[platforms: PATCH v2 4/5] Marvell/Drivers: Pp2Dxe: Rework PHY handling

[Marcin Wojtas <mw@semihalf.com>]

Hitherto PHY handling in Pp2Dxe was not flexible. It allowed for using
only single MDIO controller, which may not be true on Armada 80x0 SoCs.
For this purpose introduce the MDIO description, using the new structures
and template in MvHwDescLib. This change enables addition of multiple
CP110 hardware blocks with MDIO controllers.

This change required different PHY handling and obtaining data over
desired MDIO bus. Now given Pp2 port is matched with the PHY via
its index in gMarvellTokenSpaceGuid.PcdPhyDeviceIds. The PHY itself
is mapped to the MDIO controller, using
gMarvellTokenSpaceGuid.PcdPhy2MdioController. Also obtaining
SMI addresses was moved to the PHY initialization routine.
All above allow for much cleaner and logical PHY description
in the .dsc file, which now uses macros for connection type
and speed.

Update PortingGuide documentation accordingly and Armada 70x0 DB
NIC/PHY description.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
 Platform/Marvell/Armada/Armada.dsc.inc                 |  18 +++
 Platform/Marvell/Armada/Armada70x0.dsc                 |  10 +-
 Platform/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.c     |  35 ++++--
 Platform/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.inf   |   3 -
 Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.c   | 122 ++++++++++++--------
 Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.h   |   2 -
 Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.inf |   4 +-
 Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.c           |  16 +--
 Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.h           |   2 +-
 Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.inf         |   4 +-
 Platform/Marvell/Include/Library/MvHwDescLib.h         |  23 ++++
 Platform/Marvell/Include/Protocol/Mdio.h               |   6 +
 Platform/Marvell/Include/Protocol/MvPhy.h              |   1 +
 Platform/Marvell/Marvell.dec                           |   8 +-
 Silicon/Marvell/Documentation/PortingGuide.txt         |  66 +++++------
 15 files changed, 203 insertions(+), 117 deletions(-)

diff --git a/Platform/Marvell/Armada/Armada.dsc.inc b/Platform/Marvell/Armada/Armada.dsc.inc
index 7d0dc39..7258017 100644
--- a/Platform/Marvell/Armada/Armada.dsc.inc
+++ b/Platform/Marvell/Armada/Armada.dsc.inc
@@ -524,6 +524,24 @@
   DEFINE CP_RXAUI1          = 0x16
   DEFINE CP_SFI             = 0x17
 
+  #Network interface speed
+  DEFINE PHY_SPEED_10       = 0x1
+  DEFINE PHY_SPEED_100      = 0x2
+  DEFINE PHY_SPEED_1000     = 0x3
+  DEFINE PHY_SPEED_2500     = 0x4
+  DEFINE PHY_SPEED_10000    = 0x5
+
+  #Network PHY type
+  DEFINE PHY_RGMII          = 0x0
+  DEFINE PHY_RGMII_ID       = 0x1
+  DEFINE PHY_RGMII_TXID     = 0x2
+  DEFINE PHY_RGMII_RXID     = 0x3
+  DEFINE PHY_SGMII          = 0x4
+  DEFINE PHY_RTBI           = 0x5
+  DEFINE PHY_XAUI           = 0x6
+  DEFINE PHY_RXAUI          = 0x7
+  DEFINE PHY_SFI            = 0x8
+
   #UTMI PHY connection type
   DEFINE UTMI_USB_HOST0     = 0x0
   DEFINE UTMI_USB_HOST1     = 0x1
diff --git a/Platform/Marvell/Armada/Armada70x0.dsc b/Platform/Marvell/Armada/Armada70x0.dsc
index b40766b..430803c 100644
--- a/Platform/Marvell/Armada/Armada70x0.dsc
+++ b/Platform/Marvell/Armada/Armada70x0.dsc
@@ -115,18 +115,20 @@
   gMarvellTokenSpaceGuid.PcdUtmiPortType|{ $(UTMI_USB_HOST0), $(UTMI_USB_HOST1) }
 
   #MDIO
-  gMarvellTokenSpaceGuid.PcdMdioBaseAddress|0xF212A200
+  gMarvellTokenSpaceGuid.PcdMdioControllersEnabled|{ 0x1, 0x0 }
 
   #PHY
-  gMarvellTokenSpaceGuid.PcdPhyConnectionTypes|{ 0x8, 0x4, 0x0 }
+  gMarvellTokenSpaceGuid.PcdPhy2MdioController|{ 0x0, 0x0 }
   gMarvellTokenSpaceGuid.PcdPhyDeviceIds|{ 0x0, 0x0 }
+  gMarvellTokenSpaceGuid.PcdPhySmiAddresses|{ 0x0, 0x1 }
   gMarvellTokenSpaceGuid.PcdPhyStartupAutoneg|FALSE
 
   #NET
-  gMarvellTokenSpaceGuid.PcdPhySmiAddresses|{ 0xff, 0x0, 0x1 }
   gMarvellTokenSpaceGuid.PcdPp2GopIndexes|{ 0x0, 0x2, 0x3 }
   gMarvellTokenSpaceGuid.PcdPp2InterfaceAlwaysUp|{ 0x0, 0x0, 0x0 }
-  gMarvellTokenSpaceGuid.PcdPp2InterfaceSpeed|{ 0x5, 0x3, 0x3 }
+  gMarvellTokenSpaceGuid.PcdPp2InterfaceSpeed|{ $(PHY_SPEED_10000), $(PHY_SPEED_1000), $(PHY_SPEED_1000) }
+  gMarvellTokenSpaceGuid.PcdPp2PhyConnectionTypes|{ $(PHY_SFI), $(PHY_SGMII), $(PHY_RGMII) }
+  gMarvellTokenSpaceGuid.PcdPp2PhyIndexes|{ 0xFF, 0x0, 0x1 }
   gMarvellTokenSpaceGuid.PcdPp2Port2Controller|{ 0x0, 0x0, 0x0 }
   gMarvellTokenSpaceGuid.PcdPp2PortIds|{ 0x0, 0x1, 0x2 }
   gMarvellTokenSpaceGuid.PcdPp2Controllers|{ 0x1 }
diff --git a/Platform/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.c b/Platform/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.c
index ae466d7..12aabad 100644
--- a/Platform/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.c
+++ b/Platform/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.c
@@ -46,7 +46,7 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 #include "MvMdioDxe.h"
 
-UINT64 MdioBase = 0;
+DECLARE_A7K8K_MDIO_TEMPLATE;
 
 STATIC
 EFI_STATUS
@@ -70,7 +70,7 @@ MdioCheckParam (
 STATIC
 EFI_STATUS
 MdioWaitReady (
-  VOID
+  UINT32 MdioBase
   )
 {
   UINT32 Timeout = MVEBU_SMI_TIMEOUT;
@@ -92,7 +92,7 @@ MdioWaitReady (
 STATIC
 EFI_STATUS
 MdioWaitValid (
-  VOID
+  UINT32 MdioBase
   )
 {
   UINT32 Timeout = MVEBU_SMI_TIMEOUT;
@@ -116,11 +116,13 @@ EFI_STATUS
 MdioOperation (
   IN CONST MARVELL_MDIO_PROTOCOL *This,
   IN UINT32 PhyAddr,
+  IN UINT32 MdioIndex,
   IN UINT32 RegOff,
   IN BOOLEAN Write,
   IN OUT UINT32 *Data
   )
 {
+  UINT32 MdioBase = This->BaseAddresses[MdioIndex];
   UINT32 MdioReg;
   EFI_STATUS Status;
 
@@ -131,7 +133,7 @@ MdioOperation (
   }
 
   /* wait till the SMI is not busy */
-  Status = MdioWaitReady ();
+  Status = MdioWaitReady (MdioBase);
   if (EFI_ERROR(Status)) {
     DEBUG((DEBUG_ERROR, "MdioDxe: MdioWaitReady error\n"));
     return Status;
@@ -151,7 +153,7 @@ MdioOperation (
   MdioRegWrite32 (MdioReg, MdioBase);
 
   /* make sure that the write transaction  is over */
-  Status = Write ? MdioWaitReady () : MdioWaitValid ();
+  Status = Write ? MdioWaitReady (MdioBase) : MdioWaitValid (MdioBase);
   if (EFI_ERROR(Status)) {
     DEBUG((DEBUG_ERROR, "MdioDxe: MdioWaitReady error\n"));
     return Status;
@@ -169,6 +171,7 @@ EFI_STATUS
 MvMdioRead (
   IN CONST MARVELL_MDIO_PROTOCOL *This,
   IN UINT32 PhyAddr,
+  IN UINT32 MdioIndex,
   IN UINT32 RegOff,
   IN UINT32 *Data
   )
@@ -178,6 +181,7 @@ MvMdioRead (
   Status = MdioOperation (
             This,
             PhyAddr,
+            MdioIndex,
             RegOff,
             FALSE,
             Data
@@ -190,6 +194,7 @@ EFI_STATUS
 MvMdioWrite (
   IN CONST MARVELL_MDIO_PROTOCOL *This,
   IN UINT32 PhyAddr,
+  IN UINT32 MdioIndex,
   IN UINT32 RegOff,
   IN UINT32 Data
   )
@@ -197,6 +202,7 @@ MvMdioWrite (
   return MdioOperation (
             This,
             PhyAddr,
+            MdioIndex,
             RegOff,
             TRUE,
             &Data
@@ -210,18 +216,27 @@ MvMdioDxeInitialise (
   IN EFI_SYSTEM_TABLE  *SystemTable
   )
 {
+  MVHW_MDIO_DESC *Desc = &mA7k8kMdioDescTemplate;
+  UINT8 Index;
   MARVELL_MDIO_PROTOCOL *Mdio;
   EFI_STATUS Status;
   EFI_HANDLE Handle = NULL;
 
   Mdio = AllocateZeroPool (sizeof (MARVELL_MDIO_PROTOCOL));
+  if (Mdio == NULL) {
+    DEBUG ((DEBUG_ERROR, "MdioDxe: Protocol allocation failed\n"));
+    return EFI_OUT_OF_RESOURCES;
+  }
+
+  /* Obtain base addresses of all possible controllers */
+  for (Index = 0; Index < Desc->MdioDevCount; Index++) {
+    Mdio->BaseAddresses[Index] = Desc->MdioBaseAddresses[Index];
+  }
+
+  Mdio->ControllerCount = Desc->MdioDevCount;
   Mdio->Read = MvMdioRead;
   Mdio->Write = MvMdioWrite;
-  MdioBase = PcdGet64 (PcdMdioBaseAddress);
-  if (MdioBase == 0) {
-    DEBUG((DEBUG_ERROR, "MdioDxe: PcdMdioBaseAddress not set\n"));
-    return EFI_INVALID_PARAMETER;
-  }
+
   Status = gBS->InstallMultipleProtocolInterfaces (
                   &Handle,
                   &gMarvellMdioProtocolGuid, Mdio,
diff --git a/Platform/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.inf b/Platform/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.inf
index faab1f7..d9878eb 100644
--- a/Platform/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.inf
+++ b/Platform/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.inf
@@ -62,8 +62,5 @@
 [Protocols]
   gMarvellMdioProtocolGuid
 
-[Pcd]
-  gMarvellTokenSpaceGuid.PcdMdioBaseAddress
-
 [Depex]
   TRUE
diff --git a/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.c b/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.c
index aeb6f7a..e776a91 100644
--- a/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.c
+++ b/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.c
@@ -41,6 +41,7 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 #include <Library/DebugLib.h>
 #include <Library/IoLib.h>
 #include <Library/MemoryAllocationLib.h>
+#include <Library/MvHwDescLib.h>
 #include <Library/PcdLib.h>
 #include <Library/UefiBootServicesTableLib.h>
 #include <Library/UefiLib.h>
@@ -51,6 +52,19 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 STATIC MARVELL_MDIO_PROTOCOL *Mdio;
 
+//
+// Table with available Mdio controllers
+//
+STATIC UINT8 * CONST MdioDeviceTable = PcdGetPtr (PcdMdioControllersEnabled);
+//
+// Table with PHY to Mdio controller mappings
+//
+STATIC UINT8 * CONST Phy2MdioController = PcdGetPtr (PcdPhy2MdioController);
+//
+// Table with PHYs' SMI addresses
+//
+STATIC UINT8 * CONST PhySmiAddresses = PcdGetPtr (PcdPhySmiAddresses);
+
 STATIC MV_PHY_DEVICE MvPhyDevices[] = {
   { MV_PHY_DEVICE_1512, MvPhyInit1512 },
   { 0, NULL }
@@ -64,18 +78,18 @@ MvPhyStatus (
 
 EFI_STATUS
 MvPhyReset (
-  IN UINT32 PhyAddr
+  IN PHY_DEVICE *PhyDev
   )
 {
   UINT32 Reg = 0;
   INTN timeout = TIMEOUT;
 
-  Mdio->Read(Mdio, PhyAddr, MII_BMCR, &Reg);
+  Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MII_BMCR, &Reg);
   Reg |= BMCR_RESET;
-  Mdio->Write(Mdio, PhyAddr, MII_BMCR, Reg);
+  Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MII_BMCR, Reg);
 
   while ((Reg & BMCR_RESET) && timeout--) {
-    Mdio->Read(Mdio, PhyAddr, MII_BMCR, &Reg);
+    Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MII_BMCR, &Reg);
     gBS->Stall(1000);
   }
 
@@ -99,7 +113,7 @@ MvPhyM88e1111sConfig (
       (PhyDev->Connection == PHY_CONNECTION_RGMII_ID) ||
       (PhyDev->Connection == PHY_CONNECTION_RGMII_RXID) ||
       (PhyDev->Connection == PHY_CONNECTION_RGMII_TXID)) {
-    Mdio->Read(Mdio, PhyDev->Addr, MIIM_88E1111_PHY_EXT_CR, &Reg);
+    Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1111_PHY_EXT_CR, &Reg);
 
     if ((PhyDev->Connection == PHY_CONNECTION_RGMII) ||
       (PhyDev->Connection == PHY_CONNECTION_RGMII_ID)) {
@@ -112,9 +126,9 @@ MvPhyM88e1111sConfig (
       Reg |= MIIM_88E1111_TX_DELAY;
     }
 
-    Mdio->Write(Mdio, PhyDev->Addr, MIIM_88E1111_PHY_EXT_CR, Reg);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1111_PHY_EXT_CR, Reg);
 
-    Mdio->Read(Mdio, PhyDev->Addr, MIIM_88E1111_PHY_EXT_SR, &Reg);
+    Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1111_PHY_EXT_SR, &Reg);
 
     Reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK);
 
@@ -123,50 +137,50 @@ MvPhyM88e1111sConfig (
     else
       Reg |= MIIM_88E1111_HWCFG_MODE_COPPER_RGMII;
 
-    Mdio->Write(Mdio, PhyDev->Addr, MIIM_88E1111_PHY_EXT_SR, Reg);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1111_PHY_EXT_SR, Reg);
   }
 
   if (PhyDev->Connection == PHY_CONNECTION_SGMII) {
-    Mdio->Read(Mdio, PhyDev->Addr, MIIM_88E1111_PHY_EXT_SR, &Reg);
+    Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1111_PHY_EXT_SR, &Reg);
 
     Reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK);
     Reg |= MIIM_88E1111_HWCFG_MODE_SGMII_NO_CLK;
     Reg |= MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO;
 
-    Mdio->Write(Mdio, PhyDev->Addr, MIIM_88E1111_PHY_EXT_SR, Reg);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1111_PHY_EXT_SR, Reg);
   }
 
   if (PhyDev->Connection == PHY_CONNECTION_RTBI) {
-    Mdio->Read(Mdio, PhyDev->Addr, MIIM_88E1111_PHY_EXT_CR, &Reg);
+    Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1111_PHY_EXT_CR, &Reg);
     Reg |= (MIIM_88E1111_RX_DELAY | MIIM_88E1111_TX_DELAY);
-    Mdio->Write(Mdio, PhyDev->Addr, MIIM_88E1111_PHY_EXT_CR, Reg);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1111_PHY_EXT_CR, Reg);
 
-    Mdio->Read(Mdio, PhyDev->Addr, MIIM_88E1111_PHY_EXT_SR, &Reg);
+    Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1111_PHY_EXT_SR, &Reg);
     Reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK |
       MIIM_88E1111_HWCFG_FIBER_COPPER_RES);
     Reg |= 0x7 | MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO;
-    Mdio->Write(Mdio, PhyDev->Addr, MIIM_88E1111_PHY_EXT_SR, Reg);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1111_PHY_EXT_SR, Reg);
 
     /* Soft reset */
-    MvPhyReset(PhyDev->Addr);
+    MvPhyReset (PhyDev);
 
-    Mdio->Read(Mdio, PhyDev->Addr, MIIM_88E1111_PHY_EXT_SR, &Reg);
+    Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1111_PHY_EXT_SR, &Reg);
     Reg &= ~(MIIM_88E1111_HWCFG_MODE_MASK |
       MIIM_88E1111_HWCFG_FIBER_COPPER_RES);
     Reg |= MIIM_88E1111_HWCFG_MODE_COPPER_RTBI |
       MIIM_88E1111_HWCFG_FIBER_COPPER_AUTO;
-    Mdio->Write(Mdio, PhyDev->Addr, MIIM_88E1111_PHY_EXT_SR, Reg);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1111_PHY_EXT_SR, Reg);
   }
 
-  Mdio->Read(Mdio, PhyDev->Addr, MII_BMCR, &Reg);
+  Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MII_BMCR, &Reg);
   Reg |= (BMCR_ANENABLE | BMCR_ANRESTART);
   Reg &= ~BMCR_ISOLATE;
-  Mdio->Write(Mdio, PhyDev->Addr, MII_BMCR, Reg);
+  Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MII_BMCR, Reg);
 
   /* Soft reset */
-  MvPhyReset(PhyDev->Addr);
+  MvPhyReset (PhyDev);
 
-  MvPhyReset(PhyDev->Addr);
+  MvPhyReset (PhyDev);
 
   return EFI_SUCCESS;
 }
@@ -179,7 +193,7 @@ MvPhyParseStatus (
   UINT32 Data;
   UINT32 Speed;
 
-  Mdio->Read(Mdio, PhyDev->Addr, MIIM_88E1xxx_PHY_STATUS, &Data);
+  Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1xxx_PHY_STATUS, &Data);
 
   if ((Data & MIIM_88E1xxx_PHYSTAT_LINK) &&
     !(Data & MIIM_88E1xxx_PHYSTAT_SPDDONE)) {
@@ -196,7 +210,7 @@ MvPhyParseStatus (
       if ((i++ % 1000) == 0)
         DEBUG((DEBUG_ERROR, "."));
       gBS->Stall(1000);
-      Mdio->Read(Mdio, PhyDev->Addr, MIIM_88E1xxx_PHY_STATUS, &Data);
+      Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MIIM_88E1xxx_PHY_STATUS, &Data);
     }
     DEBUG((DEBUG_ERROR," done\n"));
     gBS->Stall(500000);
@@ -241,7 +255,7 @@ MvPhyParseStatus (
 STATIC
 VOID
 MvPhy1512WriteBits (
-  IN UINT32 PhyAddr,
+  IN PHY_DEVICE *PhyDev,
   IN UINT8 RegNum,
   IN UINT16 Offset,
   IN UINT16 Len,
@@ -254,19 +268,18 @@ MvPhy1512WriteBits (
   else
     Mask = (1 << (Len + Offset)) - (1 << Offset);
 
-  Mdio->Read(Mdio, PhyAddr, RegNum, &Reg);
+  Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, RegNum, &Reg);
 
   Reg &= ~Mask;
   Reg |= Data << Offset;
 
-  Mdio->Write(Mdio, PhyAddr, RegNum, Reg);
+  Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, RegNum, Reg);
 }
 
 STATIC
 EFI_STATUS
 MvPhyInit1512 (
     IN CONST MARVELL_PHY_PROTOCOL *Snp,
-    IN UINT32 PhyAddr,
     IN OUT PHY_DEVICE *PhyDev
     )
 {
@@ -278,28 +291,28 @@ MvPhyInit1512 (
      * Marvell Release Notes - Alaska 88E1510/88E1518/88E1512 Rev A0,
      * Errata Section 3.1 - needed in SGMII mode.
      */
-    Mdio->Write(Mdio, PhyAddr, 22, 0x00ff);
-    Mdio->Write(Mdio, PhyAddr, 17, 0x214B);
-    Mdio->Write(Mdio, PhyAddr, 16, 0x2144);
-    Mdio->Write(Mdio, PhyAddr, 17, 0x0C28);
-    Mdio->Write(Mdio, PhyAddr, 16, 0x2146);
-    Mdio->Write(Mdio, PhyAddr, 17, 0xB233);
-    Mdio->Write(Mdio, PhyAddr, 16, 0x214D);
-    Mdio->Write(Mdio, PhyAddr, 17, 0xCC0C);
-    Mdio->Write(Mdio, PhyAddr, 16, 0x2159);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, 22, 0x00ff);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, 17, 0x214B);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, 16, 0x2144);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, 17, 0x0C28);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, 16, 0x2146);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, 17, 0xB233);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, 16, 0x214D);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, 17, 0xCC0C);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, 16, 0x2159);
 
     /* Reset page selection and select page 0x12 */
-    Mdio->Write(Mdio, PhyAddr, 22, 0x0000);
-    Mdio->Write(Mdio, PhyAddr, 22, 0x0012);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, 22, 0x0000);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, 22, 0x0012);
 
     /* Write HWCFG_MODE = SGMII to Copper */
-    MvPhy1512WriteBits(PhyAddr, 20, 0, 3, 1);
+    MvPhy1512WriteBits(PhyDev, 20, 0, 3, 1);
 
     /* Phy reset - necessary after changing mode */
-    MvPhy1512WriteBits(PhyAddr, 20, 15, 1, 1);
+    MvPhy1512WriteBits(PhyDev, 20, 15, 1, 1);
 
     /* Reset page selection */
-    Mdio->Write(Mdio, PhyAddr, 22, 0x0000);
+    Mdio->Write (Mdio, PhyDev->Addr, PhyDev->MdioIndex, 22, 0x0000);
     gBS->Stall(100);
   }
 
@@ -309,7 +322,7 @@ MvPhyInit1512 (
   if (!PcdGetBool (PcdPhyStartupAutoneg))
     return EFI_SUCCESS;
 
-  Mdio->Read(Mdio, PhyAddr, MII_BMSR, &Data);
+  Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MII_BMSR, &Data);
 
   if ((Data & BMSR_ANEGCAPABLE) && !(Data & BMSR_ANEGCOMPLETE)) {
 
@@ -322,12 +335,12 @@ MvPhyInit1512 (
       }
 
       gBS->Stall(1000);  /* 1 ms */
-      Mdio->Read(Mdio, PhyAddr, MII_BMSR, &Data);
+      Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MII_BMSR, &Data);
     }
     PhyDev->LinkUp = TRUE;
     DEBUG((DEBUG_INFO, "MvPhyDxe: link up\n"));
   } else {
-    Mdio->Read(Mdio, PhyAddr, MII_BMSR, &Data);
+    Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MII_BMSR, &Data);
 
     if (Data & BMSR_LSTATUS) {
       PhyDev->LinkUp = TRUE;
@@ -345,7 +358,7 @@ MvPhyInit1512 (
 EFI_STATUS
 MvPhyInit (
   IN CONST MARVELL_PHY_PROTOCOL *Snp,
-  IN UINT32 PhyAddr,
+  IN UINT32 PhyIndex,
   IN PHY_CONNECTION PhyConnection,
   IN OUT PHY_DEVICE **OutPhyDev
   )
@@ -353,6 +366,7 @@ MvPhyInit (
   EFI_STATUS Status;
   PHY_DEVICE *PhyDev;
   UINT8 *DeviceIds;
+  UINT8 MdioIndex;
   INTN i;
 
   Status = gBS->LocateProtocol (
@@ -363,12 +377,20 @@ MvPhyInit (
   if (EFI_ERROR(Status))
     return Status;
 
+  MdioIndex = Phy2MdioController[PhyIndex];
+
+  /* Verify correctness of PHY <-> MDIO assignment */
+  if (!MVHW_DEV_ENABLED (Mdio, MdioIndex) || MdioIndex >= Mdio->ControllerCount) {
+    DEBUG ((DEBUG_ERROR, "MvPhyDxe: Incorrect Mdio controller assignment for PHY#%d", PhyIndex));
+    return EFI_INVALID_PARAMETER;
+  }
+
   /* perform setup common for all PHYs */
   PhyDev = AllocateZeroPool (sizeof (PHY_DEVICE));
-  PhyDev->Addr = PhyAddr;
+  PhyDev->Addr = PhySmiAddresses[PhyIndex];
   PhyDev->Connection = PhyConnection;
   DEBUG((DEBUG_INFO, "MvPhyDxe: PhyAddr is %d, connection %d\n",
-        PhyAddr, PhyConnection));
+        PhyDev->Addr, PhyConnection));
   *OutPhyDev = PhyDev;
 
   DeviceIds = PcdGetPtr (PcdPhyDeviceIds);
@@ -377,7 +399,7 @@ MvPhyInit (
     if (MvPhyDevices[i].DevId == DeviceIds[i]) {
       ASSERT (MvPhyDevices[i].DevInit != NULL);
       /* proceed with PHY-specific initialization */
-      return MvPhyDevices[i].DevInit(Snp, PhyAddr, PhyDev);
+      return MvPhyDevices[i].DevInit (Snp, PhyDev);
     }
   }
 
@@ -395,8 +417,8 @@ MvPhyStatus (
 {
   UINT32 Data;
 
-  Mdio->Read(Mdio, PhyDev->Addr, MII_BMSR, &Data);
-  Mdio->Read(Mdio, PhyDev->Addr, MII_BMSR, &Data);
+  Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MII_BMSR, &Data);
+  Mdio->Read (Mdio, PhyDev->Addr, PhyDev->MdioIndex, MII_BMSR, &Data);
 
   if ((Data & BMSR_LSTATUS) == 0) {
     PhyDev->LinkUp = FALSE;
diff --git a/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.h b/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.h
index 6bd06c5..0c3d935 100644
--- a/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.h
+++ b/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.h
@@ -174,7 +174,6 @@ typedef
 EFI_STATUS
 (*MV_PHY_DEVICE_INIT) (
     IN CONST MARVELL_PHY_PROTOCOL *Snp,
-    IN UINT32 PhyAddr,
     IN OUT PHY_DEVICE *PhyDev
     );
 
@@ -187,7 +186,6 @@ STATIC
 EFI_STATUS
 MvPhyInit1512 (
     IN CONST MARVELL_PHY_PROTOCOL *Snp,
-    IN UINT32 PhyAddr,
     IN OUT PHY_DEVICE *PhyDev
     );
 
diff --git a/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.inf b/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.inf
index c262ce4..2abd673 100644
--- a/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.inf
+++ b/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.inf
@@ -63,8 +63,10 @@
   gMarvellPhyProtocolGuid
 
 [Pcd]
-  gMarvellTokenSpaceGuid.PcdPhyConnectionTypes
+  gMarvellTokenSpaceGuid.PcdMdioControllersEnabled
+  gMarvellTokenSpaceGuid.PcdPhy2MdioController
   gMarvellTokenSpaceGuid.PcdPhyDeviceIds
+  gMarvellTokenSpaceGuid.PcdPhySmiAddresses
   gMarvellTokenSpaceGuid.PcdPhyStartupAutoneg
 
 [Depex]
diff --git a/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.c b/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.c
index 620bd5c..2827976 100644
--- a/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.c
+++ b/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.c
@@ -519,14 +519,14 @@ Pp2DxePhyInitialize (
     return Status;
   }
 
-  if (Pp2Context->Port.PhyAddr == 0xff) {
+  if (Pp2Context->Port.PhyIndex == 0xff) {
     /* PHY iniitalization not required */
     return EFI_SUCCESS;
   }
 
   Status = Pp2Context->Phy->Init(
                Pp2Context->Phy,
-               Pp2Context->Port.PhyAddr,
+               Pp2Context->Port.PhyIndex,
                Pp2Context->Port.PhyInterface,
                &Pp2Context->PhyDev
              );
@@ -1147,25 +1147,25 @@ Pp2DxeParsePortPcd (
   IN INTN Index
   )
 {
-  UINT8 *PortIds, *GopIndexes, *PhyConnectionTypes, *AlwaysUp, *Speed, *PhyAddresses;
+  UINT8 *PortIds, *GopIndexes, *PhyConnectionTypes, *AlwaysUp, *Speed, *PhyIndexes;
 
   PortIds = PcdGetPtr (PcdPp2PortIds);
   GopIndexes = PcdGetPtr (PcdPp2GopIndexes);
-  PhyConnectionTypes = PcdGetPtr (PcdPhyConnectionTypes);
-  PhyAddresses = PcdGetPtr (PcdPhySmiAddresses);
+  PhyConnectionTypes = PcdGetPtr (PcdPp2PhyConnectionTypes);
+  PhyIndexes = PcdGetPtr (PcdPp2PhyIndexes);
   AlwaysUp = PcdGetPtr (PcdPp2InterfaceAlwaysUp);
   Speed = PcdGetPtr (PcdPp2InterfaceSpeed);
 
   ASSERT (PcdGetSize (PcdPp2GopIndexes) == PcdGetSize (PcdPp2PortIds));
-  ASSERT (PcdGetSize (PcdPhyConnectionTypes) == PcdGetSize (PcdPp2PortIds));
+  ASSERT (PcdGetSize (PcdPp2PhyConnectionTypes) == PcdGetSize (PcdPp2PortIds));
   ASSERT (PcdGetSize (PcdPp2InterfaceAlwaysUp) == PcdGetSize (PcdPp2PortIds));
   ASSERT (PcdGetSize (PcdPp2InterfaceSpeed) == PcdGetSize (PcdPp2PortIds));
-  ASSERT (PcdGetSize (PcdPhySmiAddresses) == PcdGetSize (PcdPp2PortIds));
+  ASSERT (PcdGetSize (PcdPp2PhyIndexes) == PcdGetSize (PcdPp2PortIds));
 
   Pp2Context->Port.Id = PortIds[Index];
   Pp2Context->Port.GopIndex = GopIndexes[Index];
   Pp2Context->Port.PhyInterface = PhyConnectionTypes[Index];
-  Pp2Context->Port.PhyAddr = PhyAddresses[Index];
+  Pp2Context->Port.PhyIndex = PhyIndexes[Index];
   Pp2Context->Port.AlwaysUp = AlwaysUp[Index];
   Pp2Context->Port.Speed = Speed[Index];
 }
diff --git a/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.h b/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.h
index cde2995..60f40be 100644
--- a/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.h
+++ b/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.h
@@ -327,7 +327,7 @@ struct Pp2DxePort {
   UINT16 RxRingSize;
 
   INT32 PhyInterface;
-  UINTN PhyAddr;
+  UINT32 PhyIndex;
   BOOLEAN Link;
   BOOLEAN Duplex;
   BOOLEAN AlwaysUp;
diff --git a/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.inf b/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.inf
index 752fcc0..b4568d8 100644
--- a/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.inf
+++ b/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.inf
@@ -71,12 +71,12 @@
   gMarvellPhyProtocolGuid
 
 [Pcd]
-  gMarvellTokenSpaceGuid.PcdPhyConnectionTypes
-  gMarvellTokenSpaceGuid.PcdPhySmiAddresses
   gMarvellTokenSpaceGuid.PcdPp2Controllers
   gMarvellTokenSpaceGuid.PcdPp2GopIndexes
   gMarvellTokenSpaceGuid.PcdPp2InterfaceAlwaysUp
   gMarvellTokenSpaceGuid.PcdPp2InterfaceSpeed
+  gMarvellTokenSpaceGuid.PcdPp2PhyConnectionTypes
+  gMarvellTokenSpaceGuid.PcdPp2PhyIndexes
   gMarvellTokenSpaceGuid.PcdPp2Port2Controller
   gMarvellTokenSpaceGuid.PcdPp2PortIds
 
diff --git a/Platform/Marvell/Include/Library/MvHwDescLib.h b/Platform/Marvell/Include/Library/MvHwDescLib.h
index 6ad1bc2..9ae03d0 100644
--- a/Platform/Marvell/Include/Library/MvHwDescLib.h
+++ b/Platform/Marvell/Include/Library/MvHwDescLib.h
@@ -70,6 +70,16 @@ typedef struct {
 } MVHW_I2C_DESC;
 
 //
+// MDIO devices description template definition
+//
+#define MVHW_MAX_MDIO_DEVS         2
+
+typedef struct {
+  UINT8 MdioDevCount;
+  UINTN MdioBaseAddresses[MVHW_MAX_MDIO_DEVS];
+} MVHW_MDIO_DESC;
+
+//
 // NonDiscoverable devices description template definition
 //
 #define MVHW_MAX_XHCI_DEVS         4
@@ -168,6 +178,19 @@ MVHW_I2C_DESC mA7k8kI2cDescTemplate = {\
 }
 
 //
+// Platform description of MDIO devices
+//
+#define MVHW_CP0_MDIO_BASE       0xF212A200
+#define MVHW_CP1_MDIO_BASE       0xF412A200
+
+#define DECLARE_A7K8K_MDIO_TEMPLATE \
+STATIC \
+MVHW_MDIO_DESC mA7k8kMdioDescTemplate = {\
+  2,\
+  { MVHW_CP0_MDIO_BASE, MVHW_CP1_MDIO_BASE }\
+}
+
+//
 // Platform description of NonDiscoverable devices
 //
 #define MVHW_CP0_XHCI0_BASE        0xF2500000
diff --git a/Platform/Marvell/Include/Protocol/Mdio.h b/Platform/Marvell/Include/Protocol/Mdio.h
index 10acad4..d077a8f 100644
--- a/Platform/Marvell/Include/Protocol/Mdio.h
+++ b/Platform/Marvell/Include/Protocol/Mdio.h
@@ -35,6 +35,8 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 #ifndef __MDIO_H__
 #define __MDIO_H__
 
+#include <Library/MvHwDescLib.h>
+
 #define MARVELL_MDIO_PROTOCOL_GUID { 0x40010b03, 0x5f08, 0x496a, { 0xa2, 0x64, 0x10, 0x5e, 0x72, 0xd3, 0x71, 0xaa }}
 
 typedef struct _MARVELL_MDIO_PROTOCOL MARVELL_MDIO_PROTOCOL;
@@ -44,6 +46,7 @@ EFI_STATUS
 (EFIAPI *MARVELL_MDIO_READ) (
   IN CONST MARVELL_MDIO_PROTOCOL *This,
   IN UINT32 PhyAddr,
+  IN UINT32 MdioIndex,
   IN UINT32 RegOff,
   IN UINT32 *Data
   );
@@ -53,6 +56,7 @@ EFI_STATUS
 (EFIAPI *MARVELL_MDIO_WRITE) (
   IN CONST MARVELL_MDIO_PROTOCOL *This,
   IN UINT32 PhyAddr,
+  IN UINT32 MdioIndex,
   IN UINT32 RegOff,
   IN UINT32 Data
   );
@@ -60,6 +64,8 @@ EFI_STATUS
 struct _MARVELL_MDIO_PROTOCOL {
   MARVELL_MDIO_READ Read;
   MARVELL_MDIO_WRITE Write;
+  UINTN BaseAddresses[MVHW_MAX_MDIO_DEVS];
+  UINTN ControllerCount;
 };
 
 extern EFI_GUID gMarvellMdioProtocolGuid;
diff --git a/Platform/Marvell/Include/Protocol/MvPhy.h b/Platform/Marvell/Include/Protocol/MvPhy.h
index a91759a..99c75b3 100644
--- a/Platform/Marvell/Include/Protocol/MvPhy.h
+++ b/Platform/Marvell/Include/Protocol/MvPhy.h
@@ -62,6 +62,7 @@ typedef enum {
 
 typedef struct {
   UINT32          Addr;
+  UINT8           MdioIndex;
   BOOLEAN         LinkUp;
   BOOLEAN         FullDuplex;
   BOOLEAN         AutoNegotiation;
diff --git a/Platform/Marvell/Marvell.dec b/Platform/Marvell/Marvell.dec
index e23607f..0902086 100644
--- a/Platform/Marvell/Marvell.dec
+++ b/Platform/Marvell/Marvell.dec
@@ -160,19 +160,21 @@
   gMarvellTokenSpaceGuid.PcdUtmiPortType|{ 0x0 }|VOID*|0x30000207
 
 #MDIO
-  gMarvellTokenSpaceGuid.PcdMdioBaseAddress|0|UINT64|0x3000043
+  gMarvellTokenSpaceGuid.PcdMdioControllersEnabled|{ 0x0 }|VOID*|0x3000043
 
 #PHY
-  gMarvellTokenSpaceGuid.PcdPhyConnectionTypes|{ 0x0 }|VOID*|0x3000044
+  gMarvellTokenSpaceGuid.PcdPhy2MdioController|{ 0x0 }|VOID*|0x3000027
   gMarvellTokenSpaceGuid.PcdPhyDeviceIds|{ 0x0 }|VOID*|0x3000095
+  gMarvellTokenSpaceGuid.PcdPhySmiAddresses|{ 0x0 }|VOID*|0x3000024
   gMarvellTokenSpaceGuid.PcdPhyStartupAutoneg|FALSE|BOOLEAN|0x3000070
 
 #NET
-  gMarvellTokenSpaceGuid.PcdPhySmiAddresses|{ 0x0 }|VOID*|0x3000024
   gMarvellTokenSpaceGuid.PcdPp2Controllers|{ 0x0 }|VOID*|0x3000028
   gMarvellTokenSpaceGuid.PcdPp2GopIndexes|{ 0x0 }|VOID*|0x3000029
   gMarvellTokenSpaceGuid.PcdPp2InterfaceAlwaysUp|{ 0x0 }|VOID*|0x300002A
   gMarvellTokenSpaceGuid.PcdPp2InterfaceSpeed|{ 0x0 }|VOID*|0x300002B
+  gMarvellTokenSpaceGuid.PcdPp2PhyConnectionTypes|{ 0x0 }|VOID*|0x3000044
+  gMarvellTokenSpaceGuid.PcdPp2PhyIndexes|{ 0x0 }|VOID*|0x3000045
   gMarvellTokenSpaceGuid.PcdPp2Port2Controller|{ 0x0 }|VOID*|0x300002D
   gMarvellTokenSpaceGuid.PcdPp2PortIds|{ 0x0 }|VOID*|0x300002C
 
diff --git a/Silicon/Marvell/Documentation/PortingGuide.txt b/Silicon/Marvell/Documentation/PortingGuide.txt
index fa429d1..f0da515 100644
--- a/Silicon/Marvell/Documentation/PortingGuide.txt
+++ b/Silicon/Marvell/Documentation/PortingGuide.txt
@@ -126,25 +126,15 @@ PHY Driver configuration
 MvPhyDxe provides basic initialization and status routines for Marvell PHYs.
 Currently only 1518 series PHYs are supported. Following PCDs are required:
 
-  - gMarvellTokenSpaceGuid.PcdPhyConnectionTypes
-	(list of values corresponding to PHY_CONNECTION enum)
   - gMarvellTokenSpaceGuid.PcdPhyStartupAutoneg
 	(boolean - if true, driver waits for autonegotiation on startup)
   - gMarvellTokenSpaceGuid.PcdPhyDeviceIds
 	(list of values corresponding to MV_PHY_DEVICE_ID enum)
+  - gMarvellTokenSpaceGuid.PcdPhySmiAddresses
+	(addresses of PHY devices)
+  - gMarvellTokenSpaceGuid.PcdPhy2MdioController
+	(Array specifying, which Mdio controller the PHY is attached to)
 
-PHY_CONNECTION enum type is defined as follows:
-
-		typedef enum {
-			0    PHY_CONNECTION_RGMII,
-			1    PHY_CONNECTION_RGMII_ID,
-			2    PHY_CONNECTION_RGMII_TXID,
-			3    PHY_CONNECTION_RGMII_RXID,
-			4    PHY_CONNECTION_SGMII,
-			5    PHY_CONNECTION_RTBI,
-			6    PHY_CONNECTION_XAUI,
-			7    PHY_CONNECTION_RXAUI
-		} PHY_CONNECTION;
 
 MV_PHY_DEVICE_ID:
 
@@ -153,11 +143,8 @@ MV_PHY_DEVICE_ID:
 		} MV_PHY_DEVICE_ID;
 
 It should be extended when adding support for other PHY models.
-Thus in order to set RGMII for 1st PHY and SGMII for 2nd, PCD should be:
-
- gMarvellTokenSpaceGuid.PcdPhyConnectionTypes|{ 0x0, 0x4 }
 
-with disabled autonegotiation:
+Disable autonegotiation:
 
  gMarvellTokenSpaceGuid.PcdPhyStartupAutoneg|FALSE
 
@@ -171,8 +158,9 @@ MDIO configuration
 MDIO driver provides access to network PHYs' registers via EFI_MDIO_READ and
 EFI_MDIO_WRITE functions (EFI_MDIO_PROTOCOL). Following PCD is required:
 
-  - gMarvellTokenSpaceGuid.PcdMdioBaseAddress
-	(base address of SMI management register)
+  - gMarvellTokenSpaceGuid.PcdMdioControllers
+	(Array with used controllers
+	 Set to 0x1 for enabled, 0x0 for disabled)
 
 
 I2C configuration
@@ -249,8 +237,24 @@ are required to operate:
   - gMarvellTokenSpaceGuid.PcdPp2Port2Controller
 	(Array specifying, to which controller the port belongs to)
 
-  - gMarvellTokenSpaceGuid.PcdPhySmiAddresses
-	(Addresses of PHY devices)
+  - gMarvellTokenSpaceGuid.PcdPp2PhyConnectionTypes
+	(Indicates speed of the network interface:
+
+	PHY_RGMII                        0x0
+	PHY_RGMII_ID                     0x1
+	PHY_RGMII_TXID                   0x2
+	PHY_RGMII_RXID                   0x3
+	PHY_SGMII                        0x4
+	PHY_RTBI                         0x5
+	PHY_XAUI                         0x6
+	PHY_RXAUI                        0x7
+	PHY_SFI                          0x8 )
+
+  - gMarvellTokenSpaceGuid.PcdPp2PhyIndexes
+	(Array specifying, to which PHY from
+	 gMarvellTokenSpaceGuid.PcdPhyDeviceIds is used. If none,
+	 e.g. in 10G SFI in-band link detection, 0xFF value must
+	 be specified)
 
   - gMarvellTokenSpaceGuid.PcdPp2PortIds
 	(Identificators of PP2 ports)
@@ -262,17 +266,13 @@ are required to operate:
 	(Set to 0x1 for always-up interface, 0x0 otherwise)
 
   - gMarvellTokenSpaceGuid.PcdPp2InterfaceSpeed
-	(Values corresponding to PHY_SPEED enum.
-	 PHY_SPEED is defined as follows:
-
-		  typedef enum {
-			  0  NO_SPEED,
-			  1  SPEED_10,
-			  2  SPEED_100,
-			  3  SPEED_1000,
-			  4  SPEED_2500,
-			  5  SPEED_10000
-		  } PHY_SPEED;
+	(Indicates speed of the network interface:
+
+	PHY_SPEED_10                     0x1
+	PHY_SPEED_100                    0x2
+	PHY_SPEED_1000                   0x3
+	PHY_SPEED_2500                   0x4
+	PHY_SPEED_10000                  0x5 )
 
 
 UTMI PHY configuration
-- 
1.8.3.1