From: Eric Dong <eric.dong@intel.com>
To: edk2-devel@lists.01.org
Cc: Jiewen Yao <jiewen.yao@intel.com>, Ruiyu Ni <ruiyu.ni@intel.com>
Subject: [Patch v2 2/2] UefiCpuPkg/PiSmmCpuDxeSmm: Refine code to avoid duplicated code.
Date: Fri, 29 Sep 2017 08:26:36 +0800 [thread overview]
Message-ID: <1506644796-11288-3-git-send-email-eric.dong@intel.com> (raw)
In-Reply-To: <1506644796-11288-1-git-send-email-eric.dong@intel.com>
V2:
Change function parameter to avoid touch global info in function.
Enhance function name, make it more user friendly
V1:
Refine code to avoid duplicate code to set processor register.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
---
UefiCpuPkg/PiSmmCpuDxeSmm/CpuS3.c | 84 +++++++++++----------------------------
1 file changed, 24 insertions(+), 60 deletions(-)
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/CpuS3.c b/UefiCpuPkg/PiSmmCpuDxeSmm/CpuS3.c
index ae4b516..ef72b9b 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/CpuS3.c
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/CpuS3.c
@@ -208,18 +208,30 @@ Returns:
This function programs registers for the calling processor.
- @param RegisterTable Pointer to register table of the running processor.
+ @param RegisterTables Pointer to register table of the running processor.
+ @param RegisterTableCount Register table count.
**/
VOID
SetProcessorRegister (
- IN CPU_REGISTER_TABLE *RegisterTable
+ IN CPU_REGISTER_TABLE *RegisterTables,
+ IN UINTN RegisterTableCount
)
{
CPU_REGISTER_TABLE_ENTRY *RegisterTableEntry;
UINTN Index;
UINTN Value;
SPIN_LOCK *MsrSpinLock;
+ UINT32 InitApicId;
+ CPU_REGISTER_TABLE *RegisterTable;
+
+ InitApicId = GetInitialApicId ();
+ for (Index = 0; Index < RegisterTableCount; Index++) {
+ if (RegisterTables[Index].InitialApicId == InitApicId) {
+ RegisterTable = &RegisterTables[Index];
+ break;
+ }
+ }
//
// Traverse Register Table of this logical processor
@@ -347,36 +359,20 @@ SetProcessorRegister (
}
}
-
-
/**
AP initialization before then after SMBASE relocation in the S3 boot path.
**/
VOID
-MPRendezvousProcedure (
+InitializeAp (
VOID
)
{
- CPU_REGISTER_TABLE *RegisterTableList;
- UINT32 InitApicId;
- UINTN Index;
UINTN TopOfStack;
UINT8 Stack[128];
LoadMtrrData (mAcpiCpuData.MtrrTable);
- //
- // Find processor number for this CPU.
- //
- RegisterTableList = (CPU_REGISTER_TABLE *) (UINTN) mAcpiCpuData.PreSmmInitRegisterTable;
- InitApicId = GetInitialApicId ();
- for (Index = 0; Index < mAcpiCpuData.NumberOfCpus; Index++) {
- if (RegisterTableList[Index].InitialApicId == InitApicId) {
- SetProcessorRegister (&RegisterTableList[Index]);
- break;
- }
- }
-
+ SetProcessorRegister ((CPU_REGISTER_TABLE *) (UINTN) mAcpiCpuData.PreSmmInitRegisterTable, mAcpiCpuData.NumberOfCpus);
//
// Count down the number with lock mechanism.
@@ -393,14 +389,7 @@ MPRendezvousProcedure (
ProgramVirtualWireMode ();
DisableLvtInterrupts ();
- RegisterTableList = (CPU_REGISTER_TABLE *) (UINTN) mAcpiCpuData.RegisterTable;
- InitApicId = GetInitialApicId ();
- for (Index = 0; Index < mAcpiCpuData.NumberOfCpus; Index++) {
- if (RegisterTableList[Index].InitialApicId == InitApicId) {
- SetProcessorRegister (&RegisterTableList[Index]);
- break;
- }
- }
+ SetProcessorRegister ((CPU_REGISTER_TABLE *) (UINTN) mAcpiCpuData.RegisterTable, mAcpiCpuData.NumberOfCpus);
//
// Place AP into the safe code, count down the number with lock mechanism in the safe code.
@@ -475,34 +464,20 @@ PrepareApStartupVector (
**/
VOID
-EarlyInitializeCpu (
+InitializeCpuBeforeRebase (
VOID
)
{
- CPU_REGISTER_TABLE *RegisterTableList;
- UINT32 InitApicId;
- UINTN Index;
-
LoadMtrrData (mAcpiCpuData.MtrrTable);
- //
- // Find processor number for this CPU.
- //
- RegisterTableList = (CPU_REGISTER_TABLE *) (UINTN) mAcpiCpuData.PreSmmInitRegisterTable;
- InitApicId = GetInitialApicId ();
- for (Index = 0; Index < mAcpiCpuData.NumberOfCpus; Index++) {
- if (RegisterTableList[Index].InitialApicId == InitApicId) {
- SetProcessorRegister (&RegisterTableList[Index]);
- break;
- }
- }
+ SetProcessorRegister ((CPU_REGISTER_TABLE *) (UINTN) mAcpiCpuData.PreSmmInitRegisterTable, mAcpiCpuData.NumberOfCpus);
ProgramVirtualWireMode ();
PrepareApStartupVector (mAcpiCpuData.StartupVector);
mNumberToFinish = mAcpiCpuData.NumberOfCpus - 1;
- mExchangeInfo->ApFunction = (VOID *) (UINTN) MPRendezvousProcedure;
+ mExchangeInfo->ApFunction = (VOID *) (UINTN) InitializeAp;
//
// Execute code for before SmmBaseReloc. Note: This flag is maintained across S3 boots.
@@ -527,22 +502,11 @@ EarlyInitializeCpu (
**/
VOID
-InitializeCpu (
+InitializeCpuAfterRebase (
VOID
)
{
- CPU_REGISTER_TABLE *RegisterTableList;
- UINT32 InitApicId;
- UINTN Index;
-
- RegisterTableList = (CPU_REGISTER_TABLE *) (UINTN) mAcpiCpuData.RegisterTable;
- InitApicId = GetInitialApicId ();
- for (Index = 0; Index < mAcpiCpuData.NumberOfCpus; Index++) {
- if (RegisterTableList[Index].InitialApicId == InitApicId) {
- SetProcessorRegister (&RegisterTableList[Index]);
- break;
- }
- }
+ SetProcessorRegister ((CPU_REGISTER_TABLE *) (UINTN) mAcpiCpuData.RegisterTable, mAcpiCpuData.NumberOfCpus);
mNumberToFinish = mAcpiCpuData.NumberOfCpus - 1;
@@ -660,7 +624,7 @@ SmmRestoreCpu (
//
// First time microcode load and restore MTRRs
//
- EarlyInitializeCpu ();
+ InitializeCpuBeforeRebase ();
}
//
@@ -675,7 +639,7 @@ SmmRestoreCpu (
//
// Restore MSRs for BSP and all APs
//
- InitializeCpu ();
+ InitializeCpuAfterRebase ();
}
//
--
2.7.0.windows.1
next prev parent reply other threads:[~2017-09-29 0:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-29 0:26 [Patch v2 0/2] UefiCpuPkg/PiSmmCpuDxeSmm: Enhance S3 code Eric Dong
2017-09-29 0:26 ` [Patch v2 1/2] UefiCpuPkg/PiSmmCpuDxeSmm: Combine INIT-SIPI-SIPI Eric Dong
2017-09-29 0:55 ` Ni, Ruiyu
2017-09-29 0:26 ` Eric Dong [this message]
2017-09-29 0:55 ` [Patch v2 2/2] UefiCpuPkg/PiSmmCpuDxeSmm: Refine code to avoid duplicated code Ni, Ruiyu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1506644796-11288-3-git-send-email-eric.dong@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox