[staging/cadence-aarch64 PATCH v3 6/6] CadencePkg: Add .dsc, .fdf and .dec files for Cadence CSP platform.

[Scott Telford <stelford@cadence.com>]

Add .dsc, .fdf and .dec files for a Cadence CSP platform configured
with a single Cortex-A53, GIC-500, Cadence UART and Cadence PCIe Root
Complex.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Telford <stelford@cadence.com>
---
 CadencePkg/CadenceCsp.dsc    | 672 +++++++++++++++++++++++++++++++++++++++++++
 CadencePkg/CadenceCsp.fdf    | 412 ++++++++++++++++++++++++++
 CadencePkg/CadenceCspPkg.dec |  55 ++++
 3 files changed, 1139 insertions(+)
 create mode 100644 CadencePkg/CadenceCsp.dsc
 create mode 100644 CadencePkg/CadenceCsp.fdf
 create mode 100644 CadencePkg/CadenceCspPkg.dec

diff --git a/CadencePkg/CadenceCsp.dsc b/CadencePkg/CadenceCsp.dsc
new file mode 100644
index 0000000..eb98a29
--- /dev/null
+++ b/CadencePkg/CadenceCsp.dsc
@@ -0,0 +1,672 @@
+#
+#  Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+#  Copyright (c) 2017, Cadence Design Systems, Inc. All rights reserved.
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution.  The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+  PLATFORM_NAME                  = CadenceCsp
+  PLATFORM_GUID                  = 262f8c6b-047b-4afe-b317-7c90b795beb8
+  PLATFORM_VERSION               = 0.1
+  DSC_SPECIFICATION              = 1.25
+!ifdef $(EDK2_OUT_DIR)
+  OUTPUT_DIRECTORY               = $(EDK2_OUT_DIR)
+!else
+  OUTPUT_DIRECTORY               = Build/CadenceCsp
+!endif
+  SUPPORTED_ARCHITECTURES        = AARCH64
+  BUILD_TARGETS                  = DEBUG|RELEASE
+  SKUID_IDENTIFIER               = DEFAULT
+  FLASH_DEFINITION               = CadencePkg/CadenceCsp.fdf
+
+  SECURE_BOOT_ENABLE  = FALSE
+
+[LibraryClasses.common]
+  ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
+  ArmPlatformLib|CadencePkg/Library/CadenceCspLib/CadenceCspLib.inf
+  ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
+  TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
+
+  # Virtio Support
+  VirtioLib|OvmfPkg/Library/VirtioLib/VirtioLib.inf
+  VirtioMmioDeviceLib|OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceLib.inf
+!if $(SECURE_BOOT_ENABLE) == TRUE
+  FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
+!endif
+
+!if $(TARGET) == RELEASE
+  DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf
+!else
+  DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
+!endif
+  DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
+
+  BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
+  SynchronizationLib|MdePkg/Library/BaseSynchronizationLib/BaseSynchronizationLib.inf
+  PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf
+  PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+  PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+  PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
+  IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
+  UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+  CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
+
+  UefiLib|MdePkg/Library/UefiLib/UefiLib.inf
+  HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
+  UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf
+  DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+  UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf
+  UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
+  DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf
+  DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+  ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf
+  UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf
+  UefiApplicationEntryPoint|MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf
+  HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
+  UefiHiiServicesLib|MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServicesLib.inf
+
+  UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf
+
+  #
+  # Assume everything is fixed at build
+  #
+  PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+
+  BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+
+  # Networking Requirements
+  NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf
+  DpcLib|MdeModulePkg/Library/DxeDpcLib/DxeDpcLib.inf
+  UdpIoLib|MdeModulePkg/Library/DxeUdpIoLib/DxeUdpIoLib.inf
+  IpIoLib|MdeModulePkg/Library/DxeIpIoLib/DxeIpIoLib.inf
+
+  # ARM Architectural Libraries
+  CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
+  DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLib.inf
+  CpuExceptionHandlerLib|ArmPkg/Library/ArmExceptionLib/ArmExceptionLib.inf
+  ArmDisassemblerLib|ArmPkg/Library/ArmDisassemblerLib/ArmDisassemblerLib.inf
+  DmaLib|ArmPkg/Library/ArmDmaLib/ArmDmaLib.inf
+  ArmGicLib|ArmPkg/Drivers/ArmGic/ArmGicLib.inf
+  ArmGicArchLib|ArmPkg/Library/ArmGicArchLib/ArmGicArchLib.inf
+  ArmPlatformStackLib|ArmPlatformPkg/Library/ArmPlatformStackLib/ArmPlatformStackLib.inf
+  ArmSmcLib|ArmPkg/Library/ArmSmcLib/ArmSmcLib.inf
+  ArmGenericTimerCounterLib|ArmPkg/Library/ArmGenericTimerPhyCounterLib/ArmGenericTimerPhyCounterLib.inf
+
+  PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf
+  EfiResetSystemLib|CadencePkg/Library/CadenceCspResetSystemLib/CadenceCspResetSystemLib.inf
+
+  RealTimeClockLib|EmbeddedPkg/Library/TemplateRealTimeClockLib/TemplateRealTimeClockLib.inf
+
+  CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
+  GenericBdsLib|IntelFrameworkModulePkg/Library/GenericBdsLib/GenericBdsLib.inf
+  PlatformBdsLib|ArmPlatformPkg/Library/PlatformIntelBdsLib/PlatformIntelBdsLib.inf
+  CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf
+
+  BdsLib|ArmPkg/Library/BdsLib/BdsLib.inf
+
+# CSP Libraries
+  SerialPortLib|CadencePkg/Library/CadenceCspSerialPortLib/CspSerialPortLib.inf
+
+  #
+  # Uncomment (and comment out the next line) For RealView Debugger. The Standard IO window
+  # in the debugger will show load and unload commands for symbols. You can cut and paste this
+  # into the command window to load symbols. We should be able to use a script to do this, but
+  # the version of RVD I have does not support scripts accessing system memory.
+  #
+  #PeCoffExtraActionLib|ArmPkg/Library/RvdPeCoffExtraActionLib/RvdPeCoffExtraActionLib.inf
+  PeCoffExtraActionLib|ArmPkg/Library/DebugPeCoffExtraActionLib/DebugPeCoffExtraActionLib.inf
+  #PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
+
+  DebugAgentLib|MdeModulePkg/Library/DebugAgentLibNull/DebugAgentLibNull.inf
+  DebugAgentTimerLib|EmbeddedPkg/Library/DebugAgentTimerLibNull/DebugAgentTimerLibNull.inf
+
+  AcpiLib|EmbeddedPkg/Library/AcpiLib/AcpiLib.inf
+  FdtLib|EmbeddedPkg/Library/FdtLib/FdtLib.inf
+
+  ShellLib|ShellPkg/Library/UefiShellLib/UefiShellLib.inf
+  FileHandleLib|MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf
+  SortLib|MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf
+
+  #
+  # Secure Boot dependencies
+  #
+!if $(SECURE_BOOT_ENABLE) == TRUE
+  IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
+  OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
+  TpmMeasurementLib|SecurityPkg/Library/DxeTpmMeasurementLib/DxeTpmMeasurementLib.inf
+  AuthVariableLib|SecurityPkg/Library/AuthVariableLib/AuthVariableLib.inf
+  BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
+
+  # re-use the UserPhysicalPresent() dummy implementation from the ovmf tree
+  PlatformSecureLib|OvmfPkg/Library/PlatformSecureLib/PlatformSecureLib.inf
+!else
+  TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
+  AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
+!endif
+  VarCheckLib|MdeModulePkg/Library/VarCheckLib/VarCheckLib.inf
+
+[LibraryClasses.common.SEC]
+  ArmPlatformSecLib|CadencePkg/Library/CadenceCspSecLib/CadenceCspSecLib.inf
+  ArmPlatformLib|CadencePkg/Library/CadenceCspLib/CadenceCspLibSec.inf
+  DebugAgentLib|ArmPkg/Library/DebugAgentSymbolsBaseLib/DebugAgentSymbolsBaseLib.inf
+  DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLibBase.inf
+
+!ifdef $(EDK2_SKIP_PEICORE)
+  PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
+  ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
+  LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+  MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
+  HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
+  PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
+  PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
+!endif
+
+  # Trustzone Support
+  ArmTrustedMonitorLib|ArmPlatformPkg/Library/ArmTrustedMonitorLibNull/ArmTrustedMonitorLibNull.inf
+
+  ArmGicArchLib|ArmPkg/Library/ArmGicArchSecLib/ArmGicArchSecLib.inf
+
+
+[LibraryClasses.common.PEI_CORE]
+  HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
+  PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
+  MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+  PeiCoreEntryPoint|MdePkg/Library/PeiCoreEntryPoint/PeiCoreEntryPoint.inf
+  PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
+  ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+  OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
+  PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+  UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+  ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
+
+  PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
+
+[LibraryClasses.common.PEIM]
+  HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
+  PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
+  MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+  PeimEntryPoint|MdePkg/Library/PeimEntryPoint/PeimEntryPoint.inf
+  PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
+  ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+  OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
+  PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+  PeiResourcePublicationLib|MdePkg/Library/PeiResourcePublicationLib/PeiResourcePublicationLib.inf
+  UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+  ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
+
+  PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
+
+[LibraryClasses.common.SEC, LibraryClasses.common.PEIM]
+  MemoryInitPeiLib|ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.inf
+
+[LibraryClasses.common.DXE_CORE]
+  HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf
+  MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf
+  DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf
+  ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+  ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+  UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+  DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+  PerformanceLib|MdeModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.inf
+
+[LibraryClasses.common.DXE_DRIVER]
+  ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+  DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+  SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf
+  PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+  MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+
+[LibraryClasses.common.UEFI_APPLICATION]
+  UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf
+  PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+  MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+  HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
+
+[LibraryClasses.common.UEFI_DRIVER]
+  ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+  UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf
+  ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+  PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+  DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+  MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+
+[LibraryClasses.common.DXE_RUNTIME_DRIVER]
+  HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
+  MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+  ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+  CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
+!if $(SECURE_BOOT_ENABLE) == TRUE
+  BaseCryptLib|CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf
+!endif
+
+[LibraryClasses.ARM, LibraryClasses.AARCH64]
+  #
+  # It is not possible to prevent the ARM compiler for generic intrinsic functions.
+  # This library provides the instrinsic functions generate by a given compiler.
+  # [LibraryClasses.ARM] and NULL mean link this library into all ARM images.
+  #
+  NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
+
+  # Add support for GCC stack protector
+  NULL|MdePkg/Library/BaseStackCheckLib/BaseStackCheckLib.inf
+
+[LibraryClasses.common.UEFI_DRIVER, LibraryClasses.common.UEFI_APPLICATION, LibraryClasses.common.DXE_RUNTIME_DRIVER, LibraryClasses.common.DXE_DRIVER]
+  PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
+  PciHostBridgeLib|CadencePkg/Library/CadencePciHostBridgeLib/CdnsPciHostBridgeLib.inf
+  PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf
+  PciLib|MdePkg/Library/BasePciLibPciExpress/BasePciLibPciExpress.inf
+  PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
+
+[BuildOptions]
+  GCC:RELEASE_*_*_CC_FLAGS  = -DMDEPKG_NDEBUG
+
+[BuildOptions.common.EDKII.DXE_RUNTIME_DRIVER]
+  GCC:*_*_ARM_DLINK_FLAGS = -z common-page-size=0x1000
+  GCC:*_*_AARCH64_DLINK_FLAGS = -z common-page-size=0x10000
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+
+[PcdsFeatureFlag.common]
+  gEfiMdePkgTokenSpaceGuid.PcdComponentNameDisable|TRUE
+  gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnosticsDisable|TRUE
+  gEfiMdePkgTokenSpaceGuid.PcdComponentName2Disable|TRUE
+  gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnostics2Disable|TRUE
+
+  #
+  # Control what commands are supported from the UI
+  # Turn these on and off to add features or save size
+  #
+  gEmbeddedTokenSpaceGuid.PcdEmbeddedMacBoot|TRUE
+  gEmbeddedTokenSpaceGuid.PcdEmbeddedDirCmd|TRUE
+  gEmbeddedTokenSpaceGuid.PcdEmbeddedHobCmd|TRUE
+  gEmbeddedTokenSpaceGuid.PcdEmbeddedHwDebugCmd|TRUE
+  gEmbeddedTokenSpaceGuid.PcdEmbeddedPciDebugCmd|TRUE
+  gEmbeddedTokenSpaceGuid.PcdEmbeddedIoEnable|FALSE
+  gEmbeddedTokenSpaceGuid.PcdEmbeddedScriptCmd|FALSE
+
+  gEmbeddedTokenSpaceGuid.PcdCacheEnable|TRUE
+
+  # Use the Vector Table location in CpuDxe. We will not copy the Vector Table at PcdCpuVectorBaseAddress
+  gArmTokenSpaceGuid.PcdRelocateVectorTable|FALSE
+
+  gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob|TRUE
+
+  gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|TRUE
+
+[PcdsFixedAtBuild.common]
+  gArmPlatformTokenSpaceGuid.PcdFirmwareVendor|"Cadence CSP"
+!ifdef $(FIRMWARE_VER)
+  gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L"$(FIRMWARE_VER)"
+!endif
+
+  # Only one core enters UEFI, and PSCI is implemented in EL3 by ATF
+  gArmPlatformTokenSpaceGuid.PcdCoreCount|1
+  gArmTokenSpaceGuid.PcdVFPEnabled|1
+
+  # Stacks for MPCores in Normal World
+  # Non-Trusted SRAM
+  gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000
+  gArmPlatformTokenSpaceGuid.PcdCPUCoreSecondaryStackSize|0x0
+
+  # Size of the region used by UEFI in permanent memory (Reserved 64MB)
+  gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000
+
+  #
+  # ARM Pcds
+  #
+  # Stacks for MPCores in Secure World
+  gArmPlatformTokenSpaceGuid.PcdCPUCoresSecStackBase|0x3F000000
+   # Stacks for MPCores in Normal World
+  gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0x3F020000
+
+  gArmTokenSpaceGuid.PcdSystemMemoryBase|0x10000000
+  gArmTokenSpaceGuid.PcdSystemMemorySize|0x30000000
+
+  ## Trustzone enable (to make the transition from EL3 to NS EL2 in ArmPlatformPkg/Sec)
+  gArmTokenSpaceGuid.PcdTrustzoneSupport|TRUE
+
+  #
+  # ARM General Interrupt Controller
+  #
+  gArmTokenSpaceGuid.PcdGicDistributorBase|0xfd100000
+  gArmTokenSpaceGuid.PcdGicRedistributorsBase|0xfd140000
+  gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE
+
+  #
+  # Cadence PCIe Root Complex
+  #
+  gArmTokenSpaceGuid.PcdPciBusMax|31
+  gArmTokenSpaceGuid.PcdPciIoBase|0x0
+  gArmTokenSpaceGuid.PcdPciIoSize|0x01000000
+  gArmTokenSpaceGuid.PcdPciMmio32Base|0x42000000
+  gArmTokenSpaceGuid.PcdPciMmio32Size|0x01000000
+
+  gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress|0x40000000
+  gArmTokenSpaceGuid.PcdPciIoTranslation|0x43000000
+  gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|24
+
+  # Use the serial console (ConIn & ConOut)
+  gArmPlatformTokenSpaceGuid.PcdDefaultConOutPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenPcAnsi()"
+  gArmPlatformTokenSpaceGuid.PcdDefaultConInPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenPcAnsi()"
+
+  #
+  # ARM Architectural Timer Frequency
+  #
+  # Set tick frequency value to 100MHz
+  gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|100000000
+
+  # the entire address space can be covered by 36 bit VAs
+  gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize|36
+
+  gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength|1000000
+  gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength|1000000
+  gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000
+  gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout|10000000
+  gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue|0xAF
+  gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|1
+  gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0
+  gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320
+
+  # DEBUG_ASSERT_ENABLED       0x01
+  # DEBUG_PRINT_ENABLED        0x02
+  # DEBUG_CODE_ENABLED         0x04
+  # CLEAR_MEMORY_ENABLED       0x08
+  # ASSERT_BREAKPOINT_ENABLED  0x10
+  # ASSERT_DEADLOOP_ENABLED    0x20
+!if $(TARGET) == RELEASE
+  gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x21
+!else
+  gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f
+!endif
+
+  #  DEBUG_INIT      0x00000001  // Initialization
+  #  DEBUG_WARN      0x00000002  // Warnings
+  #  DEBUG_LOAD      0x00000004  // Load events
+  #  DEBUG_FS        0x00000008  // EFI File system
+  #  DEBUG_POOL      0x00000010  // Alloc & Free (pool)
+  #  DEBUG_PAGE      0x00000020  // Alloc & Free (page)
+  #  DEBUG_INFO      0x00000040  // Informational debug messages
+  #  DEBUG_DISPATCH  0x00000080  // PEI/DXE/SMM Dispatchers
+  #  DEBUG_VARIABLE  0x00000100  // Variable
+  #  DEBUG_BM        0x00000400  // Boot Manager
+  #  DEBUG_BLKIO     0x00001000  // BlkIo Driver
+  #  DEBUG_NET       0x00004000  // SNP Driver
+  #  DEBUG_UNDI      0x00010000  // UNDI Driver
+  #  DEBUG_LOADFILE  0x00020000  // LoadFile
+  #  DEBUG_EVENT     0x00080000  // Event messages
+  #  DEBUG_GCD       0x00100000  // Global Coherency Database changes
+  #  DEBUG_CACHE     0x00200000  // Memory range cachability changes
+  #  DEBUG_VERBOSE   0x00400000  // Detailed debug messages that may
+  #                              // significantly impact boot performance
+  #  DEBUG_ERROR     0x80000000  // Error
+#  gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000000F
+  gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000054F
+
+  gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07
+
+  gEmbeddedTokenSpaceGuid.PcdEmbeddedAutomaticBootCommand|""
+  gEmbeddedTokenSpaceGuid.PcdEmbeddedDefaultTextColor|0x07
+  gEmbeddedTokenSpaceGuid.PcdEmbeddedMemVariableStoreSize|0x10000
+
+  #
+  # Optional feature to help prevent EFI memory map fragments
+  # Turned on and off via: PcdPrePiProduceMemoryTypeInformationHob
+  # Values are in EFI Pages (4K). DXE Core will make sure that
+  # at least this much of each type of memory can be allocated
+  # from a single memory range. This way you only end up with
+  # maximum of two fragements for each type in the memory map
+  # (the memory used, and the free memory that was prereserved
+  # but not used).
+  #
+  gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0
+  gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS|0
+  gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType|0
+  gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|80
+  gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|65
+  gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode|400
+  gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesData|20000
+  gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderCode|20
+  gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderData|0
+
+  gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE
+
+!if $(SECURE_BOOT_ENABLE) == TRUE
+  # override the default values from SecurityPkg to ensure images from all sources are verified in secure boot
+  gEfiSecurityPkgTokenSpaceGuid.PcdOptionRomImageVerificationPolicy|0x04
+  gEfiSecurityPkgTokenSpaceGuid.PcdFixedMediaImageVerificationPolicy|0x04
+  gEfiSecurityPkgTokenSpaceGuid.PcdRemovableMediaImageVerificationPolicy|0x04
+!endif
+
+# Generic UART PCDs
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits|8
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity|1
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits|1
+
+#
+# Cadence CSP Base Components PCDs
+#
+  gCadenceCspTokenSpaceGuid.PcdCspSysRegBase|0xfd020000
+  gCadenceCspTokenSpaceGuid.PcdCspSysRegSize|0x00001000
+  gCadenceCspTokenSpaceGuid.PcdCspSerialBase|0xfd000000
+  gCadenceCspTokenSpaceGuid.PcdCspSerialSize|0x00001000
+
+# Cadence xHCI
+#  gCadenceCspTokenSpaceGuid.PcdCadenceUsbXhciBaseAddress|0x70000000
+#  gCadenceCspTokenSpaceGuid.PcdCadenceUsbXhciSize|0x7009ffff
+
+  gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
+  gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile|{ 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1 }
+
+################################################################################
+#
+# Components Section - list of all EDK II Modules needed by this Platform
+#
+################################################################################
+[Components.common]
+
+  #
+  # SEC
+  #
+  CadencePkg/Sec/Sec.inf {
+    <LibraryClasses>
+      # Use the implementation which set the Secure bits
+      ArmGicLib|ArmPkg/Drivers/ArmGic/ArmGicSecLib.inf
+  }
+
+  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf {
+    <LibraryClasses>
+      PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+  }
+
+  #
+  # SATA Controller
+  #
+  MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
+  EmbeddedPkg/Drivers/SataSiI3132Dxe/SataSiI3132Dxe.inf
+
+  #
+  # NVMe boot devices
+  #
+  MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf
+  #
+  # Networking stack
+  #
+  MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
+  MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
+  MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
+  MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
+  MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
+  MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
+  MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
+  MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
+  MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
+  MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
+  MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
+  MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
+
+  # FV Filesystem
+  MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
+
+  #
+  # UEFI application (Shell Embedded Boot Loader)
+  #
+  ShellPkg/Application/Shell/Shell.inf {
+    <LibraryClasses>
+      ShellCommandLib|ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf
+      NULL|ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf
+      NULL|ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf
+      NULL|ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3CommandsLib.inf
+      NULL|ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1CommandsLib.inf
+      NULL|ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.inf
+      NULL|ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1CommandsLib.inf
+      NULL|ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1CommandsLib.inf
+      NULL|ShellPkg/Library/UefiShellTftpCommandLib/UefiShellTftpCommandLib.inf
+      HandleParsingLib|ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.inf
+      PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+      BcfgCommandLib|ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.inf
+  }
+
+!ifdef ARM_SBSA_ACS
+  # ARM SBSA ACS app
+  AppPkg/Applications/sbsa-acs/uefi_app/SbsaAvs.inf {
+    <LibraryClasses>
+    SbsaPalLib|AppPkg/Applications/sbsa-acs/platform/pal_uefi/SbsaPalLib.inf
+    SbsaValLib|AppPkg/Applications/sbsa-acs/val/SbsaValLib.inf
+    ShellCEntryLib|ShellPkg/Library/UefiShellCEntryLib/UefiShellCEntryLib.inf
+  }
+!endif
+
+  #
+  # PEI Phase modules
+  #
+!ifdef EDK2_SKIP_PEICORE
+  # UEFI is placed in RAM by bootloader
+  ArmPlatformPkg/PrePi/PeiUniCore.inf {
+    <LibraryClasses>
+      ArmPlatformLib|CadencePkg/Library/CadenceCspLib/CadenceCspLib.inf
+  }
+!else
+  # UEFI lives in FLASH and copies itself to RAM
+  ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
+  MdeModulePkg/Core/Pei/PeiMain.inf
+  MdeModulePkg/Universal/PCD/Pei/Pcd.inf  {
+    <LibraryClasses>
+      PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+  }
+  ArmPlatformPkg/PlatformPei/PlatformPeim.inf
+  ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
+  ArmPkg/Drivers/CpuPei/CpuPei.inf
+  IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
+  Nt32Pkg/BootModePei/BootModePei.inf
+  MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
+  MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf {
+    <LibraryClasses>
+      NULL|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+  }
+!endif
+
+  #
+  # DXE
+  #
+  MdeModulePkg/Core/Dxe/DxeMain.inf {
+    <LibraryClasses>
+      PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+      NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf
+  }
+
+  #
+  # Architectural Protocols
+  #
+  ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+  MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+!if $(SECURE_BOOT_ENABLE) == TRUE
+  MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf {
+    <LibraryClasses>
+      NULL|SecurityPkg/Library/DxeImageVerificationLib/DxeImageVerificationLib.inf
+  }
+  SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
+!else
+  MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+!endif
+  MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+  MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+  MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
+  MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+  EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+  EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
+  EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
+
+  MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+  MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+  MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+
+  MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+  #
+  # ACPI Support
+  #
+  MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
+  MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
+  CadencePkg/AcpiTables/AcpiTables.inf
+
+  ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
+  ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+  # Required by PCI
+  UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
+
+  #
+  # PCI Support
+  #
+  MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
+  MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
+
+!ifdef INTEL_UNDI_BIN
+  CadencePkg/Drivers/IntelUndiPkg/Binary/GigUndiDxe.inf
+!endif
+
+  # Simple TextIn/TextOut for UEFI Terminal
+  EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
+
+  # SMBIOS Support
+
+  MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
+
+  #
+  # Platform Driver
+  #
+  OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
+
+  #
+  # FAT filesystem + GPT/MBR partitioning
+  #
+  MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+  MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+  FatPkg/EnhancedFatDxe/Fat.inf
+  MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+
+  #
+  # Bds
+  #
+  MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+  MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+  MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+  IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
diff --git a/CadencePkg/CadenceCsp.fdf b/CadencePkg/CadenceCsp.fdf
new file mode 100644
index 0000000..ecea87a
--- /dev/null
+++ b/CadencePkg/CadenceCsp.fdf
@@ -0,0 +1,412 @@
+#
+#  Copyright (c) 2011 - 2015, ARM Limited. All rights reserved.
+#  Copyright (c) 2017, Cadence Design Systems, Inc. All rights reserved.
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution.  The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into  the Flash Device Image.  Each FD section
+# defines one flash "device" image.  A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash"  image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+[FD.Sec_CDNS_CSP_AARCH64_EFI]
+BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdSecureFdBaseAddress  #The base address of the Secure FLASH Device.
+Size          = 0x00020000|gArmTokenSpaceGuid.PcdSecureFdSize         #The size in bytes of the Secure FLASH Device
+ErasePolarity = 1
+BlockSize     = 0x00002000
+NumBlocks     = 0x10
+
+
+################################################################################
+#
+# Following are lists of FD Region layout which correspond to the locations of different
+# images within the flash device.
+#
+# Regions must be defined in ascending order and may not overlap.
+#
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
+# the pipe "|" character, followed by the size of the region, also in hex with the leading
+# "0x" characters. Like:
+# Offset|Size
+# PcdOffsetCName|PcdSizeCName
+# RegionType <FV, DATA, or FILE>
+#
+################################################################################
+
+0x00000000|0x00020000
+gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
+FV = FVMAIN_SEC
+
+
+[FD.CDNS_CSP_AARCH64_EFI]
+BaseAddress   = 0x0020000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
+Size          = 0x00400000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
+ErasePolarity = 1
+
+# This one is tricky, it must be: BlockSize * NumBlocks = Size
+BlockSize     = 0x00001000
+NumBlocks     = 0x400
+
+################################################################################
+#
+# Following are lists of FD Region layout which correspond to the locations of different
+# images within the flash device.
+#
+# Regions must be defined in ascending order and may not overlap.
+#
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
+# the pipe "|" character, followed by the size of the region, also in hex with the leading
+# "0x" characters. Like:
+# Offset|Size
+# PcdOffsetCName|PcdSizeCName
+# RegionType <FV, DATA, or FILE>
+#
+################################################################################
+
+0x00000000|0x00280000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+################################################################################
+#
+# FV Section
+#
+# [FV] section is used to define what components or modules are placed within a flash
+# device file.  This section also defines order the components and modules are positioned
+# within the image.  The [FV] section consists of define statements, set statements and
+# module statements.
+#
+################################################################################
+
+[FV.FVMAIN_SEC]
+FvAlignment        = 8
+ERASE_POLARITY     = 1
+MEMORY_MAPPED      = TRUE
+STICKY_WRITE       = TRUE
+LOCK_CAP           = TRUE
+LOCK_STATUS        = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP  = TRUE
+WRITE_STATUS       = TRUE
+WRITE_LOCK_CAP     = TRUE
+WRITE_LOCK_STATUS  = TRUE
+READ_DISABLED_CAP  = TRUE
+READ_ENABLED_CAP   = TRUE
+READ_STATUS        = TRUE
+READ_LOCK_CAP      = TRUE
+READ_LOCK_STATUS   = TRUE
+
+  INF CadencePkg/Sec/Sec.inf
+
+
+[FV.FvMain]
+BlockSize          = 0x40
+NumBlocks          = 0         # This FV gets compressed so make it just big enough
+FvAlignment        = 16        # FV alignment and FV attributes setting.
+ERASE_POLARITY     = 1
+MEMORY_MAPPED      = TRUE
+STICKY_WRITE       = TRUE
+LOCK_CAP           = TRUE
+LOCK_STATUS        = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP  = TRUE
+WRITE_STATUS       = TRUE
+WRITE_LOCK_CAP     = TRUE
+WRITE_LOCK_STATUS  = TRUE
+READ_DISABLED_CAP  = TRUE
+READ_ENABLED_CAP   = TRUE
+READ_STATUS        = TRUE
+READ_LOCK_CAP      = TRUE
+READ_LOCK_STATUS   = TRUE
+FvNameGuid         = b1e2a5cf-5357-4fc8-9532-49f3ce327bd3
+
+  INF MdeModulePkg/Core/Dxe/DxeMain.inf
+  INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
+
+  #
+  # PI DXE Drivers producing Architectural Protocols (EFI Services)
+  #
+  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+!if $(SECURE_BOOT_ENABLE) == TRUE
+  INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
+!endif
+  INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
+  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
+  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
+
+  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+  # Required by PCI
+  INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
+
+  #
+  # PCI Support
+  #
+  INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
+  INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
+!ifdef INTEL_UNDI_BIN
+  INF CadencePkg/Drivers/IntelUndiPkg/Binary/GigUndiDxe.inf
+!endif
+
+  # ACPI Support
+  #
+  INF MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
+  INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
+  INF RuleOverride=ACPITABLE CadencePkg/AcpiTables/AcpiTables.inf
+
+  #
+  # Multiple Console IO support
+  #
+  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+  INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+
+  INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
+  INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+
+  #
+  # FAT filesystem + GPT/MBR partitioning
+  #
+  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+  INF FatBinPkg/EnhancedFatDxe/Fat.inf
+  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+
+  # SMBIOS Support
+  #
+  INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
+
+  #
+  # Platform Driver
+  #
+  INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
+  #
+  # SATA Controller
+  #
+  INF MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
+  INF EmbeddedPkg/Drivers/SataSiI3132Dxe/SataSiI3132Dxe.inf
+
+  #
+  # NVMe boot devices
+  #
+  INF  MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf
+
+  #
+  # UEFI application (Shell Embedded Boot Loader)
+  #
+  INF ShellPkg/Application/Shell/Shell.inf
+
+  #
+  # Networking stack
+  #
+  INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
+  INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
+  INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
+  INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
+  INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
+  INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
+  INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
+  INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
+  INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
+  INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
+  INF MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
+  INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
+
+!ifdef ARM_SBSA_ACS
+  # ARM SBSA ACS app
+  INF AppPkg/Applications/sbsa-acs/uefi_app/SbsaAvs.inf
+!endif
+
+  #
+  # Bds
+  #
+  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+  INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+  INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+  INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
+
+  #
+  # TianoCore logo (splash screen)
+  #
+  FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {
+   SECTION RAW = MdeModulePkg/Logo/Logo.bmp
+  }
+
+  # FV Filesystem
+  INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
+
+  #
+  # FDT installation
+  #
+  # The UEFI driver is at the end of the list of the driver to be dispatched
+  # after the device drivers (eg: Ethernet) to ensure we have support for them.
+#  INF EmbeddedPkg/Drivers/FdtPlatformDxe/FdtPlatformDxe.inf
+
+[FV.FVMAIN_COMPACT]
+FvAlignment        = 16
+ERASE_POLARITY     = 1
+MEMORY_MAPPED      = TRUE
+STICKY_WRITE       = TRUE
+LOCK_CAP           = TRUE
+LOCK_STATUS        = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP  = TRUE
+WRITE_STATUS       = TRUE
+WRITE_LOCK_CAP     = TRUE
+WRITE_LOCK_STATUS  = TRUE
+READ_DISABLED_CAP  = TRUE
+READ_ENABLED_CAP   = TRUE
+READ_STATUS        = TRUE
+READ_LOCK_CAP      = TRUE
+READ_LOCK_STATUS   = TRUE
+
+!if $(EDK2_SKIP_PEICORE) == 1
+  INF ArmPlatformPkg/PrePi/PeiUniCore.inf
+!else
+  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
+  INF MdeModulePkg/Core/Pei/PeiMain.inf
+  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
+  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
+  INF ArmPkg/Drivers/CpuPei/CpuPei.inf
+  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
+  INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
+  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
+  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
+!endif
+
+  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
+    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
+      SECTION FV_IMAGE = FVMAIN
+    }
+  }
+
+
+################################################################################
+#
+# Rules are use with the [FV] section's module INF type to define
+# how an FFS file is created for a given INF file. The following Rule are the default
+# rules for the different module type. User can add the customized rules to define the
+# content of the FFS file.
+#
+################################################################################
+
+
+############################################################################
+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
+############################################################################
+#
+#[Rule.Common.DXE_DRIVER]
+#  FILE DRIVER = $(NAMED_GUID) {
+#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+#    COMPRESS PI_STD {
+#      GUIDED {
+#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
+#        UI       STRING="$(MODULE_NAME)" Optional
+#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+#      }
+#    }
+#  }
+#
+############################################################################
+
+[Rule.Common.SEC]
+  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
+    TE  TE Align = Auto                 $(INF_OUTPUT)/$(MODULE_NAME).efi
+  }
+
+[Rule.Common.PEI_CORE]
+  FILE PEI_CORE = $(NAMED_GUID) FIXED {
+    TE     TE Align = Auto              $(INF_OUTPUT)/$(MODULE_NAME).efi
+    UI     STRING ="$(MODULE_NAME)" Optional
+  }
+
+[Rule.Common.PEIM]
+  FILE PEIM = $(NAMED_GUID) FIXED {
+     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
+     TE       TE Align = Auto           $(INF_OUTPUT)/$(MODULE_NAME).efi
+     UI       STRING="$(MODULE_NAME)" Optional
+  }
+
+[Rule.Common.PEIM.TIANOCOMPRESSED]
+  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
+    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
+    GUIDED 4caac18f-ffe5-48f2-86a5-23a615120637 PROCESSING_REQUIRED = TRUE {
+      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
+      UI        STRING="$(MODULE_NAME)" Optional
+    }
+  }
+
+[Rule.Common.DXE_CORE]
+  FILE DXE_CORE = $(NAMED_GUID) {
+    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
+    UI       STRING="$(MODULE_NAME)" Optional
+  }
+
+[Rule.Common.UEFI_DRIVER]
+  FILE DRIVER = $(NAMED_GUID) {
+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
+    UI           STRING="$(MODULE_NAME)" Optional
+  }
+
+[Rule.Common.DXE_DRIVER]
+  FILE DRIVER = $(NAMED_GUID) {
+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
+    UI           STRING="$(MODULE_NAME)" Optional
+  }
+
+[Rule.Common.DXE_RUNTIME_DRIVER]
+  FILE DRIVER = $(NAMED_GUID) {
+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
+    UI           STRING="$(MODULE_NAME)" Optional
+  }
+
+[Rule.Common.UEFI_APPLICATION]
+  FILE APPLICATION = $(NAMED_GUID) {
+    UI     STRING ="$(MODULE_NAME)"     Optional
+    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
+  }
+
+[Rule.Common.UEFI_DRIVER.BINARY]
+  FILE DRIVER = $(NAMED_GUID) {
+    DXE_DEPEX DXE_DEPEX Optional      |.depex
+    PE32      PE32                    |.efi
+    UI        STRING="$(MODULE_NAME)" Optional
+    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+  }
+
+[Rule.Common.UEFI_APPLICATION.BINARY]
+  FILE APPLICATION = $(NAMED_GUID) {
+    PE32      PE32                    |.efi
+    UI        STRING="$(MODULE_NAME)" Optional
+    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+  }
+
+[Rule.Common.USER_DEFINED.ACPITABLE]
+  FILE FREEFORM = $(NAMED_GUID) {
+    RAW ACPI               |.acpi
+    RAW ASL                |.aml
+  }
diff --git a/CadencePkg/CadenceCspPkg.dec b/CadencePkg/CadenceCspPkg.dec
new file mode 100644
index 0000000..c5776cf
--- /dev/null
+++ b/CadencePkg/CadenceCspPkg.dec
@@ -0,0 +1,55 @@
+#/** @file
+# Cadence CSP package.
+#
+#  Copyright (c) 2012-2015, ARM Limited. All rights reserved.
+#  Copyright (c) 2017, Cadence Design Systems, Inc. All rights reserved.
+#
+#  This program and the accompanying materials are licensed and made available
+#  under the terms and conditions of the BSD License which accompanies this
+#  distribution.  The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+  DEC_SPECIFICATION              = 1.25
+  PACKAGE_NAME                   = CadenceCspPkg
+  PACKAGE_GUID                   = 593f66c2-fb57-4aa7-8bd0-149d52443f21
+  PACKAGE_VERSION                = 0.1
+
+################################################################################
+#
+# Include Section - list of Include Paths that are provided by this package.
+#                   Comments are used for Keywords and Module Types.
+#
+# Supported Module Types:
+#  BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION
+#
+################################################################################
+[Includes.common]
+  Include                        # Root include for the package
+
+[Guids.common]
+  gCadenceCspTokenSpaceGuid    =  { 0x593f66c2, 0xfb57, 0x4aa7, { 0x8b, 0xd0, 0x14, 0x9d, 0x52, 0x44, 0x3f, 0x21 } }
+
+[PcdsFixedAtBuild.common]
+  # Cadence CSP System Registers
+  gCadenceCspTokenSpaceGuid.PcdCspSysRegBase|0|UINT64|0x000000C0
+  gCadenceCspTokenSpaceGuid.PcdCspSysRegSize|0|UINT32|0x000000D0
+
+  # Cadence UART
+  gCadenceCspTokenSpaceGuid.PcdCspSerialBase|0|UINT64|0x000000C1
+  gCadenceCspTokenSpaceGuid.PcdCspSerialSize|0|UINT32|0x000000D1
+
+  # Cadence PCIe
+  gCadenceCspTokenSpaceGuid.PcdPcieRootPortBaseAddress|0xfb000000|UINT64|0x0000000C
+  gCadenceCspTokenSpaceGuid.PcdPcie1RootPortBaseAddress|0xfc000000|UINT64|0x000000CD
+  gCadenceCspTokenSpaceGuid.PcdPciConfigurationSpaceBaseAddress|0x40000000|UINT64|0x00000011
+  gCadenceCspTokenSpaceGuid.PcdPciConfigurationSpaceSize|0x02000000|UINT64|0x00000012
+
+  ## Timeout value for displaying progressing bar in before boot OS.
+  #  According to UEFI 2.0 spec, the default TimeOut should be 0xffff.
+  gArmPlatformTokenSpaceGuid.PcdPlatformBootTimeOut|3|UINT16|0x0000001A
-- 
2.2.2