* [PATCH] EmbeddedPkg/MmcDxe: Align the ExtCSD buffer
@ 2017-06-29 9:03 Jun Nie
2017-06-29 11:11 ` Leif Lindholm
0 siblings, 1 reply; 3+ messages in thread
From: Jun Nie @ 2017-06-29 9:03 UTC (permalink / raw)
To: ard.biesheuvel, leif.lindholm, haojian.zhuang, edk2-devel
Cc: shawn.guo, jason.liu, Jun Nie
ExtCSD structure may be read via DMA. So align it to
page to avoid data corruption.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
EmbeddedPkg/Universal/MmcDxe/Mmc.h | 2 +-
EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 11 ++++++++---
2 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/EmbeddedPkg/Universal/MmcDxe/Mmc.h b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
index 8a7d5a3..f3e56ff 100644
--- a/EmbeddedPkg/Universal/MmcDxe/Mmc.h
+++ b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
@@ -319,7 +319,7 @@ typedef struct {
OCR OCRData;
CID CIDData;
CSD CSDData;
- ECSD ECSDData; // MMC V4 extended card specific
+ ECSD *ECSDData; // MMC V4 extended card specific
} CARD_INFO;
typedef struct _MMC_HOST_INSTANCE {
diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
index c28207e..6bb65c3 100644
--- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
+++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
@@ -13,6 +13,7 @@
**/
#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
#include <Library/TimerLib.h>
#include "Mmc.h"
@@ -210,12 +211,16 @@ EmmcIdentificationMode (
}
// Fetch ECSD
+ MmcHostInstance->CardInfo.ECSDData = AllocatePages (1);
+ if (MmcHostInstance->CardInfo.ECSDData == NULL) {
+ return EFI_BUFFER_TOO_SMALL;
+ }
Status = Host->SendCommand (Host, MMC_CMD8, 0);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD fetch error, Status=%r.\n", Status));
}
- Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)&(MmcHostInstance->CardInfo.ECSDData));
+ Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)MmcHostInstance->CardInfo.ECSDData);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD read error, Status=%r.\n", Status));
return Status;
@@ -237,7 +242,7 @@ EmmcIdentificationMode (
Media->LogicalBlocksPerPhysicalBlock = 1;
Media->IoAlign = 4;
// Compute last block using bits [215:212] of the ECSD
- Media->LastBlock = MmcHostInstance->CardInfo.ECSDData.SECTOR_COUNT - 1; // eMMC isn't supposed to report this for
+ Media->LastBlock = MmcHostInstance->CardInfo.ECSDData->SECTOR_COUNT - 1; // eMMC isn't supposed to report this for
// Cards <2GB in size, but the model does.
// Setup card type
@@ -258,7 +263,7 @@ InitializeEmmcDevice (
UINT32 TimingMode[4] = {EMMCHS52DDR1V2, EMMCHS52DDR1V8, EMMCHS52, EMMCHS26};
Host = MmcHostInstance->MmcHost;
- ECSDData = &MmcHostInstance->CardInfo.ECSDData;
+ ECSDData = MmcHostInstance->CardInfo.ECSDData;
if (ECSDData->DEVICE_TYPE == EMMCBACKWARD)
return EFI_SUCCESS;
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] EmbeddedPkg/MmcDxe: Align the ExtCSD buffer
2017-06-29 9:03 [PATCH] EmbeddedPkg/MmcDxe: Align the ExtCSD buffer Jun Nie
@ 2017-06-29 11:11 ` Leif Lindholm
2017-06-29 14:33 ` Jun Nie
0 siblings, 1 reply; 3+ messages in thread
From: Leif Lindholm @ 2017-06-29 11:11 UTC (permalink / raw)
To: Jun Nie; +Cc: ard.biesheuvel, haojian.zhuang, edk2-devel, shawn.guo, jason.liu
On Thu, Jun 29, 2017 at 05:03:50PM +0800, Jun Nie wrote:
> ExtCSD structure may be read via DMA. So align it to
> page to avoid data corruption.
So, this is possibly a valid thing to do, but this is not what you
said in the last version. The last version said you needed 64-bit
alignment, and this is already guaranteed by all of the allocation
functions.
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---
> EmbeddedPkg/Universal/MmcDxe/Mmc.h | 2 +-
> EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 11 ++++++++---
> 2 files changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/EmbeddedPkg/Universal/MmcDxe/Mmc.h b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
> index 8a7d5a3..f3e56ff 100644
> --- a/EmbeddedPkg/Universal/MmcDxe/Mmc.h
> +++ b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
> @@ -319,7 +319,7 @@ typedef struct {
> OCR OCRData;
> CID CIDData;
> CSD CSDData;
> - ECSD ECSDData; // MMC V4 extended card specific
> + ECSD *ECSDData; // MMC V4 extended card specific
> } CARD_INFO;
>
> typedef struct _MMC_HOST_INSTANCE {
> diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
> index c28207e..6bb65c3 100644
> --- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
> +++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
> @@ -13,6 +13,7 @@
> **/
>
> #include <Library/BaseMemoryLib.h>
> +#include <Library/MemoryAllocationLib.h>
> #include <Library/TimerLib.h>
>
> #include "Mmc.h"
> @@ -210,12 +211,16 @@ EmmcIdentificationMode (
> }
>
> // Fetch ECSD
> + MmcHostInstance->CardInfo.ECSDData = AllocatePages (1);
No magic numbers please.
Suggest EFI_SIZE_TO_PAGES (sizeof (ECSD));
Or AllocatePool (EFI_SIZE_TO_PAGES (sizeof (ECSD)));
I'm not seeing a balancing FreePages call in this patch.
My guess would be that DestroyMmcHostInstance() would be the
correct location for it.
> + if (MmcHostInstance->CardInfo.ECSDData == NULL) {
> + return EFI_BUFFER_TOO_SMALL;
I think EFI_OUT_OF_RESOURCES would be more appropriate.
/
Leif
> + }
> Status = Host->SendCommand (Host, MMC_CMD8, 0);
> if (EFI_ERROR (Status)) {
> DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD fetch error, Status=%r.\n", Status));
> }
>
> - Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)&(MmcHostInstance->CardInfo.ECSDData));
> + Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)MmcHostInstance->CardInfo.ECSDData);
> if (EFI_ERROR (Status)) {
> DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD read error, Status=%r.\n", Status));
> return Status;
> @@ -237,7 +242,7 @@ EmmcIdentificationMode (
> Media->LogicalBlocksPerPhysicalBlock = 1;
> Media->IoAlign = 4;
> // Compute last block using bits [215:212] of the ECSD
> - Media->LastBlock = MmcHostInstance->CardInfo.ECSDData.SECTOR_COUNT - 1; // eMMC isn't supposed to report this for
> + Media->LastBlock = MmcHostInstance->CardInfo.ECSDData->SECTOR_COUNT - 1; // eMMC isn't supposed to report this for
> // Cards <2GB in size, but the model does.
>
> // Setup card type
> @@ -258,7 +263,7 @@ InitializeEmmcDevice (
> UINT32 TimingMode[4] = {EMMCHS52DDR1V2, EMMCHS52DDR1V8, EMMCHS52, EMMCHS26};
>
> Host = MmcHostInstance->MmcHost;
> - ECSDData = &MmcHostInstance->CardInfo.ECSDData;
> + ECSDData = MmcHostInstance->CardInfo.ECSDData;
> if (ECSDData->DEVICE_TYPE == EMMCBACKWARD)
> return EFI_SUCCESS;
>
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] EmbeddedPkg/MmcDxe: Align the ExtCSD buffer
2017-06-29 11:11 ` Leif Lindholm
@ 2017-06-29 14:33 ` Jun Nie
0 siblings, 0 replies; 3+ messages in thread
From: Jun Nie @ 2017-06-29 14:33 UTC (permalink / raw)
To: Leif Lindholm
Cc: Ard Biesheuvel, Haojian Zhuang, edk2-devel, Shawn Guo, Jason Liu
2017-06-29 19:11 GMT+08:00 Leif Lindholm <leif.lindholm@linaro.org>:
> On Thu, Jun 29, 2017 at 05:03:50PM +0800, Jun Nie wrote:
>> ExtCSD structure may be read via DMA. So align it to
>> page to avoid data corruption.
>
> So, this is possibly a valid thing to do, but this is not what you
> said in the last version. The last version said you needed 64-bit
> alignment, and this is already guaranteed by all of the allocation
> functions.
Yes, I need 64 bytes alignment. page alignment is better, right? :-)
>
>> Contributed-under: TianoCore Contribution Agreement 1.0
>> Signed-off-by: Jun Nie <jun.nie@linaro.org>
>> ---
>> EmbeddedPkg/Universal/MmcDxe/Mmc.h | 2 +-
>> EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 11 ++++++++---
>> 2 files changed, 9 insertions(+), 4 deletions(-)
>>
>> diff --git a/EmbeddedPkg/Universal/MmcDxe/Mmc.h b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
>> index 8a7d5a3..f3e56ff 100644
>> --- a/EmbeddedPkg/Universal/MmcDxe/Mmc.h
>> +++ b/EmbeddedPkg/Universal/MmcDxe/Mmc.h
>> @@ -319,7 +319,7 @@ typedef struct {
>> OCR OCRData;
>> CID CIDData;
>> CSD CSDData;
>> - ECSD ECSDData; // MMC V4 extended card specific
>> + ECSD *ECSDData; // MMC V4 extended card specific
>> } CARD_INFO;
>>
>> typedef struct _MMC_HOST_INSTANCE {
>> diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
>> index c28207e..6bb65c3 100644
>> --- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
>> +++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
>> @@ -13,6 +13,7 @@
>> **/
>>
>> #include <Library/BaseMemoryLib.h>
>> +#include <Library/MemoryAllocationLib.h>
>> #include <Library/TimerLib.h>
>>
>> #include "Mmc.h"
>> @@ -210,12 +211,16 @@ EmmcIdentificationMode (
>> }
>>
>> // Fetch ECSD
>> + MmcHostInstance->CardInfo.ECSDData = AllocatePages (1);
>
> No magic numbers please.
> Suggest EFI_SIZE_TO_PAGES (sizeof (ECSD));
> Or AllocatePool (EFI_SIZE_TO_PAGES (sizeof (ECSD)));
You are right.
>
> I'm not seeing a balancing FreePages call in this patch.
> My guess would be that DestroyMmcHostInstance() would be the
> correct location for it.
Add FreePages shall be more clear. Will do in next version.
>
>> + if (MmcHostInstance->CardInfo.ECSDData == NULL) {
>> + return EFI_BUFFER_TOO_SMALL;
>
> I think EFI_OUT_OF_RESOURCES would be more appropriate.
Will do.
>
> /
> Leif
>
>> + }
>> Status = Host->SendCommand (Host, MMC_CMD8, 0);
>> if (EFI_ERROR (Status)) {
>> DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD fetch error, Status=%r.\n", Status));
>> }
>>
>> - Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)&(MmcHostInstance->CardInfo.ECSDData));
>> + Status = Host->ReadBlockData (Host, 0, 512, (UINT32 *)MmcHostInstance->CardInfo.ECSDData);
>> if (EFI_ERROR (Status)) {
>> DEBUG ((EFI_D_ERROR, "EmmcIdentificationMode(): ECSD read error, Status=%r.\n", Status));
>> return Status;
>> @@ -237,7 +242,7 @@ EmmcIdentificationMode (
>> Media->LogicalBlocksPerPhysicalBlock = 1;
>> Media->IoAlign = 4;
>> // Compute last block using bits [215:212] of the ECSD
>> - Media->LastBlock = MmcHostInstance->CardInfo.ECSDData.SECTOR_COUNT - 1; // eMMC isn't supposed to report this for
>> + Media->LastBlock = MmcHostInstance->CardInfo.ECSDData->SECTOR_COUNT - 1; // eMMC isn't supposed to report this for
>> // Cards <2GB in size, but the model does.
>>
>> // Setup card type
>> @@ -258,7 +263,7 @@ InitializeEmmcDevice (
>> UINT32 TimingMode[4] = {EMMCHS52DDR1V2, EMMCHS52DDR1V8, EMMCHS52, EMMCHS26};
>>
>> Host = MmcHostInstance->MmcHost;
>> - ECSDData = &MmcHostInstance->CardInfo.ECSDData;
>> + ECSDData = MmcHostInstance->CardInfo.ECSDData;
>> if (ECSDData->DEVICE_TYPE == EMMCBACKWARD)
>> return EFI_SUCCESS;
>>
>> --
>> 1.9.1
>>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-06-29 14:32 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-06-29 9:03 [PATCH] EmbeddedPkg/MmcDxe: Align the ExtCSD buffer Jun Nie
2017-06-29 11:11 ` Leif Lindholm
2017-06-29 14:33 ` Jun Nie
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox