
+ @param BufferSize The size of Buffer in bytes, including the
+ Null-terminator.
+ @param Flags The bitmask of flags that specify left justification,
+ zero pad, and commas.
+ @param Value The 64-bit signed value to convert to a string.
+ @param Width The maximum number of Unicode characters to place in
+ Buffer, not including the Null-terminator.
+
+ @retval RETURN_SUCCESS The decimal value is converted.
+ @retval RETURN_BUFFER_TOO_SMALL If BufferSize cannot hold the converted
+ value.
+ @retval RETURN_INVALID_PARAMETER If Buffer is NULL.
+ If PcdMaximumUnicodeStringLength is not
+ zero, and BufferSize is greater than
+ (PcdMaximumUnicodeStringLength *
+ sizeof (CHAR16) + 1).
+ If unsupported bits are set in Flags.
+ If both COMMA_TYPE and RADIX_HEX are set in
+ Flags.
+ If Width >= MAXIMUM_VALUE_CHARACTERS.
+
+**/
+RETURN_STATUS
+EFIAPI
+UnicodeValueToStringS (
+ IN OUT CHAR16 *Buffer,
+ IN UINTN BufferSize,
+ IN UINTN Flags,
+ IN INT64 Value,
+ IN UINTN Width
+ );
+
+/**
Produces a Null-terminated ASCII string in an output buffer based on a Null-terminated
ASCII format string and a VA_LIST argument list.
@@ -871,6 +932,66 @@ AsciiValueToString (
);
/**
+ Converts a decimal value to a Null-terminated Ascii string.
+
+ Converts the decimal number specified by Value to a Null-terminated Ascii
+ string specified by Buffer containing at most Width characters. No padding of
+ spaces is ever performed. If Width is 0 then a width of
+ MAXIMUM_VALUE_CHARACTERS is assumed. If the conversion contains more than
+ Width characters, then only the first Width characters are placed in Buffer.
+ Additional conversion parameters are specified in Flags.
+
+ The Flags bit LEFT_JUSTIFY is always ignored.
+ All conversions are left justified in Buffer.
+ If Width is 0, PREFIX_ZERO is ignored in Flags.
+ If COMMA_TYPE is set in Flags, then PREFIX_ZERO is ignored in Flags, and
+ commas are inserted every 3rd digit starting from the right.
+ If RADIX_HEX is set in Flags, then the output buffer will be formatted in
+ hexadecimal format.
+ If Value is < 0 and RADIX_HEX is not set in Flags, then the fist character in
+ Buffer is a '-'.
+ If PREFIX_ZERO is set in Flags and PREFIX_ZERO is not being ignored, then
+ Buffer is padded with '0' characters so the combination of the optional '-'
+ sign character, '0' characters, digit characters for Value, and the
+ Null-terminator add up to Width characters.
+
+ If Buffer is not aligned on a 16-bit boundary, then ASSERT().
+ If an error would be returned, then the function will also ASSERT().
+
+ @param Buffer The pointer to the output buffer for the produced
+ Null-terminated Ascii string.
+ @param BufferSize The size of Buffer in bytes, including the
+ Null-terminator.
+ @param Flags The bitmask of flags that specify left justification,
+ zero pad, and commas.
+ @param Value The 64-bit signed value to convert to a string.
+ @param Width The maximum number of Ascii characters to place in
+ Buffer, not including the Null-terminator.
+
+ @retval RETURN_SUCCESS The decimal value is converted.
+ @retval RETURN_BUFFER_TOO_SMALL If BufferSize cannot hold the converted
+ value.
+ @retval RETURN_INVALID_PARAMETER If Buffer is NULL.
+ If PcdMaximumAsciiStringLength is not
+ zero, and BufferSize is greater than
+ PcdMaximumAsciiStringLength.
+ If unsupported bits are set in Flags.
+ If both COMMA_TYPE and RADIX_HEX are set in
+ Flags.
+ If Width >= MAXIMUM_VALUE_CHARACTERS.
+
+**/
+RETURN_STATUS
+EFIAPI
+AsciiValueToStringS (
+ IN OUT CHAR8 *Buffer,
+ IN UINTN BufferSize,
+ IN UINTN Flags,
+ IN INT64 Value,
+ IN UINTN Width
+ );
+
+/**
Returns the number of characters that would be produced by if the formatted
output were produced not including the Null-terminator.
diff --git a/MdePkg/Library/BasePrintLib/PrintLib.c b/MdePkg/Library/BasePrintLib/PrintLib.c
index bf8c7bf..221b52e 100644
--- a/MdePkg/Library/BasePrintLib/PrintLib.c
+++ b/MdePkg/Library/BasePrintLib/PrintLib.c
@@ -404,6 +404,71 @@ UnicodeValueToString (
}
/**
+ Converts a decimal value to a Null-terminated Unicode string.
+
+ Converts the decimal number specified by Value to a Null-terminated Unicode
+ string specified by Buffer containing at most Width characters. No padding of
+ spaces is ever performed. If Width is 0 then a width of
+ MAXIMUM_VALUE_CHARACTERS is assumed. If the conversion contains more than
+ Width characters, then only the first Width characters are placed in Buffer.
+ Additional conversion parameters are specified in Flags.
+
+ The Flags bit LEFT_JUSTIFY is always ignored.
+ All conversions are left justified in Buffer.
+ If Width is 0, PREFIX_ZERO is ignored in Flags.
+ If COMMA_TYPE is set in Flags, then PREFIX_ZERO is ignored in Flags, and
+ commas are inserted every 3rd digit starting from the right.
+ If RADIX_HEX is set in Flags, then the output buffer will be formatted in
+ hexadecimal format.
+ If Value is < 0 and RADIX_HEX is not set in Flags, then the fist character in
+ Buffer is a '-'.
+ If PREFIX_ZERO is set in Flags and PREFIX_ZERO is not being ignored, then
+ Buffer is padded with '0' characters so the combination of the optional '-'
+ sign character, '0' characters, digit characters for Value, and the
+ Null-terminator add up to Width characters.
+
+ If Buffer is not aligned on a 16-bit boundary, then ASSERT().
+ If an error would be returned, then the function will also ASSERT().
+
+ @param Buffer The pointer to the output buffer for the produced
+ Null-terminated Unicode string.
+ @param BufferSize The size of Buffer in bytes, including the
+ Null-terminator.
+ @param Flags The bitmask of flags that specify left justification,
+ zero pad, and commas.
+ @param Value The 64-bit signed value to convert to a string.
+ @param Width The maximum number of Unicode characters to place in
+ Buffer, not including the Null-terminator.
+
+ @retval RETURN_SUCCESS The decimal value is converted.
+ @retval RETURN_BUFFER_TOO_SMALL If BufferSize cannot hold the converted
+ value.
+ @retval RETURN_INVALID_PARAMETER If Buffer is NULL.
+ If PcdMaximumUnicodeStringLength is not
+ zero, and BufferSize is greater than
+ (PcdMaximumUnicodeStringLength *
+ sizeof (CHAR16) + 1).
+ If unsupported bits are set in Flags.
+ If both COMMA_TYPE and RADIX_HEX are set in
+ Flags.
+ If Width >= MAXIMUM_VALUE_CHARACTERS.
+
+**/
+RETURN_STATUS
+EFIAPI
+UnicodeValueToStringS (
+ IN OUT CHAR16 *Buffer,
+ IN UINTN BufferSize,
+ IN UINTN Flags,
+ IN INT64 Value,
+ IN UINTN Width
+ )
+{
+ ASSERT_UNICODE_BUFFER(Buffer);
+ return BasePrintLibConvertValueToStringS ((CHAR8 *)Buffer, BufferSize, Flags, Value, Width, 2);
+}
+
+/**
Produces a Null-terminated ASCII string in an output buffer based on a Null-terminated
ASCII format string and a VA_LIST argument list.
@@ -769,6 +834,69 @@ AsciiValueToString (
}
/**
+ Converts a decimal value to a Null-terminated Ascii string.
+
+ Converts the decimal number specified by Value to a Null-terminated Ascii
+ string specified by Buffer containing at most Width characters. No padding of
+ spaces is ever performed. If Width is 0 then a width of
+ MAXIMUM_VALUE_CHARACTERS is assumed. If the conversion contains more than
+ Width characters, then only the first Width characters are placed in Buffer.
+ Additional conversion parameters are specified in Flags.
+
+ The Flags bit LEFT_JUSTIFY is always ignored.
+ All conversions are left justified in Buffer.
+ If Width is 0, PREFIX_ZERO is ignored in Flags.
+ If COMMA_TYPE is set in Flags, then PREFIX_ZERO is ignored in Flags, and
+ commas are inserted every 3rd digit starting from the right.
+ If RADIX_HEX is set in Flags, then the output buffer will be formatted in
+ hexadecimal format.
+ If Value is < 0 and RADIX_HEX is not set in Flags, then the fist character in
+ Buffer is a '-'.
+ If PREFIX_ZERO is set in Flags and PREFIX_ZERO is not being ignored, then
+ Buffer is padded with '0' characters so the combination of the optional '-'
+ sign character, '0' characters, digit characters for Value, and the
+ Null-terminator add up to Width characters.
+
+ If Buffer is not aligned on a 16-bit boundary, then ASSERT().
+ If an error would be returned, then the function will also ASSERT().
+
+ @param Buffer The pointer to the output buffer for the produced
+ Null-terminated Ascii string.
+ @param BufferSize The size of Buffer in bytes, including the
+ Null-terminator.
+ @param Flags The bitmask of flags that specify left justification,
+ zero pad, and commas.
+ @param Value The 64-bit signed value to convert to a string.
+ @param Width The maximum number of Ascii characters to place in
+ Buffer, not including the Null-terminator.
+
+ @retval RETURN_SUCCESS The decimal value is converted.
+ @retval RETURN_BUFFER_TOO_SMALL If BufferSize cannot hold the converted
+ value.
+ @retval RETURN_INVALID_PARAMETER If Buffer is NULL.
+ If PcdMaximumAsciiStringLength is not
+ zero, and BufferSize is greater than
+ PcdMaximumAsciiStringLength.
+ If unsupported bits are set in Flags.
+ If both COMMA_TYPE and RADIX_HEX are set in
+ Flags.
+ If Width >= MAXIMUM_VALUE_CHARACTERS.
+
+**/
+RETURN_STATUS
+EFIAPI
+AsciiValueToStringS (
+ IN OUT CHAR8 *Buffer,
+ IN UINTN BufferSize,
+ IN UINTN Flags,
+ IN INT64 Value,
+ IN UINTN Width
+ )
+{
+ return BasePrintLibConvertValueToStringS (Buffer, BufferSize, Flags, Value, Width, 1);
+}
+
+/**
Returns the number of characters that would be produced by if the formatted
output were produced not including the Null-terminator.
diff --git a/MdePkg/Library/BasePrintLib/PrintLibInternal.c b/MdePkg/Library/BasePrintLib/PrintLibInternal.c
index 155fe6a..9b15a07 100644
--- a/MdePkg/Library/BasePrintLib/PrintLibInternal.c
+++ b/MdePkg/Library/BasePrintLib/PrintLibInternal.c
@@ -292,6 +292,210 @@ BasePrintLibConvertValueToString (
}
/**
+ Internal function that converts a decimal value to a Null-terminated string.
+
+ Converts the decimal number specified by Value to a Null-terminated string
+ specified by Buffer containing at most Width characters. If Width is 0 then a
+ width of MAXIMUM_VALUE_CHARACTERS is assumed. If the conversion contains more
+ than Width characters, then only the first Width characters are placed in
+ Buffer. Additional conversion parameters are specified in Flags.
+ The Flags bit LEFT_JUSTIFY is always ignored.
+ All conversions are left justified in Buffer.
+ If Width is 0, PREFIX_ZERO is ignored in Flags.
+ If COMMA_TYPE is set in Flags, then PREFIX_ZERO is ignored in Flags, and
+ commas are inserted every 3rd digit starting from the right.
+ If Value is < 0, then the fist character in Buffer is a '-'.
+ If PREFIX_ZERO is set in Flags and PREFIX_ZERO is not being ignored,
+ then Buffer is padded with '0' characters so the combination of the optional
+ '-' sign character, '0' characters, digit characters for Value, and the
+ Null-terminator add up to Width characters.
+
+ If an error would be returned, the function will ASSERT().
+
+ @param Buffer The pointer to the output buffer for the produced
+ Null-terminated string.
+ @param BufferSize The size of Buffer in bytes, including the
+ Null-terminator.
+ @param Flags The bitmask of flags that specify left justification,
+ zero pad, and commas.
+ @param Value The 64-bit signed value to convert to a string.
+ @param Width The maximum number of characters to place in Buffer,
+ not including the Null-terminator.
+ @param Increment The character increment in Buffer.
+
+ @retval RETURN_SUCCESS The decimal value is converted.
+ @retval RETURN_BUFFER_TOO_SMALL If BufferSize cannot hold the converted
+ value.
+ @retval RETURN_INVALID_PARAMETER If Buffer is NULL.
+ If Increment is 1 and
+ PcdMaximumAsciiStringLength is not zero,
+ BufferSize is greater than
+ PcdMaximumAsciiStringLength.
+ If Increment is not 1 and
+ PcdMaximumUnicodeStringLength is not zero,
+ BufferSize is greater than
+ (PcdMaximumUnicodeStringLength *
+ sizeof (CHAR16) + 1).
+ If unsupported bits are set in Flags.
+ If both COMMA_TYPE and RADIX_HEX are set in
+ Flags.
+ If Width >= MAXIMUM_VALUE_CHARACTERS.
+
+**/
+RETURN_STATUS
+BasePrintLibConvertValueToStringS (
+ IN OUT CHAR8 *Buffer,
+ IN UINTN BufferSize,
+ IN UINTN Flags,
+ IN INT64 Value,
+ IN UINTN Width,
+ IN UINTN Increment
+ )
+{
+ CHAR8 *EndBuffer;
+ CHAR8 ValueBuffer[MAXIMUM_VALUE_CHARACTERS];
+ CHAR8 *ValueBufferPtr;
+ UINTN Count;
+ UINTN Digits;
+ UINTN Index;
+ UINTN Radix;
+
+ //
+ // 1. Buffer shall not be a null pointer.
+ //
+ SAFE_PRINT_CONSTRAINT_CHECK ((Buffer != NULL), RETURN_INVALID_PARAMETER);
+
+ //
+ // 2. BufferSize shall not be greater than (RSIZE_MAX * sizeof (CHAR16)) for
+ // Unicode output string or shall not be greater than ASCII_RSIZE_MAX for
+ // Ascii output string.
+ //
+ if (Increment == 1) {
+ //
+ // Ascii output string
+ //
+ if (ASCII_RSIZE_MAX != 0) {
+ SAFE_PRINT_CONSTRAINT_CHECK ((BufferSize <= ASCII_RSIZE_MAX), RETURN_INVALID_PARAMETER);
+ }
+ } else {
+ //
+ // Unicode output string
+ //
+ if (RSIZE_MAX != 0) {
+ SAFE_PRINT_CONSTRAINT_CHECK ((BufferSize <= RSIZE_MAX * sizeof (CHAR16) + 1), RETURN_INVALID_PARAMETER);
+ }
+ }
+
+ //
+ // 3. Flags shall be set properly.
+ //
+ SAFE_PRINT_CONSTRAINT_CHECK (((Flags & ~(LEFT_JUSTIFY | COMMA_TYPE | PREFIX_ZERO | RADIX_HEX)) == 0), RETURN_INVALID_PARAMETER);
+ SAFE_PRINT_CONSTRAINT_CHECK ((((Flags & COMMA_TYPE) == 0) || ((Flags & RADIX_HEX) == 0)), RETURN_INVALID_PARAMETER);
+
+ //
+ // 4. Width shall be smaller than MAXIMUM_VALUE_CHARACTERS.
+ //
+ SAFE_PRINT_CONSTRAINT_CHECK ((Width < MAXIMUM_VALUE_CHARACTERS), RETURN_INVALID_PARAMETER);
+
+ //
+ // Width is 0 or COMMA_TYPE is set, PREFIX_ZERO is ignored.
+ //
+ if (Width == 0 || (Flags & COMMA_TYPE) != 0) {
+ Flags &= ~((UINTN) PREFIX_ZERO);
+ }
+ //
+ // If Width is 0 then a width of MAXIMUM_VALUE_CHARACTERS is assumed.
+ //
+ if (Width == 0) {
+ Width = MAXIMUM_VALUE_CHARACTERS - 1;
+ }
+
+ //
+ // Count the characters of the output string.
+ //
+ Count = 0;
+ Radix = ((Flags & RADIX_HEX) == 0)? 10 : 16;
+
+ if ((Flags & PREFIX_ZERO) != 0) {
+ Count = Width;
+ } else {
+ if ((Value < 0) && ((Flags & RADIX_HEX) == 0)) {
+ Count++; // minus sign
+ ValueBufferPtr = BasePrintLibValueToString (ValueBuffer, -Value, Radix);
+ } else {
+ ValueBufferPtr = BasePrintLibValueToString (ValueBuffer, Value, Radix);
+ }
+ Digits = ValueBufferPtr - ValueBuffer;
+ Count += Digits;
+
+ if ((Flags & COMMA_TYPE) != 0) {
+ Count += (Digits - 1) / 3; // commas
+ }
+ }
+
+ Width = MIN (Count, Width);
+
+ //
+ // 5. BufferSize shall be large enough to hold the converted string.
+ //
+ SAFE_PRINT_CONSTRAINT_CHECK ((BufferSize >= (Width + 1) * Increment), RETURN_BUFFER_TOO_SMALL);
+
+ //
+ // Set the tag for the end of the input Buffer.
+ //
+ EndBuffer = Buffer + Width * Increment;
+
+ //
+ // Convert decimal negative
+ //
+ if ((Value < 0) && ((Flags & RADIX_HEX) == 0)) {
+ Value = -Value;
+ Buffer = BasePrintLibFillBuffer (Buffer, EndBuffer, 1, '-', Increment);
+ Width--;
+ }
+
+ //
+ // Count the length of the value string.
+ //
+ ValueBufferPtr = BasePrintLibValueToString (ValueBuffer, Value, Radix);
+ Count = ValueBufferPtr - ValueBuffer;
+
+ //
+ // Append Zero
+ //
+ if ((Flags & PREFIX_ZERO) != 0) {
+ Buffer = BasePrintLibFillBuffer (Buffer, EndBuffer, Width - Count, '0', Increment);
+ }
+
+ //
+ // Print Comma type for every 3 characters
+ //
+ Digits = Count % 3;
+ if (Digits != 0) {
+ Digits = 3 - Digits;
+ }
+ for (Index = 0; Index < Count; Index++) {
+ Buffer = BasePrintLibFillBuffer (Buffer, EndBuffer, 1, *ValueBufferPtr--, Increment);
+ if ((Flags & COMMA_TYPE) != 0) {
+ Digits++;
+ if (Digits == 3) {
+ Digits = 0;
+ if ((Index + 1) < Count) {
+ Buffer = BasePrintLibFillBuffer (Buffer, EndBuffer, 1, ',', Increment);
+ }
+ }
+ }
+ }
+
+ //
+ // Print Null-terminator
+ //
+ BasePrintLibFillBuffer (Buffer, EndBuffer + Increment, 1, 0, Increment);
+
+ return RETURN_SUCCESS;
+}
+
+/**
Worker function that produces a Null-terminated string in an output buffer
based on a Null-terminated format string and a VA_LIST argument list.
diff --git a/MdePkg/Library/BasePrintLib/PrintLibInternal.h b/MdePkg/Library/BasePrintLib/PrintLibInternal.h
index fccef9b..052e699 100644
--- a/MdePkg/Library/BasePrintLib/PrintLibInternal.h
+++ b/MdePkg/Library/BasePrintLib/PrintLibInternal.h
@@ -213,4 +213,65 @@ BasePrintLibConvertValueToString (
IN UINTN Increment
);
+/**
+ Internal function that converts a decimal value to a Null-terminated string.
+
+ Converts the decimal number specified by Value to a Null-terminated string
+ specified by Buffer containing at most Width characters. If Width is 0 then a
+ width of MAXIMUM_VALUE_CHARACTERS is assumed. If the conversion contains more
+ than Width characters, then only the first Width characters are placed in
+ Buffer. Additional conversion parameters are specified in Flags.
+ The Flags bit LEFT_JUSTIFY is always ignored.
+ All conversions are left justified in Buffer.
+ If Width is 0, PREFIX_ZERO is ignored in Flags.
+ If COMMA_TYPE is set in Flags, then PREFIX_ZERO is ignored in Flags, and
+ commas are inserted every 3rd digit starting from the right.
+ If Value is < 0, then the fist character in Buffer is a '-'.
+ If PREFIX_ZERO is set in Flags and PREFIX_ZERO is not being ignored,
+ then Buffer is padded with '0' characters so the combination of the optional
+ '-' sign character, '0' characters, digit characters for Value, and the
+ Null-terminator add up to Width characters.
+
+ If an error would be returned, the function will ASSERT().
+
+ @param Buffer The pointer to the output buffer for the produced
+ Null-terminated string.
+ @param BufferSize The size of Buffer in bytes, including the
+ Null-terminator.
+ @param Flags The bitmask of flags that specify left justification,
+ zero pad, and commas.
+ @param Value The 64-bit signed value to convert to a string.
+ @param Width The maximum number of characters to place in Buffer,
+ not including the Null-terminator.
+ @param Increment The character increment in Buffer.
+
+ @retval RETURN_SUCCESS The decimal value is converted.
+ @retval RETURN_BUFFER_TOO_SMALL If BufferSize cannot hold the converted
+ value.
+ @retval RETURN_INVALID_PARAMETER If Buffer is NULL.
+ If Increment is 1 and
+ PcdMaximumAsciiStringLength is not zero,
+ BufferSize is greater than
+ PcdMaximumAsciiStringLength.
+ If Increment is not 1 and
+ PcdMaximumUnicodeStringLength is not zero,
+ BufferSize is greater than
+ (PcdMaximumUnicodeStringLength *
+ sizeof (CHAR16) + 1).
+ If unsupported bits are set in Flags.
+ If both COMMA_TYPE and RADIX_HEX are set in
+ Flags.
+ If Width >= MAXIMUM_VALUE_CHARACTERS.
+
+**/
+RETURN_STATUS
+BasePrintLibConvertValueToStringS (
+ IN OUT CHAR8 *Buffer,
+ IN UINTN BufferSize,
+ IN UINTN Flags,
+ IN INT64 Value,
+ IN UINTN Width,
+ IN UINTN Increment
+ );
+
#endif
--
1.9.5.msysgit.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/4] MdeModulePkg: Add the EFI_PRINT2S_PROTOCOL
2017-02-09 6:02 [PATCH v2 0/4] PrintLib: Add safe print functions [A|U]ValueToStringS Hao Wu
2017-02-09 6:02 ` [PATCH v2 1/4] MdePkg/BasePrintLib: " Hao Wu
@ 2017-02-09 6:02 ` Hao Wu
2017-02-09 6:02 ` [PATCH v2 3/4] MdeModulePkg/PrintLib: Use EFI_PRINT2S_PROTOCOL for this instance Hao Wu
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Hao Wu @ 2017-02-09 6:02 UTC (permalink / raw)
To: edk2-devel; +Cc: Hao Wu, Jiewen Yao, Liming Gao, Michael Kinney
Add the EFI_PRINT2S_PROTOCOL as a safe version of the EFI_PRINT2_PROTOCOL,
the EFI_PRINT2S_PROTOCOL replaces the following 2 services in
EFI_PRINT2_PROTOCOL:
UNICODE_VALUE_TO_STRING
ASCII_VALUE_TO_STRING
with:
UNICODE_VALUE_TO_STRING_S
ASCII_VALUE_TO_STRING_S
The 2 new services perform checks to the input parameters and will return
relative status to reflect the check result.
Return RETURN_INVALID_PARAMETER when:
1). The input Buffer is NULL.
2). The input BufferSize is greater than (PcdMaximumUnicodeStringLength *
sizeof (CHAR16) + 1) for UnicodeValueToStringS or greater than
PcdMaximumAsciiStringLength for AsciiValueToStringS.
3). The input Flags is not set properly.
4). The input Width is not smaller than MAXIMUM_VALUE_CHARACTERS.
Return RETURN_BUFFER_TOO_SMALL when:
1). The input BufferSize cannot hold the converted value.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
---
MdeModulePkg/Include/Protocol/Print2.h | 150 +++++++++++++++++++-
MdeModulePkg/MdeModulePkg.dec | 3 +-
MdeModulePkg/Universal/PrintDxe/Print.c | 18 ++-
MdeModulePkg/Universal/PrintDxe/PrintDxe.inf | 7 +-
MdeModulePkg/Universal/PrintDxe/PrintDxe.uni | 10 +-
5 files changed, 175 insertions(+), 13 deletions(-)
diff --git a/MdeModulePkg/Include/Protocol/Print2.h b/MdeModulePkg/Include/Protocol/Print2.h
index 8cad6fd..e4dd6f2 100644
--- a/MdeModulePkg/Include/Protocol/Print2.h
+++ b/MdeModulePkg/Include/Protocol/Print2.h
@@ -1,7 +1,8 @@
/** @file
- This print protocol defines six basic print functions to
- print the format unicode and ascii string.
+ Produces EFI_PRINT2_PROTOCOL and EFI_PRINT2S_PROTOCOL.
+ These protocols define basic print functions to print the format unicode and
+ ascii string.
Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available under
@@ -515,4 +516,149 @@ struct _EFI_PRINT2_PROTOCOL {
extern EFI_GUID gEfiPrint2ProtocolGuid;
+
+#define EFI_PRINT2S_PROTOCOL_GUID \
+ { 0xcc252d2, 0xc106, 0x4661, { 0xb5, 0xbd, 0x31, 0x47, 0xa4, 0xf8, 0x1f, 0x92 } }
+
+//
+// Forward reference for pure ANSI compatability
+//
+typedef struct _EFI_PRINT2S_PROTOCOL EFI_PRINT2S_PROTOCOL;
+
+/**
+ Converts a decimal value to a Null-terminated Unicode string.
+
+ Converts the decimal number specified by Value to a Null-terminated Unicode
+ string specified by Buffer containing at most Width characters. No padding of
+ spaces is ever performed. If Width is 0 then a width of
+ MAXIMUM_VALUE_CHARACTERS is assumed. If the conversion contains more than
+ Width characters, then only the first Width characters are placed in Buffer.
+ Additional conversion parameters are specified in Flags.
+
+ The Flags bit LEFT_JUSTIFY is always ignored.
+ All conversions are left justified in Buffer.
+ If Width is 0, PREFIX_ZERO is ignored in Flags.
+ If COMMA_TYPE is set in Flags, then PREFIX_ZERO is ignored in Flags, and
+ commas are inserted every 3rd digit starting from the right.
+ If RADIX_HEX is set in Flags, then the output buffer will be formatted in
+ hexadecimal format.
+ If Value is < 0 and RADIX_HEX is not set in Flags, then the fist character in
+ Buffer is a '-'.
+ If PREFIX_ZERO is set in Flags and PREFIX_ZERO is not being ignored, then
+ Buffer is padded with '0' characters so the combination of the optional '-'
+ sign character, '0' characters, digit characters for Value, and the
+ Null-terminator add up to Width characters.
+
+ If Buffer is not aligned on a 16-bit boundary, then ASSERT().
+ If an error would be returned, then the function will also ASSERT().
+
+ @param Buffer The pointer to the output buffer for the produced
+ Null-terminated Unicode string.
+ @param BufferSize The size of Buffer in bytes, including the
+ Null-terminator.
+ @param Flags The bitmask of flags that specify left justification,
+ zero pad, and commas.
+ @param Value The 64-bit signed value to convert to a string.
+ @param Width The maximum number of Unicode characters to place in
+ Buffer, not including the Null-terminator.
+
+ @retval RETURN_SUCCESS The decimal value is converted.
+ @retval RETURN_BUFFER_TOO_SMALL If BufferSize cannot hold the converted
+ value.
+ @retval RETURN_INVALID_PARAMETER If Buffer is NULL.
+ If PcdMaximumUnicodeStringLength is not
+ zero, and BufferSize is greater than
+ (PcdMaximumUnicodeStringLength *
+ sizeof (CHAR16) + 1).
+ If unsupported bits are set in Flags.
+ If both COMMA_TYPE and RADIX_HEX are set in
+ Flags.
+ If Width >= MAXIMUM_VALUE_CHARACTERS.
+
+**/
+typedef
+RETURN_STATUS
+(EFIAPI *UNICODE_VALUE_TO_STRING_S)(
+ IN OUT CHAR16 *Buffer,
+ IN UINTN BufferSize,
+ IN UINTN Flags,
+ IN INT64 Value,
+ IN UINTN Width
+ );
+
+/**
+ Converts a decimal value to a Null-terminated Ascii string.
+
+ Converts the decimal number specified by Value to a Null-terminated Ascii
+ string specified by Buffer containing at most Width characters. No padding of
+ spaces is ever performed. If Width is 0 then a width of
+ MAXIMUM_VALUE_CHARACTERS is assumed. If the conversion contains more than
+ Width characters, then only the first Width characters are placed in Buffer.
+ Additional conversion parameters are specified in Flags.
+
+ The Flags bit LEFT_JUSTIFY is always ignored.
+ All conversions are left justified in Buffer.
+ If Width is 0, PREFIX_ZERO is ignored in Flags.
+ If COMMA_TYPE is set in Flags, then PREFIX_ZERO is ignored in Flags, and
+ commas are inserted every 3rd digit starting from the right.
+ If RADIX_HEX is set in Flags, then the output buffer will be formatted in
+ hexadecimal format.
+ If Value is < 0 and RADIX_HEX is not set in Flags, then the fist character in
+ Buffer is a '-'.
+ If PREFIX_ZERO is set in Flags and PREFIX_ZERO is not being ignored, then
+ Buffer is padded with '0' characters so the combination of the optional '-'
+ sign character, '0' characters, digit characters for Value, and the
+ Null-terminator add up to Width characters.
+
+ If Buffer is not aligned on a 16-bit boundary, then ASSERT().
+ If an error would be returned, then the function will also ASSERT().
+
+ @param Buffer The pointer to the output buffer for the produced
+ Null-terminated Ascii string.
+ @param BufferSize The size of Buffer in bytes, including the
+ Null-terminator.
+ @param Flags The bitmask of flags that specify left justification,
+ zero pad, and commas.
+ @param Value The 64-bit signed value to convert to a string.
+ @param Width The maximum number of Ascii characters to place in
+ Buffer, not including the Null-terminator.
+
+ @retval RETURN_SUCCESS The decimal value is converted.
+ @retval RETURN_BUFFER_TOO_SMALL If BufferSize cannot hold the converted
+ value.
+ @retval RETURN_INVALID_PARAMETER If Buffer is NULL.
+ If PcdMaximumAsciiStringLength is not
+ zero, and BufferSize is greater than
+ PcdMaximumAsciiStringLength.
+ If unsupported bits are set in Flags.
+ If both COMMA_TYPE and RADIX_HEX are set in
+ Flags.
+ If Width >= MAXIMUM_VALUE_CHARACTERS.
+
+**/
+typedef
+RETURN_STATUS
+(EFIAPI *ASCII_VALUE_TO_STRING_S)(
+ IN OUT CHAR8 *Buffer,
+ IN UINTN BufferSize,
+ IN UINTN Flags,
+ IN INT64 Value,
+ IN UINTN Width
+ );
+
+struct _EFI_PRINT2S_PROTOCOL {
+ UNICODE_BS_PRINT UnicodeBSPrint;
+ UNICODE_S_PRINT UnicodeSPrint;
+ UNICODE_BS_PRINT_ASCII_FORMAT UnicodeBSPrintAsciiFormat;
+ UNICODE_S_PRINT_ASCII_FORMAT UnicodeSPrintAsciiFormat;
+ UNICODE_VALUE_TO_STRING_S UnicodeValueToStringS;
+ ASCII_BS_PRINT AsciiBSPrint;
+ ASCII_S_PRINT AsciiSPrint;
+ ASCII_BS_PRINT_UNICODE_FORMAT AsciiBSPrintUnicodeFormat;
+ ASCII_S_PRINT_UNICODE_FORMAT AsciiSPrintUnicodeFormat;
+ ASCII_VALUE_TO_STRING_S AsciiValueToStringS;
+};
+
+extern EFI_GUID gEfiPrint2SProtocolGuid;
+
#endif
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 273cd7e..c95633c 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -427,9 +427,10 @@
# If developer need implement such functionality, they should use BasePeCoffLib.
gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
- ## Print protocol defines basic print functions to print the format unicode and ascii string.
+ ## Print protocols define basic print functions to print the format unicode and ascii string.
# Include/Protocol/Print2.h
gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
+ gEfiPrint2SProtocolGuid = { 0xcc252d2, 0xc106, 0x4661, { 0xb5, 0xbd, 0x31, 0x47, 0xa4, 0xf8, 0x1f, 0x92 } }
## This protocol defines the generic memory test interfaces in Dxe phase.
# Include/Protocol/GenericMemoryTest.h
diff --git a/MdeModulePkg/Universal/PrintDxe/Print.c b/MdeModulePkg/Universal/PrintDxe/Print.c
index af55acf..85bc724 100644
--- a/MdeModulePkg/Universal/PrintDxe/Print.c
+++ b/MdeModulePkg/Universal/PrintDxe/Print.c
@@ -1,7 +1,7 @@
/** @file
- This driver produces Print2 protocol layered on top of the PrintLib from the MdePkg.
+ This driver produces Print2 protocols layered on top of the PrintLib from the MdePkg.
-Copyright (c) 2009, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2009 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -35,6 +35,19 @@ CONST EFI_PRINT2_PROTOCOL mPrint2Protocol = {
AsciiValueToString
};
+CONST EFI_PRINT2S_PROTOCOL mPrint2SProtocol = {
+ UnicodeBSPrint,
+ UnicodeSPrint,
+ UnicodeBSPrintAsciiFormat,
+ UnicodeSPrintAsciiFormat,
+ UnicodeValueToStringS,
+ AsciiBSPrint,
+ AsciiSPrint,
+ AsciiBSPrintUnicodeFormat,
+ AsciiSPrintUnicodeFormat,
+ AsciiValueToStringS
+};
+
/**
The user Entry Point for Print module.
@@ -59,6 +72,7 @@ PrintEntryPoint (
Status = gBS->InstallMultipleProtocolInterfaces (
&mPrintThunkHandle,
&gEfiPrint2ProtocolGuid, &mPrint2Protocol,
+ &gEfiPrint2SProtocolGuid, &mPrint2SProtocol,
NULL
);
ASSERT_EFI_ERROR (Status);
diff --git a/MdeModulePkg/Universal/PrintDxe/PrintDxe.inf b/MdeModulePkg/Universal/PrintDxe/PrintDxe.inf
index 9ea0652..19eef5a 100644
--- a/MdeModulePkg/Universal/PrintDxe/PrintDxe.inf
+++ b/MdeModulePkg/Universal/PrintDxe/PrintDxe.inf
@@ -1,9 +1,9 @@
## @file
-# Print DXE driver that produces Print2 Protocol.
+# Print DXE driver that produces Print2 Protocols.
#
-# This driver produces Print2 protocol layered on top of the PrintLib from the MdePkg.
+# This driver produces Print2 protocols layered on top of the PrintLib from the MdePkg.
#
-# Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2009 - 2017, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
@@ -44,6 +44,7 @@
[Protocols]
gEfiPrint2ProtocolGuid ## PRODUCES
+ gEfiPrint2SProtocolGuid ## PRODUCES
[Depex]
TRUE
diff --git a/MdeModulePkg/Universal/PrintDxe/PrintDxe.uni b/MdeModulePkg/Universal/PrintDxe/PrintDxe.uni
index accb114..10f0ff8 100644
--- a/MdeModulePkg/Universal/PrintDxe/PrintDxe.uni
+++ b/MdeModulePkg/Universal/PrintDxe/PrintDxe.uni
@@ -1,9 +1,9 @@
// /** @file
-// Print DXE driver that produces Print2 Protocol.
+// Print DXE driver that produces Print2 Protocols.
//
-// This driver produces Print2 protocol layered on top of the PrintLib from the MdePkg.
+// This driver produces Print2 protocols layered on top of the PrintLib from the MdePkg.
//
-// Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2009 - 2017, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -16,7 +16,7 @@
// **/
-#string STR_MODULE_ABSTRACT #language en-US "Print DXE driver that produces Print2 Protocol"
+#string STR_MODULE_ABSTRACT #language en-US "Print DXE driver that produces Print2 Protocols"
-#string STR_MODULE_DESCRIPTION #language en-US "This driver produces Print2 protocol layered on top of the PrintLib from the MdePkg."
+#string STR_MODULE_DESCRIPTION #language en-US "This driver produces Print2 protocols layered on top of the PrintLib from the MdePkg."
--
1.9.5.msysgit.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 3/4] MdeModulePkg/PrintLib: Use EFI_PRINT2S_PROTOCOL for this instance
2017-02-09 6:02 [PATCH v2 0/4] PrintLib: Add safe print functions [A|U]ValueToStringS Hao Wu
2017-02-09 6:02 ` [PATCH v2 1/4] MdePkg/BasePrintLib: " Hao Wu
2017-02-09 6:02 ` [PATCH v2 2/4] MdeModulePkg: Add the EFI_PRINT2S_PROTOCOL Hao Wu
@ 2017-02-09 6:02 ` Hao Wu
2017-02-09 6:02 ` [PATCH v2 4/4] MdeModulePkg/PrintLib: Add safe print functions [A|U]ValueToStringS Hao Wu
2017-02-20 2:53 ` [PATCH v2 0/4] PrintLib: " Gao, Liming
4 siblings, 0 replies; 6+ messages in thread
From: Hao Wu @ 2017-02-09 6:02 UTC (permalink / raw)
To: edk2-devel; +Cc: Hao Wu, Jiewen Yao, Liming Gao, Michael Kinney
The commit updates the PrintLib instance
MdeModulePkg/Library/DxePrintLibPrint2Protocol to use EFI_PRINT2S_PROTOCOL
to implement the APIs.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
---
MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.inf | 4 +-
MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.uni | 10 ++--
MdeModulePkg/Library/DxePrintLibPrint2Protocol/PrintLib.c | 56 +++++++++++++++-----
3 files changed, 49 insertions(+), 21 deletions(-)
diff --git a/MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.inf b/MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.inf
index 55ee940..1cda2dc 100644
--- a/MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.inf
+++ b/MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.inf
@@ -36,11 +36,11 @@
PcdLib
[Protocols]
- gEfiPrint2ProtocolGuid ## CONSUMES
+ gEfiPrint2SProtocolGuid ## CONSUMES
[Pcd]
gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength ## SOMETIMES_CONSUMES
gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength ## SOMETIMES_CONSUMES
[Depex.common.DXE_DRIVER, Depex.common.DXE_RUNTIME_DRIVER, Depex.common.DXE_SAL_DRIVER, Depex.common.DXE_SMM_DRIVER]
- gEfiPrint2ProtocolGuid
+ gEfiPrint2SProtocolGuid
diff --git a/MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.uni b/MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.uni
index 29aa37c..3a9fb58 100644
--- a/MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.uni
+++ b/MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.uni
@@ -1,9 +1,9 @@
// /** @file
-// Library instance that implements Print Library class based on protocol gEfiPrint2ProtocolGuid.
+// Library instance that implements Print Library class based on protocol gEfiPrint2SProtocolGuid.
//
-// Library instance that implements Print Library class based on protocol gEfiPrint2ProtocolGuid.
+// Library instance that implements Print Library class based on protocol gEfiPrint2SProtocolGuid.
//
-// Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+// Copyright (c) 2009 - 2017, Intel Corporation. All rights reserved.<BR>
//
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
@@ -15,7 +15,7 @@
// **/
-#string STR_MODULE_ABSTRACT #language en-US "Implements Print Library class based on protocol gEfiPrint2ProtocolGuid"
+#string STR_MODULE_ABSTRACT #language en-US "Implements Print Library class based on protocol gEfiPrint2SProtocolGuid"
-#string STR_MODULE_DESCRIPTION #language en-US "Library instance that implements Print Library class based on protocol gEfiPrint2ProtocolGuid."
+#string STR_MODULE_DESCRIPTION #language en-US "Library instance that implements Print Library class based on protocol gEfiPrint2SProtocolGuid."
diff --git a/MdeModulePkg/Library/DxePrintLibPrint2Protocol/PrintLib.c b/MdeModulePkg/Library/DxePrintLibPrint2Protocol/PrintLib.c
index 438ac9e..b3e7cb2 100644
--- a/MdeModulePkg/Library/DxePrintLibPrint2Protocol/PrintLib.c
+++ b/MdeModulePkg/Library/DxePrintLibPrint2Protocol/PrintLib.c
@@ -1,8 +1,8 @@
/** @file
- Instance of Print Library based on gEfiPrint2ProtocolGuid.
+ Instance of Print Library based on gEfiPrint2SProtocolGuid.
Implement the print library instance by wrap the interface
- provided in the Print2 protocol. This protocol is defined as the internal
+ provided in the Print2S protocol. This protocol is defined as the internal
protocol related to this implementation, not in the public spec. So, this
library instance is only for this code base.
@@ -43,12 +43,12 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
} \
} while (FALSE)
-EFI_PRINT2_PROTOCOL *mPrint2Protocol = NULL;
+EFI_PRINT2S_PROTOCOL *mPrint2SProtocol = NULL;
/**
- The constructor function caches the pointer to Print2 protocol.
+ The constructor function caches the pointer to Print2S protocol.
- The constructor function locates Print2 protocol from protocol database.
+ The constructor function locates Print2S protocol from protocol database.
It will ASSERT() if that operation fails and it will always return EFI_SUCCESS.
@param ImageHandle The firmware allocated handle for the EFI image.
@@ -67,12 +67,12 @@ PrintLibConstructor (
EFI_STATUS Status;
Status = SystemTable->BootServices->LocateProtocol (
- &gEfiPrint2ProtocolGuid,
+ &gEfiPrint2SProtocolGuid,
NULL,
- (VOID**) &mPrint2Protocol
+ (VOID**) &mPrint2SProtocol
);
ASSERT_EFI_ERROR (Status);
- ASSERT (mPrint2Protocol != NULL);
+ ASSERT (mPrint2SProtocol != NULL);
return Status;
}
@@ -362,7 +362,7 @@ UnicodeBSPrint (
{
ASSERT_UNICODE_BUFFER (StartOfBuffer);
ASSERT_UNICODE_BUFFER (FormatString);
- return mPrint2Protocol->UnicodeBSPrint (StartOfBuffer, BufferSize, FormatString, Marker);
+ return mPrint2SProtocol->UnicodeBSPrint (StartOfBuffer, BufferSize, FormatString, Marker);
}
/**
@@ -537,7 +537,7 @@ UnicodeBSPrintAsciiFormat (
)
{
ASSERT_UNICODE_BUFFER (StartOfBuffer);
- return mPrint2Protocol->UnicodeBSPrintAsciiFormat (StartOfBuffer, BufferSize, FormatString, Marker);
+ return mPrint2SProtocol->UnicodeBSPrintAsciiFormat (StartOfBuffer, BufferSize, FormatString, Marker);
}
/**
@@ -648,7 +648,21 @@ UnicodeValueToString (
IN UINTN Width
)
{
- return mPrint2Protocol->UnicodeValueToString (Buffer, Flags, Value, Width);
+ RETURN_STATUS Status;
+ UINTN BufferSize;
+
+ if (Width == 0) {
+ BufferSize = (MAXIMUM_VALUE_CHARACTERS + 1) * sizeof (CHAR16);
+ } else {
+ BufferSize = (Width + 1) * sizeof (CHAR16);
+ }
+
+ Status = mPrint2SProtocol->UnicodeValueToStringS (Buffer, BufferSize, Flags, Value, Width);
+ if (RETURN_ERROR (Status)) {
+ return 0;
+ }
+
+ return StrnLenS (Buffer, BufferSize / sizeof (CHAR16));
}
/**
@@ -758,7 +772,7 @@ AsciiBSPrint (
IN BASE_LIST Marker
)
{
- return mPrint2Protocol->AsciiBSPrint (StartOfBuffer, BufferSize, FormatString, Marker);
+ return mPrint2SProtocol->AsciiBSPrint (StartOfBuffer, BufferSize, FormatString, Marker);
}
/**
@@ -931,7 +945,7 @@ AsciiBSPrintUnicodeFormat (
)
{
ASSERT_UNICODE_BUFFER (FormatString);
- return mPrint2Protocol->AsciiBSPrintUnicodeFormat (StartOfBuffer, BufferSize, FormatString, Marker);
+ return mPrint2SProtocol->AsciiBSPrintUnicodeFormat (StartOfBuffer, BufferSize, FormatString, Marker);
}
/**
@@ -1042,7 +1056,21 @@ AsciiValueToString (
IN UINTN Width
)
{
- return mPrint2Protocol->AsciiValueToString (Buffer, Flags, Value, Width);
+ RETURN_STATUS Status;
+ UINTN BufferSize;
+
+ if (Width == 0) {
+ BufferSize = (MAXIMUM_VALUE_CHARACTERS + 1) * sizeof (CHAR8);
+ } else {
+ BufferSize = (Width + 1) * sizeof (CHAR8);
+ }
+
+ Status = mPrint2SProtocol->AsciiValueToStringS (Buffer, BufferSize, Flags, Value, Width);
+ if (RETURN_ERROR (Status)) {
+ return 0;
+ }
+
+ return AsciiStrnLenS (Buffer, BufferSize / sizeof (CHAR8));
}
#define PREFIX_SIGN BIT1
--
1.9.5.msysgit.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 4/4] MdeModulePkg/PrintLib: Add safe print functions [A|U]ValueToStringS
2017-02-09 6:02 [PATCH v2 0/4] PrintLib: Add safe print functions [A|U]ValueToStringS Hao Wu
` (2 preceding siblings ...)
2017-02-09 6:02 ` [PATCH v2 3/4] MdeModulePkg/PrintLib: Use EFI_PRINT2S_PROTOCOL for this instance Hao Wu
@ 2017-02-09 6:02 ` Hao Wu
2017-02-20 2:53 ` [PATCH v2 0/4] PrintLib: " Gao, Liming
4 siblings, 0 replies; 6+ messages in thread
From: Hao Wu @ 2017-02-09 6:02 UTC (permalink / raw)
To: edk2-devel; +Cc: Hao Wu, Jiewen Yao, Liming Gao, Michael Kinney
Add the following 2 APIs:
UnicodeValueToStringS
AsciiValueToStringS
These safe version APIs are used to enhance their counterpart (APIs
without trailing 'S' in function names).
They perform checks to the input parameters and will return relative
status to reflect the check result.
Return RETURN_INVALID_PARAMETER when:
1). The input Buffer is NULL.
2). The input BufferSize is greater than (PcdMaximumUnicodeStringLength *
sizeof (CHAR16) + 1) for UnicodeValueToStringS or greater than
PcdMaximumAsciiStringLength for AsciiValueToStringS.
3). The input Flags is not set properly.
4). The input Width is not smaller than MAXIMUM_VALUE_CHARACTERS.
Return RETURN_BUFFER_TOO_SMALL when:
1). The input BufferSize cannot hold the converted value.
These APIs in the MdeModulePkg/DxePrintLibPrint2Protocol instance
follow the same rules with MdePkg/BasePrintLib.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
---
MdeModulePkg/Library/DxePrintLibPrint2Protocol/PrintLib.c | 127 ++++++++++++++++++++
1 file changed, 127 insertions(+)
diff --git a/MdeModulePkg/Library/DxePrintLibPrint2Protocol/PrintLib.c b/MdeModulePkg/Library/DxePrintLibPrint2Protocol/PrintLib.c
index b3e7cb2..589d4db 100644
--- a/MdeModulePkg/Library/DxePrintLibPrint2Protocol/PrintLib.c
+++ b/MdeModulePkg/Library/DxePrintLibPrint2Protocol/PrintLib.c
@@ -666,6 +666,70 @@ UnicodeValueToString (
}
/**
+ Converts a decimal value to a Null-terminated Unicode string.
+
+ Converts the decimal number specified by Value to a Null-terminated Unicode
+ string specified by Buffer containing at most Width characters. No padding of
+ spaces is ever performed. If Width is 0 then a width of
+ MAXIMUM_VALUE_CHARACTERS is assumed. If the conversion contains more than
+ Width characters, then only the first Width characters are placed in Buffer.
+ Additional conversion parameters are specified in Flags.
+
+ The Flags bit LEFT_JUSTIFY is always ignored.
+ All conversions are left justified in Buffer.
+ If Width is 0, PREFIX_ZERO is ignored in Flags.
+ If COMMA_TYPE is set in Flags, then PREFIX_ZERO is ignored in Flags, and
+ commas are inserted every 3rd digit starting from the right.
+ If RADIX_HEX is set in Flags, then the output buffer will be formatted in
+ hexadecimal format.
+ If Value is < 0 and RADIX_HEX is not set in Flags, then the fist character in
+ Buffer is a '-'.
+ If PREFIX_ZERO is set in Flags and PREFIX_ZERO is not being ignored, then
+ Buffer is padded with '0' characters so the combination of the optional '-'
+ sign character, '0' characters, digit characters for Value, and the
+ Null-terminator add up to Width characters.
+
+ If Buffer is not aligned on a 16-bit boundary, then ASSERT().
+ If an error would be returned, then the function will also ASSERT().
+
+ @param Buffer The pointer to the output buffer for the produced
+ Null-terminated Unicode string.
+ @param BufferSize The size of Buffer in bytes, including the
+ Null-terminator.
+ @param Flags The bitmask of flags that specify left justification,
+ zero pad, and commas.
+ @param Value The 64-bit signed value to convert to a string.
+ @param Width The maximum number of Unicode characters to place in
+ Buffer, not including the Null-terminator.
+
+ @retval RETURN_SUCCESS The decimal value is converted.
+ @retval RETURN_BUFFER_TOO_SMALL If BufferSize cannot hold the converted
+ value.
+ @retval RETURN_INVALID_PARAMETER If Buffer is NULL.
+ If PcdMaximumUnicodeStringLength is not
+ zero, and BufferSize is greater than
+ (PcdMaximumUnicodeStringLength *
+ sizeof (CHAR16) + 1).
+ If unsupported bits are set in Flags.
+ If both COMMA_TYPE and RADIX_HEX are set in
+ Flags.
+ If Width >= MAXIMUM_VALUE_CHARACTERS.
+
+**/
+RETURN_STATUS
+EFIAPI
+UnicodeValueToStringS (
+ IN OUT CHAR16 *Buffer,
+ IN UINTN BufferSize,
+ IN UINTN Flags,
+ IN INT64 Value,
+ IN UINTN Width
+ )
+{
+ return mPrint2SProtocol->UnicodeValueToStringS (Buffer, BufferSize, Flags, Value, Width);
+}
+
+/**
Produces a Null-terminated ASCII string in an output buffer based on a Null-terminated
ASCII format string and a VA_LIST argument list.
@@ -1073,6 +1137,69 @@ AsciiValueToString (
return AsciiStrnLenS (Buffer, BufferSize / sizeof (CHAR8));
}
+/**
+ Converts a decimal value to a Null-terminated Ascii string.
+
+ Converts the decimal number specified by Value to a Null-terminated Ascii
+ string specified by Buffer containing at most Width characters. No padding of
+ spaces is ever performed. If Width is 0 then a width of
+ MAXIMUM_VALUE_CHARACTERS is assumed. If the conversion contains more than
+ Width characters, then only the first Width characters are placed in Buffer.
+ Additional conversion parameters are specified in Flags.
+
+ The Flags bit LEFT_JUSTIFY is always ignored.
+ All conversions are left justified in Buffer.
+ If Width is 0, PREFIX_ZERO is ignored in Flags.
+ If COMMA_TYPE is set in Flags, then PREFIX_ZERO is ignored in Flags, and
+ commas are inserted every 3rd digit starting from the right.
+ If RADIX_HEX is set in Flags, then the output buffer will be formatted in
+ hexadecimal format.
+ If Value is < 0 and RADIX_HEX is not set in Flags, then the fist character in
+ Buffer is a '-'.
+ If PREFIX_ZERO is set in Flags and PREFIX_ZERO is not being ignored, then
+ Buffer is padded with '0' characters so the combination of the optional '-'
+ sign character, '0' characters, digit characters for Value, and the
+ Null-terminator add up to Width characters.
+
+ If Buffer is not aligned on a 16-bit boundary, then ASSERT().
+ If an error would be returned, then the function will also ASSERT().
+
+ @param Buffer The pointer to the output buffer for the produced
+ Null-terminated Ascii string.
+ @param BufferSize The size of Buffer in bytes, including the
+ Null-terminator.
+ @param Flags The bitmask of flags that specify left justification,
+ zero pad, and commas.
+ @param Value The 64-bit signed value to convert to a string.
+ @param Width The maximum number of Ascii characters to place in
+ Buffer, not including the Null-terminator.
+
+ @retval RETURN_SUCCESS The decimal value is converted.
+ @retval RETURN_BUFFER_TOO_SMALL If BufferSize cannot hold the converted
+ value.
+ @retval RETURN_INVALID_PARAMETER If Buffer is NULL.
+ If PcdMaximumAsciiStringLength is not
+ zero, and BufferSize is greater than
+ PcdMaximumAsciiStringLength.
+ If unsupported bits are set in Flags.
+ If both COMMA_TYPE and RADIX_HEX are set in
+ Flags.
+ If Width >= MAXIMUM_VALUE_CHARACTERS.
+
+**/
+RETURN_STATUS
+EFIAPI
+AsciiValueToStringS (
+ IN OUT CHAR8 *Buffer,
+ IN UINTN BufferSize,
+ IN UINTN Flags,
+ IN INT64 Value,
+ IN UINTN Width
+ )
+{
+ return mPrint2SProtocol->AsciiValueToStringS (Buffer, BufferSize, Flags, Value, Width);
+}
+
#define PREFIX_SIGN BIT1
#define PREFIX_BLANK BIT2
#define LONG_TYPE BIT4
--
1.9.5.msysgit.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 0/4] PrintLib: Add safe print functions [A|U]ValueToStringS
2017-02-09 6:02 [PATCH v2 0/4] PrintLib: Add safe print functions [A|U]ValueToStringS Hao Wu
` (3 preceding siblings ...)
2017-02-09 6:02 ` [PATCH v2 4/4] MdeModulePkg/PrintLib: Add safe print functions [A|U]ValueToStringS Hao Wu
@ 2017-02-20 2:53 ` Gao, Liming
4 siblings, 0 replies; 6+ messages in thread
From: Gao, Liming @ 2017-02-20 2:53 UTC (permalink / raw)
To: Wu, Hao A, edk2-devel@lists.01.org; +Cc: Yao, Jiewen, Kinney, Michael D
Reviewed-by: Liming Gao <liming.gao@intel.com>
>-----Original Message-----
>From: Wu, Hao A
>Sent: Thursday, February 09, 2017 2:03 PM
>To: edk2-devel@lists.01.org
>Cc: Wu, Hao A <hao.a.wu@intel.com>; Yao, Jiewen <jiewen.yao@intel.com>;
>Gao, Liming <liming.gao@intel.com>; Kinney, Michael D
><michael.d.kinney@intel.com>
>Subject: [PATCH v2 0/4] PrintLib: Add safe print functions
>[A|U]ValueToStringS
>
>V2 changes:
>Add the EFI_PRINT2S_PROTOCOL as a safe version of the
>EFI_PRINT2_PROTOCOL,
>the new protocol replaces the following 2 services in EFI_PRINT2_PROTOCOL:
>UNICODE_VALUE_TO_STRING
>ASCII_VALUE_TO_STRING
>with:
>UNICODE_VALUE_TO_STRING_S
>ASCII_VALUE_TO_STRING_S
>
>Now, the PrintLib instance MdeModulePkg/Library/DxePrintLibPrint2Protocol
>will use EFI_PRINT2S_PROTOCOL instead of EFI_PRINT2_PROTOCOL to
>implement
>its APIs.
>
>
>V1 history:
>Add the following 2 safe print functions in PrintLib:
>UnicodeValueToStringS
>AsciiValueToStringS
>
>Cc: Jiewen Yao <jiewen.yao@intel.com>
>Cc: Liming Gao <liming.gao@intel.com>
>Cc: Michael Kinney <michael.d.kinney@intel.com>
>
>
>Hao Wu (4):
> MdePkg/BasePrintLib: Add safe print functions [A|U]ValueToStringS
> MdeModulePkg: Add the EFI_PRINT2S_PROTOCOL
> MdeModulePkg/PrintLib: Use EFI_PRINT2S_PROTOCOL for this instance
> MdeModulePkg/PrintLib: Add safe print functions [A|U]ValueToStringS
>
> MdeModulePkg/Include/Protocol/Print2.h | 150
>+++++++++++++-
>
>MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.
>inf | 4 +-
>
>MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.
>uni | 10 +-
> MdeModulePkg/Library/DxePrintLibPrint2Protocol/PrintLib.c | 183
>++++++++++++++++--
> MdeModulePkg/MdeModulePkg.dec | 3 +-
> MdeModulePkg/Universal/PrintDxe/Print.c | 18 +-
> MdeModulePkg/Universal/PrintDxe/PrintDxe.inf | 7 +-
> MdeModulePkg/Universal/PrintDxe/PrintDxe.uni | 10 +-
> MdePkg/Include/Library/PrintLib.h | 121
>++++++++++++
> MdePkg/Library/BasePrintLib/PrintLib.c | 128
>++++++++++++
> MdePkg/Library/BasePrintLib/PrintLibInternal.c | 204
>++++++++++++++++++++
> MdePkg/Library/BasePrintLib/PrintLibInternal.h | 61 ++++++
> 12 files changed, 865 insertions(+), 34 deletions(-)
>
>--
>1.9.5.msysgit.0
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-02-20 2:53 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-02-09 6:02 [PATCH v2 0/4] PrintLib: Add safe print functions [A|U]ValueToStringS Hao Wu
2017-02-09 6:02 ` [PATCH v2 1/4] MdePkg/BasePrintLib: " Hao Wu
2017-02-09 6:02 ` [PATCH v2 2/4] MdeModulePkg: Add the EFI_PRINT2S_PROTOCOL Hao Wu
2017-02-09 6:02 ` [PATCH v2 3/4] MdeModulePkg/PrintLib: Use EFI_PRINT2S_PROTOCOL for this instance Hao Wu
2017-02-09 6:02 ` [PATCH v2 4/4] MdeModulePkg/PrintLib: Add safe print functions [A|U]ValueToStringS Hao Wu
2017-02-20 2:53 ` [PATCH v2 0/4] PrintLib: " Gao, Liming
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox