From: Dandan Bi <dandan.bi@intel.com>
To: edk2-devel@lists.01.org
Cc: Eric Dong <eric.dong@intel.com>,
Liming Gao <liming.gao@intel.com>, Hao Wu <hao.a.wu@intel.com>
Subject: [patch] MdeModulePkg/HiiDB: Avoid incorrect results of multiplication
Date: Wed, 12 Apr 2017 15:08:51 +0800 [thread overview]
Message-ID: <1491980931-115060-1-git-send-email-dandan.bi@intel.com> (raw)
An example:
The codes in function Output8bitPixel in Image.c:
OffsetY = BITMAP_LEN_8_BIT ((UINT32) Image->Width, Ypos);
Both Image->Width and Ypos are of type UINT16. They will be promoted to
int (signed) first, and then perform the multiplication defined by macro
BITMAP_LEN_8_BIT. If the result of multiplication between Image->Width and
Ypos exceeds the range of type int, a potential incorrect results
will be assigned to OffsetY.
This commit adds explicit UINT32 type cast for 'Image->Width' to avoid
possible overflow in the int range. And also fix similar issues in
HiiDatabase.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
---
MdeModulePkg/Universal/HiiDatabaseDxe/Image.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/MdeModulePkg/Universal/HiiDatabaseDxe/Image.c b/MdeModulePkg/Universal/HiiDatabaseDxe/Image.c
index e2fa16e..431a5b8 100644
--- a/MdeModulePkg/Universal/HiiDatabaseDxe/Image.c
+++ b/MdeModulePkg/Universal/HiiDatabaseDxe/Image.c
@@ -103,21 +103,21 @@ GetImageIdOrAddress (
case EFI_HII_IIBT_IMAGE_8BIT:
case EFI_HII_IIBT_IMAGE_8BIT_TRANS:
Length = sizeof (EFI_HII_IIBT_IMAGE_8BIT_BLOCK) - sizeof (UINT8) +
BITMAP_LEN_8_BIT (
- ReadUnaligned16 (&((EFI_HII_IIBT_IMAGE_8BIT_BLOCK *) CurrentImageBlock)->Bitmap.Width),
+ (UINT32) ReadUnaligned16 (&((EFI_HII_IIBT_IMAGE_8BIT_BLOCK *) CurrentImageBlock)->Bitmap.Width),
ReadUnaligned16 (&((EFI_HII_IIBT_IMAGE_8BIT_BLOCK *) CurrentImageBlock)->Bitmap.Height)
);
ImageIdCurrent++;
break;
case EFI_HII_IIBT_IMAGE_24BIT:
case EFI_HII_IIBT_IMAGE_24BIT_TRANS:
Length = sizeof (EFI_HII_IIBT_IMAGE_24BIT_BLOCK) - sizeof (EFI_HII_RGB_PIXEL) +
BITMAP_LEN_24_BIT (
- ReadUnaligned16 ((VOID *) &((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) CurrentImageBlock)->Bitmap.Width),
+ (UINT32) ReadUnaligned16 ((VOID *) &((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) CurrentImageBlock)->Bitmap.Width),
ReadUnaligned16 ((VOID *) &((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) CurrentImageBlock)->Bitmap.Height)
);
ImageIdCurrent++;
break;
@@ -451,11 +451,11 @@ Output8bitPixel (
//
// Convert the pixel from 8 bits to corresponding color.
//
for (Ypos = 0; Ypos < Image->Height; Ypos++) {
- OffsetY = BITMAP_LEN_8_BIT (Image->Width, Ypos);
+ OffsetY = BITMAP_LEN_8_BIT ((UINT32) Image->Width, Ypos);
//
// All bits are meaningful since the bitmap is 8 bits per pixel.
//
for (Xpos = 0; Xpos < Image->Width; Xpos++) {
Byte = *(Data + OffsetY + Xpos);
@@ -491,11 +491,11 @@ Output24bitPixel (
ASSERT (Image != NULL && Data != NULL);
BitMapPtr = Image->Bitmap;
for (Ypos = 0; Ypos < Image->Height; Ypos++) {
- OffsetY = BITMAP_LEN_8_BIT (Image->Width, Ypos);
+ OffsetY = BITMAP_LEN_8_BIT ((UINT32) Image->Width, Ypos);
CopyRgbToGopPixel (&BitMapPtr[OffsetY], &Data[OffsetY], Image->Width);
}
}
@@ -648,11 +648,11 @@ HiiNewImage (
if (PackageListNode == NULL) {
return EFI_NOT_FOUND;
}
NewBlockSize = sizeof (EFI_HII_IIBT_IMAGE_24BIT_BLOCK) - sizeof (EFI_HII_RGB_PIXEL) +
- BITMAP_LEN_24_BIT (Image->Width, Image->Height);
+ BITMAP_LEN_24_BIT ((UINT32) Image->Width, Image->Height);
//
// Get the image package in the package list,
// or create a new image package if image package does not exist.
//
@@ -751,11 +751,11 @@ HiiNewImage (
} else {
ImageBlocks->BlockType = EFI_HII_IIBT_IMAGE_24BIT;
}
WriteUnaligned16 ((VOID *) &((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) ImageBlocks)->Bitmap.Width, Image->Width);
WriteUnaligned16 ((VOID *) &((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) ImageBlocks)->Bitmap.Height, Image->Height);
- CopyGopToRgbPixel (((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) ImageBlocks)->Bitmap.Bitmap, Image->Bitmap, Image->Width * Image->Height);
+ CopyGopToRgbPixel (((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) ImageBlocks)->Bitmap.Bitmap, Image->Bitmap, (UINT32) Image->Width * Image->Height);
//
// Append the block end
//
ImageBlocks = (EFI_HII_IMAGE_BLOCK *) ((UINT8 *) ImageBlocks + NewBlockSize);
@@ -894,11 +894,11 @@ IGetImage (
//
// Use the common block code since the definition of these structures is the same.
//
CopyMem (&Iibt1bit, CurrentImageBlock, sizeof (EFI_HII_IIBT_IMAGE_1BIT_BLOCK));
ImageLength = sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL) *
- (Iibt1bit.Bitmap.Width * Iibt1bit.Bitmap.Height);
+ ((UINT32) Iibt1bit.Bitmap.Width * Iibt1bit.Bitmap.Height);
Image->Bitmap = AllocateZeroPool (ImageLength);
if (Image->Bitmap == NULL) {
return EFI_OUT_OF_RESOURCES;
}
@@ -945,11 +945,11 @@ IGetImage (
// fall through
//
case EFI_HII_IIBT_IMAGE_24BIT:
Width = ReadUnaligned16 ((VOID *) &((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) CurrentImageBlock)->Bitmap.Width);
Height = ReadUnaligned16 ((VOID *) &((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) CurrentImageBlock)->Bitmap.Height);
- ImageLength = sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL) * (Width * Height);
+ ImageLength = sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL) * ((UINT32) Width * Height);
Image->Bitmap = AllocateZeroPool (ImageLength);
if (Image->Bitmap == NULL) {
return EFI_OUT_OF_RESOURCES;
}
@@ -1093,19 +1093,19 @@ HiiSetImage (
break;
case EFI_HII_IIBT_IMAGE_8BIT:
case EFI_HII_IIBT_IMAGE_8BIT_TRANS:
OldBlockSize = sizeof (EFI_HII_IIBT_IMAGE_8BIT_BLOCK) - sizeof (UINT8) +
BITMAP_LEN_8_BIT (
- ReadUnaligned16 (&((EFI_HII_IIBT_IMAGE_8BIT_BLOCK *) CurrentImageBlock)->Bitmap.Width),
+ (UINT32) ReadUnaligned16 (&((EFI_HII_IIBT_IMAGE_8BIT_BLOCK *) CurrentImageBlock)->Bitmap.Width),
ReadUnaligned16 (&((EFI_HII_IIBT_IMAGE_8BIT_BLOCK *) CurrentImageBlock)->Bitmap.Height)
);
break;
case EFI_HII_IIBT_IMAGE_24BIT:
case EFI_HII_IIBT_IMAGE_24BIT_TRANS:
OldBlockSize = sizeof (EFI_HII_IIBT_IMAGE_24BIT_BLOCK) - sizeof (EFI_HII_RGB_PIXEL) +
BITMAP_LEN_24_BIT (
- ReadUnaligned16 ((VOID *) &((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) CurrentImageBlock)->Bitmap.Width),
+ (UINT32) ReadUnaligned16 ((VOID *) &((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) CurrentImageBlock)->Bitmap.Width),
ReadUnaligned16 ((VOID *) &((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) CurrentImageBlock)->Bitmap.Height)
);
break;
default:
return EFI_NOT_FOUND;
@@ -1113,11 +1113,11 @@ HiiSetImage (
//
// Create the new image block according to input image.
//
NewBlockSize = sizeof (EFI_HII_IIBT_IMAGE_24BIT_BLOCK) - sizeof (EFI_HII_RGB_PIXEL) +
- BITMAP_LEN_24_BIT (Image->Width, Image->Height);
+ BITMAP_LEN_24_BIT ((UINT32) Image->Width, Image->Height);
//
// Adjust the image package to remove the original block firstly then add the new block.
//
ImageBlocks = AllocateZeroPool (ImagePackage->ImageBlockSize + NewBlockSize - OldBlockSize);
if (ImageBlocks == NULL) {
@@ -1138,11 +1138,11 @@ HiiSetImage (
NewImageBlock->BlockType = EFI_HII_IIBT_IMAGE_24BIT;
}
WriteUnaligned16 ((VOID *) &((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) NewImageBlock)->Bitmap.Width, Image->Width);
WriteUnaligned16 ((VOID *) &((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) NewImageBlock)->Bitmap.Height, Image->Height);
CopyGopToRgbPixel (((EFI_HII_IIBT_IMAGE_24BIT_BLOCK *) NewImageBlock)->Bitmap.Bitmap,
- Image->Bitmap, Image->Width * Image->Height);
+ Image->Bitmap, (UINT32) Image->Width * Image->Height);
CopyMem ((UINT8 *) NewImageBlock + NewBlockSize, (UINT8 *) CurrentImageBlock + OldBlockSize, Part2Size);
FreePool (ImagePackage->ImageBlock);
ImagePackage->ImageBlock = ImageBlocks;
--
1.9.5.msysgit.1
next reply other threads:[~2017-04-12 7:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-12 7:08 Dandan Bi [this message]
2017-04-13 1:47 ` [patch] MdeModulePkg/HiiDB: Avoid incorrect results of multiplication Wu, Hao A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491980931-115060-1-git-send-email-dandan.bi@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox