From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, neta@marvell.com, kostap@marvell.com,
jinghua@marvell.com, mw@semihalf.com, jsd@semihalf.com
Subject: [platforms: PATCH 3/5] Marvell/Library: UtmiLib: Move devices description to MvHwDescLib
Date: Fri, 6 Oct 2017 09:51:16 +0200 [thread overview]
Message-ID: <1507276278-3608-4-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1507276278-3608-1-git-send-email-mw@semihalf.com>
This patch introduces UTMI description, using the new structures
and template in MvHwDescLib. This change enables more flexible
addition of multiple CP with UTMI PHY's and also significantly
reduces amount of used PCD's for that purpose. Update PortingGuide
documentation accordingly.
This patch replaces string-based description of Utmi on
Armada 70x0 DB with new, reduced format.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Platform/Marvell/Armada/Armada70x0.dsc | 7 +-
Platform/Marvell/Include/Library/MvHwDescLib.h | 47 ++++++
Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c | 149 ++++++++++----------
Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.h | 1 -
Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.inf | 11 +-
Platform/Marvell/Marvell.dec | 7 +-
Silicon/Marvell/Documentation/PortingGuide.txt | 30 ++--
7 files changed, 142 insertions(+), 110 deletions(-)
diff --git a/Platform/Marvell/Armada/Armada70x0.dsc b/Platform/Marvell/Armada/Armada70x0.dsc
index d9d126d..04bdf7c 100644
--- a/Platform/Marvell/Armada/Armada70x0.dsc
+++ b/Platform/Marvell/Armada/Armada70x0.dsc
@@ -111,11 +111,8 @@
gMarvellTokenSpaceGuid.PcdChip0ComPhySpeeds|{ 0x1, 0x6, 0xA, 0x6, 0x6, 0x6 }
#UtmiPhy
- gMarvellTokenSpaceGuid.PcdUtmiPhyCount|2
- gMarvellTokenSpaceGuid.PcdUtmiPhyRegUsbCfg|L"0xF2440420;0xF2440420"
- gMarvellTokenSpaceGuid.PcdUtmiPhyRegUtmiCfg|L"0xF2440440;0xF2440444"
- gMarvellTokenSpaceGuid.PcdUtmiPhyRegUtmiUnit|L"0xF2580000;0xF2581000"
- gMarvellTokenSpaceGuid.PcdUtmiPhyUtmiPort|L"0x0;0x1"
+ gMarvellTokenSpaceGuid.PcdUtmiControllers|{ 0x1, 0x1 }
+ gMarvellTokenSpaceGuid.PcdUtmiPortType|{ 0x0, 0x1 }
#MDIO
gMarvellTokenSpaceGuid.PcdMdioBaseAddress|0xF212A200
diff --git a/Platform/Marvell/Include/Library/MvHwDescLib.h b/Platform/Marvell/Include/Library/MvHwDescLib.h
index e029b50..6ad1bc2 100644
--- a/Platform/Marvell/Include/Library/MvHwDescLib.h
+++ b/Platform/Marvell/Include/Library/MvHwDescLib.h
@@ -117,6 +117,19 @@ typedef struct {
} MVHW_RTC_DESC;
//
+// UTMI PHY's description template definition
+//
+
+typedef struct {
+ UINT8 UtmiDevCount;
+ UINT32 UtmiPhyId[MVHW_MAX_XHCI_DEVS];
+ UINTN UtmiBaseAddresses[MVHW_MAX_XHCI_DEVS];
+ UINTN UtmiConfigAddresses[MVHW_MAX_XHCI_DEVS];
+ UINTN UtmiUsbConfigAddresses[MVHW_MAX_XHCI_DEVS];
+ UINTN UtmiMuxBitCount[MVHW_MAX_XHCI_DEVS];
+} MVHW_UTMI_DESC;
+
+//
// Platform description of CommonPhy devices
//
#define MVHW_CP0_COMPHY_BASE 0xF2441000
@@ -217,4 +230,38 @@ MVHW_RTC_DESC mA7k8kRtcDescTemplate = {\
{ SIZE_4KB, SIZE_4KB }\
}
+//
+// Platform description of UTMI PHY's
+//
+#define MVHW_CP0_UTMI0_BASE 0xF2580000
+#define MVHW_CP0_UTMI0_CFG_BASE 0xF2440440
+#define MVHW_CP0_UTMI0_USB_CFG_BASE 0xF2440420
+#define MVHW_CP0_UTMI0_ID 0x0
+#define MVHW_CP0_UTMI1_BASE 0xF2581000
+#define MVHW_CP0_UTMI1_CFG_BASE 0xF2440444
+#define MVHW_CP0_UTMI1_USB_CFG_BASE 0xF2440420
+#define MVHW_CP0_UTMI1_ID 0x1
+#define MVHW_CP1_UTMI0_BASE 0xF4580000
+#define MVHW_CP1_UTMI0_CFG_BASE 0xF4440440
+#define MVHW_CP1_UTMI0_USB_CFG_BASE 0xF4440420
+#define MVHW_CP1_UTMI0_ID 0x0
+#define MVHW_CP1_UTMI1_BASE 0xF4581000
+#define MVHW_CP1_UTMI1_CFG_BASE 0xF4440444
+#define MVHW_CP1_UTMI1_USB_CFG_BASE 0xF4440420
+#define MVHW_CP1_UTMI1_ID 0x1
+
+#define DECLARE_A7K8K_UTMI_TEMPLATE \
+STATIC \
+MVHW_UTMI_DESC mA7k8kUtmiDescTemplate = {\
+ 4,\
+ { MVHW_CP0_UTMI0_ID, MVHW_CP0_UTMI1_ID,\
+ MVHW_CP1_UTMI0_ID, MVHW_CP1_UTMI1_ID },\
+ { MVHW_CP0_UTMI0_BASE, MVHW_CP0_UTMI1_BASE,\
+ MVHW_CP1_UTMI0_BASE, MVHW_CP1_UTMI1_BASE },\
+ { MVHW_CP0_UTMI0_CFG_BASE, MVHW_CP0_UTMI1_CFG_BASE,\
+ MVHW_CP1_UTMI0_CFG_BASE, MVHW_CP1_UTMI1_CFG_BASE },\
+ { MVHW_CP0_UTMI0_USB_CFG_BASE, MVHW_CP0_UTMI1_USB_CFG_BASE,\
+ MVHW_CP1_UTMI0_USB_CFG_BASE, MVHW_CP1_UTMI1_USB_CFG_BASE }\
+}
+
#endif /* __MVHWDESCLIB_H__ */
diff --git a/Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c b/Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c
index 95b5698..b07c038 100644
--- a/Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c
+++ b/Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c
@@ -33,12 +33,16 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/
#include "UtmiPhyLib.h"
+#include <Library/MvHwDescLib.h>
+
+DECLARE_A7K8K_UTMI_TEMPLATE;
typedef struct {
EFI_PHYSICAL_ADDRESS UtmiBaseAddr;
EFI_PHYSICAL_ADDRESS UsbCfgAddr;
EFI_PHYSICAL_ADDRESS UtmiCfgAddr;
UINT32 UtmiPhyPort;
+ UINT32 PhyId;
} UTMI_PHY_DATA;
STATIC
@@ -236,48 +240,52 @@ UtmiPhyPowerUp (
STATIC
VOID
Cp110UtmiPhyInit (
- IN UINT32 UtmiPhyCount,
IN UTMI_PHY_DATA *UtmiData
)
{
- UINT32 i;
+ EFI_STATUS Status;
- for (i = 0; i < UtmiPhyCount; i++) {
- UtmiPhyPowerDown(i, UtmiData[i].UtmiBaseAddr,
- UtmiData[i].UsbCfgAddr, UtmiData[i].UtmiCfgAddr,
- UtmiData[i].UtmiPhyPort);
- }
+ UtmiPhyPowerDown (
+ UtmiData->PhyId,
+ UtmiData->UtmiBaseAddr,
+ UtmiData->UsbCfgAddr,
+ UtmiData->UtmiCfgAddr,
+ UtmiData->UtmiPhyPort
+ );
/* Power down PLL */
DEBUG((DEBUG_INFO, "UtmiPhy: stage: PHY power down PLL\n"));
- RegSet (UtmiData[0].UsbCfgAddr, 0x0 << UTMI_USB_CFG_PLL_OFFSET,
- UTMI_USB_CFG_PLL_MASK);
-
- for (i = 0; i < UtmiPhyCount; i++) {
- UtmiPhyConfig(i, UtmiData[i].UtmiBaseAddr,
- UtmiData[i].UsbCfgAddr, UtmiData[i].UtmiCfgAddr,
- UtmiData[i].UtmiPhyPort);
+ MmioAnd32 (UtmiData->UsbCfgAddr, ~UTMI_USB_CFG_PLL_MASK);
+
+ UtmiPhyConfig (
+ UtmiData->PhyId,
+ UtmiData->UtmiBaseAddr,
+ UtmiData->UsbCfgAddr,
+ UtmiData->UtmiCfgAddr,
+ UtmiData->UtmiPhyPort
+ );
+
+ Status = UtmiPhyPowerUp (
+ UtmiData->PhyId,
+ UtmiData->UtmiBaseAddr,
+ UtmiData->UsbCfgAddr,
+ UtmiData->UtmiCfgAddr,
+ UtmiData->UtmiPhyPort
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "UtmiPhy: Failed to initialize UTMI PHY %d\n", UtmiData->PhyId));
+ return;
}
- for (i = 0; i < UtmiPhyCount; i++) {
- if (EFI_ERROR(UtmiPhyPowerUp(i, UtmiData[i].UtmiBaseAddr,
- UtmiData[i].UsbCfgAddr, UtmiData[i].UtmiCfgAddr,
- UtmiData[i].UtmiPhyPort))) {
- DEBUG((DEBUG_ERROR, "UtmiPhy: Failed to initialize UTMI PHY %d\n", i));
- continue;
- }
- DEBUG((DEBUG_ERROR, "UTMI PHY %d initialized to ", i));
-
- if (UtmiData[i].UtmiPhyPort == UTMI_PHY_TO_USB_DEVICE0)
- DEBUG((DEBUG_ERROR, "USB Device\n"));
- else
- DEBUG((DEBUG_ERROR, "USB Host%d\n", UtmiData[i].UtmiPhyPort));
- }
+ DEBUG ((DEBUG_ERROR, "UTMI PHY %d initialized to ", UtmiData->PhyId));
+ if (UtmiData->UtmiPhyPort == UTMI_PHY_TO_USB_DEVICE0)
+ DEBUG((DEBUG_ERROR, "USB Device\n"));
+ else
+ DEBUG((DEBUG_ERROR, "USB Host%d\n", UtmiData->UtmiPhyPort));
/* Power up PLL */
DEBUG((DEBUG_INFO, "UtmiPhy: stage: PHY power up PLL\n"));
- RegSet (UtmiData[0].UsbCfgAddr, 0x1 << UTMI_USB_CFG_PLL_OFFSET,
- UTMI_USB_CFG_PLL_MASK);
+ MmioOr32 (UtmiData->UsbCfgAddr, UTMI_USB_CFG_PLL_MASK);
}
EFI_STATUS
@@ -285,69 +293,66 @@ UtmiPhyInit (
VOID
)
{
- EFI_STATUS Status;
- UTMI_PHY_DATA UtmiData[PcdGet32 (PcdUtmiPhyCount)];
- EFI_PHYSICAL_ADDRESS RegUtmiUnit[PcdGet32 (PcdUtmiPhyCount)];
- EFI_PHYSICAL_ADDRESS RegUsbCfg[PcdGet32 (PcdUtmiPhyCount)];
- EFI_PHYSICAL_ADDRESS RegUtmiCfg[PcdGet32 (PcdUtmiPhyCount)];
- UINTN UtmiPort[PcdGet32 (PcdUtmiPhyCount)];
- UINTN i, Count;
-
- Count = PcdGet32 (PcdUtmiPhyCount);
- if (Count == 0) {
+ UTMI_PHY_DATA UtmiData;
+ UINT8 *UtmiDeviceTable, *XhciDeviceTable, *UtmiPortType, Index;
+ MVHW_UTMI_DESC *Desc = &mA7k8kUtmiDescTemplate;
+
+ /* Obtain table with enabled Utmi PHY's*/
+ UtmiDeviceTable = (UINT8 *)PcdGetPtr (PcdUtmiControllers);
+ if (UtmiDeviceTable == NULL) {
/* No UTMI PHY on platform */
return EFI_SUCCESS;
}
- DEBUG((DEBUG_INFO, "UtmiPhy: Initialize USB UTMI PHYs\n"));
- /* Parse UtmiPhy PCDs */
- Status = ParsePcdString ((CHAR16 *) PcdGetPtr (PcdUtmiPhyRegUtmiUnit),
- Count, RegUtmiUnit, NULL);
- if (EFI_ERROR(Status)) {
- DEBUG((DEBUG_ERROR, "UtmiPhy: Wrong PcdUtmiPhyRegUtmiUnit format\n"));
+ if (PcdGetSize (PcdUtmiControllers) > MVHW_MAX_XHCI_DEVS) {
+ DEBUG ((DEBUG_ERROR, "UTMI: Wrong PcdUtmiControllers format\n"));
return EFI_INVALID_PARAMETER;
}
- Status = ParsePcdString ((CHAR16 *) PcdGetPtr (PcdUtmiPhyRegUsbCfg),
- Count, RegUsbCfg, NULL);
- if (EFI_ERROR(Status)) {
- DEBUG((DEBUG_ERROR, "UtmiPhy: Wrong PcdUtmiPhyRegUsbCfg format\n"));
+ /* Make sure XHCI controllers table is present */
+ XhciDeviceTable = (UINT8 *)PcdGetPtr (PcdPciEXhci);
+ if (XhciDeviceTable == NULL) {
+ DEBUG ((DEBUG_ERROR, "UTMI: Missing PcdPciEXhci\n"));
return EFI_INVALID_PARAMETER;
}
- Status = ParsePcdString ((CHAR16 *) PcdGetPtr (PcdUtmiPhyRegUtmiCfg),
- Count, RegUtmiCfg, NULL);
- if (EFI_ERROR(Status)) {
- DEBUG((DEBUG_ERROR, "UtmiPhy: Wrong PcdUtmiPhyRegUtmiCfg format\n"));
+ /* Obtain port type table */
+ UtmiPortType = (UINT8 *)PcdGetPtr (PcdUtmiPortType);
+ if (UtmiPortType == NULL || PcdGetSize (PcdUtmiPortType) != PcdGetSize (PcdUtmiControllers)) {
+ DEBUG ((DEBUG_ERROR, "UTMI: Wrong PcdUtmiPortType format\n"));
return EFI_INVALID_PARAMETER;
}
- Status = ParsePcdString ((CHAR16 *) PcdGetPtr (PcdUtmiPhyUtmiPort),
- Count, UtmiPort, NULL);
- if (EFI_ERROR(Status)) {
- DEBUG((DEBUG_ERROR, "UtmiPhy: Wrong PcdUtmiPhyUtmiPort format\n"));
- return EFI_INVALID_PARAMETER;
- }
+ /* Initialize enabled chips */
+ for (Index = 0; Index < PcdGetSize (PcdUtmiControllers); Index++) {
+ if (!MVHW_DEV_ENABLED (Utmi, Index)) {
+ continue;
+ }
+
+ /* UTMI PHY without enabled XHCI controller is useless */
+ if (!MVHW_DEV_ENABLED (Xhci, Index)) {
+ DEBUG ((DEBUG_ERROR, "UTMI: Disabled Xhci controller %d\n", Index));
+ return EFI_INVALID_PARAMETER;
+ }
- for (i = 0 ; i < Count ; i++) {
/* Get base address of UTMI phy */
- UtmiData[i].UtmiBaseAddr = RegUtmiUnit[i];
+ UtmiData.UtmiBaseAddr = Desc->UtmiBaseAddresses[Index];
/* Get usb config address */
- UtmiData[i].UsbCfgAddr = RegUsbCfg[i];
+ UtmiData.UsbCfgAddr = Desc->UtmiUsbConfigAddresses[Index];
/* Get UTMI config address */
- UtmiData[i].UtmiCfgAddr = RegUtmiCfg[i];
+ UtmiData.UtmiCfgAddr = Desc->UtmiConfigAddresses[Index];
- /*
- * Get the usb port number, which will be used to check if
- * the utmi connected to host or device
- */
- UtmiData[i].UtmiPhyPort = UtmiPort[i];
- }
+ /* Get UTMI PHY ID */
+ UtmiData.PhyId = Desc->UtmiPhyId[Index];
- /* Currently only Cp110 is supported */
- Cp110UtmiPhyInit (Count, UtmiData);
+ /* Get the usb port type */
+ UtmiData.UtmiPhyPort = UtmiPortType[Index];
+
+ /* Currently only Cp110 is supported */
+ Cp110UtmiPhyInit (&UtmiData);
+ }
return EFI_SUCCESS;
}
diff --git a/Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.h b/Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.h
index f9b4933..0d7d72e 100644
--- a/Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.h
+++ b/Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.h
@@ -42,7 +42,6 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#include <Library/MemoryAllocationLib.h>
#include <Library/IoLib.h>
#include <Library/TimerLib.h>
-#include <Library/ParsePcdLib.h>
#define UTMI_USB_CFG_DEVICE_EN_OFFSET 0
#define UTMI_USB_CFG_DEVICE_EN_MASK (0x1 << UTMI_USB_CFG_DEVICE_EN_OFFSET)
diff --git a/Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.inf b/Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.inf
index f1e57f4..6e33cdd 100644
--- a/Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.inf
+++ b/Platform/Marvell/Library/UtmiPhyLib/UtmiPhyLib.inf
@@ -50,15 +50,12 @@
DebugLib
IoLib
MemoryAllocationLib
- ParsePcdLib
PcdLib
[Sources.common]
UtmiPhyLib.c
-[FixedPcd]
- gMarvellTokenSpaceGuid.PcdUtmiPhyCount
- gMarvellTokenSpaceGuid.PcdUtmiPhyRegUsbCfg
- gMarvellTokenSpaceGuid.PcdUtmiPhyRegUtmiCfg
- gMarvellTokenSpaceGuid.PcdUtmiPhyRegUtmiUnit
- gMarvellTokenSpaceGuid.PcdUtmiPhyUtmiPort
+[Pcd]
+ gMarvellTokenSpaceGuid.PcdUtmiControllers
+ gMarvellTokenSpaceGuid.PcdUtmiPortType
+ gMarvellTokenSpaceGuid.PcdPciEXhci
diff --git a/Platform/Marvell/Marvell.dec b/Platform/Marvell/Marvell.dec
index 25a4258..00d99fa 100644
--- a/Platform/Marvell/Marvell.dec
+++ b/Platform/Marvell/Marvell.dec
@@ -156,11 +156,8 @@
gMarvellTokenSpaceGuid.PcdChip3ComPhyInvFlags|{ 0x0 }|VOID*|0x30000177
#UtmiPhy
- gMarvellTokenSpaceGuid.PcdUtmiPhyCount|0|UINT32|0x30000205
- gMarvellTokenSpaceGuid.PcdUtmiPhyRegUsbCfg|{ 0x0 }|VOID*|0x30000206
- gMarvellTokenSpaceGuid.PcdUtmiPhyRegUtmiCfg|{ 0x0 }|VOID*|0x30000207
- gMarvellTokenSpaceGuid.PcdUtmiPhyRegUtmiUnit|{ 0x0 }|VOID*|0x30000208
- gMarvellTokenSpaceGuid.PcdUtmiPhyUtmiPort|{ 0x0 }|VOID*|0x30000209
+ gMarvellTokenSpaceGuid.PcdUtmiControllers|{ 0x0 }|VOID*|0x30000206
+ gMarvellTokenSpaceGuid.PcdUtmiPortType|{ 0x0 }|VOID*|0x30000207
#MDIO
gMarvellTokenSpaceGuid.PcdMdioBaseAddress|0|UINT64|0x3000043
diff --git a/Silicon/Marvell/Documentation/PortingGuide.txt b/Silicon/Marvell/Documentation/PortingGuide.txt
index 1a30c46..8a9f603 100644
--- a/Silicon/Marvell/Documentation/PortingGuide.txt
+++ b/Silicon/Marvell/Documentation/PortingGuide.txt
@@ -278,33 +278,23 @@ UTMI PHY configuration
======================
In order to configure UTMI, following PCDs are available:
- - gMarvellTokenSpaceGuid.PcdUtmiPhyCount
- (Indicates how many UTMI PHYs are available on platform)
-
-Next four PCDs are in unicode string format containing settings for all devices
-separated with semicolon.
-
- - gMarvellTokenSpaceGuid.PcdUtmiPhyRegUtmiUnit
- (Indicates base address of the UTMI unit)
-
- - gMarvellTokenSpaceGuid.PcdUtmiPhyRegUsbCfg
- (Indicates address of USB Configuration register)
+ - gMarvellTokenSpaceGuid.PcdUtmiControllers
+ (Array with used controllers
+ Set to 0x1 for enabled, 0x0 for disabled)
- - gMarvellTokenSpaceGuid.PcdUtmiPhyRegUtmiCfg
- (Indicates address of external UTMI configuration)
+ - gMarvellTokenSpaceGuid.PcdUtmiPortType
+ (Indicates type of the connected USB port:
- - gMarvellTokenSpaceGuid.PcdUtmiPhyUtmiPort
- (Indicates type of the connected USB port)
+ UTMI_PHY_TO_USB_HOST0 0
+ UTMI_PHY_TO_USB_HOST1 1
+ UTMI_PHY_TO_USB_DEVICE0 2 )
Example
-------
# UtmiPhy
- gMarvellTokenSpaceGuid.PcdUtmiPhyCount|2
- gMarvellTokenSpaceGuid.PcdUtmiPhyRegUtmiUnit|L"0xF2580000;0xF2581000"
- gMarvellTokenSpaceGuid.PcdUtmiPhyRegUsbCfg|L"0xF2440420;0xF2440420"
- gMarvellTokenSpaceGuid.PcdUtmiPhyRegUtmiCfg|L"0xF2440440;0xF2440444"
- gMarvellTokenSpaceGuid.PcdUtmiPhyUtmiPort|L"0x0;0x1"
+ gMarvellTokenSpaceGuid.PcdUtmiControllers|{ 0x1, 0x1 }
+ gMarvellTokenSpaceGuid.PcdUtmiPortType|{ 0x0, 0x1 }
SPI driver configuration
--
1.8.3.1
next prev parent reply other threads:[~2017-10-06 7:41 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-06 7:51 [platforms: PATCH 0/5] Armada 7k/8k - ParsePcdLib removal Marcin Wojtas
2017-10-06 7:51 ` [platforms: PATCH 1/5] Marvell/Library: ComPhyLib: Remove PCD string parsing Marcin Wojtas
2017-10-06 15:52 ` Leif Lindholm
2017-10-06 19:22 ` Marcin Wojtas
2017-10-06 19:51 ` Leif Lindholm
2017-10-06 20:08 ` Marcin Wojtas
2017-10-07 14:17 ` Marcin Wojtas
2017-10-07 14:57 ` Leif Lindholm
2017-10-06 7:51 ` [platforms: PATCH 2/5] Marvell/Drivers: MvI2cDxe: Move devices description to MvHwDescLib Marcin Wojtas
2017-10-06 15:56 ` Leif Lindholm
2017-10-06 19:24 ` Marcin Wojtas
2017-10-06 7:51 ` Marcin Wojtas [this message]
2017-10-06 15:57 ` [platforms: PATCH 3/5] Marvell/Library: UtmiLib: " Leif Lindholm
2017-10-06 19:26 ` Marcin Wojtas
2017-10-06 19:57 ` Leif Lindholm
2017-10-06 7:51 ` [platforms: PATCH 4/5] Marvell/Drivers: Pp2Dxe: Rework PHY handling Marcin Wojtas
2017-10-06 16:02 ` Leif Lindholm
2017-10-06 19:30 ` Marcin Wojtas
2017-10-06 7:51 ` [platforms: PATCH 5/5] Platform/Marvell/Armada: Remove ParsePcdLib Marcin Wojtas
2017-10-06 16:02 ` Leif Lindholm
2017-10-06 14:29 ` [platforms: PATCH 0/5] Armada 7k/8k - ParsePcdLib removal Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1507276278-3608-4-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox