From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, neta@marvell.com, kostap@marvell.com,
jinghua@marvell.com, mw@semihalf.com, jsd@semihalf.com
Subject: [platforms: PATCH v2 6/8] Marvell/Armada: Enable dynamic DRAM size detection
Date: Wed, 25 Oct 2017 08:45:28 +0200 [thread overview]
Message-ID: <1508913930-30886-7-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1508913930-30886-1-git-send-email-mw@semihalf.com>
Instead of using hardcoded value in PcdSystemMemorySize PCD,
obtain DRAM size directly from SoC registers, which are filled
by firmware during early initialization stage.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.c | 62 +++++++++++++++++++-
Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.h | 25 ++++++++
2 files changed, 86 insertions(+), 1 deletion(-)
diff --git a/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.c b/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.c
index 978e4d3..bf0ebcf 100644
--- a/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.c
+++ b/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.c
@@ -50,6 +50,60 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
STATIC ARM_MEMORY_REGION_DESCRIPTOR mVirtualMemoryTable[MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS];
+// Obtain DRAM size basing on register values filled by early firmware.
+STATIC
+UINT64
+GetDramSize (
+ IN OUT UINT64 *MemSize
+ )
+{
+ UINT64 BaseAddr;
+ UINT8 RegionCode;
+ UINT8 Cs;
+
+ *MemSize = 0;
+
+ for (Cs = 0; Cs < DRAM_MAX_CS_NUM; Cs++) {
+
+ /* Exit loop on first disabled DRAM CS */
+ if (!DRAM_CS_ENABLED (Cs)) {
+ break;
+ }
+
+ /*
+ * Sanity check for base address of next DRAM block.
+ * Only continuous space will be used.
+ */
+ BaseAddr = GET_DRAM_REGION_BASE (Cs);
+ if (BaseAddr != *MemSize) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: DRAM blocks are not contiguous, limit size to 0x%llx\n",
+ __FUNCTION__,
+ *MemSize));
+ return EFI_SUCCESS;
+ }
+
+ /* Decode area length for current CS from register value */
+ RegionCode = GET_DRAM_REGION_SIZE_CODE (Cs);
+ if (DRAM_REGION_SIZE_CODE_INVALID (RegionCode)) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Invalid memory region code (0x%x) for CS#%d\n",
+ __FUNCTION__,
+ RegionCode,
+ Cs));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (RegionCode <= 0x4) {
+ *MemSize += GET_DRAM_REGION_SIZE_ODD (RegionCode);
+ } else {
+ *MemSize += GET_DRAM_REGION_SIZE_EVEN (RegionCode);
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
/**
Return the Virtual Memory Map of your platform
@@ -72,12 +126,18 @@ ArmPlatformGetVirtualMemoryMap (
UINT64 MemHighSize;
UINT64 ConfigSpaceBaseAddr;
EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttributes;
+ EFI_STATUS Status;
ASSERT (VirtualMemoryMap != NULL);
ConfigSpaceBaseAddr = FixedPcdGet64 (PcdConfigSpaceBaseAddress);
- MemSize = FixedPcdGet64 (PcdSystemMemorySize);
+ // Obtain total memory size from the hardware.
+ Status = GetDramSize (&MemSize);
+ if (EFI_ERROR (Status)) {
+ MemSize = FixedPcdGet64 (PcdSystemMemorySize);
+ DEBUG ((DEBUG_ERROR, "Limit total memory size to %d MB\n", MemSize / 1024 / 1024));
+ }
if (DRAM_REMAP_ENABLED) {
MemLowSize = MIN (DRAM_REMAP_TARGET, MemSize);
diff --git a/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.h b/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.h
index 8101cf3..dd218d9 100644
--- a/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.h
+++ b/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.h
@@ -46,3 +46,28 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
(MmioRead32 (CCU_MC_RCR_REG) & REMAP_SIZE_MASK) + SIZE_1MB
#define DRAM_REMAP_TARGET \
(MmioRead32 (CCU_MC_RTBR_REG) << TARGET_BASE_OFFS)
+
+#define DRAM_CH0_MMAP_LOW_REG(cs) (0xf0020200 + (cs) * 0x8)
+#define DRAM_CS_VALID_ENABLED_MASK 0x1
+#define DRAM_AREA_LENGTH_OFFS 16
+#define DRAM_AREA_LENGTH_MASK (0x1f << DRAM_AREA_LENGTH_OFFS)
+#define DRAM_START_ADDRESS_L_OFFS 23
+#define DRAM_START_ADDRESS_L_MASK (0x1ff << DRAM_START_ADDRESS_L_OFFS)
+#define DRAM_CH0_MMAP_HIGH_REG(cs) (0xf0020204 + (cs) * 0x8)
+#define DRAM_START_ADDR_HTOL_OFFS 32
+
+#define DRAM_MAX_CS_NUM 8
+
+#define DRAM_CS_ENABLED(Cs) \
+ (MmioRead32 (DRAM_CH0_MMAP_LOW_REG (Cs)) & DRAM_CS_VALID_ENABLED_MASK)
+#define GET_DRAM_REGION_BASE(Cs) \
+ ((UINT64)MmioRead32 (DRAM_CH0_MMAP_HIGH_REG ((Cs))) << \
+ DRAM_START_ADDR_HTOL_OFFS) | \
+ (MmioRead32 (DRAM_CH0_MMAP_LOW_REG (Cs)) & DRAM_START_ADDRESS_L_MASK);
+#define GET_DRAM_REGION_SIZE_CODE(Cs) \
+ (MmioRead32 (DRAM_CH0_MMAP_LOW_REG ((Cs))) & \
+ DRAM_AREA_LENGTH_MASK) >> DRAM_AREA_LENGTH_OFFS
+#define DRAM_REGION_SIZE_CODE_INVALID(C) \
+ (((C) > 0x4 && (C) < 0x7) || (C) > 0x1b)
+#define GET_DRAM_REGION_SIZE_ODD(C) ((UINT64)0x18000000 << (C))
+#define GET_DRAM_REGION_SIZE_EVEN(C) ((UINT64)1 << ((C) + 16))
--
2.7.4
next prev parent reply other threads:[~2017-10-25 6:43 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-25 6:45 [platforms: PATCH v2 0/8] Armada 7k/8k - memory improvements Marcin Wojtas
2017-10-25 6:45 ` [platforms: PATCH v2 1/8] Marvell/Armada: Implement EFI_RNG_PROTOCOL driver for EIP76 TRNG Marcin Wojtas
2017-10-25 10:44 ` Leif Lindholm
2017-10-25 6:45 ` [platforms: PATCH v2 2/8] Marvell/Armada: Increase preallocated memory region size Marcin Wojtas
2017-10-25 6:45 ` [platforms: PATCH v2 3/8] Marvell/Armada: Remove custom reset library residues Marcin Wojtas
2017-10-25 6:45 ` [platforms: PATCH v2 4/8] Marvell/Armada: Add support from DRAM remapping Marcin Wojtas
2017-10-25 10:53 ` Leif Lindholm
2017-10-25 6:45 ` [platforms: PATCH v2 5/8] Marvell/Armada: Add MemoryInitPeiLib that reserves secure region Marcin Wojtas
2017-10-25 6:45 ` Marcin Wojtas [this message]
2017-10-25 12:26 ` [platforms: PATCH v2 6/8] Marvell/Armada: Enable dynamic DRAM size detection Leif Lindholm
2017-10-25 6:45 ` [platforms: PATCH v2 7/8] Marvell/Armada: Armada70x0Lib: Add support for 32-bit ARM Marcin Wojtas
2017-10-25 6:45 ` [platforms: PATCH v2 8/8] Marvell/Armada: Add 32-bit ARM support Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508913930-30886-7-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox