* [patch] NetworkPkg: Add check logic for some variable in iSCSI driver.
@ 2017-02-24 6:26 Zhang Lubo
0 siblings, 0 replies; only message in thread
From: Zhang Lubo @ 2017-02-24 6:26 UTC (permalink / raw)
To: edk2-devel; +Cc: Ye Ting, Fu Siyuan, Wu Jiaxin
Add check logic for some attempt variable to enhance code in iSCSI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
---
NetworkPkg/IScsiDxe/IScsiConfig.c | 75 +++++++++++++++++++++------------------
1 file changed, 41 insertions(+), 34 deletions(-)
diff --git a/NetworkPkg/IScsiDxe/IScsiConfig.c b/NetworkPkg/IScsiDxe/IScsiConfig.c
index b169620..f8c0a61 100644
--- a/NetworkPkg/IScsiDxe/IScsiConfig.c
+++ b/NetworkPkg/IScsiDxe/IScsiConfig.c
@@ -628,37 +628,42 @@ IScsiConvertAttemptConfigDataToIfrNvDataByKeyword (
ISCSI_SESSION_CONFIG_NVDATA *SessionConfigData;
ISCSI_CHAP_AUTH_CONFIG_NVDATA *AuthConfigData;
CHAR16 AttemptNameList[ATTEMPT_NAME_LIST_SIZE];
EFI_IP_ADDRESS Ip;
UINTN Index;
+ UINTN StringLen;
ZeroMem (AttemptNameList, sizeof (AttemptNameList));
NET_LIST_FOR_EACH (Entry, &mPrivate->AttemptConfigs) {
Attempt = NET_LIST_USER_STRUCT (Entry, ISCSI_ATTEMPT_CONFIG_NVDATA, Link);
//
// Normal session configuration parameters.
//
SessionConfigData = &Attempt->SessionConfigData;
+ ASSERT ((Attempt->AttemptConfigIndex > 0) && (Attempt->AttemptConfigIndex <= FixedPcdGet8 (PcdMaxIScsiAttemptNumber)));
Index = Attempt->AttemptConfigIndex - 1;
//
// Save the attempt to AttemptNameList as Attempt:1 Attempt:2
//
AsciiStrToUnicodeStrS (
Attempt->AttemptName,
AttemptNameList + StrLen (AttemptNameList),
- ATTEMPT_NAME_LIST_SIZE
+ ATTEMPT_NAME_LIST_SIZE - StrLen (AttemptNameList)
);
- *(AttemptNameList + StrLen (AttemptNameList) - 2) = L':';
- *(AttemptNameList + StrLen (AttemptNameList)) = L' ';
+
+ StringLen = StrLen (AttemptNameList);
+ ASSERT (StringLen > 2);
+ *(AttemptNameList + StringLen - 2) = L':';
+ *(AttemptNameList + StringLen) = L' ';
AsciiStrToUnicodeStrS (
Attempt->AttemptName,
IfrNvData->ISCSIAttemptName + ATTEMPT_NAME_SIZE * Index,
- ATTEMPT_NAME_SIZE
+ ATTEMPT_NAME_LIST_SIZE - ATTEMPT_NAME_SIZE * Index
);
IfrNvData->ISCSIBootEnableList[Index] = SessionConfigData->Enabled;
IfrNvData->ISCSIIpAddressTypeList[Index] = SessionConfigData->IpMode;
@@ -1199,10 +1204,11 @@ IScsiConvertlfrNvDataToAttemptConfigDataByKeyword (
EFI_IP_ADDRESS Gateway;
EFI_INPUT_KEY Key;
UINT64 Lun;
EFI_STATUS Status;
+ Attempt = NULL;
ZeroMem (IScsiName, sizeof (IScsiName));
if (OffSet < ATTEMPT_BOOTENABLE_VAR_OFFSET) {
return EFI_SUCCESS;
@@ -1726,11 +1732,11 @@ IScsiConvertlfrNvDataToAttemptConfigDataByKeyword (
//
// Record the user configuration information in NVR.
//
-
+ ASSERT (Attempt != NULL);
UnicodeSPrint (mPrivate->PortString, (UINTN) ISCSI_NAME_IFR_MAX_SIZE, L"Attempt %d", Attempt->AttemptConfigIndex);
return gRT->SetVariable (
mPrivate->PortString,
&gEfiIScsiInitiatorNameProtocolGuid,
ISCSI_CONFIG_VAR_ATTR,
@@ -2705,10 +2711,11 @@ IScsiConfigProcessDefault (
UINT8 *AttemptConfigOrder;
UINTN AttemptConfigOrderSize;
UINTN Index;
EFI_INPUT_KEY Key;
+ AttemptConfigData = NULL;
//
// Is User creating a new attempt?
//
NewAttempt = FALSE;
@@ -2749,41 +2756,40 @@ IScsiConfigProcessDefault (
L"InitialAttemptOrder",
&gIScsiConfigGuid,
&AttemptConfigOrderSize
);
- if (AttemptConfigOrder != NULL) {
-
- for (Index = 0; Index < AttemptConfigOrderSize / sizeof (UINT8); Index++) {
- UnicodeSPrint (
- mPrivate->PortString,
- (UINTN) ISCSI_NAME_IFR_MAX_SIZE,
- L"Attempt %d",
- (UINTN) AttemptConfigOrder[Index]
- );
- GetVariable2 (
- mPrivate->PortString,
- &gEfiIScsiInitiatorNameProtocolGuid,
- (VOID**)&AttemptConfigData,
- NULL
- );
- if (AttemptConfigData == NULL || AttemptConfigData->Actived == ISCSI_ACTIVE_ENABLED) {
- continue;
- }
-
- break;
- }
+ ASSERT (AttemptConfigOrder != NULL);
- if (Index > PcdGet8 (PcdMaxIScsiAttemptNumber)) {
- CreatePopUp (
- EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
- &Key,
- L"Can not create more attempts, Please configure the PcdMaxIScsiAttemptNumber if needed!",
- NULL
- );
- return EFI_UNSUPPORTED;
+ for (Index = 0; Index < AttemptConfigOrderSize / sizeof (UINT8); Index++) {
+ UnicodeSPrint (
+ mPrivate->PortString,
+ (UINTN) ISCSI_NAME_IFR_MAX_SIZE,
+ L"Attempt %d",
+ (UINTN) AttemptConfigOrder[Index]
+ );
+ GetVariable2 (
+ mPrivate->PortString,
+ &gEfiIScsiInitiatorNameProtocolGuid,
+ (VOID**)&AttemptConfigData,
+ NULL
+ );
+ if (AttemptConfigData == NULL || AttemptConfigData->Actived == ISCSI_ACTIVE_ENABLED) {
+ continue;
}
+
+ break;
+ }
+
+ if (Index > PcdGet8 (PcdMaxIScsiAttemptNumber)) {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Can not create more attempts, Please configure the PcdMaxIScsiAttemptNumber if needed!",
+ NULL
+ );
+ return EFI_UNSUPPORTED;
}
if (AttemptConfigOrder != NULL) {
FreePool (AttemptConfigOrder);
}
@@ -2796,10 +2802,11 @@ IScsiConfigProcessDefault (
NicInfo->HwAddressSize,
NicInfo->VlanId,
MacString
);
+ ASSERT (AttemptConfigData != NULL);
UnicodeStrToAsciiStrS (MacString, AttemptConfigData->MacString, sizeof (AttemptConfigData->MacString));
AttemptConfigData->NicIndex = NicIndex;
AttemptConfigData->Actived = ISCSI_ACTIVE_ENABLED;
//
--
1.9.5.msysgit.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2017-02-24 6:27 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-02-24 6:26 [patch] NetworkPkg: Add check logic for some variable in iSCSI driver Zhang Lubo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox