From: Brijesh Singh <brijesh.singh@amd.com>
To: edk2-devel@lists.01.org
Cc: Brijesh Singh <brijesh.singh@amd.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Jordan Justen <jordan.l.justen@intel.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
Laszlo Ersek <lersek@redhat.com>
Subject: [PATCH v2 13/23] OvmfPkg/Virtio: take RingBaseShift in VirtioSetQueueAddress()
Date: Mon, 14 Aug 2017 07:36:35 -0400 [thread overview]
Message-ID: <1502710605-8058-14-git-send-email-brijesh.singh@amd.com> (raw)
In-Reply-To: <1502710605-8058-1-git-send-email-brijesh.singh@amd.com>
VirtioRingMap() maps the ring buffer system physical to a bus address.
When an IOMMU is used for translating the address then bus address can
start at a different offset from the system physical address.
- MMIO and legacy virtio device does not use IOMMU to translate the
addresses hence RingBaseShift will always be set to zero.
- modern virtio device use IOMMU to translate the address, in next patch
we will update the Virtio10Dxe to use RingBaseShift offset.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
---
OvmfPkg/Include/Protocol/VirtioDevice.h | 5 ++++-
OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDevice.h | 3 ++-
OvmfPkg/VirtioPciDeviceDxe/VirtioPciDevice.h | 3 ++-
OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceFunctions.c | 5 ++++-
OvmfPkg/Virtio10Dxe/Virtio10.c | 5 ++++-
OvmfPkg/VirtioBlkDxe/VirtioBlk.c | 2 +-
OvmfPkg/VirtioGpuDxe/Commands.c | 3 ++-
OvmfPkg/VirtioNetDxe/SnpInitialize.c | 2 +-
OvmfPkg/VirtioPciDeviceDxe/VirtioPciFunctions.c | 5 ++++-
OvmfPkg/VirtioRngDxe/VirtioRng.c | 2 +-
OvmfPkg/VirtioScsiDxe/VirtioScsi.c | 2 +-
11 files changed, 26 insertions(+), 11 deletions(-)
diff --git a/OvmfPkg/Include/Protocol/VirtioDevice.h b/OvmfPkg/Include/Protocol/VirtioDevice.h
index 14f980d7bf0a..25fd73b847a5 100644
--- a/OvmfPkg/Include/Protocol/VirtioDevice.h
+++ b/OvmfPkg/Include/Protocol/VirtioDevice.h
@@ -156,6 +156,8 @@ EFI_STATUS
@param[in] Ring The initialized VRING object to take the
addresses from.
+ @param[in] RingBaseShift The offset for the Ring Base address.
+
@retval EFI_SUCCESS The data was written successfully.
@retval EFI_UNSUPPORTED The underlying IO device doesn't support the
provided address offset and write size.
@@ -164,7 +166,8 @@ typedef
EFI_STATUS
(EFIAPI *VIRTIO_SET_QUEUE_ADDRESS) (
IN VIRTIO_DEVICE_PROTOCOL *This,
- IN VRING *Ring
+ IN VRING *Ring,
+ IN UINT64 RingBaseShift
);
/**
diff --git a/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDevice.h b/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDevice.h
index b69f6d7b7a85..b5cc091fe820 100644
--- a/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDevice.h
+++ b/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDevice.h
@@ -113,7 +113,8 @@ VirtioMmioSetQueueSel (
EFI_STATUS
VirtioMmioSetQueueAddress (
IN VIRTIO_DEVICE_PROTOCOL *This,
- IN VRING *Ring
+ IN VRING *Ring,
+ IN UINT64 RingBaseShift
);
EFI_STATUS
diff --git a/OvmfPkg/VirtioPciDeviceDxe/VirtioPciDevice.h b/OvmfPkg/VirtioPciDeviceDxe/VirtioPciDevice.h
index 41df5a98e560..1f0dc45d501e 100644
--- a/OvmfPkg/VirtioPciDeviceDxe/VirtioPciDevice.h
+++ b/OvmfPkg/VirtioPciDeviceDxe/VirtioPciDevice.h
@@ -126,7 +126,8 @@ EFI_STATUS
EFIAPI
VirtioPciSetQueueAddress (
IN VIRTIO_DEVICE_PROTOCOL *This,
- IN VRING *Ring
+ IN VRING *Ring,
+ IN UINT64 RingBaseShift
);
EFI_STATUS
diff --git a/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceFunctions.c b/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceFunctions.c
index f3f69f324c6c..3d14b1035e91 100644
--- a/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceFunctions.c
+++ b/OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceFunctions.c
@@ -183,11 +183,14 @@ VirtioMmioSetQueueSel (
EFI_STATUS
VirtioMmioSetQueueAddress (
IN VIRTIO_DEVICE_PROTOCOL *This,
- IN VRING *Ring
+ IN VRING *Ring,
+ IN UINT64 RingBaseShift
)
{
VIRTIO_MMIO_DEVICE *Device;
+ ASSERT (RingBaseShift == 0);
+
Device = VIRTIO_MMIO_DEVICE_FROM_VIRTIO_DEVICE (This);
VIRTIO_CFG_WRITE (Device, VIRTIO_MMIO_OFFSET_QUEUE_PFN,
diff --git a/OvmfPkg/Virtio10Dxe/Virtio10.c b/OvmfPkg/Virtio10Dxe/Virtio10.c
index 413ffa06cf35..d102e1fd8551 100644
--- a/OvmfPkg/Virtio10Dxe/Virtio10.c
+++ b/OvmfPkg/Virtio10Dxe/Virtio10.c
@@ -489,7 +489,8 @@ EFI_STATUS
EFIAPI
Virtio10SetQueueAddress (
IN VIRTIO_DEVICE_PROTOCOL *This,
- IN VRING *Ring
+ IN VRING *Ring,
+ IN UINT64 RingBaseShift
)
{
VIRTIO_1_0_DEV *Dev;
@@ -497,6 +498,8 @@ Virtio10SetQueueAddress (
UINT64 Address;
UINT16 Enable;
+ ASSERT (RingBaseShift == 0);
+
Dev = VIRTIO_1_0_FROM_VIRTIO_DEVICE (This);
Address = (UINTN)Ring->Desc;
diff --git a/OvmfPkg/VirtioBlkDxe/VirtioBlk.c b/OvmfPkg/VirtioBlkDxe/VirtioBlk.c
index 61b9cab4ff02..bff15fe3add1 100644
--- a/OvmfPkg/VirtioBlkDxe/VirtioBlk.c
+++ b/OvmfPkg/VirtioBlkDxe/VirtioBlk.c
@@ -745,7 +745,7 @@ VirtioBlkInit (
//
// step 4c -- Report GPFN (guest-physical frame number) of queue.
//
- Status = Dev->VirtIo->SetQueueAddress (Dev->VirtIo, &Dev->Ring);
+ Status = Dev->VirtIo->SetQueueAddress (Dev->VirtIo, &Dev->Ring, 0);
if (EFI_ERROR (Status)) {
goto ReleaseQueue;
}
diff --git a/OvmfPkg/VirtioGpuDxe/Commands.c b/OvmfPkg/VirtioGpuDxe/Commands.c
index c2e4d72feb67..df8ded99edff 100644
--- a/OvmfPkg/VirtioGpuDxe/Commands.c
+++ b/OvmfPkg/VirtioGpuDxe/Commands.c
@@ -132,7 +132,8 @@ VirtioGpuInit (
if (EFI_ERROR (Status)) {
goto Failed;
}
- Status = VgpuDev->VirtIo->SetQueueAddress (VgpuDev->VirtIo, &VgpuDev->Ring);
+ Status = VgpuDev->VirtIo->SetQueueAddress (VgpuDev->VirtIo,
+ &VgpuDev->Ring, 0);
if (EFI_ERROR (Status)) {
goto ReleaseQueue;
}
diff --git a/OvmfPkg/VirtioNetDxe/SnpInitialize.c b/OvmfPkg/VirtioNetDxe/SnpInitialize.c
index 6d9b81a9f939..0ecfe044a977 100644
--- a/OvmfPkg/VirtioNetDxe/SnpInitialize.c
+++ b/OvmfPkg/VirtioNetDxe/SnpInitialize.c
@@ -96,7 +96,7 @@ VirtioNetInitRing (
//
// step 4c -- report GPFN (guest-physical frame number) of queue
//
- Status = Dev->VirtIo->SetQueueAddress (Dev->VirtIo, Ring);
+ Status = Dev->VirtIo->SetQueueAddress (Dev->VirtIo, Ring, 0);
if (EFI_ERROR (Status)) {
goto ReleaseQueue;
}
diff --git a/OvmfPkg/VirtioPciDeviceDxe/VirtioPciFunctions.c b/OvmfPkg/VirtioPciDeviceDxe/VirtioPciFunctions.c
index 4597095deb78..86f752e1651f 100644
--- a/OvmfPkg/VirtioPciDeviceDxe/VirtioPciFunctions.c
+++ b/OvmfPkg/VirtioPciDeviceDxe/VirtioPciFunctions.c
@@ -183,11 +183,14 @@ EFI_STATUS
EFIAPI
VirtioPciSetQueueAddress (
IN VIRTIO_DEVICE_PROTOCOL *This,
- IN VRING *Ring
+ IN VRING *Ring,
+ IN UINT64 RingBaseShift
)
{
VIRTIO_PCI_DEVICE *Dev;
+ ASSERT (RingBaseShift == 0);
+
Dev = VIRTIO_PCI_DEVICE_FROM_VIRTIO_DEVICE (This);
return VirtioPciIoWrite (Dev, VIRTIO_PCI_OFFSET_QUEUE_ADDRESS, sizeof (UINT32),
diff --git a/OvmfPkg/VirtioRngDxe/VirtioRng.c b/OvmfPkg/VirtioRngDxe/VirtioRng.c
index e20602ac7225..0abca488e6cd 100644
--- a/OvmfPkg/VirtioRngDxe/VirtioRng.c
+++ b/OvmfPkg/VirtioRngDxe/VirtioRng.c
@@ -298,7 +298,7 @@ VirtioRngInit (
//
// step 4c -- Report GPFN (guest-physical frame number) of queue.
//
- Status = Dev->VirtIo->SetQueueAddress (Dev->VirtIo, &Dev->Ring);
+ Status = Dev->VirtIo->SetQueueAddress (Dev->VirtIo, &Dev->Ring, 0);
if (EFI_ERROR (Status)) {
goto ReleaseQueue;
}
diff --git a/OvmfPkg/VirtioScsiDxe/VirtioScsi.c b/OvmfPkg/VirtioScsiDxe/VirtioScsi.c
index c2f6f412ff40..a983b3df7b9c 100644
--- a/OvmfPkg/VirtioScsiDxe/VirtioScsi.c
+++ b/OvmfPkg/VirtioScsiDxe/VirtioScsi.c
@@ -855,7 +855,7 @@ VirtioScsiInit (
//
// step 4c -- Report GPFN (guest-physical frame number) of queue.
//
- Status = Dev->VirtIo->SetQueueAddress (Dev->VirtIo, &Dev->Ring);
+ Status = Dev->VirtIo->SetQueueAddress (Dev->VirtIo, &Dev->Ring, 0);
if (EFI_ERROR (Status)) {
goto ReleaseQueue;
}
--
2.7.4
next prev parent reply other threads:[~2017-08-14 11:34 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-14 11:36 [PATCH v2 00/21] OvmfPkg/Virtio: introduce IOMMU-like member functions Brijesh Singh
2017-08-14 11:36 ` [PATCH v2 01/23] OvmfPkg/VirtioPciDeviceDxe: supply missing BUS_MASTER attribute Brijesh Singh
2017-08-16 0:34 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 02/23] OvmfPkg/Virtio10Dxe: " Brijesh Singh
2017-08-16 0:36 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 03/23] OvmfPkg/VirtioPciDeviceDxe: add missing IN and OUT decoration Brijesh Singh
2017-08-16 0:36 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 04/23] OvmfPkg/VirtioMmioDeviceLib: " Brijesh Singh
2017-08-16 0:37 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 05/23] OvmfPkg/Virtio: fix comment style Brijesh Singh
2017-08-16 0:41 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 06/23] OvmfPkg/Virtio: introduce IOMMU-like member functions to VIRTIO_DEVICE_PROTOCOL Brijesh Singh
2017-08-16 14:37 ` Laszlo Ersek
2017-08-16 15:58 ` Brijesh Singh
2017-08-14 11:36 ` [PATCH v2 07/23] OvmfPkg/Virtio10Dxe: implement IOMMU-like member functions Brijesh Singh
2017-08-16 14:59 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 08/23] OvmfPkg/VirtioPciDeviceDxe: " Brijesh Singh
2017-08-16 15:32 ` Laszlo Ersek
2017-08-16 15:53 ` Brijesh Singh
2017-08-14 11:36 ` [PATCH v2 09/23] OvmfPkg/VirtioMmioDeviceLib: " Brijesh Singh
2017-08-16 15:58 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 10/23] OvmfPkg/VirtioLib: add VirtioMapAllBytesInSharedBuffer() helper function Brijesh Singh
2017-08-16 16:47 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 11/23] OvmfPkg/VirtioLib: take VirtIo instance in VirtioRingInit/VirtioRingUninit Brijesh Singh
2017-08-16 16:53 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 12/23] OvmfPkg/VirtioLib: add functions to map/unmap VRING Brijesh Singh
2017-08-16 20:56 ` Laszlo Ersek
2017-08-14 11:36 ` Brijesh Singh [this message]
2017-08-16 21:43 ` [PATCH v2 13/23] OvmfPkg/Virtio: take RingBaseShift in VirtioSetQueueAddress() Laszlo Ersek
2017-08-16 21:51 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 14/23] OvmfPkg/Virtio10Dxe: add the RingBaseShift offset Brijesh Singh
2017-08-16 21:57 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 15/23] OvmfPkg/VirtioLib: alloc vring buffer with AllocateSharedPages() Brijesh Singh
2017-08-16 22:18 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 16/23] OvmfPkg/VirtioRngDxe: map host address to device address Brijesh Singh
2017-08-21 14:05 ` Laszlo Ersek
2017-08-22 15:44 ` Brijesh Singh
2017-08-22 16:28 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 17/23] OvmfPkg/VirtioBlkDxe: " Brijesh Singh
2017-08-21 15:24 ` Laszlo Ersek
2017-08-22 1:42 ` Brijesh Singh
[not found] ` <1387174d-0040-0072-5e36-c133fd7ec934@redhat.com>
2017-08-22 14:29 ` Brijesh Singh
2017-08-22 15:53 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 18/23] OvmfPkg/VirtioScsiDxe: Use DeviceAddresses in vring descriptors Brijesh Singh
2017-08-21 19:08 ` Laszlo Ersek
2017-08-14 11:36 ` [PATCH v2 19/23] OvmfPkg/VirtioNetDxe: alloc Tx and Rx rings using AllocateSharedPage() Brijesh Singh
2017-08-14 11:36 ` [PATCH v2 20/23] OvmfPkg/VirtioNetDxe: alloc RxBuf using AllocateSharedPages() Brijesh Singh
2017-08-14 11:36 ` [PATCH v2 21/23] OvmfPkg/VirtioNetDxe: dynamically alloc transmit header Brijesh Singh
2017-08-14 11:36 ` [PATCH v2 22/23] OvmfPkg/VirtioNetDxe: map transmit buffer host address to device address Brijesh Singh
2017-08-14 11:36 ` [PATCH v2 23/23] OvmfPkg/Virtio: define VIRITO_F_IOMMU_PLATFORM feature bit Brijesh Singh
2017-08-21 15:40 ` Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502710605-8058-14-git-send-email-brijesh.singh@amd.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox