From: Fu Siyuan <siyuan.fu@intel.com>
To: edk2-devel@lists.01.org
Cc: Wu Jiaxin <jiaxin.wu@intel.com>,
Andrey Tepin <atepin@kraftway.ru>, Ye Ting <ting.ye@intel.com>
Subject: [Patch V2] NetworkPkg: Addressing TCP Window Retraction when window scale factor is used.
Date: Fri, 5 May 2017 09:56:05 +0800 [thread overview]
Message-ID: <1493949365-105904-2-git-send-email-siyuan.fu@intel.com> (raw)
In-Reply-To: <1493949365-105904-1-git-send-email-siyuan.fu@intel.com>
The RFC1323 which defines the TCP window scale option has been obsoleted by RFC7323.
This patch is to follow the RFC7323 to address the TCP window retraction problem
when a non-zero scale factor is used.
The changes has been test in high packet loss rate network by using HTTP boot and
iSCSI file read/write.
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Andrey Tepin <atepin@kraftway.ru>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
---
NetworkPkg/TcpDxe/TcpMisc.c | 3 ++-
NetworkPkg/TcpDxe/TcpOutput.c | 33 ++++++++++++++++++++++++++++-----
NetworkPkg/TcpDxe/TcpProto.h | 8 +++++++-
3 files changed, 37 insertions(+), 7 deletions(-)
diff --git a/NetworkPkg/TcpDxe/TcpMisc.c b/NetworkPkg/TcpDxe/TcpMisc.c
index a8592c9..4435036 100644
--- a/NetworkPkg/TcpDxe/TcpMisc.c
+++ b/NetworkPkg/TcpDxe/TcpMisc.c
@@ -2,7 +2,7 @@
Misc support routines for TCP driver.
(C) Copyright 2014 Hewlett-Packard Development Company, L.P.<BR>
- Copyright (c) 2009 - 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2009 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -86,6 +86,7 @@ TcpInitTcbLocal (
// First window size is never scaled
//
Tcb->RcvWndScale = 0;
+ Tcb->RetxmitSeqMax = 0;
Tcb->ProbeTimerOn = FALSE;
}
diff --git a/NetworkPkg/TcpDxe/TcpOutput.c b/NetworkPkg/TcpDxe/TcpOutput.c
index a46cb60..f3dacf3 100644
--- a/NetworkPkg/TcpDxe/TcpOutput.c
+++ b/NetworkPkg/TcpDxe/TcpOutput.c
@@ -1,7 +1,7 @@
/** @file
TCP output process routines.
- Copyright (c) 2009 - 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2009 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -664,7 +664,27 @@ TcpRetransmit (
// 2. Must in the current send window
// 3. Will not change the boundaries of queued segments.
//
- if (TCP_SEQ_LT (Tcb->SndWl2 + Tcb->SndWnd, Seq)) {
+
+ if ((Tcb->SndWndScale != 0) &&
+ (TCP_SEQ_GT (Seq, Tcb->RetxmitSeqMax) || TCP_SEQ_GT (Tcb->SndWl2 + Tcb->SndWnd + (1 << Tcb->SndWndScale), Seq))) {
+ //
+ // Handle the Window Retraction if TCP window scale is enabled according to RFC7323:
+ // On first retransmission, or if the sequence number is out of
+ // window by less than 2^Rcv.Wind.Shift, then do normal
+ // retransmission(s) without regard to the receiver window as long
+ // as the original segment was in window when it was sent.
+ //
+ Len = TCP_SUB_SEQ (Tcb->SndNxt, Seq);
+ DEBUG (
+ (EFI_D_WARN,
+ "TcpRetransmit: retransmission without regard to the receiver window for TCB %p\n",
+ Tcb)
+ );
+
+ } else if (TCP_SEQ_GEQ (Tcb->SndWl2 + Tcb->SndWnd, Seq)) {
+ Len = TCP_SUB_SEQ (Tcb->SndWl2 + Tcb->SndWnd, Seq);
+
+ } else {
DEBUG (
(EFI_D_WARN,
"TcpRetransmit: retransmission cancelled because send window too small for TCB %p\n",
@@ -674,10 +694,9 @@ TcpRetransmit (
return 0;
}
- Len = TCP_SUB_SEQ (Tcb->SndWl2 + Tcb->SndWnd, Seq);
- Len = MIN (Len, Tcb->SndMss);
+ Len = MIN (Len, Tcb->SndMss);
- Nbuf = TcpGetSegmentSndQue (Tcb, Seq, Len);
+ Nbuf = TcpGetSegmentSndQue (Tcb, Seq, Len);
if (Nbuf == NULL) {
return -1;
}
@@ -688,6 +707,10 @@ TcpRetransmit (
goto OnError;
}
+ if (TCP_SEQ_GT (Seq, Tcb->RetxmitSeqMax)) {
+ Tcb->RetxmitSeqMax = Seq;
+ }
+
//
// The retransmitted buffer may be on the SndQue,
// trim TCP head because all the buffers on SndQue
diff --git a/NetworkPkg/TcpDxe/TcpProto.h b/NetworkPkg/TcpDxe/TcpProto.h
index ee35134..81397d7 100644
--- a/NetworkPkg/TcpDxe/TcpProto.h
+++ b/NetworkPkg/TcpDxe/TcpProto.h
@@ -1,7 +1,7 @@
/** @file
TCP protocol header file.
- Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2009 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -316,6 +316,12 @@ struct _TCP_CONTROL_BLOCK {
TCP_SEQNO LossRecover; ///< Recover point for retxmit.
//
+ // RFC7323
+ // Addressing Window Retraction for TCP Window Scale Option.
+ //
+ TCP_SEQNO RetxmitSeqMax; ///< Max Seq number in previous retransmission.
+
+ //
// configuration parameters, for EFI_TCP4_PROTOCOL specification
//
UINT32 KeepAliveIdle; ///< Idle time before sending first probe.
--
1.9.5.msysgit.1
next prev parent reply other threads:[~2017-05-05 1:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-05 1:56 [Patch V2] MdeModulePkg: Addressing TCP Window Retraction when window scale factor is used Fu Siyuan
2017-05-05 1:56 ` Fu Siyuan [this message]
2017-05-05 5:03 ` [Patch V2] NetworkPkg: " Ye, Ting
2017-05-05 5:12 ` Wu, Jiaxin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1493949365-105904-2-git-send-email-siyuan.fu@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox