From: Jiaxin Wu <jiaxin.wu@intel.com>
To: edk2-devel@lists.01.org
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>,
Subramanian Sriram <sriram-s@hpe.com>,
Ye Ting <ting.ye@intel.com>, Fu Siyuan <siyuan.fu@intel.com>,
Wu Jiaxin <jiaxin.wu@intel.com>
Subject: [Patch] MdeModulePkg/Ip4Dxe: Add Ip/Netmask pair check for Ip4Config2
Date: Thu, 16 Mar 2017 09:40:58 +0800 [thread overview]
Message-ID: <1489628458-16580-1-git-send-email-jiaxin.wu@intel.com> (raw)
Ip4config2 manual address setting doesn't check the validity
of Ip/Netmask pair, which leads to the invalid combination of
Ip and Netmask setting. This patch is to resolve this issue.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
---
MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Common.c | 62 +++++++++++++++++++++-
MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Common.h | 21 +++++++-
.../Universal/Network/Ip4Dxe/Ip4Config2Impl.c | 5 +-
MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c | 62 +---------------------
4 files changed, 86 insertions(+), 64 deletions(-)
diff --git a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Common.c b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Common.c
index 004a8bc..7c7d182 100644
--- a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Common.c
+++ b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Common.c
@@ -1,8 +1,8 @@
/** @file
-Copyright (c) 2005 - 2014, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2005 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
@@ -265,5 +265,65 @@ Ip4NtohHead (
Head->Src = NTOHL (Head->Src);
Head->Dst = NTOHL (Head->Dst);
return Head;
}
+
+
+/**
+ Validate that Ip/Netmask pair is OK to be used as station
+ address. Only continuous netmasks are supported. and check
+ that StationAddress is a unicast address on the newtwork.
+
+ @param[in] Ip The IP address to validate.
+ @param[in] Netmask The netmaks of the IP.
+
+ @retval TRUE The Ip/Netmask pair is valid.
+ @retval FALSE The Ip/Netmask pair is invalid.
+
+**/
+BOOLEAN
+Ip4StationAddressValid (
+ IN IP4_ADDR Ip,
+ IN IP4_ADDR Netmask
+ )
+{
+ IP4_ADDR NetBrdcastMask;
+ INTN Len;
+ INTN Type;
+
+ //
+ // Only support the station address with 0.0.0.0/0 to enable DHCP client.
+ //
+ if (Netmask == IP4_ALLZERO_ADDRESS) {
+ return (BOOLEAN) (Ip == IP4_ALLZERO_ADDRESS);
+ }
+
+ //
+ // Only support the continuous net masks
+ //
+ if ((Len = NetGetMaskLength (Netmask)) == (IP4_MASK_MAX + 1)) {
+ return FALSE;
+ }
+
+ //
+ // Station address can't be class D or class E address
+ //
+ if ((Type = NetGetIpClass (Ip)) > IP4_ADDR_CLASSC) {
+ return FALSE;
+ }
+
+ //
+ // Station address can't be subnet broadcast/net broadcast address
+ //
+ if ((Ip == (Ip & Netmask)) || (Ip == (Ip | ~Netmask))) {
+ return FALSE;
+ }
+
+ NetBrdcastMask = gIp4AllMasks[MIN (Len, Type << 3)];
+
+ if (Ip == (Ip | ~NetBrdcastMask)) {
+ return FALSE;
+ }
+
+ return TRUE;
+}
\ No newline at end of file
diff --git a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Common.h b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Common.h
index d38857c..9689f37 100644
--- a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Common.h
+++ b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Common.h
@@ -1,9 +1,9 @@
/** @file
Common definition for IP4.
-Copyright (c) 2005 - 2014, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2005 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
@@ -199,6 +199,25 @@ Ip4GetMulticastMac (
IP4_HEAD *
Ip4NtohHead (
IN IP4_HEAD *Head
);
+
+/**
+ Validate that Ip/Netmask pair is OK to be used as station
+ address. Only continuous netmasks are supported. and check
+ that StationAddress is a unicast address on the newtwork.
+
+ @param[in] Ip The IP address to validate.
+ @param[in] Netmask The netmaks of the IP.
+
+ @retval TRUE The Ip/Netmask pair is valid.
+ @retval FALSE The Ip/Netmask pair is invalid.
+
+**/
+BOOLEAN
+Ip4StationAddressValid (
+ IN IP4_ADDR Ip,
+ IN IP4_ADDR Netmask
+ );
+
#endif
diff --git a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Config2Impl.c b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Config2Impl.c
index 6c7ac68..a5191d1 100644
--- a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Config2Impl.c
+++ b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Config2Impl.c
@@ -1250,11 +1250,14 @@ Ip4Config2SetMaunualAddress (
NewAddress = *((EFI_IP4_CONFIG2_MANUAL_ADDRESS *) Data);
StationAddress = EFI_NTOHL (NewAddress.Address);
SubnetMask = EFI_NTOHL (NewAddress.SubnetMask);
- if (NetGetMaskLength (SubnetMask) == IP4_MASK_NUM) {
+ //
+ // Check whether the StationAddress/SubnetMask pair is valid.
+ //
+ if (!Ip4StationAddressValid (StationAddress, SubnetMask)) {
return EFI_INVALID_PARAMETER;
}
//
// Store the new data, and init the DataItem status to EFI_NOT_READY because
diff --git a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c
index 91f1a67..5aa3ea1 100644
--- a/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c
+++ b/MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Impl.c
@@ -1,8 +1,8 @@
/** @file
-Copyright (c) 2005 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2005 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
@@ -808,70 +808,10 @@ Ip4CleanProtocol (
return EFI_SUCCESS;
}
/**
- Validate that Ip/Netmask pair is OK to be used as station
- address. Only continuous netmasks are supported. and check
- that StationAddress is a unicast address on the newtwork.
-
- @param[in] Ip The IP address to validate.
- @param[in] Netmask The netmaks of the IP.
-
- @retval TRUE The Ip/Netmask pair is valid.
- @retval FALSE The Ip/Netmask pair is invalid.
-
-**/
-BOOLEAN
-Ip4StationAddressValid (
- IN IP4_ADDR Ip,
- IN IP4_ADDR Netmask
- )
-{
- IP4_ADDR NetBrdcastMask;
- INTN Len;
- INTN Type;
-
- //
- // Only support the station address with 0.0.0.0/0 to enable DHCP client.
- //
- if (Netmask == IP4_ALLZERO_ADDRESS) {
- return (BOOLEAN) (Ip == IP4_ALLZERO_ADDRESS);
- }
-
- //
- // Only support the continuous net masks
- //
- if ((Len = NetGetMaskLength (Netmask)) == (IP4_MASK_MAX + 1)) {
- return FALSE;
- }
-
- //
- // Station address can't be class D or class E address
- //
- if ((Type = NetGetIpClass (Ip)) > IP4_ADDR_CLASSC) {
- return FALSE;
- }
-
- //
- // Station address can't be subnet broadcast/net broadcast address
- //
- if ((Ip == (Ip & Netmask)) || (Ip == (Ip | ~Netmask))) {
- return FALSE;
- }
-
- NetBrdcastMask = gIp4AllMasks[MIN (Len, Type << 3)];
-
- if (Ip == (Ip | ~NetBrdcastMask)) {
- return FALSE;
- }
-
- return TRUE;
-}
-
-
-/**
Assigns an IPv4 address and subnet mask to this EFI IPv4 Protocol driver instance.
The Configure() function is used to set, change, or reset the operational
parameters and filter settings for this EFI IPv4 Protocol instance. Until these
parameters have been set, no network traffic can be sent or received by this
--
1.9.5.msysgit.1
next reply other threads:[~2017-03-16 1:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-16 1:40 Jiaxin Wu [this message]
2017-03-16 3:13 ` [Patch] MdeModulePkg/Ip4Dxe: Add Ip/Netmask pair check for Ip4Config2 Hegde, Nagaraj P
2017-03-16 4:39 ` Hegde, Nagaraj P
2017-03-16 5:24 ` Wu, Jiaxin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489628458-16580-1-git-send-email-jiaxin.wu@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox