From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, neta@marvell.com, kostap@marvell.com,
jinghua@marvell.com, mw@semihalf.com, jsd@semihalf.com
Subject: [platforms: PATCH v3 0/8] Armada 7k/8k - memory improvements
Date: Wed, 25 Oct 2017 17:18:10 +0200 [thread overview]
Message-ID: <1508944693-16315-1-git-send-email-mw@semihalf.com> (raw)
Hi,
In the third round I resend only 3 patches.
The patches are available in the github:
https://github.com/MarvellEmbeddedProcessors/edk2-open-platform/commits/mem-upstream-r20171025-2
Best regards,
Marcin
Changelog:
v2->v3
1/8
- Add RB
4/8
- Improve and correct commit message
6/8
- Improve if statement for decoding region size code
v1->v2
1/8
- Add comment for calling Stall
4/8
- s/VirtualMemoryTable/mVirtualMemoryTable/
- restore ASSERT for table elements
- correct commit log (s/ATF/ARM-TF/)
- add dynamic remap enable/parameters detection
- move config space base address to PCD
- use macros
6/8
- s/DramSizeGet/GetDramSize/
- add 'IN OUT' to GetDramSize argument
- s/AreaLengthMap/RegionCode/
- use macros to hide arithmetics and increase readability
- replace humongous switch/case with small if/else
2/8, 3/8, 5/8, 7/8, 8/8
- Add RBs
Ard Biesheuvel (5):
Marvell/Armada: Implement EFI_RNG_PROTOCOL driver for EIP76 TRNG
Marvell/Armada: Increase preallocated memory region size
Marvell/Armada: Add MemoryInitPeiLib that reserves secure region
Marvell/Armada: Armada70x0Lib: Add support for 32-bit ARM
Marvell/Armada: Add 32-bit ARM support
Marcin Wojtas (3):
Marvell/Armada: Remove custom reset library residues
Marvell/Armada: Add support for DRAM remapping
Marvell/Armada: Enable dynamic DRAM size detection
Platform/Marvell/Armada/Armada.dsc.inc | 21 +-
Platform/Marvell/Armada/Armada70x0.dsc | 8 +-
Platform/Marvell/Armada/Armada70x0.fdf | 3 +-
Platform/Marvell/Armada/Drivers/Armada70x0RngDxe/Armada70x0RngDxe.c | 255 ++++++++++++++++++++
Platform/Marvell/Armada/Drivers/Armada70x0RngDxe/Armada70x0RngDxe.inf | 47 ++++
Platform/Marvell/Armada/Library/Armada70x0Lib/ARM/ArmPlatformHelper.S | 77 ++++++
Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0Lib.inf | 5 +
Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.c | 149 ++++++++++--
Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.h | 73 ++++++
Platform/Marvell/Armada/Library/Armada70x0MemoryInitPeiLib/Armada70x0MemoryInitPeiLib.c | 158 ++++++++++++
Platform/Marvell/Armada/Library/Armada70x0MemoryInitPeiLib/Armada70x0MemoryInitPeiLib.inf | 46 ++++
Platform/Marvell/Marvell.dec | 18 +-
Silicon/Marvell/Documentation/PortingGuide.txt | 9 -
13 files changed, 823 insertions(+), 46 deletions(-)
create mode 100644 Platform/Marvell/Armada/Drivers/Armada70x0RngDxe/Armada70x0RngDxe.c
create mode 100644 Platform/Marvell/Armada/Drivers/Armada70x0RngDxe/Armada70x0RngDxe.inf
create mode 100644 Platform/Marvell/Armada/Library/Armada70x0Lib/ARM/ArmPlatformHelper.S
create mode 100644 Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.h
create mode 100644 Platform/Marvell/Armada/Library/Armada70x0MemoryInitPeiLib/Armada70x0MemoryInitPeiLib.c
create mode 100644 Platform/Marvell/Armada/Library/Armada70x0MemoryInitPeiLib/Armada70x0MemoryInitPeiLib.inf
--
2.7.4
next reply other threads:[~2017-10-25 15:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-25 15:18 Marcin Wojtas [this message]
2017-10-25 15:18 ` [platforms: PATCH v3 1/8] Marvell/Armada: Implement EFI_RNG_PROTOCOL driver for EIP76 TRNG Marcin Wojtas
2017-10-25 15:18 ` [platforms: PATCH v3 4/8] Marvell/Armada: Add support for DRAM remapping Marcin Wojtas
2017-10-25 15:18 ` [platforms: PATCH v3 6/8] Marvell/Armada: Enable dynamic DRAM size detection Marcin Wojtas
2017-10-25 15:55 ` [platforms: PATCH v3 0/8] Armada 7k/8k - memory improvements Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508944693-16315-1-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox