From: Brijesh Singh <brijesh.singh@amd.com>
To: edk2-devel@lists.01.org
Cc: Brijesh Singh <brijesh.singh@amd.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Jordan Justen <jordan.l.justen@intel.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
Laszlo Ersek <lersek@redhat.com>
Subject: [PATCH v3 05/23] OvmfPkg/VirtioLib: add VirtioMapAllBytesInSharedBuffer() helper function
Date: Wed, 23 Aug 2017 08:22:29 -0400 [thread overview]
Message-ID: <1503490967-5559-6-git-send-email-brijesh.singh@amd.com> (raw)
In-Reply-To: <1503490967-5559-1-git-send-email-brijesh.singh@amd.com>
The function can be used for mapping the system physical address to virtio
device address using VIRTIO_DEVICE_PROTOCOL.MapSharedBuffer (). The
function helps with centralizing error handling, and it allows the caller
to pass in constant or other evaluated expressions for NumberOfBytes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
---
OvmfPkg/Include/Library/VirtioLib.h | 52 ++++++++++++
OvmfPkg/Library/VirtioLib/VirtioLib.c | 85 ++++++++++++++++++++
2 files changed, 137 insertions(+)
diff --git a/OvmfPkg/Include/Library/VirtioLib.h b/OvmfPkg/Include/Library/VirtioLib.h
index 5badfb32917f..9ec9b91b59bb 100644
--- a/OvmfPkg/Include/Library/VirtioLib.h
+++ b/OvmfPkg/Include/Library/VirtioLib.h
@@ -3,6 +3,7 @@
Declarations of utility functions used by virtio device drivers.
Copyright (C) 2012-2016, Red Hat, Inc.
+ Copyright (C) 2017, AMD Inc, All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
@@ -235,4 +236,55 @@ Virtio10WriteFeatures (
IN OUT UINT8 *DeviceStatus
);
+/**
+ Provides the virtio device address required to access system memory from a
+ DMA bus master.
+
+ The interface follows the same usage pattern as defined in UEFI spec 2.6
+ (Section 13.2 PCI Root Bridge I/O Protocol)
+
+ The VirtioMapAllBytesInSharedBuffer() is similar to VIRTIO_MAP_SHARED
+ with exception that NumberOfBytes is IN-only parameter. The function
+ maps all the bytes specified in NumberOfBytes param in one consecutive
+ range.
+
+ @param[in] This The virtio device for which the mapping is
+ requested.
+
+ @param[in] Operation Indicates if the bus master is going to
+ read or write to system memory.
+
+ @param[in] HostAddress The system memory address to map to shared
+ buffer address.
+
+ @param[in] NumberOfBytes Number of bytes to map.
+
+ @param[out] DeviceAddress The resulting shared map address for the
+ bus master to access the hosts HostAddress.
+
+ @param[out] Mapping A resulting token to pass to
+ VIRTIO_UNMAP_SHARED.
+
+
+ @retval EFI_SUCCESS The NumberOfBytes is succesfully mapped.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a
+ common buffer.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to
+ a lack of resources. This includes the case
+ when NumberOfBytes bytes cannot be mapped
+ in one consecutive range.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the
+ requested address.
+**/
+EFI_STATUS
+EFIAPI
+VirtioMapAllBytesInSharedBuffer (
+ IN VIRTIO_DEVICE_PROTOCOL *VirtIo,
+ IN VIRTIO_MAP_OPERATION Operation,
+ IN VOID *HostAddress,
+ IN UINTN NumberOfBytes,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ );
#endif // _VIRTIO_LIB_H_
diff --git a/OvmfPkg/Library/VirtioLib/VirtioLib.c b/OvmfPkg/Library/VirtioLib/VirtioLib.c
index 845f206369a3..c85cd8dba569 100644
--- a/OvmfPkg/Library/VirtioLib/VirtioLib.c
+++ b/OvmfPkg/Library/VirtioLib/VirtioLib.c
@@ -4,6 +4,7 @@
Copyright (C) 2012-2016, Red Hat, Inc.
Portion of Copyright (C) 2013, ARM Ltd.
+ Copyright (C) 2017, AMD Inc, All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
@@ -414,3 +415,87 @@ Virtio10WriteFeatures (
return Status;
}
+
+/**
+ Provides the virtio device address required to access system memory from a
+ DMA bus master.
+
+ The interface follows the same usage pattern as defined in UEFI spec 2.6
+ (Section 13.2 PCI Root Bridge I/O Protocol)
+
+ The VirtioMapAllBytesInSharedBuffer() is similar to VIRTIO_MAP_SHARED
+ with exception that NumberOfBytes is IN-only parameter. The function
+ maps all the bytes specified in NumberOfBytes param in one consecutive
+ range.
+
+ @param[in] This The virtio device for which the mapping is
+ requested.
+
+ @param[in] Operation Indicates if the bus master is going to
+ read or write to system memory.
+
+ @param[in] HostAddress The system memory address to map to shared
+ buffer address.
+
+ @param[in] NumberOfBytes Number of bytes to map.
+
+ @param[out] DeviceAddress The resulting shared map address for the
+ bus master to access the hosts HostAddress.
+
+ @param[out] Mapping A resulting token to pass to
+ VIRTIO_UNMAP_SHARED.
+
+
+ @retval EFI_SUCCESS The NumberOfBytes is succesfully mapped.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a
+ common buffer.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to
+ a lack of resources. This includes the case
+ when NumberOfBytes bytes cannot be mapped
+ in one consecutive range.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the
+ requested address.
+**/
+EFI_STATUS
+EFIAPI
+VirtioMapAllBytesInSharedBuffer (
+ IN VIRTIO_DEVICE_PROTOCOL *VirtIo,
+ IN VIRTIO_MAP_OPERATION Operation,
+ IN VOID *HostAddress,
+ IN UINTN NumberOfBytes,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ )
+{
+ EFI_STATUS Status;
+ VOID *MapInfo;
+ UINTN Size;
+ EFI_PHYSICAL_ADDRESS PhysicalAddress;
+
+ Size = NumberOfBytes;
+ Status = VirtIo->MapSharedBuffer (
+ VirtIo,
+ Operation,
+ HostAddress,
+ &Size,
+ &PhysicalAddress,
+ &MapInfo
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (Size < NumberOfBytes) {
+ goto Failed;
+ }
+
+ *Mapping = MapInfo;
+ *DeviceAddress = PhysicalAddress;
+
+ return EFI_SUCCESS;
+
+Failed:
+ VirtIo->UnmapSharedBuffer (VirtIo, MapInfo);
+ return EFI_OUT_OF_RESOURCES;
+}
--
2.7.4
next prev parent reply other threads:[~2017-08-23 12:20 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-23 12:22 [PATCH v3 00/21] OvmfPkg/Virtio: introduce IOMMU-like member functions Brijesh Singh
2017-08-23 12:22 ` [PATCH v3 01/23] OvmfPkg: introduce IOMMU-like member functions to VIRTIO_DEVICE_PROTOCOL Brijesh Singh
2017-08-23 19:04 ` Laszlo Ersek
2017-08-23 12:22 ` [PATCH v3 02/23] OvmfPkg/Virtio10Dxe: implement IOMMU-like member functions Brijesh Singh
2017-08-23 19:13 ` Laszlo Ersek
2017-08-23 12:22 ` [PATCH v3 03/23] OvmfPkg/VirtioPciDeviceDxe: " Brijesh Singh
2017-08-23 19:16 ` Laszlo Ersek
2017-08-23 12:22 ` [PATCH v3 04/23] OvmfPkg/VirtioMmioDeviceLib: " Brijesh Singh
2017-08-23 19:26 ` Laszlo Ersek
2017-08-23 12:22 ` Brijesh Singh [this message]
2017-08-23 19:45 ` [PATCH v3 05/23] OvmfPkg/VirtioLib: add VirtioMapAllBytesInSharedBuffer() helper function Laszlo Ersek
2017-08-23 12:22 ` [PATCH v3 06/23] OvmfPkg/VirtioLib: take VirtIo instance in VirtioRingInit/VirtioRingUninit Brijesh Singh
2017-08-23 12:22 ` [PATCH v3 07/23] OvmfPkg/Virtio: take RingBaseShift in SetQueueAddress() Brijesh Singh
2017-08-23 20:41 ` Laszlo Ersek
2017-08-23 20:43 ` Laszlo Ersek
2017-08-23 20:50 ` Brijesh Singh
2017-08-23 12:22 ` [PATCH v3 08/23] OvmfPkg/Virtio10Dxe: add the RingBaseShift offset Brijesh Singh
2017-08-23 20:51 ` Laszlo Ersek
2017-08-23 12:22 ` [PATCH v3 09/23] OvmfPkg/VirtioLib: add function to map VRING Brijesh Singh
2017-08-23 20:10 ` Laszlo Ersek
2017-08-23 12:22 ` [PATCH v3 10/23] OvmfPkg/VirtioLib: alloc VRING buffer with AllocateSharedPages() Brijesh Singh
2017-08-23 21:18 ` Laszlo Ersek
2017-08-23 12:22 ` [PATCH v3 11/23] OvmfPkg/VirtioLib: change the parameter of VirtioAppendDesc() to UINT64 Brijesh Singh
2017-08-23 21:38 ` Laszlo Ersek
2017-08-23 12:22 ` [PATCH v3 12/23] OvmfPkg/VirtioRngDxe: map host address to device address Brijesh Singh
2017-08-23 22:54 ` Laszlo Ersek
2017-08-23 12:22 ` [PATCH v3 13/23] OvmfPkg/VirtioBlkDxe: " Brijesh Singh
2017-08-23 12:22 ` [PATCH v3 14/23] OvmfPkg/VirtioScsiDxe: " Brijesh Singh
2017-08-23 12:22 ` [PATCH v3 15/23] OvmfPkg/VirtioNetDxe: alloc Tx and Rx rings using AllocateSharedPage() Brijesh Singh
2017-08-23 12:22 ` [PATCH v3 16/23] OvmfPkg/VirtioNetDxe: alloc RxBuf using AllocateSharedPages() Brijesh Singh
2017-08-23 12:22 ` [PATCH v3 17/23] OvmfPkg/VirtioNetDxe: dynamically alloc transmit header Brijesh Singh
2017-08-23 12:22 ` [PATCH v3 18/23] OvmfPkg/VirtioNetDxe: map transmit buffer host address to device address Brijesh Singh
2017-08-23 12:22 ` [PATCH v3 19/23] OvmfPkg/Virtio10: define VIRITO_F_IOMMU_PLATFORM feature bit Brijesh Singh
2017-08-23 23:04 ` Laszlo Ersek
2017-08-23 12:22 ` [PATCH v3 20/23] OvmfPkg/VirtioRngDxe: negotiate VIRITO_F_IOMMU_PLATFORM Brijesh Singh
2017-08-23 23:21 ` Laszlo Ersek
2017-08-23 23:24 ` Brijesh Singh
2017-08-23 12:22 ` [PATCH v3 21/23] OvmfPkg/VirtioBlkDxe: " Brijesh Singh
2017-08-23 12:22 ` [PATCH v3 22/23] OvmfPkg/VirtioScsiDxe: " Brijesh Singh
2017-08-23 12:22 ` [PATCH v3 23/23] OvmfPkg/VirtioNetDxe: " Brijesh Singh
2017-08-24 0:26 ` [PATCH v3 00/21] OvmfPkg/Virtio: introduce IOMMU-like member functions Laszlo Ersek
2017-08-24 0:54 ` Brijesh Singh
2017-08-24 1:22 ` Laszlo Ersek
2017-08-24 2:06 ` Brijesh Singh
2017-08-24 10:07 ` Laszlo Ersek
2017-08-25 8:58 ` Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1503490967-5559-6-git-send-email-brijesh.singh@amd.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox