From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, neta@marvell.com, kostap@marvell.com,
jinghua@marvell.com, mw@semihalf.com, jsd@semihalf.com
Subject: [platforms: PATCH v2 3/8] Marvell/Armada: Remove custom reset library residues
Date: Wed, 25 Oct 2017 08:45:25 +0200 [thread overview]
Message-ID: <1508913930-30886-4-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1508913930-30886-1-git-send-email-mw@semihalf.com>
When switching to generic PSCI reset library, obsolete parts
of previous custom reset library (PCDs, documentation) remained.
Remove them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
---
Platform/Marvell/Armada/Armada70x0.dsc | 4 ----
Platform/Marvell/Marvell.dec | 4 ----
Silicon/Marvell/Documentation/PortingGuide.txt | 9 ---------
3 files changed, 17 deletions(-)
diff --git a/Platform/Marvell/Armada/Armada70x0.dsc b/Platform/Marvell/Armada/Armada70x0.dsc
index 430803c..946c93e 100644
--- a/Platform/Marvell/Armada/Armada70x0.dsc
+++ b/Platform/Marvell/Armada/Armada70x0.dsc
@@ -138,9 +138,5 @@
gMarvellTokenSpaceGuid.PcdPciEAhci|{ 0x1, 0x0 }
gMarvellTokenSpaceGuid.PcdPciESdhci|{ 0x1, 0x1 }
- #ResetLib
- gMarvellTokenSpaceGuid.PcdResetRegAddress|0xf06f0084
- gMarvellTokenSpaceGuid.PcdResetRegMask|0x1
-
#RTC
gMarvellTokenSpaceGuid.PcdRtcEnabled|{ 0x1 }
diff --git a/Platform/Marvell/Marvell.dec b/Platform/Marvell/Marvell.dec
index 78f5e53..434d6cb 100644
--- a/Platform/Marvell/Marvell.dec
+++ b/Platform/Marvell/Marvell.dec
@@ -188,10 +188,6 @@
gMarvellTokenSpaceGuid.PcdPciEAhci|{ 0x0 }|VOID*|0x3000034
gMarvellTokenSpaceGuid.PcdPciESdhci|{ 0x0 }|VOID*|0x3000035
-#ResetLib
- gMarvellTokenSpaceGuid.PcdResetRegAddress|0|UINT64|0x40000050
- gMarvellTokenSpaceGuid.PcdResetRegMask|0|UINT32|0x4000051
-
#RTC
gMarvellTokenSpaceGuid.PcdRtcEnabled|{ 0x0 }|VOID*|0x40000052
diff --git a/Silicon/Marvell/Documentation/PortingGuide.txt b/Silicon/Marvell/Documentation/PortingGuide.txt
index 66ec918..cbe3bed 100644
--- a/Silicon/Marvell/Documentation/PortingGuide.txt
+++ b/Silicon/Marvell/Documentation/PortingGuide.txt
@@ -383,15 +383,6 @@ Set pin 6 and 7 to 0xa function:
gMarvellTokenSpaceGuid.PcdChip0MppSel0|{ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xa, 0xa, 0x0, 0x0 }
-MarvellResetSystemLib configuration
-===================================
-This simple library allows to mask given bits in given reg at UEFI 'reset'
-command call. These variables are configurable through PCDs:
-
- - gMarvellTokenSpaceGuid.PcdResetRegAddress
- - gMarvellTokenSpaceGuid.PcdResetRegMask
-
-
Ramdisk configuration
=====================
There is one PCD available for Ramdisk configuration
--
2.7.4
next prev parent reply other threads:[~2017-10-25 6:43 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-25 6:45 [platforms: PATCH v2 0/8] Armada 7k/8k - memory improvements Marcin Wojtas
2017-10-25 6:45 ` [platforms: PATCH v2 1/8] Marvell/Armada: Implement EFI_RNG_PROTOCOL driver for EIP76 TRNG Marcin Wojtas
2017-10-25 10:44 ` Leif Lindholm
2017-10-25 6:45 ` [platforms: PATCH v2 2/8] Marvell/Armada: Increase preallocated memory region size Marcin Wojtas
2017-10-25 6:45 ` Marcin Wojtas [this message]
2017-10-25 6:45 ` [platforms: PATCH v2 4/8] Marvell/Armada: Add support from DRAM remapping Marcin Wojtas
2017-10-25 10:53 ` Leif Lindholm
2017-10-25 6:45 ` [platforms: PATCH v2 5/8] Marvell/Armada: Add MemoryInitPeiLib that reserves secure region Marcin Wojtas
2017-10-25 6:45 ` [platforms: PATCH v2 6/8] Marvell/Armada: Enable dynamic DRAM size detection Marcin Wojtas
2017-10-25 12:26 ` Leif Lindholm
2017-10-25 6:45 ` [platforms: PATCH v2 7/8] Marvell/Armada: Armada70x0Lib: Add support for 32-bit ARM Marcin Wojtas
2017-10-25 6:45 ` [platforms: PATCH v2 8/8] Marvell/Armada: Add 32-bit ARM support Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508913930-30886-4-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox