From: Jiaxin Wu <jiaxin.wu@intel.com>
To: edk2-devel@lists.01.org
Cc: Ye Ting <ting.ye@intel.com>, Fu Siyuan <siyuan.fu@intel.com>,
Wu Jiaxin <jiaxin.wu@intel.com>
Subject: [Patch 2/2] NetworkPkg/HttpDxe: Clarify the usage of HttpConfigData in HTTP protocol
Date: Thu, 28 Sep 2017 13:41:50 +0800 [thread overview]
Message-ID: <1506577310-40432-3-git-send-email-jiaxin.wu@intel.com> (raw)
In-Reply-To: <1506577310-40432-1-git-send-email-jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
---
NetworkPkg/HttpDxe/HttpImpl.c | 20 +++++++++++---------
NetworkPkg/HttpDxe/HttpImpl.h | 18 ++++++++++--------
2 files changed, 21 insertions(+), 17 deletions(-)
diff --git a/NetworkPkg/HttpDxe/HttpImpl.c b/NetworkPkg/HttpDxe/HttpImpl.c
index c104b61..46d0323 100644
--- a/NetworkPkg/HttpDxe/HttpImpl.c
+++ b/NetworkPkg/HttpDxe/HttpImpl.c
@@ -31,20 +31,22 @@ EFI_HTTP_PROTOCOL mEfiHttpTemplate = {
The GetModeData() function is used to read the current mode data (operational
parameters) for this HTTP protocol instance.
@param[in] This Pointer to EFI_HTTP_PROTOCOL instance.
@param[out] HttpConfigData Point to buffer for operational parameters of this
- HTTP instance.
+ HTTP instance. It is the responsibility of the caller
+ to allocate the memory for HttpConfigData and
+ HttpConfigData->AccessPoint.IPv6Node/IPv4Node. In fact,
+ it is recommended to allocate sufficient memory to record
+ IPv6Node since it is big enough for all possibilities.
@retval EFI_SUCCESS Operation succeeded.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
This is NULL.
HttpConfigData is NULL.
- HttpInstance->LocalAddressIsIPv6 is FALSE and
- HttpConfigData->IPv4Node is NULL.
- HttpInstance->LocalAddressIsIPv6 is TRUE and
- HttpConfigData->IPv6Node is NULL.
+ HttpConfigData->AccessPoint.IPv4Node or
+ HttpConfigData->AccessPoint.IPv6Node is NULL.
@retval EFI_NOT_STARTED This EFI HTTP Protocol instance has not been started.
**/
EFI_STATUS
EFIAPI
@@ -63,12 +65,12 @@ EfiHttpGetModeData (
}
HttpInstance = HTTP_INSTANCE_FROM_PROTOCOL (This);
ASSERT (HttpInstance != NULL);
- if ((HttpInstance->LocalAddressIsIPv6 && HttpConfigData->AccessPoint.IPv6Node == NULL) ||
- (!HttpInstance->LocalAddressIsIPv6 && HttpConfigData->AccessPoint.IPv4Node == NULL)) {
+ if ((HttpConfigData->AccessPoint.IPv6Node == NULL) ||
+ (HttpConfigData->AccessPoint.IPv4Node == NULL)) {
return EFI_INVALID_PARAMETER;
}
if (HttpInstance->State < HTTP_STATE_HTTP_CONFIGED) {
return EFI_NOT_STARTED;
@@ -113,13 +115,13 @@ EfiHttpGetModeData (
@retval EFI_SUCCESS Operation succeeded.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
This is NULL.
HttpConfigData->LocalAddressIsIPv6 is FALSE and
- HttpConfigData->IPv4Node is NULL.
+ HttpConfigData->AccessPoint.IPv4Node is NULL.
HttpConfigData->LocalAddressIsIPv6 is TRUE and
- HttpConfigData->IPv6Node is NULL.
+ HttpConfigData->AccessPoint.IPv6Node is NULL.
@retval EFI_ALREADY_STARTED Reinitialize this HTTP instance without calling
Configure() with NULL to reset it.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
@retval EFI_OUT_OF_RESOURCES Could not allocate enough system resources when
executing Configure().
diff --git a/NetworkPkg/HttpDxe/HttpImpl.h b/NetworkPkg/HttpDxe/HttpImpl.h
index 40b2504..6550ce0 100644
--- a/NetworkPkg/HttpDxe/HttpImpl.h
+++ b/NetworkPkg/HttpDxe/HttpImpl.h
@@ -1,9 +1,9 @@
/** @file
The header files of implementation of EFI_HTTP_PROTOCOL protocol interfaces.
- Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2015 - 2017, Intel Corporation. All rights reserved.<BR>
(C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -31,20 +31,22 @@
The GetModeData() function is used to read the current mode data (operational
parameters) for this HTTP protocol instance.
@param[in] This Pointer to EFI_HTTP_PROTOCOL instance.
@param[out] HttpConfigData Point to buffer for operational parameters of this
- HTTP instance.
+ HTTP instance. It is the responsibility of the caller
+ to allocate the memory for HttpConfigData and
+ HttpConfigData->AccessPoint.IPv6Node/IPv4Node. In fact,
+ it is recommended to allocate sufficient memory to record
+ IPv6Node since it is big enough for all possibilities.
@retval EFI_SUCCESS Operation succeeded.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
This is NULL.
HttpConfigData is NULL.
- HttpInstance->LocalAddressIsIPv6 is FALSE and
- HttpConfigData->IPv4Node is NULL.
- HttpInstance->LocalAddressIsIPv6 is TRUE and
- HttpConfigData->IPv6Node is NULL.
+ HttpConfigData->AccessPoint.IPv4Node or
+ HttpConfigData->AccessPoint.IPv6Node is NULL.
@retval EFI_NOT_STARTED This EFI HTTP Protocol instance has not been started.
**/
EFI_STATUS
EFIAPI
@@ -71,13 +73,13 @@ EfiHttpGetModeData (
@retval EFI_SUCCESS Operation succeeded.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
This is NULL.
HttpConfigData->LocalAddressIsIPv6 is FALSE and
- HttpConfigData->IPv4Node is NULL.
+ HttpConfigData->AccessPoint.IPv4Node is NULL.
HttpConfigData->LocalAddressIsIPv6 is TRUE and
- HttpConfigData->IPv6Node is NULL.
+ HttpConfigData->AccessPoint.IPv6Node is NULL.
@retval EFI_ALREADY_STARTED Reinitialize this HTTP instance without calling
Configure() with NULL to reset it.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
@retval EFI_OUT_OF_RESOURCES Could not allocate enough system resources when
executing Configure().
--
1.9.5.msysgit.1
next prev parent reply other threads:[~2017-09-28 5:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-28 5:41 [Patch 0/2] Clarify the usage of HttpConfigData in HTTP protocol Jiaxin Wu
2017-09-28 5:41 ` [Patch 1/2] MdePkg/Http.h: " Jiaxin Wu
2017-09-28 5:41 ` Jiaxin Wu [this message]
2017-09-28 7:23 ` [Patch 0/2] " Fu, Siyuan
2017-09-28 7:35 ` Ye, Ting
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1506577310-40432-3-git-send-email-jiaxin.wu@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox